scottk/wlan-lanforge-scripts
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-lanforge-scripts.git synced 2025-10-31 02:38:03 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
087c77080f83e8e4d53550df233504e2e0f08dc0
wlan-lanforge-scripts/py-scripts/regression_test.sh
Matthew Stidham 20be39a531 improve regression_test bycommenting test which freezes test 
Signed-off-by: Matthew Stidham <stidmatt@gmail.com>
2021-11-05 15:29:58 -07:00

570 lines
25 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
##########################
# Help
##########################
Help()
{
echo "This bash script aims to automate the test process of all Candela Technologies test_* scripts in the lanforge-scripts directory to detect software regressions. The script can be run 2 ways and may include (via user input) the \"start_num\" and \"stop_num\" variables to select which tests should be run."
echo "OPTION ONE: ./regression_test.sh : this command runs all the scripts in the array \"testCommands\""
echo "OPTION TWO: ./regression_test.sh 4 5 : this command runs py-script commands (in testCommands array) that include the py-script options beginning with 4 and 5 (inclusive) in case function ret_case_num."
echo "Optional Variables:"
echo "SSID is the name of the network you are testing against"
echo "PASSWD is the password of said network"
echo "SECURITY is the security protocol of the network"
echo "MGR is the IP address of the device which has LANforge installed, if different from the system you are using."
echo "A is used to call to test a specific command based on"
echo "F is used to pass in an RC file which can store the credentials for running regression multiple times on your system"
echo "H is used to test the help feature of each script, to make sure it renders properly."
echo "L is used to give the IP address of the LANforge device which is under test"
echo "Example command: ./regression_test.sh -s SSID -p PASSWD -w SECURITY -m MGR"
echo "If using the help flag, put the H flag at the end of the command after other flags."
}
while getopts ":h:s:S:p:w:m:A:r:F:B:U:D:L:H:" option; do
case "${option}" in
h) # display Help
Help
exit 1
;;
s)
SSID_USED=${OPTARG}
;;
S)
SHORT="yes"
;;
p)
PASSWD_USED=${OPTARG}
;;
w)
SECURITY=${OPTARG}
;;
m)
MGR=${OPTARG}
;;
A)
A=${OPTARG}
;;
r)
RADIO_USED=${OPTARG}
;;
F)
RC_FILE=${OPTARG}
;;
B)
BSSID=${OPTARG}
;;
U)
UPSTREAM=${OPTARG}
;;
D)
DUT5=${OPTARG}
DUT2=${OPTARG}
;;
L)
LANFORGE_DUT=${OPTARG}
;;
H)
./lf_help_check.bash
;;
*)
;;
esac
done
if [[ ${#SSID_USED} -eq 0 ]]; then #Network credentials
SSID_USED="jedway-wpa2-x2048-5-3"
PASSWD_USED="jedway-wpa2-x2048-5-3"
SECURITY="wpa2"
fi
if [[ ${#RADIO_USED} -eq 0 ]]; then # Allow the user to change the radio they test against
RADIO_USED="wiphy1"
fi
if [[ ${#MGR} -eq 0 ]]; then # Allow the user to change the radio they test against
MGR="localhost"
fi
if [[ ${#UPSTREAM} -eq 0 ]]; then
UPSTREAM="eth1"
fi
if [[ ${#BSSID} -eq 0 ]]; then
BSSID="04:f0:21:2c:41:84"
fi
FILE="/tmp/gui-update.lock"
if test -f "$FILE"; then
echo "Finish updating your GUI"
exit 0
fi
HOMEPATH=$(realpath ~)
if [[ ${#RC_FILE} -gt 0 ]]; then
source "$RC_FILE"
fi
if [[ ${#SSID_USED} -gt 0 ]]; then
if [ -f ./regression_test.rc ]; then
source ./regression_test.rc # this version is a better unix name
elif [ -f ./regression_test.txt ]; then
source ./regression_test.txt # this less unixy name was discussed earlier
fi
fi
NUM_STA=${NUM_STA:-4}
TEST_HTTP_IP=${TEST_HTTP_IP:-10.40.0.1}
MGRLEN=${#MGR}
COL_NAMES="name,tx_bytes,rx_bytes,dropped"
if [[ ${#DUT2} -eq 0 ]]; then
DUT5="linksys-8450 Default-SSID-5gl c4:41:1e:f5:3f:25"
DUT2="linksys-8450 Default-SSID-2g c4:41:1e:f5:3f:24"
fi
#CURR_TEST_NUM=0
CURR_TEST_NAME="BLANK"
REPORT_DIR="${HOMEPATH}/html-reports"
if [ ! -d "$REPORT_DIR" ]; then
echo "Report directory [$REPORT_DIR] not found, bye."
exit 1
fi
REPORT_DATA="${HOMEPATH}/report-data"
if [ ! -d "${REPORT_DATA}" ]; then
echo "Data directory [$REPORT_DATA] not found, bye."
exit 1
fi
TEST_DIR="${REPORT_DATA}/${NOW}"
function run_l3_longevity() {
./test_l3_longevity.py --test_duration 15s --upstream_port eth1 --radio "radio==wiphy0 stations==4 ssid==$SSID_USED ssid_pw==$PASSWD_USED security==$SECURITY" --radio "radio==wiphy1 stations==4 ssid==$SSID_USED ssid_pw==$PASSWD_USED security==$SECURITY" --lfmgr "$MGR"
}
function testgroup_list_groups() {
./scenario.py --load test_l3_scenario_throughput
./testgroup.py --group_name group1 --add_group --add_cx cx0000,cx0001,cx0002 --remove_cx cx0003 --list_groups --debug --mgr "$MGR"
}
function testgroup_list_connections() {
./scenario.py --load test_l3_scenario_throughput
./testgroup.py --group_name group1 --add_group --add_cx cx0000,cx0001,cx0002 --remove_cx cx0003 --show_group --debug --mgr "$MGR"
}
function testgroup_delete_group() {
./scenario.py --load test_l3_scenario_throughput
./testgroup.py --group_name group1 --add_group --add_cx cx0000,cx0001,cx0002 --remove_cx cx0003
./testgroup.py --group_name group1--del_group --debug --mgr "$MGR"
}
if [[ ${#SHORT} -gt 0 ]]; then
testCommands=(
run_l3_longevity
"./test_ip_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format csv --layer3_cols $COL_NAMES --debug --mgr $MGR --traffic_type lf_udp"
)
else
testCommands=(
"./create_bond.py --network_dev_list eth0,eth1 --debug --mgr $MGR"
"./create_bridge.py --radio $RADIO_USED --upstream_port eth1 --target_device sta0000 --debug --mgr $MGR"
"./create_chamberview.py -m $MGR -cs \"regression_test\" \
--line \"Resource=1.1 Profile=STA-AC Amount=1 Uses-1 $RADIO_USED Freq=-1 DUT=TEST DUT_RADIO=$RADIO_USED Traffic=http\" \
--line \"Resource=1.1 Profile=upstream Amount=1 Uses-1=eth1 Uses-2=AUTO Freq=-1 DUT=Test DUT_RADIO=$RADIO_USED Traffic=http\""
"./create_chamberview_dut.py --lfmgr $MGR --dut_name regression_dut \
--ssid \"ssid_idx=0 ssid=\"$SSID_USED\" security=\"$SECURITY\" password=\"$PASSWD_USED\" bssid=04:f0:21:2c:41:84\""
"./create_l3.py --radio $RADIO_USED --ssid $SSID_USED --password $PASSWD_USED --security $SECURITY --debug --mgr $MGR --endp_a wiphy0 --endp_b wiphy1"
"./create_l3_stations.py --mgr $MGR --radio $RADIO_USED --ssid $SSID_USED --password $PASSWD_USED --security $SECURITY --debug"
"./create_l4.py --radio $RADIO_USED --ssid $SSID_USED --password $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./create_macvlan.py --radio 1.$RADIO_USED --macvlan_parent eth1 --debug --mgr $MGR"
"./create_qvlan.py --first_qvlan_ip 192.168.1.50 --mgr $MGR --qvlan_parent eth1"
"./create_station.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./create_vap.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./create_vr.py --mgr $MGR --vr_name 2.vr0 --ports 2.br0,2.vap2 --services 1.br0=dhcp,nat --services 1.vr0=radvd --debug"
#./csv_convert
#./csv_processor
#./csv_to_grafana
#./csv_to_influx
#"./cv_manager.py --mgr $MGR --scenario FACTORY_DFLT"
#"./cv_to_grafana --mgr $MGR "
#"./docstrings.py --mgr $MGR"
#"./scripts_deprecated/event_break_flood.py --mgr $MGR"
"./example_security_connection.py --num_stations $NUM_STA --ssid $SSID_USED \
--passwd $PASSWD_USED --radio 1.1.$RADIO_USED --security wpa2 --debug --mgr $MGR"
#./ftp_html.py
#./grafana_profile
"./layer3_test.py --mgr $MGR --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --radio $RADIO_USED"
"./layer4_test.py --mgr $MGR --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY"
"./lf_ap_auto_test.py --mgr $MGR --port 8080 --lf_user lanforge --lf_password lanforge \
--instance_name ap-auto-instance --config_name test_con --upstream 1.1.eth2 \
--dut5_0 \"$DUT5 (2)\" --dut2_0 \"$DUT2 (1)\" --max_stations_2 100 --max_stations_5 100 --max_stations_dual 200 \
--radio2 1.1.wiphy0 --radio2 1.1.wiphy1 --set \"Basic Client Connectivity\" 1 --set \"Multi Band Performance\" 1 \
--set \"Skip 2.4Ghz Tests\" 1 --set \"Skip 5Ghz Tests\" 1 --set \"Throughput vs Pkt Size\" 0 --set \"Capacity\" 0 \
--set \"Stability\" 0 --set \"Band-Steering\" 0 --set \"Multi-Station Throughput vs Pkt Size\" 0 \
--set \"Long-Term\" 0 --pull_report --influx_host c7-graphana --influx_port 8086 --influx_org Candela \
--influx_token=-u_Wd-L8o992701QF0c5UmqEp7w7Z7YOMaWLxOMgmHfATJGnQbbmYyNxHBR9PgD6taM_tcxqJl6U8DjU1xINFQ== \
--influx_bucket ben --influx_tag testbed Ferndale-01"
"./lf_atten_mod_test.py --host $MGR --debug"
#./lf_csv
#./lf_dataplane_config
"./lf_dataplane_test.py --mgr $MGR --lf_user lanforge --lf_password lanforge \
--instance_name dataplane-instance --config_name test_con --upstream 1.1.$UPSTREAM \
--dut linksys-8450 --duration 15s --station 1.1.sta01500 \
--download_speed 85% --upload_speed 0 \
--test_rig Testbed-01 --pull_report \
--influx_host c7-graphana --influx_port 8086 --influx_org Candela \
--influx_token=-u_Wd-L8o992701QF0c5UmqEp7w7Z7YOMaWLxOMgmHfATJGnQbbmYyNxHBR9PgD6taM_tcxqJl6U8DjU1xINFQ== \
--influx_bucket ben \
--influx_tag testbed Ferndale-01"
#"./lf_dut_sta_vap_test.py --mgr $MGR --radio $RADIO_USED \
#--num_sta 1 --sta_id 1 --ssid $SSID_USED --security $SECURITY --upstream $UPSTREAM \
#--protocol lf_udp --min_mbps 1000 --max_mbps 10000 --duration 1"
"./lf_graph.py --mgr $MGR"
"./lf_mesh_test.py --mgr $MGR --upstream $UPSTREAM --raw_line \"selected_dut2 RootAP wactest $BSSID\""
#"./lf_multipsk.py --mgr $MGR --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --radio $RADIO_USED --debug"
"./lf_report.py"
"./lf_report_test.py"
"./lf_rvr_test.py"
"./lf_rx_sensitivity_test.py --mgr $MGR --port 8080 --lf_user lanforge --lf_password lanforge \
--instance_name rx-sensitivity-instance --config_name test_con --upstream 1.1.eth2 \
--dut linksys-8450 --duration 15s --station 1.1.sta01500 \
--download_speed 85% --upload_speed 0 \
--raw_line \"txo_preamble\: VHT\" \
--raw_line \"txo_mcs\: 4 OFDM, HT, VHT;5 OFDM, HT, VHT;6 OFDM, HT, VHT;7 OFDM, HT, VHT\" \
--raw_line \"spatial_streams\: 3\" \
--raw_line \"bandw_options\: 80\" \
--raw_line \"txo_sgi\: ON\" \
--raw_line \"txo_retries\: No Retry\" \
--raw_line \"txo_txpower\: 17\" \
--test_rig Testbed-01 --pull_report \
--influx_host c7-graphana --influx_port 8086 --influx_org Candela \
--influx_token=-u_Wd-L8o992701QF0c5UmqEp7w7Z7YOMaWLxOMgmHfATJGnQbbmYyNxHBR9PgD6taM_tcxqJl6U8DjU1xINFQ== \
--influx_bucket ben \
--influx_tag testbed Ferndale-01"
"./lf_sniff_radio.py
--mgr $MGR
--mgr_port 8080
--outfile /home/lanforge/test_sniff.pcap
--duration 20
--channel 52
--radio_mode AUTO"
"./lf_snp_test.py --mgr $MGR"
"./lf_tr398_test.py --mgr $MGR"
#./lf_webpage
"./lf_wifi_capacity_test.py --mgr $MGR --port 8080 --lf_user lanforge --lf_password lanforge \
--instance_name this_inst --config_name test_con --upstream 1.1.eth2 --batch_size 1,5,25,50,100 --loop_iter 1 \
--protocol UDP-IPv4 --duration 6000 --pull_report --ssid $SSID_USED --paswd $PASSWD_USED --security $SECURITY\
--test_rig Testbed-01 --create_stations --stations 1.1.sta0000,1.1.sta0001"
#--influx_host c7-graphana --influx_port 8086 --influx_org Candela \
#--influx_token=-u_Wd-L8o992701QF0c5UmqEp7w7Z7YOMaWLxOMgmHfATJGnQbbmYyNxHBR9PgD6taM_tcxqJl6U8DjU1xINFQ== \
#--influx_bucket ben \
#"./measure_station_time_up.py --radio $RADIO_USED --num_stations 3 --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED --debug --report_file measure_station_time_up.txt"
"./create_stations.py --radio $RADIO_USED --security $SECURITY --ssid $SSID_USED --passwd $PASSWD_USED && ./modify_station.py
--radio $RADIO_USED
--station 1.1.sta0000
--security $SECURITY
--ssid $SSID_USED
--passwd $PASSWD_USED
--enable_flag osen_enable
--disable_flag ht160_enable
--debug"
"./modify_vap.py --radio $RADIO_USED --vap 1.1.vap0000 --security $SECURITY --ssid $SSID_USED \
--passwd $PASSWD_USED --enable_flag osen_enable --disable_flag ht160_enable --debug"
#recordinflux.py
"./rvr_scenario.py --lfmgr $MGR --lanforge_db 'handsets' --cv_test Dataplane \
--test_profile http --cv_scenario ct-us-001"
#scenario.py
#"./sta_connect2.py --dest 192.168.100.209 --dut_ssid OpenWrt-2 --dut_bssid 24:F5:A2:08:21:6C"
#./sta_connect_bssid_mac.py
"./sta_connect_example.py --mgr $MGR --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --radio $RADIO_USED"
#sta_connect.py
"./sta_scan_test.py --ssid $SSID_USED --security $SECURITY --passwd $PASSWD_USED \
--radio $RADIO_USED"
#station_layer3.py
#stations_connected.py
#"./test_1k_clients_jedtest.py
# --mgr $MGR
# --mgr_port 8080
# --sta_per_radio 300
# --test_duration 3m
# --a_min 1000
# --b_min 1000
# --a_max 0
# --b_max 0
# --debug"
#test_client_admission.py
"./test_fileio.py --macvlan_parent eth2 --num_ports 3 --use_macvlans --first_mvlan_ip 192.168.92.13 --netmask 255.255.255.0 --gateway 192.168.92.1 --test_duration 30s --mgr $MGR" # Better tested on Kelly, where VRF is turned off
#"./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --num_stations $NUM_STA --type lfping --dest $TEST_HTTP_IP --debug --mgr $MGR"
#"./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --num_stations $NUM_STA --type speedtest --speedtest_min_up 20 --speedtest_min_dl 20 --speedtest_max_ping 150 --security $SECURITY --debug --mgr $MGR"
#"./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --num_stations $NUM_STA --type iperf3 --debug --mgr $MGR"
#"./test_generic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --num_stations $NUM_STA --type lfcurl --dest $TEST_HTTP_IP --file_output ${HOMEPATH}/Documents/lfcurl_output.txt --debug --mgr $MGR"
"./testgroup.py --group_name group1 --add_group --list_groups --debug --mgr $MGR"
#"./testgroup2.py --num_stations 4 --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --radio $RADIO_USED --group_name group0 --add_group --mgr $MGR"
"./test_ip_connection.py --radio $RADIO_USED --num_stations $NUM_STA --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./test_ip_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format excel --layer3_cols $COL_NAMES --debug --mgr $MGR --traffic_type lf_udp"
"./test_ip_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --output_format csv --layer3_cols $COL_NAMES --debug --mgr $MGR --traffic_type lf_udp"
"./test_ip_connection.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR --ipv6"
"./test_ip_variable_time.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --test_duration 15s --debug --mgr $MGR --ipv6 --traffic_type lf_udp"
"./test_ipv4_ps.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./test_ipv4_ttls.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./test_l3_longevity.py --mgr $MGR --endp_type 'lf_udp lf_tcp' --upstream_port 1.1.$UPSTREAM \
--radio \"radio==1.1.wiphy0 stations==10 ssid==ASUS_70 ssid_pw==[BLANK] security==open\" \
--radio \"radio==1.1.wiphy1 stations==1 ssid==ASUS_70 ssid_pw==[BLANK] security==open\" \
--test_duration 5s --influx_host c7-graphana --influx_port 8086 --influx_org Candela \
--influx_token=-u_Wd-L8o992701QF0c5UmqEp7w7Z7YOMaWLxOMgmHfATJGnQbbmYyNxHBR9PgD6taM_tcxqJl6U8DjU1xINFQ== \
--influx_bucket ben --rates_are_totals --side_a_min_bps=20000 --side_b_min_bps=300000000 \
--influx_tag testbed regression_test --influx_tag DUT ROG -o longevity.csv"
"./test_l3_powersave_traffic.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
#"./test_l3_scenario_throughput.py -t 15s -sc test_l3_scenario_throughput -m $MGR"
#./test_l3_unicast_traffic_gen
#./test_l3_unicast_traffic_gen
#./test_l3_WAN_LAN
"./test_l4.py --radio $RADIO_USED --ssid $SSID_USED --passwd $PASSWD_USED --security $SECURITY --debug --mgr $MGR"
"./test_status_msg.py --debug --mgr $MGR" #this is all which is needed to run
#"./test_wanlink.py --name my_wanlink4 --latency_A 20 --latency_B 69 --rate 1000 --jitter_A 53 --jitter_B 73 --jitter_freq 6 --drop_A 12 --drop_B 11 --debug --mgr $MGR"
#./test_wpa_passphrases
#./tip_station_powersave
#./video_rates
"./wlan_capacity_calculator.py -sta 11abg -t Voice -p 48 -m 106 -e WEP -q Yes -b 1 2 5.5 11 -pre Long -s N/A -co G.711 -r Yes -c Yes"
"./wlan_capacity_calculator.py -sta 11n -t Voice -d 17 -ch 40 -gu 800 -high 9 -e WEP -q Yes -ip 5 -mc 42 -b 6 9 12 24 -m 1538 -co G.729 -pl Greenfield -cw 15 -r Yes -c Yes"
"./wlan_capacity_calculator.py -sta 11ac -t Voice -d 9 -spa 3 -ch 20 -gu 800 -high 1 -e TKIP -q Yes -ip 3 -mc 0 -b 6 12 24 54 -m 1518 -co Greenfield -cw 15 -rc Yes"
#"./ws_generic_monitor_test.py --mgr $MGR"
)
fi
#declare -A name_to_num
#if you want to run just one test as part of regression_test, you can call one test by calling its name_to_num identifier.
name_to_num=(
["create_bond"]=1
["create_bridge"]=2
["create_l3"]=3
["create_l4"]=4
["create_macvlan"]=5
["create_qvlan"]=6
["create_station"]=7
["create_va"]=8
["create_vr"]=9
["create_wanlink"]=10
["csv_convert"]=11
["csv_processor"]=12
["csv_to_grafana"]=13
["csv_to_influx"]=14
["cv_manager"]=15
["cv_to_grafana"]=16
["docstrings"]=17
["event_breaker"]=18
["event_flood"]=19
["example_security_connection"]=20
["ftp_html"]=21
["ghost_profile"]=22
["grafana_profile"]=23
["html_template"]=24
["influx"]=25
["layer3_test"]=26
["layer4_test"]=27
["lf_ap_auto_test"]=28
["lf_atten_mod_test"]=29
["lf_csv"]=30
["lf_dataplane_config"]=31
["lf_dataplane_test"]=32
["lf_dut_sta_vap_test"]=34
["lf_ft"]=35
["lf_ftp_test"]=36
["lf_graph"]=37
["lf_influx_db"]=38
["lf_mesh_test"]=39
["lf_multipsk"]=40
["lf_report"]=41
["lf_report_test"]=42
["lf_rvr_test"]=43
["lf_rx_sensitivity_test"]=44
["lf_sniff_radio"]=45
["lf_snp_test"]=46
["lf_tr398_test"]=47
["lf_webpage"]=48
["lf_wifi_capacity_test"]=49
["measure_station_time_u"]=50
["modify_station"]=51
["modify_va"]=52
["run_cv_scenario"]=53
["rvr_scenario"]=54
["scenario"]=55
["sta_connect"]=56
["sta_connect2"]=57
["sta_connect_bssid_mac"]=58
["sta_connect_example"]=59
["sta_connect_multi_example"]=60
["sta_connect_bssid_mac"]=61
["sta_connect_example"]=62
["sta_connect_multi_example"]=63
["sta_scan_test"]=64
["station_layer3"]=65
["stations_connected"]=66
["sta_scan_test"]=67
["station_layer3"]=68
["stations_connected"]=69
["test_1k_clients_jedtest"]=70
["test_client_admission"]=71
["test_fileio"]=72
["test_generic"]=73
["test_generic"]=74
["test_generic"]=75
["test_generic"]=76
["testgrou"]=77
["testgroup_list_groups"]=78
["testgroup_list_connections"]=79
["testgroup_delete_grou"]=80
["testgroup2"]=81
["test_ip_connection"]=82
["test_ip_variable_time"]=83
["test_ip_variable_time"]=84
["test_ip_connection"]=85
["test_ip_variable_time"]=86
["test_ipv4_ps"]=87
["test_ipv4_ttls"]=88
["test_l3_longevit"]=89
["test_l3_powersave_traffic"]=90
["test_l3_scenario_throughput"]=91
["test_l3_unicast_traffic_gen"]=92
["test_l3_unicast_traffic_gen"]=93
["test_l3_WAN_LAN"]=94
["test_l4"]=95
["test_status_msg"]=96
["test_wanlink"]=97
["test_wpa_passphrases"]=98
["tip_station_powersave"]=99
["vap_stations_example"]=100
["video_rates"]=101
["wlan_capacity_calculator"]=102
["wlan_capacity_calculator"]=103
["wlan_capacity_calculator"]=104
["ws_generic_monitor_test"]=105
)
function blank_db() {
echo "Loading blank scenario..." >>"${HOMEPATH}/regression_file.txt"
./scenario.py --load BLANK >>"${HOMEPATH}/regression_file.txt"
#check_blank.py
}
function echo_print() {
echo "Beginning $CURR_TEST_NAME test..." >>"${HOMEPATH}/regression_file.txt"
}
function test() {
if [[ $MGRLEN -gt 0 ]]; then
./scenario.py --load BLANK --mgr "${MGR}"
else
./scenario.py --load BLANK
fi
echo ""
echo "Test $CURR_TEST_NAME"
echo_print
echo "$i"
$i > "${TEST_DIR}/${NAME}.txt" 2> "${TEST_DIR}/${NAME}_stderr.txt"
chmod 664 "${TEST_DIR}/${NAME}.txt"
FILESIZE=$(stat -c%s "${TEST_DIR}/${NAME}_stderr.txt") || 0
if (( FILESIZE > 0)); then
echo "Errors detected"
results+=("<tr><td>${CURR_TEST_NAME}</td><td class='scriptdetails'>${i}</td>
<td class='failure'>Failure</td>
<td><a href=\"${URL2}/${NAME}.txt\" target=\"_blank\">STDOUT</a></td>
<td><a href=\"${URL2}/${NAME}_stderr.txt\" target=\"_blank\">STDERR</a></td></tr>")
else
echo "No errors detected"
results+=("<tr><td>${CURR_TEST_NAME}</td><td class='scriptdetails'>${i}</td>
<td class='success'>Success</td>
<td><a href=\"${URL2}/${NAME}.txt\" target=\"_blank\">STDOUT</a></td>
<td></td></tr>")
fi
}
function run_test() {
if [[ ${#A} -gt 0 ]]; then
for i in "${testCommands[@]}"; do
NAME=$(cat < /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 32 | head -n 1)
CURR_TEST_NAME=${i%%.py*}
CURR_TEST_NAME=${CURR_TEST_NAME#./*}
#CURR_TEST_NUM="${name_to_num[$CURR_TEST_NAME]}"
if [[ $A == "$CURR_TEST_NAME" ]]; then
test
fi
done
else
for i in "${testCommands[@]}"; do
NAME=$(cat < /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 32 | head -n 1)
CURR_TEST_NAME=${i%%.py*}
CURR_TEST_NAME=${CURR_TEST_NAME#./*}
#CURR_TEST_NUM="${name_to_num[$CURR_TEST_NAME]}"
test
done
fi
}
function html_generator() {
LAST_COMMIT=$(git log --pretty=oneline | tail -n 1)
header="<html>
<head>
<title>Regression Test Results $NOW</title>
<style>
.success {
background-color:green;
}
.failure {
background-color:red;
}
table {
border: 1px solid gray;
}
td {
margin: 0;
padding: 2px;
font-family: 'Courier New',courier,sans-serif;
}
h1, h2, h3, h4 {
font-family: 'Century Gothic',Arial,sans,sans-serif;
}
.scriptdetails {
font-size: 10px;
}
</style>
<script src=\"sortabletable.js\"></script>
</head>
<body>
<h1>Regression Results</h1>
<h4>$NOW</h4>
<h4>$LAST_COMMIT</h4>
<table border ='1' id='myTable2'>
<tr>
<th onclick=\"sortTable(0)\">Command Name</th>
<th onclick=\"sortTable(1)\">Command</th>
<th onclick=\"sortTable(2)\">Status</th>
<th onclick=\"sortTable(3)\">STDOUT</th>
<th onclick=\"sortTable(4)\">STDERR</th>
</tr>"
tail="</body>
</html>"
fname="${HOMEPATH}/html-reports/regression_file-${NOW}.html"
echo "$header" >> "$fname"
echo "${results[@]}" >> "$fname"
echo "</table>" >> "$fname"
echo "$tail" >> "$fname"
if [ -f "${HOMEPATH}/html-reports/latest.html" ]; then
rm -f "${HOMEPATH}/html-reports/latest.html"
fi
ln -s "${fname}" "${HOMEPATH}/html-reports/latest.html"
#HOSTNAME=$(ip -4 addr show enp3s0 | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
#content="View the latest regression report at /html-reports/latest.html"
#echo "${content}"
#mail -s "Regression Results" scripters@candelatech.com <<<$content
}
results=()
NOW=$(date +"%Y-%m-%d-%H-%M")
NOW="${NOW/:/-}"
TEST_DIR="${REPORT_DATA}/${NOW}"
URL2="/report-data/${NOW}"
mkdir "${TEST_DIR}"
echo "Recording data to $TEST_DIR"
run_test
html_generator
Reference in New Issue View Git Blame Copy Permalink