scottk/wlan-lanforge-scripts
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-lanforge-scripts.git synced 2025-11-01 19:28:00 +00:00
Code Issues Packages Projects Releases Wiki Activity

lf_snp_test.py : used common terms upload / download

Browse Source
This commit is contained in:
Chuck SmileyRekiere
2021-04-22 15:49:51 -06:00
parent 848d319567
commit f45b2fd6f2
1 changed files with 32 additions and 32 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
py-scripts/lf_snp_test.py
View File

@@ -10,7 +10,7 @@ This program is to test an AP connected to a controller.
The controler The controler
with with a specific ap mode, wifi mode (2.4 Ghz or 5 Ghz), Bandwidth (20,40,80,160) and TX power. with with a specific ap mode, wifi mode (2.4 Ghz or 5 Ghz), Bandwidth (20,40,80,160) and TX power.
The controller will configure the AP. The controller will configure the AP.
The Lanforge radios are configured for a specific client dencity, Packet type (TCP, UDP), Direction (Downstream, Upstream) and Packet-size. The Lanforge radios are configured for a specific client dencity, Packet type (TCP, UDP), Direction (download, upload) and Packet-size.
The transmission rate will be recorded and compared against the expected rate to determine pass or fail. The transmission rate will be recorded and compared against the expected rate to determine pass or fail.
The results will be recorded in CSV file with the following data The results will be recorded in CSV file with the following data
AP, Band, wifi_mode, Bandwidth, encryption, ap mode, number of clients, packet type, direction, packet size, measured rx bytes, upload bits per second, AP, Band, wifi_mode, Bandwidth, encryption, ap mode, number of clients, packet type, direction, packet size, measured rx bytes, upload bits per second,
@@ -44,7 +44,7 @@ The script is devided into parts:
e. ap_mode : local / flex connect, * ap mode not supported e. ap_mode : local / flex connect, * ap mode not supported
f. clients : number of clients set by controller_client_densities , radios much create associated number of stations Note: LANforge configuration f. clients : number of clients set by controller_client_densities , radios much create associated number of stations Note: LANforge configuration
g. packet_type: lf_udp lf_tcp g. packet_type: lf_udp lf_tcp
h. traffic direction: upstream / downstream h. traffic direction: upload / download
i. packet_size: --side_a_min_pdu, --side_b_min_pdu Note: LANforge configuration i. packet_size: --side_a_min_pdu, --side_b_min_pdu Note: LANforge configuration
2. Traffic Generation Class : L3VariableTime 2. Traffic Generation Class : L3VariableTime
@@ -79,11 +79,11 @@ Test configurations take presidence to command line parameters
Using Coded Test Configuration --controller_test_1 Using Coded Test Configuration --controller_test_1
./lf_snp_test.py -controller_ip 10.195.197.234 --controller_user admin --controller_passwd Milpitas@123 ./lf_snp_test.py -controller_ip 10.195.197.234 --controller_user admin --controller_passwd Milpitas@123
--controller_series "9800" --endp_types 'lf_udp' --upstream_port eth2 --controller_prompt "WLC" --controller_test_1 --controller_series "9800" --endp_types 'lf_udp' --upload_port eth2 --controller_prompt "WLC" --controller_test_1
--print_test_config --print_test_config
Using Coded Test Configuration: Using Coded Test Configuration:
./lf_snp_test.py -cc 192.168.100.112 -cu admin -cpw Cisco123 -cca APA453.0E7B.CF9C -cs "3504" --endp_types 'lf_udp' --upstream_port eth2 --controller_test_3 ./lf_snp_test.py -cc 192.168.100.112 -cu admin -cpw Cisco123 -cca APA453.0E7B.CF9C -cs "3504" --endp_types 'lf_udp' --upload_port eth2 --controller_test_3
--controller_prompt "(Cisco Controller)" --controller_prompt "(Cisco Controller)"
--print_test_config --print_test_config
@@ -94,13 +94,13 @@ Using Commandline with defaults:
Using Commandline: Using Commandline:
./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_aps APA453.0E7B.CF9C ./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_aps APA453.0E7B.CF9C
--controller_series "3504" --upstream_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "a" --controller_chan_5ghz "36" --controller_series "3504" --upload_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "a" --controller_chan_5ghz "36"
--radio "radio==1.wiphy0 stations==10 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==ac" --controller_client_densities "10" --radio "radio==1.wiphy0 stations==10 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==ac" --controller_client_densities "10"
--print_test_config --print_test_config
Using Commandline: Setting --test_duration "20s" --polling_interval to 5s -ccd "2" (--controller_client_densities) Using Commandline: Setting --test_duration "20s" --polling_interval to 5s -ccd "2" (--controller_client_densities)
./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_aps APA453.0E7B.CF9C ./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_aps APA453.0E7B.CF9C
--controller_series "3504" --upstream_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "auto" --controller_chan_5ghz "36" --controller_series "3504" --upload_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "auto" --controller_chan_5ghz "36"
--radio "radio==1.wiphy0 stations==2 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==an" --controller_client_densities "2" --radio "radio==1.wiphy0 stations==2 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==an" --controller_client_densities "2"
--print_test_config --print_test_config
@@ -120,7 +120,7 @@ SAMPLE TEST CONFIG: --controller_test_1 output from --print_test_config option
2021-04-21 05:43:25,041 __main__ INFO: controller_client_densities ('-ccd','--controller_client_densities'): ['1', '10', '50', '200'] 2021-04-21 05:43:25,041 __main__ INFO: controller_client_densities ('-ccd','--controller_client_densities'): ['1', '10', '50', '200']
2021-04-21 05:43:25,041 __main__ INFO: controller_packet_types ('-t', '--endp_types'): ['lf_udp', 'lf_tcp'] 2021-04-21 05:43:25,041 __main__ INFO: controller_packet_types ('-t', '--endp_types'): ['lf_udp', 'lf_tcp']
2021-04-21 05:43:25,041 __main__ INFO: controller_packet_sizes ('-cps','--controller_packet_sizes'): ['88', '512', '1370', '1518'] 2021-04-21 05:43:25,041 __main__ INFO: controller_packet_sizes ('-cps','--controller_packet_sizes'): ['88', '512', '1370', '1518']
2021-04-21 05:43:25,041 __main__ INFO: controller_directions ('-cd', '--controller_directions'): ['upstream', 'downstream'] 2021-04-21 05:43:25,041 __main__ INFO: controller_directions ('-cd', '--controller_directions'): ['upload', 'download']
2021-04-21 05:43:25,041 __main__ INFO: controller_data_encryptions ('-cde','--controller_data_encryptions') ['disable'] 2021-04-21 05:43:25,041 __main__ INFO: controller_data_encryptions ('-cde','--controller_data_encryptions') ['disable']
2021-04-21 05:43:25,041 __main__ INFO: controller_side_a_tx_min_bps ('-amr','--side_a_tx_min_bps'): 256000 2021-04-21 05:43:25,041 __main__ INFO: controller_side_a_tx_min_bps ('-amr','--side_a_tx_min_bps'): 256000
2021-04-21 05:43:25,041 __main__ INFO: controller_side_b_tx_min_bps ('-bmr','--side_b_tx_min_bps'): 256000 2021-04-21 05:43:25,041 __main__ INFO: controller_side_b_tx_min_bps ('-bmr','--side_b_tx_min_bps'): 256000
@@ -1066,7 +1066,7 @@ class L3VariableTime(Realm):
for key in [key for key in new_list if "mtx" in key]: del new_list[key] for key in [key for key in new_list if "mtx" in key]: del new_list[key]
filtered_values = [v for _, v in new_list.items() if v !=0] filtered_values = [v for _, v in new_list.items() if v !=0]
# Evaluate Upstream or Downstream # Evaluate upload or download
new_evaluate_list = new_list.copy() new_evaluate_list = new_list.copy()
print("new_evaluate_list before",new_evaluate_list) print("new_evaluate_list before",new_evaluate_list)
# look at ul and dl # look at ul and dl
@@ -1074,9 +1074,9 @@ class L3VariableTime(Realm):
if len(old_evaluate_list) == len(new_evaluate_list): if len(old_evaluate_list) == len(new_evaluate_list):
for item, value in old_evaluate_list.items(): for item, value in old_evaluate_list.items():
# check only upstream or downstream - expected passes corresponds to traffic only in observed direction # check only upload or download - expected passes corresponds to traffic only in observed direction
if "upstream" in self.test_config_dict.values() and item.endswith("-B") \ if "upload" in self.test_config_dict.values() and item.endswith("-B") \
or "downstream" in self.test_config_dict.values() and item.endswith("-A"): or "download" in self.test_config_dict.values() and item.endswith("-A"):
expected_passes +=1 expected_passes +=1
print("ITEM: {} VALUE: {}".format(item, value)) print("ITEM: {} VALUE: {}".format(item, value))
if new_evaluate_list[item] > old_evaluate_list[item]: if new_evaluate_list[item] > old_evaluate_list[item]:
@@ -1084,12 +1084,12 @@ class L3VariableTime(Realm):
#if self.debug: logg.info(item, new_evaluate_list[item], old_evaluate_list[item], " Difference: ", new_evaluate_list[item] - old_evaluate_list[item]) #if self.debug: logg.info(item, new_evaluate_list[item], old_evaluate_list[item], " Difference: ", new_evaluate_list[item] - old_evaluate_list[item])
print(item, new_evaluate_list[item], old_evaluate_list[item], " Difference: ", new_evaluate_list[item] - old_evaluate_list[item]) print(item, new_evaluate_list[item], old_evaluate_list[item], " Difference: ", new_evaluate_list[item] - old_evaluate_list[item])
else: else:
if "upstream" in self.test_config_dict.values() and item.endswith("-B") \ if "upload" in self.test_config_dict.values() and item.endswith("-B") \
or "downstream" in self.test_config_dict.values() and item.endswith("-A"): or "download" in self.test_config_dict.values() and item.endswith("-A"):
# only a failure if expecting traffic in that direction # only a failure if expecting traffic in that direction
print("Failed to increase rx bytes: ", item, new_evaluate_list[item], old_evaluate_list[item]) print("Failed to increase rx bytes: ", item, new_evaluate_list[item], old_evaluate_list[item])
if not self.csv_started: if not self.csv_started:
# stations that end in -A are dl (download, downstream), stations that end in -B are ul (upload, upstream) # stations that end in -A are dl (download, download), stations that end in -B are ul (upload, upload)
if item.endswith("-A"): if item.endswith("-A"):
csv_rx_headers.append(item+'-dl-rx-bytes') csv_rx_headers.append(item+'-dl-rx-bytes')
else: else:
@@ -1437,17 +1437,17 @@ Use --print_test_config at end of command to see test configuration
Test configurations take presidence to command line parameters Test configurations take presidence to command line parameters
Using Coded Test Configuration: Using Coded Test Configuration:
./lf_snp_test.py -cc 192.168.100.112 -cu admin -cpw Cisco123 -cca APA453.0E7B.CF9C -cs "3504" --endp_type 'lf_udp' --upstream_port eth2 --controller_test_3 ./lf_snp_test.py -cc 192.168.100.112 -cu admin -cpw Cisco123 -cca APA453.0E7B.CF9C -cs "3504" --endp_type 'lf_udp' --upload_port eth2 --controller_test_3
--controller_prompt "(Cisco Controller)" --print_test_config --controller_prompt "(Cisco Controller)" --print_test_config
Using Commandline with defaults: Using Commandline with defaults:
./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_ap APA453.0E7B.CF9C --controller_series "3504" ./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_ap APA453.0E7B.CF9C --controller_series "3504"
--upstream_port eth2 --controller_prompt "(Cisco Controller)" --radio "radio==1.wiphy0 stations==1 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==auto" --upload_port eth2 --controller_prompt "(Cisco Controller)" --radio "radio==1.wiphy0 stations==1 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==auto"
--print_test_config --print_test_config
Using Commandline Less Interations: Using Commandline Less Interations:
./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_ap APA453.0E7B.CF9C ./lf_snp_test.py --controller_ip 192.168.100.112 --controller_user admin --controller_passwd Cisco123 --controller_ap APA453.0E7B.CF9C
--controller_series "3504" --upstream_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "auto" --controller_wifimode "a" --controller_series "3504" --upload_port eth2 --controller_prompt "(Cisco Controller)" --controller_wifimode "auto" --controller_wifimode "a"
--controller_chan_5ghz "36" --radio "radio==1.wiphy0 stations==1 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==auto" --controller_chan_5ghz "36" --radio "radio==1.wiphy0 stations==1 ssid==test_candela ssid_pw==[BLANK] security==open wifimode==auto"
--print_test_config --print_test_config
@@ -1465,7 +1465,7 @@ AP {Axel, Vanc} Dynamic
AP-mode {local/flexconnect} Common AP-mode {local/flexconnect} Common
client-density {1, 10, 20, 50, 100, 200} Dynamic client-density {1, 10, 20, 50, 100, 200} Dynamic
Packet-type {TCP, UDP} Common Packet-type {TCP, UDP} Common
Direction {Downstream, Upstream} Direction {download, upload}
Packet-size { 88, 512, 1370, 1518} Common Packet-size { 88, 512, 1370, 1518} Common
Time (4 iterations of 30 sec and get the best average out of it) Time (4 iterations of 30 sec and get the best average out of it)
############################################# #############################################
@@ -1705,8 +1705,8 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
parser.add_argument('-db','--debug', help='--debug: Enable debugging',action='store_true') parser.add_argument('-db','--debug', help='--debug: Enable debugging',action='store_true')
parser.add_argument('-t', '--endp_types', help='--endp_types <types of traffic> example --endp_types \"lf_udp lf_tcp\" Default: lf_udp lf_tcp, options: lf_udp, lf_udp6, lf_tcp, lf_tcp6, mc_udp, mc_udp6', parser.add_argument('-t', '--endp_types', help='--endp_types <types of traffic> example --endp_types \"lf_udp lf_tcp\" Default: lf_udp lf_tcp, options: lf_udp, lf_udp6, lf_tcp, lf_tcp6, mc_udp, mc_udp6',
default='lf_udp lf_tcp', type=valid_endp_types) default='lf_udp lf_tcp', type=valid_endp_types)
parser.add_argument('-cd', '--controller_directions', help='--controller_directions <upstream downstream> example --controller_directions \"upstream downstream\" Default: upstream downstream', default='upstream downstream') parser.add_argument('-cd', '--controller_directions', help='--controller_directions <upload download> example --controller_directions \"upload download\" Default: upload download', default='upload download')
parser.add_argument('-u', '--upstream_port', help='--upstream_port <cross connect upstream_port> example: --upstream_port eth1',default='eth1') parser.add_argument('-u', '--upload_port', help='--upload_port <cross connect upload_port> example: --upload_port eth1',default='eth1')
parser.add_argument('-o','--csv_outfile', help="--csv_outfile <Output file for csv data>", default='snp') parser.add_argument('-o','--csv_outfile', help="--csv_outfile <Output file for csv data>", default='snp')
parser.add_argument("-l", "--log", action='store_true', help="create logfile for messages, default stdout") parser.add_argument("-l", "--log", action='store_true', help="create logfile for messages, default stdout")
parser.add_argument('-c','--csv_output', help="Generate csv output", default=True) parser.add_argument('-c','--csv_output', help="Generate csv output", default=True)
@@ -1714,8 +1714,8 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
parser.add_argument('-r','--radio', action='append', nargs=1, help='--radio \ parser.add_argument('-r','--radio', action='append', nargs=1, help='--radio \
\"radio==<number_of_wiphy stations=<=number of stations> ssid==<ssid> ssid_pw==<ssid password> security==<security> wifimode==<wifimode>\" '\ \"radio==<number_of_wiphy stations=<=number of stations> ssid==<ssid> ssid_pw==<ssid password> security==<security> wifimode==<wifimode>\" '\
, required=False) , required=False)
parser.add_argument('-ul_bps','--side_a_tx_min_bps', help='--side_a_tx_min_bps , requested downstream min tx rate bits per second default 256000', default=256000) parser.add_argument('-ul_bps','--side_a_tx_min_bps', help='--side_a_tx_min_bps , requested download min tx rate bits per second default 256000', default=256000)
parser.add_argument('-dl_bps','--side_b_tx_min_bps', help='--side_b_tx_min_bps , requested upstream min tx rate bits per second default 256000', default=256000) parser.add_argument('-dl_bps','--side_b_tx_min_bps', help='--side_b_tx_min_bps , requested upload min tx rate bits per second default 256000', default=256000)
############################################## ##############################################
# Parameters Used For Testing # Parameters Used For Testing
@@ -1755,8 +1755,8 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
if args.mgr: if args.mgr:
lfjson_host = args.mgr lfjson_host = args.mgr
if args.upstream_port: if args.upload_port:
side_b = args.upstream_port side_b = args.upload_port
if args.radio: if args.radio:
radios = args.radio radios = args.radio
@@ -2106,7 +2106,7 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
controller_ap_modes = "local".split() controller_ap_modes = "local".split()
controller_data_encryptions = "disable".split() controller_data_encryptions = "disable".split()
controller_packet_types = "lf_udp lf_tcp".split() controller_packet_types = "lf_udp lf_tcp".split()
controller_directions = "upstream downstream".split() controller_directions = "upload download".split()
controller_packet_sizes = "88 512 1370 1518".split() controller_packet_sizes = "88 512 1370 1518".split()
controller_client_densities = "1 10 50 200".split() controller_client_densities = "1 10 50 200".split()
@@ -2137,8 +2137,8 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
controller_data_encryptions = "disable".split() controller_data_encryptions = "disable".split()
#controller_packet_types = "lf_udp lf_tcp".split() #controller_packet_types = "lf_udp lf_tcp".split()
controller_packet_types = "lf_udp".split() controller_packet_types = "lf_udp".split()
#controller_directions = "upstream downstream".split() #controller_directions = "upload download".split()
controller_directions = "upstream downstream".split() controller_directions = "upload download".split()
#controller_packet_sizes = "88 512 1370 1518".split() #controller_packet_sizes = "88 512 1370 1518".split()
controller_packet_sizes = "1518".split() controller_packet_sizes = "1518".split()
controller_client_densities = "10".split() controller_client_densities = "10".split()
@@ -2171,8 +2171,8 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
controller_data_encryptions = "disable".split() controller_data_encryptions = "disable".split()
#controller_packet_types = "lf_udp lf_tcp".split() #controller_packet_types = "lf_udp lf_tcp".split()
controller_packet_types = "lf_udp".split() controller_packet_types = "lf_udp".split()
#controller_directions = "upstream downstream".split() #controller_directions = "upload download".split()
controller_directions = "upstream downstream".split() controller_directions = "upload download".split()
#controller_packet_sizes = "88 512 1370 1518".split() #controller_packet_sizes = "88 512 1370 1518".split()
controller_packet_sizes = "1518".split() controller_packet_sizes = "1518".split()
controller_client_densities = "1".split() controller_client_densities = "1".split()
@@ -2517,11 +2517,11 @@ LANforge GUI what is displayed in the Column and how to access the value with cl
padding_number_=10000, radio=radio_name_) padding_number_=10000, radio=radio_name_)
station_lists.append(station_list) station_lists.append(station_list)
index += 1 index += 1
# Run Traffic Upstream (STA to AP) # Run Traffic upload (STA to AP)
if(controller_direction == "upstream"): if(controller_direction == "upload"):
side_a_tx_min_bps = controller_side_a_tx_min_bps side_a_tx_min_bps = controller_side_a_tx_min_bps
side_b_tx_min_bps = 0 side_b_tx_min_bps = 0
# Run Traffic Downstream (AP to STA) # Run Traffic download (AP to STA)
else: else:
side_a_tx_min_bps = 0 side_a_tx_min_bps = 0
side_b_tx_min_bps = controller_side_b_tx_min_bps side_b_tx_min_bps = controller_side_b_tx_min_bps