scottk/wlan-lanforge-scripts
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-lanforge-scripts.git synced 2025-11-04 04:38:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
73b9e148e461d8145f2edb51a4557896667284d3
wlan-lanforge-scripts/lf_macvlan.pl
Ben Greear 72712ff548 Add scripts from the tools directory in the private Candela repo. 
These scripts will now be publicly available in a git repo for
easier shared development and change tracking.
2017-10-06 13:41:50 -07:00

1510 lines
44 KiB
Prolog
Executable File
Raw Blame History

#!/usr/bin/perl
# This program is used to stress test the LANforge system, and may be used as
# an example for others who wish to automate LANforge tests.
# This script sets up connections of types:
# lf, lf_udp, lf_tcp, custom_ether, custom_udp, custom_tcp, l4 (http, https, ftp and fileIO)
# across real ports and MACVLAN ports on one or more machines.
# It then continously starts and stops the connections.
# Un-buffer output
$| = 1;
use strict;
#use Switch;
use Net::Telnet ();
use LANforge::Port;
use LANforge::Utils;
my $script_speed = 25; # Increase to issue commands faster.
my $pause = 0; # Increase delay (seconds) if experiencing problems on slow systems.
my $INIT = 0; # If true, removes all previous tests and ports!!!
my $create_only = 1; # If true, only create tests, i.e. do not automatically run them.
my $mac_init = 0; # Set to 1 to start MAC address from zero when running looped test.
my $ip_init = 0; # Set to 1 to start IP addresses from zero when running looped test.
my $init_once = 0; # Set to 1 to only initialize test creation once.
my $init_net = 1; # Set to 0 to disable reconfiguring MAC and IP addresses.
my $init_tests = 1; # Set to 0 to disable reconfiguring tests.
my $first_run = 1; # Set to 0 to disable initial configurations.
my $name_id = 0; # First index of name of endpoints and CXs.
my $name_id_len = 0; # Override for length of $name_id.
my $loop_max = 100;
my $start_stop_loops = 2;
my $run_for_time = 120; # Run for XX seconds..then will be stopped again
my $stop_for_time = 5; # Run for XX seconds..then will be stopped again
my $ignore_phys_ports = 1; # If true, just muck with mac-vlans.
my $one_cx_per_port = 0; # If zero, will have one of EACH of the cx types on each port.
my $cx_types_from_file = 0; # If true, will rotate through the @cx_types_files
# when creating tests instead of using @cx_types array.
#cx_types files must be CSV.
my @cx_types_files = ("/tmp/cx_type-foo.txt", "/tmp/cx_type-foo1.txt");
#my @cx_types = ("lf", "lf_udp", "lf_tcp", "custom_udp", "custom_tcp", "l4", "voip");
#my @min_pkt_szs = (64, 1, 1, 1, 1, 0);
#my @max_pkt_szs = (1514, 12000, 13000, 2048, 2048, 0);
#my @cx_types = ("lf_udp");
my @cx_types = ("lf_tcp");
#my @cx_types = ("l4", "l4", "l4", "l4", "l4", "l4", "l4", "l4", "l4", "l4");
#my @cx_types = ("l4");
#my @cx_types = (
#"lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp", "lf_udp"
#,"l4");
my $test_mgr = "ben_tm";
my $report_timer = 8000; # Set report timer for all tests created in ms, i.e. 8 seconds
my $lfmgr_host = undef;
my $lfmgr_port = 4001;
my $shelf = 1;
# This sets up connections.
my $lf1 = 1; # Minor Resource EID of first LANforge resource.
my $lf2 = ""; # Set to "" if we have no second machine. Or set to second Resource
# minor EID to create mac-vlans on it.
# Port pairs. These are the ports that should be talking to each other.
# i.e. the third column in lf1_ports talks to the third column in lf2_ports.
# EIDs or aliases can be used.
# Port pairs must match on each shelf - will enhance to allow any pair on each shelf.
#my @lf1_ports = (1); #, 2, 3);
#my @lf2_ports = (2); #, 2, 3);
my @lf1_ports = ( "eth0", "eth1");
my @lf2_ports = ("");
my @ip_base = ( "192.168", "172.16");
my @ip_c = ( 2 , 1 );
my @ip_lsb = ( 2 , 2 );
my @msk = ("255.255.0.0", "255.255.0.0");
my @ip_gw = ("192.168.2.1", "172.16.1.1");
#my $ip_base1 = "172.16"; # Use this set.
#my $ip_c1 = 2; #
#my $ip_lsb1 = 2; #
#my $msk1 = "255.255.0.0"; #
#my $ip_gw1 = "0.0.0.0"; #
my $mac1 = 0x00; # Starting MAC address 00:m5:m4:m3:m2:m1 where:
my $mac2 = 0x00; # m5 is shelf EID, m4 is card EID, m3 is $mac3,
my $mac3 = 0x00; # m2 is $mac2 and m1 is $mac1.
my $mvl = 1;
my $start_mvlan = 0;
my $num_mvlans = 9;
my $num_cxs = 10;
#my @min_rate = (100000);# bps
#my @max_rate = (100000);# bps
my @min_rate = (9600, 64000, 1000000, 9600); # bps
my @max_rate = (9600, 64000, 1000000, 1000000);# bps
#my @min_pkt_szs = (0); # bytes
#my @max_pkt_szs = (0); # bytes
my @min_pkt_szs = (40, 548, 1472, 40); # bytes
my @max_pkt_szs = (40, 548, 1472, 1472); # bytes
################
# Layer-4 Only #
################
my $url_dl = 1; # If true, test will download from URL. False will upload to URL.
#my $l4_dl_path = "/tmp"; # Path to save downloaded file.
#my $l4_dl_path = "NUL"; # Windows equivalent of *nix /dev/null.
my $l4_dl_path = "/dev/null"; # Improve performance by saving downloaded file to /dev/null.
#my @l4_urls = (
# "http://192.168.100.3/index.html", "ftp://192.168.100.3/file", "http://192.168.100.3/index.html", "ftp://192.168.100.3/file"
#,"http://192.168.100.3/index.html", "ftp://192.168.100.3/file", "http://192.168.100.3/index.html", "ftp://192.168.100.3/file"
#,"http://192.168.100.3/index.html", "ftp://192.168.100.3/file", "http://192.168.100.3/index.html", "ftp://192.168.100.3/file"
#,"http://192.168.100.3/index.html", "ftp://192.168.100.3/file", "http://192.168.100.3/index.html", "ftp://192.168.100.3/file"
#,"http://192.168.100.3/index.html", "ftp://192.168.100.3/file", "http://192.168.100.3/index.html", "ftp://192.168.100.3/file"
#);
my @l4_urls = ("http://192.168.100.3/index.html");
#my @l4_urls = ("ftp://192.168.100.3/file");
my $urls_10m = 100; # How many URLs to process every 10 minutes.
my $l4_timeout = 10000; # How long to wait for a connection, in milliseconds.
#############
# VoIP Only #
#############
my $codec = "G711U"; # Other options: G711U, g729a, SPEEX, g726-16, g726-24, g726-32, g726-40
my $jB_size = 1; # Set jitter buffer size in 20ms packets. Default value is 8 packets, 160ms.
my $tos = 0xBE; # Set ToS/QoS for VoIP can be decimal or 0xNN for hexadecimal but values will display in decimal in the GUI.
my $mn_icg = 3; # minimum intercall gap
my $mx_icg = 3; # maximum intercall gap
my $min_call_duration = 0; # set to zero for 'file'
my $max_call_duration = 0; # Set to zero for 'file'
my $no_send_rtp = 0; # Set to zero to send RTP traffic, 1 to suppress RTP
my $use_VAD = 0; # Set to zero to not use VAD, 1 to use VAD
my $vad_timer = 500; # how much silence (ms) before we start VAD (Silence Suppression)
my $vad_fs = 3000; # how often (ms) to force an rtp pkt send even if we are in VAD
my $use_PESQ = 0; # Set to 1 for PESQ, zero for not PESQ
my $pesq_server = "127.0.0.1";
my $pesq_server_port = 3998;
my $vproto = "SIP"; # set $vproto = "H323"; for H.323
my $bsip_port_a = "5066"; # Base SIP port for endpoint-A
my $bsip_port_b = "5067"; # Base SIP port for endpoint-B
my $i_sip_port_a = 0; # If zero, do not increment, otherwise increment by assigned value.
my $i_sip_port_b = 0; # If zero, do not increment, otherwise increment by assigned value.
my $brtp_port = "AUTO"; # Base RTP port
my $i_rtp_port = 0; # If zero, do not increment, otherwise increment by assgined value
my $peer_to_peer_voip = 1; # Don't register with SIP proxy, but just call peer to peer.
my @src_sound_files = ("media/female_voice_8khz.wav");
################
# File-IO Only #
################
my $fio_base = "/mnt/fio_base";
my $fio_targ_dir = "";
my $fsrw = "write";
my $DEBUG = 0;
my $D_PAUSE = 3;
########################################################################
# Nothing to configure below here, most likely.
########################################################################
my $script_name = $0;
# Parse cmd-line args
my $i;
for ($i = 0; $i<@ARGV; $i++) {
my $var = $ARGV[$i];
if ($var =~ m/(\S+)=(.*)/) {
my $arg = $1;
my $val = $2;
handleCmdLineArg($arg, $val);
}
else {
handleCmdLineArg($var);
}
}
if ($lfmgr_host eq undef) {
print "\nYou must define a LANforge Manager!!!\n\n"
. "For example:\n"
. "./$script_name mgr=localhost\n"
. "OR\n"
. "./$script_name mgr=192.168.1.101\n\n";
printHelp();
exit (1);
}
my $foundL4 = 0;
for ($i = 0; $i<@cx_types; $i++) {
if ($cx_types[$i] eq "l4") {
$foundL4 = 1;
last;
}
}
if ($lf2 == "" && @lf1_ports < 2 && !$foundL4) {
die ("Must have more than one port with only one resource.");
}
if (!$num_mvlans) { $mvl=0; }
#if (!$start_mvlan && !$num_mvlan && $num_cxs) {
# die ("Must have either number of MACVLANs (num_mvl) or cross-connects (num_cxs) > 0.");
#}
print
"\nStarting script with the following arguments:"
. "\ninit: $INIT"
. "\nmanager: $lfmgr_host\n"
. "\nlf1: $lf1\nlf2: $lf2\n"
. "\nlf1_ports: " . join(" ", @lf1_ports)
. "\nlf2_ports: " . join(" ", @lf2_ports) . "\n"
. "\nstart_macvlans: $start_mvlan"
. "\nnum_mvlans: $num_mvlans\n"
. "\nmin_rates: " . join(" ", @min_rate)
. "\nmax_rates: " . join(" ", @max_rate)
. "\nmin_pkt_sizes: " . join(" ", @min_pkt_szs)
. "\nmax_pkt_sizes: " . join(" ", @max_pkt_szs) . "\n"
. "\ncx_types: " . join(" ", @cx_types)
. "\nnum_cxs: $num_cxs\n"
. "\none_cx_per_port: $one_cx_per_port\n\n";
if ($DEBUG) { sleep ($D_PAUSE); }
# Determine total port and endpoint counts and make sorting by name easier in the GUI :P
my @num = (); # Formatted index number for name sorting in GUI.
my $t_num = 0;
my $t_ports = 0;
my $ni=0;
my $nj=0;
my @lf1orig_ports = @lf1_ports;
my @lf2orig_ports = @lf2_ports;
my $lf2orig = $lf2;
if ($lf2 == "") {
$lf2 = $lf1;
if ($foundL4) {
@lf2_ports = undef;
}
else {
# Put every other port into @lf2_ports to fake out lf2 info which makes the
# script work later.
# TODO: Stop faking out too early since we end up probing the same ports multiple times
# because of $num_cxs. This needs to move to below utils->updatePort @all_ports1
# and @all_ports2
@lf1_ports = undef;
@lf2_ports = undef;
$i=0;
if ($mvl) {
for ($ni=0; $ni<@lf1orig_ports; $ni++) {
$lf1_ports[$i] = $lf1orig_ports[$ni];
$lf2_ports[$i] = $lf1orig_ports[++$ni];
$i++;
}
} else {
for ($nj=0; $nj<($num_cxs*2); $nj++) {
for ($ni=0; $ni<(@lf1orig_ports); $ni++) {
$lf1_ports[$i] = $lf1orig_ports[$ni];
$lf2_ports[$i] = $lf1orig_ports[++$ni];
$i++;
}
}
} # if mvl
} # if foundL4
} # if lf2 = ""
if ($DEBUG) { printArgs(); sleep ($D_PAUSE); }
# Check that ip_base address pairs aren't the same.
for ($ni = 0; $ni<@ip_base; $ni++) {
if ($ip_base[$ni] == $ip_base[$ni+1]) {
die ("ERROR: Base IP addresses cannot be the same.");
}
$ni++;
}
my @cxts = ("lf", "lf_udp", "lf_tcp", "custom_udp", "custom_tcp", "l4",
"fileIONFS", "fileIOCIFS");
my @t_cxts = ();
for ($ni=0; $ni<@cxts; $ni++) {
@t_cxts[$ni] = 0;
}
if ($lf2orig ne "") {
if ($ignore_phys_ports) {
$t_ports = $num_mvlans;
}
else {
$t_ports = @lf1_ports + @lf2_ports + ($num_mvlans);
if (@lf2_ports eq undef) { $t_ports--; }
}
}
elsif ($num_mvlans) {
if ($ignore_phys_ports) {
$t_ports = $num_mvlans;
}
else {
$t_ports = @lf1_ports + ($num_mvlans);
}
}
else {
$t_ports = @lf1_ports + @lf2_ports;
if (@lf2_ports eq undef) { $t_ports--; }
$t_ports *= $num_cxs;
}
my $t_cxtypes = @cx_types;
my $t_urls = @l4_urls;
if (@min_rate != @max_rate ) {
die("Number of elements in min_rate does not match number of elements in max_rate.");
}
else {
my $t_rate = @min_rate + @max_rate;
}
if (@min_pkt_szs != @max_pkt_szs ) {
die("Number of elements in min_pkt_szs does not match number of elements in max_pkt_szs.");
}
else {
my $t_pkt_szs = @min_pkt_szs + @max_pkt_szs;
}
for ($ni=0; $ni<@cx_types; $ni++) {
for ($nj=0; $nj<@cxts; $nj++) {
if ( $cx_types[$ni] eq $cxts[$nj] ) {
$t_cxts[$nj]++;
}
}
}
for ($nj=0; $nj<@cxts; $nj++) {
if ( $cxts[$nj] eq "l4") {
$t_num += ($t_ports * (2 * ($t_cxts[$nj] * $t_urls)));
}
else {
$t_num += ($t_ports * (2 * $t_cxts[$nj]));
}
}
$t_num += $name_id;
my $num_len;
if ($name_id_len) {
if (length($name_id) > $name_id_len || length($t_num) > $name_id_len) {
print "\nWARNING: id_len specifies a string length less that first_name_id or less that total number of endpoints\n";
}
$num_len = $name_id_len;
}
else {
$num_len = length ($t_num);
}
$t_num -= $name_id;
my $i = 0;
# !!! DO NOT Reimplement Switch/Case since the following will cause switch/case to fail:
# !!! for ($nj=0; $nj<($num_cxs / @lf1orig_ports); $nj++) {
# !!! Why? DUNNO!
#switch ($num_len) {
# case 1 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%01d", $name_id + $i);
# }
# }
# case 2 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%02d", $name_id + $i);
# }
# }
# case 3 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%03d", $name_id + $i);
# }
# }
# case 4 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%04d", $name_id + $i);
# }
# }
# case 5 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%05d", $name_id + $i);
# }
# }
# case 6 {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = sprintf("%06d", $name_id + $i);
# }
# }
# else {
# for ($i ; $i<$t_num; $i++) {
# $num[$i] = $name_id + $i;
# }
# }
#}
if ($num_len == 1) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%01d", $name_id + $i);
}
}
elsif ($num_len == 2) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%02d", $name_id + $i);
}
}
elsif ($num_len == 3) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%03d", $name_id + $i);
}
}
elsif ($num_len == 4) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%04d", $name_id + $i);
}
}
elsif ($num_len == 5) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%05d", $name_id + $i);
}
}
elsif ($num_len == 6) {
for ($i ; $i<$t_num; $i++) {
$num[$i] = sprintf("%06d", $name_id + $i);
}
}
else {
for ($i ; $i<$t_num; $i++) {
$num[$i] = $name_id + $i;
}
}
if ($DEBUG > 99) {
$i = 0;
print "name_id: $name_id, t_num: $t_num, num_len: $num_len :-\n";
for ($i ; $i<$t_num; $i++) {
print $num[$i] . " ";
}
print "\n";
sleep ($D_PAUSE);
}
if ($DEBUG) { printArgs(); sleep ($D_PAUSE); }
# Open connection to the LANforge server.
my $t = new Net::Telnet(Timeout => 15,
Prompt => '/default\@btbits\>\>/');
$t->open(Host => $lfmgr_host,
Port => $lfmgr_port,
Timeout => 45);
$t->waitfor("/btbits\>\>/");
$t->max_buffer_length(1024 * 1024 * 10); # 10M buffer
# Configure our utils.
my $utils = new LANforge::Utils();
$utils->telnet($t); # Set our telnet object.
$utils->cli_send_silent(0); # Do show input to CLI
$utils->cli_rcv_silent(0); # Repress output from CLI ??
my $dt = getDate();
my $dt_start = $dt;
my @endpoint_names = (); #will be added to as they are created
my @cx_names = ();
my $loop = 0;
for ($loop = 0; $loop<$loop_max; $loop++) {
$dt = getDate();
print "\n\n***** Starting $script_name loop: $loop at: $dt *****\n\n";
if (!$init_once) {
if ($INIT) { initToDefaults(); }
if ($init_net) {
if ($mvl) { addMacVlans(); } # Add MACVLANs.
initIpAddresses(); # Add some IP addresses to the ports.
}
if ($init_tests) {
doCmd("rm_cx $test_mgr all");
doCmd("rm_endp YES_ALL");
doCmd("rm_test_mgr $test_mgr");
doCmd("add_tm $test_mgr");
doCmd("tm_register $test_mgr default"); # Add default user
doCmd("tm_register $test_mgr default_gui"); # Add default GUI user
addCrossConnects(); # Add our endpoints.
}
}
elsif ($first_run) {
$first_run = 0;
if ($INIT) { initToDefaults(); }
if ($init_net) {
if ($mvl) { addMacVlans(); }
initIpAddresses();
}
if ($init_tests) {
doCmd("rm_cx $test_mgr all");
doCmd("rm_endp YES_ALL");
doCmd("rm_test_mgr $test_mgr");
doCmd("add_tm $test_mgr");
doCmd("tm_register $test_mgr default"); # Add default user
doCmd("tm_register $test_mgr default_gui"); # Add default GUI user
addCrossConnects(); # Add our endpoints.
}
}
$dt = getDate();
print "\n\n*** Started $script_name script at : $dt_start ***\n"
. "*** Finished $script_name configuration at: $dt ***\n\n";
sleep($D_PAUSE);
if ($create_only == 1) { exit(0); }
my $rl = 0;
for ($rl = 0; $rl<$start_stop_loops; $rl++) {
if (($rl % 2) == 0) {
doCmd("set_cx_state $test_mgr all RUNNING");
}
else {
# Do one at a time
my $q = 0;
for ($q = 0; $q<@cx_names; $q++) {
my $cmd = "set_cx_state $test_mgr " . $cx_names[$q] . " RUNNING";
doCmd($cmd);
}
}
print "Done starting endpoints...sleeping $run_for_time seconds.\n";
sleep($run_for_time);
# Now, stop them...
if (($rl % 2) == 0) {
doCmd("set_cx_state $test_mgr all STOPPED");
}
else {
# Do one at a time
my $q = 0;
for ($q = 0; $q<@cx_names; $q++) {
my $cmd = "set_cx_state $test_mgr " . $cx_names[$q] . " STOPPED";
doCmd($cmd);
}
}
sleep($stop_for_time);
}# For some amount of start_stop iterations...
}# for some amount of loop iterations
if ($DEBUG) { printArgs(); }
$dt = getDate();
print "Started $script_name script at : $dt_start\n";
print "Completed $script_name script at: $dt\n\n";
exit(0);
#####################
# END lf_macvlan.pl #
#####################
sub addCrossConnects {
my $ep = 0;
my $cx = 0;
my $i = 0;
my $szs = 0;
my $r = 0;
my @all_ports1 = @lf1_ports;
# my @all_ports1 = @lf1orig_ports; This don't work
my @all_ports2 = ("");
my $j;
my $pname;
if ($foundL4) {
my $p1 = new LANforge::Port();
my $q;
for ($q = $start_mvlan; $q<($num_mvlans + $start_mvlan); $q++) {
for ($j = 0; $j<@lf1_ports; $j++) {
$utils->updatePort($p1, $shelf, $lf1, $lf1_ports[$j]);
$pname = $p1->{dev};
@all_ports1 = (@all_ports1, "$pname\#$q");
}
}
if ($ignore_phys_ports) {
for ($j = 0; $j<@lf1_ports; $j++) {
shift(@all_ports1);
}
}
# TODO: Fake out ports here to create num_cxs tests.
}
else {
for ($j = 0; $j<@lf1_ports; $j++) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf1, $lf1_ports[$j]);
$pname = $p1->{dev};
my $q;
for ($q = $start_mvlan; $q<($num_mvlans + $start_mvlan); $q++) {
@all_ports1 = (@all_ports1, "$pname\#$q");
}
}
@all_ports2 = @lf2_ports;
# @all_ports2 = @lf2orig_ports; This don't work
for ($j = 0; $j<@lf2_ports; $j++) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf2, $lf2_ports[$j]);
$pname = $p1->{dev};
my $q;
for ($q = $start_mvlan; $q<($num_mvlans + $start_mvlan); $q++) {
@all_ports2 = (@all_ports2, "$pname\#$q");
}
}
if ($ignore_phys_ports) {
for ($j = 0; $j<@lf1_ports; $j++) {
shift(@all_ports1);
}
for ($j = 0; $j<@lf2_ports; $j++) {
shift(@all_ports2);
}
}
# TODO: Fake out ports here to create num_cxs tests.
} # if foundL4
print "\n\n\nCreating endpoints on " . @all_ports1 . " ports:\nall_ports1: " . join(" ", @all_ports1);
# if ($lf2orig ne "") {
print "\nCreating endpoints on " . @all_ports2 . " ports:\nall_ports2: " . join(" ", @all_ports2) . "\n\n\n";
# }
if ($DEBUG) { sleep($D_PAUSE); }
if ($one_cx_per_port) {
my $j = 0;
my $cxcnt = 0;
my $fecnt = 0;
for ($j ; $j<@all_ports1; $j++) {
my $i = $cxcnt % @cx_types;
$cxcnt++;
my $cxt = $cx_types[$i];
if ($cxt eq "l4") {
# Create layer-4 endpoint
my $ep1 = "L4-${num[$ep]}";
# $ep++;
my $ep2 = "D_L4-${num[$ep]}";
$ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
# Add the dummy endpoint
my $cmd = "add_l4_endp $ep2 $shelf $lf1 " . $all_ports1[$j]
. " l4_generic 0 0 0 ' ' ' '";
doCmd($cmd);
$cmd = "set_endp_flag $ep2 unmanaged 1";
doCmd($cmd);
if ($l4_dl_path = "/dev/null") {
$cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " l4_generic 0 $l4_timeout $urls_10m 'dl ${l4_urls[0]} $l4_dl_path' ' '";
}
else {
$cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " l4_generic 0 $l4_timeout $urls_10m 'dl ${l4_urls[0]} $l4_dl_path/$ep1' ' '";
}
doCmd($cmd);
# Now, add the cross-connects
my $cx_name = "L4-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
}# if L4
elsif ($cxt eq "voip") {
}# if VoIP
elsif (($cxt eq "fileIONFS") || ($cxt eq "fileIOCIFS")) {
# Create File-IO endpoint
my $FST = "nfs";
if ($cxt eq "fileIOCIFS") {
$FST = "cifs";
}
my $ep1 = "fe-${num[$fecnt]}";
my $ep2 = "D_$ep1";
$fecnt++;
$ep++;
# $ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
# Add the dummy endpoint
my $cmd = "add_file_endp $ep2 $shelf $lf1 " . $all_ports1[$j]
. " fe_generic $min_rate[$r] $max_rate[$r] $min_rate[$r] $max_rate[$r]"
. " increasing $fio_base/$ep2 $ep2";
doCmd($cmd);
$cmd = "set_endp_flag $ep2 unmanaged 1";
doCmd($cmd);
$cmd = "add_file_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " fe_generic $min_rate[$r] $max_rate[$r] $min_rate[$r] $max_rate[$r]"
. " increasing \'$fio_base/$FST"
. "_$all_ports1[$j]" . $fio_targ_dir . "\' $ep1";
doCmd($cmd);
$cmd = "set_fe_info $ep1 16384 16384 10 1000000 1000000 \'$fio_base/$FST" . "_$all_ports1[$j]"
. $fio_targ_dir . "\' $ep1 $fsrw";
doCmd($cmd);
if ($r < (@min_rate - 1)) {
$r++;
}
else {
$r = 0;
}
# Now, add the cross-connects
my $cx_name = "L4-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
}# elsif FIO
else {
# Create L3 endpoint
my $burst = "NO";
if ($min_rate[$r] != $max_rate[$r]) {
$burst = "YES";
}
my $szrnd = "NO";
if ($min_pkt_szs[$szs] != $max_pkt_szs[$szs]) {
$szrnd = "YES";
}
my $pattern = "increasing";
if ($cx_types[$i] =~ /custom/) {
$pattern = "custom";
}
my $ep1 = "L3e-${num[$ep]}tx";
$ep++;
my $ep2 = "L3e-${num[$ep]}rx";
$ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
my $cmd = "add_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " . $max_pkt_szs[$szs] .
" $pattern NO";
doCmd($cmd);
if ($lf2 ne "") {
# die("Must have lf2 defined if using non-l4 endpoints.");
$cmd = "add_endp $ep2 $shelf $lf2 " . $all_ports2[$j] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " .
$max_pkt_szs[$szs] . " $pattern NO";
}
else {
$cmd = "add_endp $ep2 $shelf $lf1 " . $all_ports1[($j)] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " . $max_pkt_szs[$szs] .
" $pattern NO";
}
doCmd($cmd);
if ($szs < (@min_pkt_szs - 1)) { $szs++; }
else { $szs = 0; }
if ($r < (@min_rate - 1)) { $r++; }
else { $r = 0; }
# Now, add the cross-connects
my $cx_name = "L3-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
}# else L3
}#for all ports
}#one_cx_per_port = 1
else {
my $j = 0;
my $n = 0;
my $fecnt = 0;
for ($j; $j<@all_ports1; $j++) {
for ($i = 0; $i<@cx_types; $i++) {
my $cxt = $cx_types[$i];
if ($cxt eq "l4") {
# Create layer-4 endpoint
for ($n = 0; $n<@l4_urls; $n++) {
my $ep1 = "L4-${num[$ep]}";
# $ep++;
my $ep2 = "D_L4-${num[$ep]}";
$ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
# Add the dummy endpoint
my $cmd = "add_l4_endp $ep2 $shelf $lf1 " . $all_ports1[$j] . " l4_generic 0 0 0 ' ' ' '";
doCmd($cmd);
$cmd = "set_endp_flag $ep2 unmanaged 1";
doCmd($cmd);
if ($l4_dl_path = "/dev/null") {
$cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " l4_generic 0 $l4_timeout $urls_10m 'dl ${l4_urls[$n]} $l4_dl_path' ' '";
}
else {
$cmd = "add_l4_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " l4_generic 0 $l4_timeout $urls_10m 'dl ${l4_urls[$n]} $l4_dl_path/$ep1' ' '";
}
doCmd($cmd);
# Now, add the cross-connects
my $cx_name = "L4-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
} #for url_list
}
elsif ($cxt eq "voip") {
}# if VoIP
elsif (($cxt eq "fileIONFS") || ($cxt eq "fileIOCIFS")) {
# Create File-IO endpoint
my $FST = "nfs";
if ($cxt eq "fileIOCIFS") {
$FST = "cifs";
}
my $ep1 = "fe-${num[$fecnt]}";
my $ep2 = "D_$ep1";
$fecnt++;
$ep++;
# $ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
# Add the dummy endpoint
my $cmd = "add_file_endp $ep2 $shelf $lf1 " . $all_ports1[$j]
. " fe_generic $min_rate[$r] $max_rate[$r] $min_rate[$r] $max_rate[$r]"
. " increasing $fio_base/$ep2 $ep2";
doCmd($cmd);
$cmd = "set_endp_flag $ep2 unmanaged 1";
doCmd($cmd);
$cmd = "add_file_endp $ep1 $shelf $lf1 " . $all_ports1[$j]
. " fe_generic $min_rate[$r] $max_rate[$r] $min_rate[$r] $max_rate[$r]"
. " increasing $fio_base/$FST" . "_$all_ports1[$j]" . $fio_targ_dir . " $ep1";
doCmd($cmd);
$cmd = "set_fe_info $ep1 16384 16384 10 1000000 1000000 $fio_base/$FST"
. "_$all_ports1[$j]" . $fio_targ_dir . " $ep1 $fsrw";
doCmd($cmd);
if ($r < (@min_rate - 1)) { $r++; }
else { $r = 0; }
# Now, add the cross-connects
my $cx_name = "L4-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
}
else {
# Create L3 endpoint
my $burst = "NO";
if ($min_rate[$r] != $max_rate[$r]) {
$burst = "YES";
}
my $szrnd = "NO";
if ($min_pkt_szs[$szs] != $max_pkt_szs[$szs]) {
$szrnd = "YES";
}
my $pattern = "increasing";
if ($cx_types[$i] =~ /custom/) {
$pattern = "custom";
}
my $ep1 = "L3e-${num[$ep]}tx";
$ep++;
my $ep2 = "L3e-${num[$ep]}rx";
$ep++;
@endpoint_names = (@endpoint_names, $ep1, $ep2);
my $cmd = "add_endp $ep1 $shelf $lf1 " . $all_ports1[$j] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " . $max_pkt_szs[$szs] .
" $pattern NO";
doCmd($cmd);
if ($lf2 ne "") {
# die("Must have lf2 defined if using non-l4 endpoints.");
$cmd = "add_endp $ep2 $shelf $lf2 " . $all_ports2[$j] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " .
$max_pkt_szs[$szs] . " $pattern NO";
}
else {
$cmd = "add_endp $ep2 $shelf $lf1 " . $all_ports1[$j+1] . " " . @cx_types[$i] .
" -1 $burst $min_rate[$r] $max_rate[$r] $szrnd " . $min_pkt_szs[$szs] . " " . $max_pkt_szs[$szs] .
" $pattern NO";
}
doCmd($cmd);
if ($szs < (@min_pkt_szs - 1)) { $szs++; }
else { $szs = 0; }
if ($r < (@min_rate - 1)) { $r++; }
else { $r = 0; }
# Now, add the cross-connects
my $cx_name = "L3-${num[$cx]}";
$cmd = "add_cx $cx_name $test_mgr $ep1 $ep2";
doCmd($cmd);
doCmd("set_cx_report_timer $test_mgr $cx_name $report_timer");
$cx++;
@cx_names = (@cx_names, $cx_name);
}
}#for cx types
}#for each port
}##one_cx_per_port = 0
}#addCrossConnects
sub initToDefaults {
# Clean up database if stuff exists
if ($DEBUG) {
print "\nsub initToDefaults\n";
}
doCmd("rm_cx $test_mgr all");
doCmd("rm_endp YES_ALL");
doCmd("rm_test_mgr $test_mgr");
initPortsToDefault();
}#initToDefaults
my $lsb1 = sprintf("%d", $mac1);
my $lsb2 = sprintf("%d", $mac2);
my $lsb3 = sprintf("%d", $mac3);
# Return a unique MAC address using last 3 octets
sub getNextMac {
$lsb1++;
if ($lsb1 > 255) {
$lsb2++;
$lsb1 = 0;
if ($lsb2 > 255) {
$lsb3++;
$lsb2 = 0;
if ($lsb3 > 255) {
print "*** WARNING, MAC address rolling over XX:YY:ZZ:ff:ff:ff ***\n";
$lsb3 = 0;
}
}
}
$mac1 = sprintf("%02x", $lsb1);
$mac2 = sprintf("%02x", $lsb2);
$mac3 = sprintf("%02x", $lsb3);
return "$mac3:$mac2:$mac1";
} # getNextMac
sub addMacVlans {
if ($DEBUG) {
print "\nsub addMacVlans\n";
}
if ($mac_init == 1 ) {
$lsb1 = sprintf("%d", $mac1);
$lsb2 = sprintf("%d", $mac2);
$lsb3 = sprintf("%d", $mac3);
}
my $i;
my $q;
my $pnum1;
my $pnum2;
my $throttle = $script_speed;
my $since_throttle = 0;
for ($i = $start_mvlan; $i<($num_mvlans + $start_mvlan); $i++) {
for ($q = 0; $q<@lf1_ports; $q++) {
$pnum1 = $lf1_ports[$q];
my $shlf = sprintf("%02x", $shelf);
my $card = sprintf("%02x", $lf1);
my $mac_index = getNextMac();
my $mac_addr = "00:$shlf:$card:$mac_index";
doCmd("add_mvlan $shelf $lf1 $pnum1 $mac_addr $i");
$pnum2 = $lf2_ports[$q];
if ($pnum2 ne "") {
$card = sprintf("%02x", $lf2);
$mac_index = getNextMac();
$mac_addr = "00:$shlf:$card:$mac_index";
doCmd("add_mvlan $shelf $lf2 $pnum2 $mac_addr $i");
}
if ($DEBUG > 1) { sleep($D_PAUSE); }
# Throttle ourself so we don't over-run the poor LANforge system.
if ($since_throttle++ > $throttle) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf1, $pnum1);
if ($pnum2 ne "") {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf2, $pnum2);
}
$since_throttle = 0;
}
}
}
doCmd("probe_ports");
# Wait until we discover all the ports...
for ($q = 0; $q<@lf1_ports; $q++) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf1, $lf1_ports[$q]);
my $pname = $p1->{dev};
my $p2 = new LANforge::Port();
my $pname2;
if ($pnum2 ne "") {
$utils->updatePort($p2, $shelf, $lf2, $lf2_ports[$q]);
$pname2 = $p2->{dev};
}
for ($i = $start_mvlan; $i<($num_mvlans + $start_mvlan); $i++) {
while (1) {
$utils->updatePort($p1, $shelf, $lf1, "$pname\#$i");
if ($pnum2 ne "") {
$utils->updatePort($p2, $shelf, $lf2, "$pname2\#$i");
}
if ($p1->isPhantom() || (($pnum2 ne "") && $p2->isPhantom())) {
sleep(1);
}
else {
last;
}
}
}
}
}#addMacVlans
# Wait until the system can update a port..
sub throttleCard {
my $s = shift;
my $c = shift;
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $s, $c, 1);
}#throttle
sub initPortsToDefault {
clearMacVlanPorts($shelf, $lf1);
if ($lf2orig ne "") {
clearMacVlanPorts($shelf, $lf2);
}
throttleCard($shelf, $lf1);
if ($lf2orig ne "") {
throttleCard($shelf, $lf2);
}
# Set all ports we are messing with to known state.
my $i = 0;
for ($i = 0; $i<@lf1_ports; $i++) {
my $tmp = $lf1_ports[$i];
my $tmp2 = $lf2_ports[$i];
if ($tmp ne "0") {
doCmd("set_port $shelf $lf1 $tmp 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA");
}
if ($lf2orig ne "") {
if ($tmp2 ne "0") {
doCmd("set_port $shelf $lf2 $tmp2 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA");
}
}
}
}
sub clearMacVlanPorts {
my $s = shift;
my $c = shift;
my $i;
my $found_one = 1;
my @ports = ();
while ($found_one) {
$found_one = 0;
doCmd("probe_ports");
# Clear out any existing MAC-VLAN ports.
$utils->error("");
@ports = $utils->getPortListing($s, $c);
my $mx = @ports;
print "Found $mx ports for resource: $shelf.$lf1\n";
if (($mx == 0) || ($utils->error() =~ /Timed out/g)) {
# System is too backlogged to answer, wait a bit
print " Will try listing ports again in a few seconds...system is backlogged now!\n";
sleep(5);
$found_one = 1;
next;
}
my $throttle = 0;
for ($i = 0; $i<$mx; $i++) {
if ($ports[$i]->isMacVlan()) {
doCmd($ports[$i]->getDeleteCmd());
$found_one = 1;
}
}
}
}
sub initIpAddresses {
# Set all ports we are messing with to known state.
my $i;
# TODO: This loop needs to only loop for the number of "real"/necessary ports
# because lf1_ports is faked by num_cxs when num_mvlans is 0 and slows the
# script down.
for ($i = 0; $i<@lf1_ports; $i++) {
# for ($i = 0; $i<(@lf1orig_ports + @lf2orig_ports); $i++) {
# if ($ip_lsb[$i] > 250) {
# $ip_c[$i]++;
# $ip_lsb[$i] = 2;
# }
# TODO: The whole assignment of IPs to physical ports need to be encapsulated in
# a loop, much like the MACVLANs...
my $ptmp = $lf1_ports[$i];
my $ptmp2 = $lf2_ports[$i];
my $cmd = "";
if (!$ignore_phys_ports) {
# $cmd = "set_port $shelf $lf1 $ptmp 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA";
# $cmd = "set_port $shelf $lf1 $ptmp " .
# "$ip_base[$i].$ip_c[$i].$ip_lsb[$i] $msk[$i] " .
# "$ip_gw[$i] NA NA NA";
if ($ptmp ne "") {
# doCmd($cmd);
}
if ($ptmp2 ne "") {
# $cmd = "set_port $shelf $lf2 $ptmp2 0.0.0.0 0.0.0.0 0.0.0.0 NA NA NA";
# $cmd = "set_port $shelf $lf2 $ptmp2 " .
# "$ip_base[$i+1].$ip_c[$i+1].$ip_lsb[$i+1] $msk[$i+1] " .
# "$ip_gw[$i+1] NA NA NA";
# doCmd($cmd);
}
}
# END TODO
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf1, $ptmp);
my $pname = $p1->{dev};
my $q;
my $throttle = $script_speed;
my $since_throttle = 0;
for ($q = $start_mvlan; $q<($num_mvlans + $start_mvlan); $q++) {
$cmd = "set_port $shelf $lf1 $pname\#$q " .
"$ip_base[$i].$ip_c[$i].$ip_lsb[$i] $msk[$i] " .
"$ip_gw[$i] NA NA NA";
doCmd($cmd);
$ip_lsb[$i]++;
if ($ip_lsb[$i] > 250) {
$ip_c[$i]++;
$ip_lsb[$i] = 2;
}
if ($since_throttle++ > $throttle) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf1, "$pname\#$q");
$since_throttle = 0;
}
}
if ($ptmp2 ne "") {
$p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf2, $ptmp2);
$pname = $p1->{dev};
for ($q = $start_mvlan; $q<($num_mvlans + $start_mvlan); $q++) {
if (@ip_base == 1) {
$cmd = "set_port $shelf $lf2 $pname\#$q " .
"$ip_base[$i].$ip_c[$i].$ip_lsb[$i] $msk[$i] " .
"$ip_gw[$i] NA NA NA";
doCmd($cmd);
$ip_lsb[$i]++;
if ($ip_lsb[$i] > 250) {
$ip_c[$i]++;
$ip_lsb[$i] = 2;
}
}
else {
$cmd = "set_port $shelf $lf2 $pname\#$q " .
"$ip_base[$i+1].$ip_c[$i+1].$ip_lsb[$i+1] $msk[$i+1] " .
"$ip_gw[$i+1] NA NA NA";
doCmd($cmd);
$ip_lsb[$i+1]++;
if ($ip_lsb[$i+1] > 250) {
$ip_c[$i+1]++;
$ip_lsb[$i+1] = 2;
}
}
if ($since_throttle++ > $throttle) {
my $p1 = new LANforge::Port();
$utils->updatePort($p1, $shelf, $lf2, "$pname\#$q");
$since_throttle = 0;
}
} # for $q
} # if we have an lf2_ports defined
}
}
sub doCmd {
my $cmd = shift;
if ($cmd) {
print ">>> $cmd\n";
$t->print($cmd);
my @rslt = $t->waitfor('/ \>\>RSLT:(.*)/');
print "**************\n @rslt ................\n\n";
} else {
print "\n***** doCmd (): NULL COMMAND !!! *****";
print "\n$cmd\n\n";
exit (1);
}
#sleep(1);
}
sub getDate {
my $date = `date`;
chomp($date);
return $date
}
sub printArgs {
print
"\n$script_name"
. "\nModified arguments:"
. "\ninit: $INIT"
. "\nmanager: $lfmgr_host\n"
. "\nlf1: $lf1\nlf2: $lf2\n"
. "\nlf1_ports: " . join(" ", @lf1_ports)
. "\nlf2_ports: " . join(" ", @lf2_ports) . "\n"
. "\nstart_macvlans: $start_mvlan"
. "\nnum_mvlans: $num_mvlans"
. "\nmvl: $mvl\n"
. "\nmin_rates: " . join(" ", @min_rate)
. "\nmax_rates: " . join(" ", @max_rate)
. "\nmin_pkt_sizes: " . join(" ", @min_pkt_szs)
. "\nmax_pkt_sizes: " . join(" ", @max_pkt_szs) . "\n"
. "\ncx_types: " . join(" ", @cx_types)
. "\none_cx_per_port: $one_cx_per_port\n\n"
. "\n"
. "Available CX types: " . join(", ", @cxts) . "\n"
. "Total of each CX type: " . join(", ", @t_cxts) . "\n"
. "Total number of ports: $t_ports\n"
. "Total number of urls: " . scalar(@l4_urls) . "\n"
. "Total number of endpoints and CXs: $t_num\n"
. "\n\n";
}
sub printMark {
print
"\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*"
."\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n*\n";
}
sub printHelp {
print
"\n$script_name\n"
. "USAGE: mgr=[ip-of-mgr] speed=[25|n] wait=[0|n] DEBUG=[0|1|2|...] D_PAUSE=[3|n]\n"
. " config_once=[0|1] init=[0|1] init_net=[1|0] init_tests=[1|0]\n"
. " test_mgr=\"ben_tm\" first_run=[1|0]\n"
. " first_name_id=[0|n] id_len=[0|n]\n"
. " create_only=[0|1] one_cx_per_port=[0|1] ignore_phy_ports=[1|0]\n"
. " lf1=[1|n] lf2=[none|n=!lf1]\n"
. " lf1_ports=[\"1 2 3\"|\"eth2 eth3\"] lf2_ports=[\"4 5 6\"|\"eth4 eth5\"]\n"
. " start_mvl=[0|n] num_mvl=[9|0]\n"
. " if (num_mvl=0) num_cxs_per_port=[10|n]\n"
. " mac3=0xf0 mac2=0xbe mac1=0xef\n"
. " ip_base= \"192.168 172.16\"\n"
. " ip_c = \"2 1\"\n"
. " ip_lsb = \"2 2\"\n"
. " ip_msk =\"255.255.0.0 255.255.0.0\"\n"
. " ip_gw =\"192.168.2.1 172.16.1.1\"\n"
. " cx_types=\"lf lf_udp lf_tcp custom_udp custom_tcp l4 fileIONFS fileIOCIFS\"\n"
. " min_rates=\"9600 56000 128000\" max_rates=\"56000 128000 25600\"\n"
. " min_pkt_sizes=\"500 500 500\" max_pkt_sizes=\"1000 1000 1000\"\n"
. " url_rate=100 l4_wait=10000\n"
. " urls=\"http://www.candelatech.com/file ftp://www.candelatech.com/file https://www.candelatech.com/file\"\n"
. " fsrw=[read|write] fio_targ_dir=tmp/ fio_base=/mnt/fio_base\n"
. "\n";
}
sub handleCmdLineArg {
my $arg = $_[0];
my $val = $_[1];
if ($arg eq "help" || $arg eq "--help" || $arg eq "-h" || $arg eq "-help" || $arg eq "-h" ) {
printHelp();
exit(0);
}
elsif ($arg eq "debug" || $arg eq "DEBUG") {
$DEBUG = $val;
}
elsif ($arg eq "d_pause" || $arg eq "D_PAUSE") {
$D_PAUSE = $val;
}
elsif ($arg eq "mgr") {
$lfmgr_host = $val;
}
elsif ($arg eq "test_mgr") {
$test_mgr = $val;
}
elsif ($arg eq "init") {
$INIT = $val;
}
elsif ($arg eq "config_once") {
$init_once = $val;
}
elsif ($arg eq "init_net") {
$init_net = $val;
}
elsif ($arg eq "init_tests") {
$init_tests = $val;
}
elsif ($arg eq "first_run") {
$first_run = $val;
}
elsif ($arg eq "first_name_id") {
$name_id = $val;
}
elsif ($arg eq "id_len") {
$name_id_len = $val;
if (length($name_id) > $name_id_len) {
print "\nWARNING: id_len specifies a string length less that first_name_id.\n";
}
}
elsif ($arg eq "speed") {
$script_speed = $val;
}
elsif ($arg eq "wait") {
$pause = $val;
}
elsif ($arg eq "lf1") {
$lf1 = $val;
}
elsif ($arg eq "lf2") {
$lf2 = $val;
if ($lf1 == $lf2) {
die("\nINVALID: First and second resource are the same !!!\n\n");
}
}
elsif ($arg eq "mac3") {
$mac3 = $val;
}
elsif ($arg eq "mac2") {
$mac2 = $val;
}
elsif ($arg eq "mac1") {
$mac1 = $val;
}
elsif ($arg eq "ip_base") {
@ip_base = undef;
@ip_base = split(/ /, $val);
}
elsif ($arg eq "ip_c") {
@ip_c = undef;
@ip_c = split(/ /, $val);
}
elsif ($arg eq "ip_lsb") {
@ip_lsb = undef;
@ip_lsb = split(/ /, $val);
}
elsif ($arg eq "ip_msk") {
@msk = undef;
@msk = split(/ /, $val);
}
elsif ($arg eq "ip_gw") {
@ip_gw = undef;
@ip_gw = split(/ /, $val);
}
elsif ($arg eq "lf1_ports") {
@lf1_ports = split(/ /, $val);
}
elsif ($arg eq "lf2_ports") {
if ($lf2 == "" || $lf1 == $lf2) {
die("\nINVALID: Either second resource is not defined\nor first and second resource are the same !!!\n\n");
}
else {
@lf2_ports = split(/ /, $val);
}
}
elsif ($arg eq "cx_types") {
@cx_types = split(/ /, $val);
}
elsif ($arg eq "min_pkt_sizes") {
@min_pkt_szs = split(/ /, $val);
}
elsif ($arg eq "max_pkt_sizes") {
@max_pkt_szs = split(/ /, $val);
}
elsif ($arg eq "start_mvl") {
$start_mvlan = $val;
}
elsif ($arg eq "num_mvl") {
$num_mvlans = $val;
}
elsif ($arg eq "num_cxs_per_port") {
$num_cxs = $val;
}
elsif ($arg eq "min_rates") {
@min_rate = split(/ /, $val);
}
elsif ($arg eq "max_rates") {
@max_rate = split(/ /, $val);
}
elsif ($arg eq "fsrw") {
$fsrw = $val;
}
elsif ($arg eq "fio_base") {
$fio_base = $val;
}
elsif ($arg eq "fio_targ_dir") {
$fio_targ_dir = $val;
}
elsif ($arg eq "urls") {
@l4_urls = split(/ /, $val);
}
elsif ($arg eq "url_rate") {
$urls_10m = $val;
}
elsif ($arg eq "l4_wait") {
$l4_timeout = $val;
}
elsif ($arg eq "one_cx_per_port") {
$one_cx_per_port = $val;
}
elsif ($arg eq "ignore_phy_ports") {
$ignore_phys_ports = $val;
}
elsif ($arg eq "create_only") {
$create_only = $val;
}
else {
print "\n\nCould not parse one or more of the arguments !!!\n"
. "First rejected argument: $arg\n";
printHelp();
exit(1);
}
}
Reference in New Issue View Git Blame Copy Permalink