mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-10-28 17:32:35 +00:00
72712ff548
These scripts will now be publicly available in a git repo for easier shared development and change tracking.
1122 lines
30 KiB
Perl
Executable File
1122 lines
30 KiB
Perl
Executable File
#!/usr/bin/perl
|
|
|
|
# This program is used to stress test the LANforge system, and may be used as
|
|
# an example for others who wish to automate LANforge tests.
|
|
|
|
# This script sets up VoIP connections.
|
|
# It then continously starts and stops the connections.
|
|
|
|
# Un-buffer output
|
|
$| = 1;
|
|
|
|
use strict;
|
|
use Switch;
|
|
|
|
use Net::Telnet ();
|
|
use LANforge::Port;
|
|
use LANforge::Utils;
|
|
|
|
my $script_speed = 25; # Increase to issue commands faster
|
|
|
|
my $lfmgr_host = undef;
|
|
my $lfmgr_port = 4001;
|
|
|
|
my $shelf = 1;
|
|
|
|
my $INIT = 1; # If true, removes all previous tests!!!
|
|
|
|
# This sets up connections between 2 LANforge machines with minor EIDs of 4 and 15
|
|
#my $lf1 = 4; my $lf2 = 15; my @lf1_ports = (0); my @lf2_ports = (0);
|
|
|
|
# This sets up connections between 2 ports of a single machine;
|
|
# $lf1 and $lf2 are the minor number of the EIDs of the resource/card.
|
|
#my $lf1 = 4; my $lf2 = 4; my @lf1_ports = ("eth1"); my @lf2_ports = ("eth2");
|
|
#my $lf1 = 1; my $lf2 = 2; my @lf1_ports = ("ad0"); my @lf2_ports = ("ad0");
|
|
my $lf1 = 1; my $lf2 = 1; my @lf1_ports = ("eth1"); my @lf2_ports = ("eth2");
|
|
|
|
my $ignore_phys_ports = 0; # If 1, just muck with mac-vlans instead.
|
|
my $mac1 = 0x00; # Starting MAC address 00:m5:m4:m3:m2:m1 where:
|
|
my $mac2 = 0x00; # m5 is shelf EID, m4 is card EID, m3 is $mac3,
|
|
my $mac3 = 0x00; # m2 is $mac2 and m1 is $mac1.
|
|
my $ip_base = "10.0";
|
|
my $ip_c = 1;
|
|
my $ip_lsb = 10;
|
|
my $msk = "255.0.0.0";
|
|
my $default_gw = "0.0.0.0";
|
|
|
|
my $start_mvlan = 0; # Starting MACVLAN index for VoIP endpoints.
|
|
my $num_cxs = 70; # Overrides $num_mvlans.
|
|
my $num_mvlans = 0; # Only used if $num_cxs is zero: The number of MACVLANs per interface.
|
|
# Representing the total number of VoIP CXs. VoIP CXs are created
|
|
# across the two physical interfaces + the MACVLANs per interface.
|
|
|
|
|
|
my $codec = "G711U"; # Other options: G711U, g729a, SPEEX, g726-16, g726-24, g726-32, g726-40
|
|
my $jB_size = 1; # Set jitter buffer size in 20ms packets. Default value is 8 packets, 160ms.
|
|
my $tos = 0xBE; # Set ToS/QoS for VoIP can be decimal or 0xNN for hexadecimal but values will display in decimal in the GUI.
|
|
|
|
|
|
my $mn_icg = 3; # minimum intercall gap
|
|
my $mx_icg = 3; # maximum intercall gap
|
|
my $min_call_duration = 0; # set to zero for 'file'
|
|
my $max_call_duration = 0; # Set to zero for 'file'
|
|
|
|
my $start_dly = 3; # seconds to delay call start
|
|
my $start_dly_inc = 0; # seconds to increase delay by for each test
|
|
|
|
my $no_send_rtp = 0; # Set to zero to send RTP traffic, 1 to suppress RTP
|
|
my $use_VAD = 0; # Set to zero to not use VAD, 1 to use VAD
|
|
my $vad_timer = 500; # how much silence (ms) before we start VAD (Silence Suppression)
|
|
my $vad_fs = 3000; # how often (ms) to force an rtp pkt send even if we are in VAD
|
|
my $use_PESQ = 0; # Set to 1 for PESQ, zero for not PESQ
|
|
my $pesq_server = "127.0.0.1";
|
|
my $pesq_server_port = 3998;
|
|
my $vproto = "SIP"; # set $vproto = "H323"; for H.323
|
|
my $bsip_port_a = "5066"; # Base SIP port for endpoint-A
|
|
my $bsip_port_b = "5067"; # Base SIP port for endpoint-B
|
|
my $i_sip_port_a = 0; # If zero, do not increment, otherwise increment by assigned value.
|
|
my $i_sip_port_b = 0; # If zero, do not increment, otherwise increment by assigned value.
|
|
my $brtp_port = "AUTO"; # Base RTP port
|
|
my $i_rtp_port = 0; # If zero, do not increment, otherwise increment by assgined value
|
|
|
|
|
|
# If zero, will have one of EACH of the cx types on each port.
|
|
#my $one_cx_per_port = 1;
|
|
#my $one_cx_per_port = 0;
|
|
|
|
#my @cx_types = ("", "lf_udp", "lf_tcp", "custom_udp", "custom_tcp", "l4");
|
|
#my @min_pkt_szs = (64, 1, 1, 1, 1, 0);
|
|
#my @max_pkt_szs = (1514, 12000, 13000, 2048, 2048, 0);
|
|
|
|
# Layer-4 only
|
|
#my @cx_types = ("l4", "l4");
|
|
#my @min_pkt_szs = (0, 0);
|
|
#my @max_pkt_szs = (0, 0);
|
|
|
|
# VOIP only
|
|
#my @cx_types = ("voip", "voip", "voip", "voip");
|
|
#my @min_pkt_szs = (0, 0, 0, 0);
|
|
#my @max_pkt_szs = (0, 0, 0, 0);
|
|
#my @cx_types = ("voip");
|
|
#my @min_pkt_szs = (0);
|
|
#my @max_pkt_szs = (0);
|
|
|
|
my $peer_to_peer_voip = 1; # Don't register with SIP proxy, but just call peer to peer.
|
|
|
|
my @src_sound_files = ("media/female_voice_8khz.wav");
|
|
|
|
# URL will be acted on from machine $lf1
|
|
#my $l4_url = "http://172.1.5.75";
|
|
#my $l4_url = "http://172.1.2.3"; # not used in lf_voip.pl script but makes it work
|
|
|
|
#my $min_rate = 64000; # not used in lf_voip.pl script but makes it work
|
|
#my $max_rate = 512000; # not used in lf_voip.pl script but makes it work
|
|
|
|
my $test_mgr = "voip_tm";
|
|
|
|
my $STARTSTOP_LOOP = 0; # set $STARTSTOP_LOOP = 1; to start and stop ALL endpoints
|
|
# after script finishes populating the database.
|
|
my $loop_max = 100;
|
|
my $start_stop_iterations = 100;
|
|
my $run_for_time = 1200; # Run for XX seconds..then will be stopped again
|
|
my $stop_for_time = 5; # Run for XX seconds..then will be stopped again
|
|
my $report_timer = 5000; # 8 seconds
|
|
|
|
|
|
########################################################################
|
|
# Nothing to configure below here, most likely.
|
|
########################################################################
|
|
my $script_name = $0;
|
|
|
|
# Parse cmd-line args
|
|
my $i;
|
|
for ($i = 0; $i<@ARGV; $i++) {
|
|
my $var = $ARGV[$i];
|
|
if ($var =~ m/(\S+)=(.*)/) {
|
|
my $arg = $1;
|
|
my $val = $2;
|
|
handleCmdLineArg($arg, $val);
|
|
}
|
|
else {
|
|
handleCmdLineArg($var);
|
|
}
|
|
}
|
|
|
|
if ($lfmgr_host == undef) {
|
|
print "\nYou must define a LANforge Manager!!!\n\n"
|
|
. "For example:\n"
|
|
. "./$script_name mgr=locahost\n"
|
|
. "OR\n"
|
|
. "./$script_name mgr=192.168.1.101\n\n";
|
|
printHelp();
|
|
exit (1);
|
|
}
|
|
|
|
my @num = (); #make sorting by name easier :P
|
|
my $num_len = 0;
|
|
my $total = 0;
|
|
|
|
if ($num_mvlans == 0 && $num_cxs == 0) {
|
|
printHelp();
|
|
print "\nYou must specify a non-zero value for: num_cxs: $num_cxs OR num_mvl: $num_mvlans\n\n";
|
|
exit (1);
|
|
}
|
|
|
|
if ($num_cxs != 0) {
|
|
$total = $num_cxs*2;
|
|
$num_len = length ($total);
|
|
$num_mvlans = $num_cxs-1;
|
|
}
|
|
else {
|
|
$total = (($num_mvlans+1)*2);
|
|
$num_len = length ($total);
|
|
}
|
|
|
|
my $i = 0;
|
|
switch ($num_len) {
|
|
case 1 {
|
|
for ($i=0;$i<$total;$i++) {
|
|
$num[$i] = sprintf("%01d", $i);
|
|
}
|
|
}
|
|
case 2 {
|
|
for ($i=0;$i<$total;$i++) {
|
|
$num[$i] = sprintf("%02d", $i);
|
|
}
|
|
}
|
|
case 3 {
|
|
for ($i=0;$i<$total;$i++) {
|
|
$num[$i] = sprintf("%03d", $i);
|
|
}
|
|
}
|
|
case 4 {
|
|
for ($i=0;$i<$total;$i++) {
|
|
$num[$i] = sprintf("%04d", $i);
|
|
}
|
|
}
|
|
else { print '***** Error Invalid Number of MAC VLANS i.e. >10,000 !!!!'; }
|
|
}
|
|
|
|
|
|
print
|
|
. "init: $INIT\n"
|
|
. "\nmanager: $lfmgr_host\n"
|
|
. "\nlf1: $lf1\nlf2: $lf2\n"
|
|
. "\nlf1_ports: " . join(" ", @lf1_ports)
|
|
. "\nlf2_ports: " . join(" ", @lf2_ports) . "\n"
|
|
. "\nstart_macvlans: $start_mvlan"
|
|
. "\nnum_mvlans: $num_mvlans\n\n";
|
|
|
|
|
|
#my $junk=0;
|
|
#for ($junk=0;$junk<$total;$junk++) {
|
|
# printf "$num[$junk],";
|
|
#}
|
|
#printf "\n";
|
|
#exit(0);
|
|
|
|
my @endpoint_names = (); #will be added to as they are created
|
|
my @cx_names = ();
|
|
|
|
# Open connection to the LANforge server.
|
|
|
|
my $t = new Net::Telnet(Timeout => 45,
|
|
Prompt => '/default\@btbits\>\>/');
|
|
|
|
|
|
$t->open(Host => $lfmgr_host,
|
|
Port => $lfmgr_port,
|
|
Timeout => 45);
|
|
|
|
$t->waitfor("/btbits\>\>/");
|
|
|
|
# Configure our utils.
|
|
my $utils = new LANforge::Utils();
|
|
$utils->telnet($t); # Set our telnet object.
|
|
$utils->cli_send_silent(0); # Do show input to CLI
|
|
$utils->cli_rcv_silent(0); # Repress output from CLI ??
|
|
|
|
|
|
my $dt = "";
|
|
|
|
my $loop = 0;
|
|
for ($loop = 0; $loop<$loop_max; $loop++) {
|
|
$dt = `date`;
|
|
chomp($dt);
|
|
print "\n\n***** Starting loop: $loop at: $dt *****\n\n";
|
|
|
|
if ($INIT) {
|
|
initToDefaults();
|
|
}
|
|
#exit(0);
|
|
|
|
# Now, add back the test manager we will be using
|
|
doCmd("add_tm $test_mgr");
|
|
doCmd("tm_register $test_mgr default"); #Add default user
|
|
doCmd("tm_register $test_mgr default_gui"); #Add default GUI user
|
|
|
|
if ($num_mvlans != 0) {
|
|
addMacVlans();
|
|
# Add some IP addresses to the ports
|
|
initIpAddresses();
|
|
}
|
|
|
|
# Add our endpoints
|
|
addCrossConnects();
|
|
|
|
if ($STARTSTOP_LOOP) {
|
|
my $rl = 0;
|
|
for ($rl = 0; $rl<$start_stop_iterations; $rl++) {
|
|
if (($rl % 2) == 0) {
|
|
doCmd("set_cx_state $test_mgr all RUNNING");
|
|
}
|
|
else {
|
|
# Do one at a time
|
|
my $q = 0;
|
|
for ($q = 0; $q<@cx_names; $q++) {
|
|
my $cmd = "set_cx_state $test_mgr " . $cx_names[$q] . " RUNNING";
|
|
doCmd($cmd);
|
|
}
|
|
}
|
|
|
|
print "Done starting endpoints...sleeping $run_for_time seconds.\n";
|
|
sleep($run_for_time);
|
|
|
|
# Now, stop them...
|
|
|
|
if (($rl % 2) == 0) {
|
|
doCmd("set_cx_state $test_mgr all STOPPED");
|
|
}
|
|
else {
|
|
# Do one at a time
|
|
my $q = 0;
|
|
for ($q = 0; $q<@cx_names; $q++) {
|
|
my $cmd = "set_cx_state $test_mgr " . $cx_names[$q] . " STOPPED";
|
|
doCmd($cmd);
|
|
}
|
|
}
|
|
sleep($stop_for_time);
|
|
}# For some amount of start_stop iterations...
|
|
}# STARTSTOP_LOOP
|
|
else {
|
|
$dt = `date`;
|
|
chomp($dt);
|
|
print "Done at: $dt\n\n";
|
|
exit(0);
|
|
}# STARTSTOP_LOOP
|
|
}# for some amount of loop iterations
|
|
|
|
$dt = `date`;
|
|
chomp($dt);
|
|
print "Done at: $dt\n\n";
|
|
exit(0);
|
|
|
|
|
|
sub initToDefaults {
|
|
# Clean up database if stuff exists
|
|
|
|
doCmd("rm_cx $test_mgr all");
|
|
doCmd("rm_endp YES_ALL");
|
|
doCmd("rm_test_mgr $test_mgr");
|
|
|
|
initPortsToDefault();
|
|
}#initToDefaults
|
|
|
|
my $lsb1 = sprintf("%d", $mac1);
|
|
my $lsb2 = sprintf("%d", $mac2);
|
|
my $lsb3 = sprintf("%d", $mac3);
|
|
|
|
# Return a unique MAC address using last 3 octets
|
|
sub getNextMac {
|
|
$lsb1++;
|
|
if ($lsb1 > 255) {
|
|
$lsb2++;
|
|
$lsb1 = 0;
|
|
if ($lsb2 > 255) {
|
|
$lsb3++;
|
|
$lsb2 = 0;
|
|
if ($lsb3 > 255) {
|
|
print "*** WARNING, MAC address rolling over XX:YY:ZZ:ff:ff:ff ***\n";
|
|
$lsb3 = 0;
|
|
}
|
|
}
|
|
}
|
|
$mac1 = sprintf("%02x", $lsb1);
|
|
$mac2 = sprintf("%02x", $lsb2);
|
|
$mac3 = sprintf("%02x", $lsb3);
|
|
return "$mac3:$mac2:$mac1";
|
|
} # getNextMac
|
|
|
|
sub addMacVlans {
|
|
my $i;
|
|
my $q;
|
|
my $v;
|
|
my $throttle = $script_speed;
|
|
my $since_throttle = 0;
|
|
for ($q = 0; $q<@lf1_ports; $q++) {
|
|
my $pnum1 = $lf1_ports[$q];
|
|
my $pnum2 = $lf2_ports[$q];
|
|
for ($i = $start_mvlan; $i<($num_mvlans + $start_mvlan); $i++) {
|
|
|
|
my $shlf = sprintf("%02x", $shelf);
|
|
my $card = sprintf("%02x", $lf1);
|
|
my $mac_index = getNextMac();
|
|
my $mac_addr = "00:$shlf:$card:$mac_index";
|
|
doCmd("add_mvlan $shelf $lf1 $pnum1 $mac_addr $i");
|
|
|
|
if ($lf2 ne "") {
|
|
$card = sprintf("%02x", $lf2);
|
|
$mac_index = getNextMac();
|
|
$mac_addr = "00:$shlf:$card:$mac_index";
|
|
doCmd("add_mvlan $shelf $lf2 $pnum2 $mac_addr $i");
|
|
}
|
|
|
|
# Throttle ourself so we don't over-run the poor LANforge system.
|
|
if ($since_throttle++ > $throttle) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf1, $pnum1);
|
|
if ($lf2 ne "") {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf2, $pnum2);
|
|
}
|
|
$since_throttle = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
doCmd("probe_ports");
|
|
|
|
# Wait until we discover all the ports...
|
|
|
|
for ($q = 0; $q<@lf1_ports; $q++) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf1, $lf1_ports[$q]);
|
|
my $pname = $p1->{dev};
|
|
|
|
my $p2 = new LANforge::Port();
|
|
my $pname2;
|
|
if ($lf2 ne "") {
|
|
$utils->updatePort($p2, $shelf, $lf2, $lf2_ports[$q]);
|
|
$pname2 = $p2->{dev};
|
|
}
|
|
|
|
for ($i = 0; $i<$num_mvlans; $i++) {
|
|
while (1) {
|
|
$utils->updatePort($p1, $shelf, $lf1, "$pname\#$i");
|
|
if ($lf2 ne "") {
|
|
$utils->updatePort($p2, $shelf, $lf2, "$pname2\#$i");
|
|
}
|
|
if ($p1->isPhantom() || (($lf2 ne "") && $p2->isPhantom())) {
|
|
sleep(1);
|
|
}
|
|
else {
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}#addMacVlans
|
|
|
|
# Wait untill the system can update a port..
|
|
sub throttleCard {
|
|
my $s = shift;
|
|
my $c = shift;
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $s, $c, 0);
|
|
}#throttle
|
|
|
|
sub initPortsToDefault {
|
|
clearMacVlanPorts($shelf, $lf1);
|
|
if ($lf2 ne "") {
|
|
clearMacVlanPorts($shelf, $lf2);
|
|
}
|
|
|
|
throttleCard($shelf, $lf1);
|
|
|
|
if ($lf2 ne "") {
|
|
throttleCard($shelf, $lf2);
|
|
}
|
|
|
|
# Set all ports we are messing with to known state.
|
|
if (!$ignore_phys_ports) {
|
|
my $i = 0;
|
|
for ($i = 0; $i<@lf1_ports; $i++) {
|
|
my $tmp = $lf1_ports[$i];
|
|
my $tmp2 = $lf2_ports[$i];
|
|
doCmd("set_port $shelf $lf1 $tmp 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA");
|
|
if ($lf2 ne "") {
|
|
doCmd("set_port $shelf $lf2 $tmp2 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
sub clearMacVlanPorts {
|
|
my $s = shift;
|
|
my $c = shift;
|
|
|
|
my $i;
|
|
my $found_one = 1;
|
|
my @ports = ();
|
|
while ($found_one) {
|
|
$found_one = 0;
|
|
doCmd("probe_ports");
|
|
# Clear out any existing MAC-VLAN ports.
|
|
$utils->error("");
|
|
@ports = $utils->getPortListing($s, $c);
|
|
my $mx = @ports;
|
|
print "Found $mx ports for card: $shelf.$lf1\n";
|
|
|
|
if (($mx == 0) || ($utils->error() =~ /Timed out/g)) {
|
|
# System is too backlogged to answer, wait a bit
|
|
print " Will try listing ports again in a few seconds...system is backlogged now!\n";
|
|
sleep(5);
|
|
$found_one = 1;
|
|
next;
|
|
}
|
|
|
|
my $throttle = 0;
|
|
for ($i = 0; $i<$mx; $i++) {
|
|
if ($ports[$i]->isMacVlan()) {
|
|
doCmd($ports[$i]->getDeleteCmd());
|
|
} #fi isMacVlan
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
sub initIpAddresses {
|
|
# Set all ports we are messing with to known state.
|
|
my $i = 0;
|
|
for ($i = 0; $i<@lf1_ports; $i++) {
|
|
if ($ip_lsb > 250) {
|
|
$ip_c++;
|
|
$ip_lsb = 2;
|
|
}
|
|
|
|
my $tmp = $lf1_ports[$i];
|
|
my $tmp2 = $lf2_ports[$i];
|
|
my $cmd = "";
|
|
if (!$ignore_phys_ports) {
|
|
$cmd = "set_port $shelf $lf1 $tmp $ip_base.$ip_c.$ip_lsb $msk " .
|
|
"$default_gw NA NA NA";
|
|
doCmd($cmd);
|
|
$ip_lsb++;
|
|
|
|
if ($lf2 ne "") {
|
|
$cmd = "set_port $shelf $lf2 $tmp2 $ip_base.$ip_c.$ip_lsb $msk " .
|
|
"$default_gw NA NA NA";
|
|
doCmd($cmd);
|
|
$ip_lsb++;
|
|
}
|
|
}
|
|
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf1, $tmp);
|
|
my $pname = $p1->{dev};
|
|
|
|
my $q;
|
|
my $throttle = $script_speed;
|
|
my $since_throttle = 0;
|
|
for ($q = 0; $q<$num_mvlans; $q++) {
|
|
$cmd = "set_port $shelf $lf1 $pname\#$q $ip_base.$ip_c.$ip_lsb $msk "
|
|
. "$default_gw NA NA NA NA 400";
|
|
doCmd($cmd);
|
|
$ip_lsb++;
|
|
|
|
if ($ip_lsb > 250) {
|
|
$ip_c++;
|
|
$ip_lsb = 2;
|
|
}
|
|
|
|
if ($since_throttle++ > $throttle) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf1, "$pname\#$q");
|
|
$since_throttle = 0;
|
|
}
|
|
}
|
|
|
|
$ip_lsb++;
|
|
|
|
if ($lf2 ne "") {
|
|
$p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf2, $tmp2);
|
|
$pname = $p1->{dev};
|
|
|
|
for ($q = 0; $q<$num_mvlans; $q++) {
|
|
$cmd = "set_port $shelf $lf2 $pname\#$q $ip_base.$ip_c.$ip_lsb $msk "
|
|
. "$default_gw NA NA NA NA 400";
|
|
doCmd($cmd);
|
|
$ip_lsb++;
|
|
|
|
if ($ip_lsb > 250) {
|
|
$ip_c++;
|
|
$ip_lsb = 2;
|
|
}
|
|
|
|
if ($since_throttle++ > $throttle) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf2, "$pname\#$q");
|
|
$since_throttle = 0;
|
|
}
|
|
}
|
|
}# If we have an LF-2 defined.
|
|
}
|
|
}
|
|
|
|
sub addCrossConnects {
|
|
my $ep = 0;
|
|
my $cx = 0;
|
|
my $i = 0;
|
|
|
|
my $voip_phone = 3000; # Start here and count on up as needed.
|
|
my $rtp_port = 10000; # Starting RTP port.
|
|
my $sound_file_idx = 0;
|
|
my $sip_port_a = $bsip_port_a;
|
|
my $sip_port_b = $bsip_port_b;
|
|
|
|
|
|
my @all_ports1 = @lf1_ports;
|
|
my $j;
|
|
my $pname;
|
|
for ($j = 0; $j<@lf1_ports; $j++) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf1, $lf1_ports[$j]);
|
|
$pname = $p1->{dev};
|
|
|
|
my $q;
|
|
my $q_end = 0;
|
|
|
|
if ($num_mvlans == 0) {
|
|
$q_end = $num_cxs;
|
|
}
|
|
else {
|
|
$q_end = $num_mvlans;
|
|
}
|
|
|
|
for ($q = 0; $q<$q_end; $q++) {
|
|
@all_ports1 = (@all_ports1, "$pname\#$q");
|
|
}
|
|
}
|
|
|
|
my @all_ports2 = @lf2_ports;
|
|
if ($lf2 ne "") {
|
|
for ($j = 0; $j<@lf2_ports; $j++) {
|
|
my $p1 = new LANforge::Port();
|
|
$utils->updatePort($p1, $shelf, $lf2, $lf2_ports[$j]);
|
|
$pname = $p1->{dev};
|
|
|
|
my $q;
|
|
my $q_end = 0;
|
|
|
|
if ($num_mvlans == 0) {
|
|
$q_end = $num_cxs;
|
|
}
|
|
else {
|
|
$q_end = $num_mvlans;
|
|
}
|
|
|
|
for ($q = 0; $q<$q_end; $q++) {
|
|
@all_ports2 = (@all_ports2, "$pname\#$q");
|
|
}
|
|
}
|
|
}
|
|
|
|
print "About to start endpoints, all_ports1:\n" . join(" ", @all_ports1) .
|
|
"\nall_ports2: " . join(" ", @all_ports2) . "\n\n";
|
|
|
|
# if ($one_cx_per_port) {
|
|
# my $j = 0;
|
|
# my $cxcnt = 0;
|
|
# for ($j ; $j<@all_ports1; $j++) {
|
|
# my $i = $cxcnt % @cx_types;
|
|
# $cxcnt++;
|
|
#
|
|
# my $cxt = $cx_types[$i];
|
|
# if ($cxt eq "l4") {
|
|
# # Create layer-4 endpoint
|
|
#
|
|
# my $ep1 = "l4e-${ep}-TX";
|
|
# $ep++;
|
|
# my $ep2 = "D_l4e-${ep}-TX";
|
|
# $ep++;
|
|
#
|
|
# @endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
#
|
|
# # Add the dummy endpoint
|
|
# my $cmd = "add_l4_endp $ep2 $shelf $lf1 " . $all_ports1[$j] . " l4_generic 0 0 0 ' ' ' '";
|
|
# doCmd($cmd);
|
|
# $cmd = "set_endp_flag $ep2 unmanaged 1";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " l4_generic 0 10000 100 '" .
|
|
# "dl $l4_url /tmp/$ep1' ' '";
|
|
# doCmd($cmd);
|
|
#
|
|
# # Now, add the cross-connects
|
|
# my $cx_name = "l4-cx-${cx}";
|
|
# $cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
# doCmd($cmd);
|
|
# doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
#
|
|
# $cx++;
|
|
#
|
|
# @cx_names = (@cx_names, $cx_name);
|
|
# }
|
|
# elsif ($cxt eq "voip") {
|
|
# # Create VOIP endpoint
|
|
#
|
|
# my $ep1 = "rtpe-${num[$ep]}-TX";
|
|
# $ep++;
|
|
# my $ep2 = "rtpe-${num[$ep]}-RX";
|
|
# $ep++;
|
|
#
|
|
# @endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
#
|
|
# my $cmd = "add_voip_endp $ep2 $shelf $lf2 " . $all_ports2[$j] .
|
|
# " $voip_phone $rtp_port AUTO " .
|
|
# $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
# " " . $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
# ".$ep2 $vad_timer $vad_fs";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "set_voip_info $ep2 NA $mn_icg $mx_icg NA $codec $vproto NA NA $min_call_duration $max_call_duration /dev/null 20000 $sip_port_b $pesq_server $pesq_server_port NA $jB_size";
|
|
# doCmd($cmd);
|
|
#
|
|
# if ($i_sip_port_b != 0) {
|
|
# $sip_port_b = $sip_port_b + $i_sip_port_b;
|
|
# }
|
|
#
|
|
# $cmd = "set_endp_flag $ep2 SavePCM 0";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "set_endp_tos $ep2 ${tos} 0";
|
|
# doCmd($cmd);
|
|
#
|
|
# if ($peer_to_peer_voip) {
|
|
# $cmd = "set_endp_flag $ep2 DoNotRegister 1";
|
|
# doCmd($cmd);
|
|
# $cmd = "set_endp_flag $ep2 BindSIP 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
# if ($no_send_rtp) {
|
|
# $cmd = "set_endp_flag $ep2 nosendrtp 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
#
|
|
# if ($use_VAD) {
|
|
# $cmd = "set_endp_flag $ep2 VAD 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
#
|
|
# if ($use_PESQ) {
|
|
# $cmd = "set_endp_flag $ep2 pesq 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
#
|
|
# $voip_phone++;
|
|
# $rtp_port += 2;
|
|
# $sound_file_idx++;
|
|
#
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "add_voip_endp $ep1 $shelf $lf1 " . $all_ports1[$j] .
|
|
# " $voip_phone $rtp_port AUTO " .
|
|
# $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
# " " . $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
# ".$ep1 $vad_timer $vad_fs";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "set_voip_info $ep1 NA $mn_icg $mx_icg NA $codec $vproto NA NA $min_call_duration $max_call_duration /dev/null 20000 $sip_port_a $pesq_server $pesq_server_port NA $jB_size";
|
|
# doCmd($cmd);
|
|
#
|
|
# if ($i_sip_port_a != 0) {
|
|
# $sip_port_a = $sip_port_a + $i_sip_port_a;
|
|
# }
|
|
#
|
|
# $cmd = "set_endp_flag $ep1 SavePCM 0";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "set_endp_tos $ep1 ${tos} 0";
|
|
# doCmd($cmd);
|
|
#
|
|
# if ($peer_to_peer_voip) {
|
|
# $cmd = "set_endp_flag $ep1 DoNotRegister 1";
|
|
# doCmd($cmd);
|
|
# $cmd = "set_endp_flag $ep1 BindSIP 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
# if ($no_send_rtp) {
|
|
# $cmd = "set_endp_flag $ep1 nosendrtp 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
# if ($use_VAD) {
|
|
# $cmd = "set_endp_flag $ep1 VAD 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
#
|
|
# if ($use_PESQ) {
|
|
# $cmd = "set_endp_flag $ep1 pesq 1";
|
|
# doCmd($cmd);
|
|
# }
|
|
#
|
|
# $voip_phone++;
|
|
# $rtp_port += 2;
|
|
# $sound_file_idx++;
|
|
#
|
|
# # Now, add the cross-connects
|
|
# my $cx_name = "rtp-cx-${num[$cx]}";
|
|
# $cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
# doCmd($cmd);
|
|
# doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
#
|
|
# $cx++;
|
|
#
|
|
# @cx_names = (@cx_names, $cx_name);
|
|
# }
|
|
# else {
|
|
# my $burst = "NO";
|
|
# if ($min_rate != $max_rate) {
|
|
# $burst = "YES";
|
|
# }
|
|
# my $szrnd = "NO";
|
|
# if ($min_pkt_szs[$i] != $max_pkt_szs[$i]) {
|
|
# $szrnd = "YES";
|
|
# }
|
|
#
|
|
# my $pattern = "increasing";
|
|
# if ($cx_types[$i] =~ /custom/) {
|
|
# $pattern = "custom";
|
|
# }
|
|
#
|
|
# my $ep1 = "l3e-${ep}-TX";
|
|
# $ep++;
|
|
# my $ep2 = "l3e-${ep}-RX";
|
|
# $ep++;
|
|
#
|
|
# @endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
#
|
|
# my $cmd = "add_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " " . @cx_types[$i] .
|
|
# " -1 $burst $min_rate $max_rate $szrnd " . $min_pkt_szs[$i] . " " . $max_pkt_szs[$i] .
|
|
# " $pattern NO";
|
|
# doCmd($cmd);
|
|
#
|
|
#
|
|
# if ($lf2 == "") {
|
|
# die("Must lave lf2 defined if using non-l4 endpoints.");
|
|
# }
|
|
#
|
|
# $cmd = "add_endp $ep2 $shelf $lf2 " . $all_ports2[$j] . " " . @cx_types[$i] .
|
|
# " -1 $burst $min_rate $max_rate $szrnd " . $min_pkt_szs[$i] . " " .
|
|
# $max_pkt_szs[$i] . " $pattern NO";
|
|
# doCmd($cmd);
|
|
#
|
|
# # Now, add the cross-connects
|
|
# my $cx_name = "l3-cx-${cx}";
|
|
# $cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
# doCmd($cmd);
|
|
# doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
#
|
|
# $cx++;
|
|
#
|
|
# @cx_names = (@cx_names, $cx_name);
|
|
# }
|
|
# }#for all ports
|
|
# }#one_cx_per_port
|
|
# else {
|
|
my $j = 0;
|
|
for ($j ; $j<@all_ports1; $j++) {
|
|
# for ($i = 0; $i<@cx_types; $i++) {
|
|
# my $cxt = $cx_types[$i];
|
|
#
|
|
# if ($cxt eq "l4") {
|
|
# # Create layer-4 endpoint
|
|
#
|
|
# my $ep1 = "l4e-${ep}-TX";
|
|
# $ep++;
|
|
# my $ep2 = "D_l4e-${ep}-TX";
|
|
# $ep++;
|
|
#
|
|
# @endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
#
|
|
# # Add the dummy endpoint
|
|
# my $cmd = "add_l4_endp $ep2 $shelf $lf1 " . $all_ports1[$j] . " l4_generic 0 0 0 ' ' ' '";
|
|
# doCmd($cmd);
|
|
# $cmd = "set_endp_flag $ep2 unmanaged 1";
|
|
# doCmd($cmd);
|
|
#
|
|
# $cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " l4_generic 0 10000 100 '" .
|
|
# "dl $l4_url /tmp/$ep1' ' '";
|
|
# doCmd($cmd);
|
|
#
|
|
# # Now, add the cross-connects
|
|
# my $cx_name = "l4-cx-${cx}";
|
|
# $cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
# doCmd($cmd);
|
|
# doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
#
|
|
# $cx++;
|
|
#
|
|
# @cx_names = (@cx_names, $cx_name);
|
|
# } # cx type l4
|
|
# elsif ($cxt eq "voip") {
|
|
# Create VOIP endpoint
|
|
|
|
my $ep1 = "RTPE-${num[$ep]}-TX";
|
|
$ep++;
|
|
my $ep2 = "RTPE-${num[$ep]}-RX";
|
|
$ep++;
|
|
|
|
@endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
|
|
my $cmd = "add_voip_endp $ep2 $shelf $lf2 " . $all_ports2[$j] .
|
|
" $voip_phone $rtp_port AUTO " .
|
|
$src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
" " . $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
".$ep2 $vad_timer $vad_fs";
|
|
doCmd($cmd);
|
|
$voip_phone++;
|
|
$rtp_port += 2;
|
|
$sound_file_idx++;
|
|
|
|
$cmd = "set_voip_info $ep2 $start_dly $mn_icg $mx_icg NA $codec $vproto NA NA $min_call_duration $max_call_duration /dev/null 20000 $sip_port_b $pesq_server $pesq_server_port NA $jB_size";
|
|
doCmd($cmd);
|
|
|
|
if ($i_sip_port_b != 0) {
|
|
$sip_port_b = $sip_port_b + $i_sip_port_b;
|
|
}
|
|
|
|
$cmd = "set_endp_flag $ep2 SavePCM 0";
|
|
doCmd($cmd);
|
|
|
|
$cmd = "set_endp_tos $ep2 ${tos} 0";
|
|
doCmd($cmd);
|
|
|
|
if ($peer_to_peer_voip) {
|
|
$cmd = "set_endp_flag $ep2 DoNotRegister 1";
|
|
doCmd($cmd);
|
|
$cmd = "set_endp_flag $ep2 BindSIP 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
if ($no_send_rtp) {
|
|
$cmd = "set_endp_flag $ep2 nosendrtp 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
if ($use_VAD) {
|
|
$cmd = "set_endp_flag $ep2 VAD 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
if ($use_PESQ) {
|
|
$cmd = "set_endp_flag $ep2 pesq 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
my $cmd = "add_voip_endp $ep1 $shelf $lf1 " . $all_ports1[$j] .
|
|
" $voip_phone $rtp_port AUTO " .
|
|
$src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
" " . $src_sound_files[$sound_file_idx % @src_sound_files] .
|
|
".$ep1";
|
|
doCmd($cmd);
|
|
|
|
$cmd = "set_voip_info $ep1 $start_dly $mn_icg $mx_icg NA $codec $vproto NA NA $min_call_duration $max_call_duration /dev/null 20000 $sip_port_a $pesq_server $pesq_server_port NA $jB_size";
|
|
doCmd($cmd);
|
|
|
|
$start_dly += $start_dly_inc;
|
|
|
|
if ($i_sip_port_a != 0) {
|
|
$sip_port_a = $sip_port_a + $i_sip_port_a;
|
|
}
|
|
|
|
$cmd = "set_endp_flag $ep1 SavePCM 0";
|
|
doCmd($cmd);
|
|
|
|
$cmd = "set_endp_tos $ep1 ${tos} 0";
|
|
doCmd($cmd);
|
|
|
|
if ($peer_to_peer_voip) {
|
|
$cmd = "set_endp_flag $ep1 DoNotRegister 1";
|
|
doCmd($cmd);
|
|
$cmd = "set_endp_flag $ep1 BindSIP 1";
|
|
doCmd($cmd);
|
|
}
|
|
if ($no_send_rtp) {
|
|
$cmd = "set_endp_flag $ep1 nosendrtp 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
if ($use_VAD) {
|
|
$cmd = "set_endp_flag $ep1 VAD 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
if ($use_PESQ) {
|
|
$cmd = "set_endp_flag $ep1 pesq 1";
|
|
doCmd($cmd);
|
|
}
|
|
|
|
$voip_phone++;
|
|
$rtp_port += 2;
|
|
$sound_file_idx++;
|
|
|
|
# Now, add the cross-connects
|
|
my $cx_name = "rtp-cx-${num[$cx]}";
|
|
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
doCmd($cmd);
|
|
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
|
|
$cx++;
|
|
|
|
@cx_names = (@cx_names, $cx_name);
|
|
# }
|
|
# else {
|
|
# my $burst = "NO";
|
|
# if ($min_rate != $max_rate) {
|
|
# $burst = "YES";
|
|
# }
|
|
# my $szrnd = "NO";
|
|
# if ($min_pkt_szs[$i] != $max_pkt_szs[$i]) {
|
|
# $szrnd = "YES";
|
|
# }
|
|
#
|
|
# my $pattern = "increasing";
|
|
# if ($cx_types[$i] =~ /custom/) {
|
|
# $pattern = "custom";
|
|
# }
|
|
#
|
|
# my $ep1 = "l3e-${ep}-TX";
|
|
# $ep++;
|
|
# my $ep2 = "l3e-${ep}-RX";
|
|
# $ep++;
|
|
#
|
|
# @endpoint_names = (@endpoint_names, $ep1, $ep2);
|
|
#
|
|
# my $cmd = "add_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " " . @cx_types[$i] .
|
|
# " -1 $burst $min_rate $max_rate $szrnd " . $min_pkt_szs[$i] . " " . $max_pkt_szs[$i] .
|
|
# " $pattern NO";
|
|
# doCmd($cmd);
|
|
#
|
|
# if ($lf2 == "") {
|
|
# die("Must lave lf2 defined if using non-l4 endpoints.");
|
|
# }
|
|
#
|
|
# $cmd = "add_endp $ep2 $shelf $lf2 " . $all_ports2[$j] . " " . @cx_types[$i] .
|
|
# " -1 $burst $min_rate $max_rate $szrnd " . $min_pkt_szs[$i] . " " .
|
|
# $max_pkt_szs[$i] . " $pattern NO";
|
|
# doCmd($cmd);
|
|
#
|
|
# # Now, add the cross-connects
|
|
# my $cx_name = "l3-cx-${cx}";
|
|
# $cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
|
|
# doCmd($cmd);
|
|
# doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
|
|
#
|
|
# $cx++;
|
|
#
|
|
# @cx_names = (@cx_names, $cx_name);
|
|
# }
|
|
# }#for cx types
|
|
}#for each port
|
|
# }# each cx per port
|
|
}#addCrossConnects
|
|
|
|
|
|
sub doCmd {
|
|
my $cmd = shift;
|
|
|
|
print ">>> $cmd\n";
|
|
|
|
$t->print($cmd);
|
|
|
|
my @rslt = $t->waitfor('/ \>\>RSLT:(.*)/');
|
|
print "**************\n @rslt ................\n\n";
|
|
#sleep(1);
|
|
}
|
|
|
|
|
|
sub printHelp {
|
|
print
|
|
"\n$script_name\n"
|
|
. "USAGE: mgr=[ip-of-mgr] init=[0|1] speed=25\n"
|
|
. " lf1=X lf2=Y\n"
|
|
. " lf1_ports=[\"1 2 3\"|\"eth2 eth3\"] lf2_ports=[\"4 5 6\"|\"eth4 eth5\"]\n"
|
|
. " start_mvl=X num_cxs=[N|0 num_mvl=Y]\n"
|
|
. " mac3=0xf0 mac2=0xbe mac1=0xef\n"
|
|
. " ip_base=192.168 ip_c=1 ip_lsb=2 ip_msk=255.255.0.0\n"
|
|
. "\n";
|
|
|
|
}
|
|
|
|
sub handleCmdLineArg {
|
|
my $arg = $_[0];
|
|
my $val = $_[1];
|
|
|
|
if ($arg eq "mgr") {
|
|
$lfmgr_host = $val;
|
|
}
|
|
elsif ($arg eq "init") {
|
|
$INIT = $val;
|
|
}
|
|
elsif ($arg eq "speed") {
|
|
$script_speed = $val;
|
|
}
|
|
elsif ($arg eq "lf1") {
|
|
$lf1 = $val;
|
|
}
|
|
elsif ($arg eq "lf2") {
|
|
$lf2 = $val;
|
|
if ($lf1 == $lf2) {
|
|
print "\nINVALID: First and second resource are the same !!!\n\n";
|
|
exit (1);
|
|
}
|
|
}
|
|
elsif ($arg eq "mac3") {
|
|
$mac3 = $val;
|
|
}
|
|
elsif ($arg eq "mac2") {
|
|
$mac2 = $val;
|
|
}
|
|
elsif ($arg eq "mac1") {
|
|
$mac1 = $val;
|
|
}
|
|
elsif ($arg eq "ip_base") {
|
|
$ip_base = $val;
|
|
}
|
|
elsif ($arg eq "ip_lsb") {
|
|
$ip_lsb = $val;
|
|
}
|
|
elsif ($arg eq "ip_c") {
|
|
$ip_c = $val;
|
|
}
|
|
elsif ($arg eq "ip_msk") {
|
|
$msk = $val;
|
|
}
|
|
elsif ($arg eq "lf1_ports") {
|
|
@lf1_ports = split(/ /, $val);
|
|
}
|
|
elsif ($arg eq "lf2_ports") {
|
|
if ($lf2 == "" || $lf1 == $lf2) {
|
|
print "\nINVALID: Either second resource is not defined\nor first and second resource are the same !!!\n\n";
|
|
exit (1);
|
|
}
|
|
else {
|
|
@lf2_ports = split(/ /, $val);
|
|
}
|
|
}
|
|
elsif ($arg eq "start_mvl") {
|
|
$start_mvlan = $val;
|
|
}
|
|
elsif ($arg eq "num_cxs") {
|
|
$num_cxs = $val;
|
|
}
|
|
elsif ($arg eq "num_mvl") {
|
|
$num_mvlans = $val;
|
|
}
|
|
else {
|
|
printHelp();
|
|
exit(1);
|
|
}
|
|
} # handleCmdLineArg
|