mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-10-31 02:38:03 +00:00
31 lines
2.5 KiB
Python
31 lines
2.5 KiB
Python
add_vap_flags = {
|
|
"enable_wpa" : 0x10, # Enable WPA
|
|
"hostapd_config" : 0x20, # Use Custom hostapd config file.
|
|
"enable_80211d" : 0x40, # Enable 802.11D to broadcast country-code & channels in VAPs
|
|
"short_preamble" : 0x80, # Allow short-preamble
|
|
"pri_sec_ch_enable" : 0x100, # Enable Primary/Secondary channel switch.
|
|
"wep_enable" : 0x200, # Enable WEP Encryption
|
|
"wpa2_enable" : 0x400, # Enable WPA2 Encryption
|
|
"disable_ht40" : 0x800, # Disable HT-40 (will use HT-20 if available).
|
|
"verbose" : 0x10000, # Verbose-Debug: Increase debug info in wpa-supplicant and hostapd logs.
|
|
"80211u_enable" : 0x20000, # Enable 802.11u (Interworking) feature.
|
|
"80211u_auto" : 0x40000, # Enable 802.11u (Interworking) Auto-internetworking feature. Always enabled currently.
|
|
"80211u_gw" : 0x80000, # AP Provides access to internet (802.11u Interworking)
|
|
"80211u_additional" : 0x100000, # AP requires additional step for access (802.11u Interworking)
|
|
"80211u_e911" : 0x200000, # AP claims emergency services reachable (802.11u Interworking)
|
|
"80211u_e911_unauth" : 0x400000, # AP provides Unauthenticated emergency services (802.11u Interworking)
|
|
"hs20_enable" : 0x800000, # Enable Hotspot 2.0 (HS20) feature. Requires WPA-2.
|
|
"disable_dgaf" : 0x1000000, # AP Disable DGAF (used by HotSpot 2.0).
|
|
"8021x_radius" : 0x2000000, # Use 802.1x (RADIUS for AP).
|
|
"80211r_pmska_cache" : 0x4000000, # Enable oportunistic PMSKA caching for WPA2 (Related to 802.11r).
|
|
"disable_ht80" : 0x8000000, # Disable HT80 (for AC chipset NICs only)
|
|
"80211h_enable" : 0x10000000, # Enable 802.11h (needed for running on DFS channels) Requires 802.11d.
|
|
"osen_enable" : 0x40000000, # Enable OSEN protocol (OSU Server-only Authentication)
|
|
"ht160_enable" : 0x100000000, # Enable HT160 mode.
|
|
"create_admin_down" : 0x1000000000, # Station should be created admin-down.
|
|
"use-wpa3" : 0x10000000000, # Enable WPA-3 (SAE Personal) mode.
|
|
"use-bss-load" : 0x20000000000, # Enable BSS Load IE in Beacons and Probe Responses (.11e).
|
|
"use-rrm-report" : 0x40000000000, # Enable Radio measurements IE in beacon and probe responses.
|
|
"use-bss-transition" : 0x80000000000, # Enable BSS transition.
|
|
}
|