mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-10-31 02:38:03 +00:00
54 lines
3.8 KiB
Python
54 lines
3.8 KiB
Python
# Flags for the add_sta command
|
|
add_sta_flags = {
|
|
"wpa_enable" : 0x10, # Enable WPA
|
|
"custom_conf" : 0x20, # Use Custom wpa_supplicant config file.
|
|
"wep_enable" : 0x200, # Use wpa_supplicant configured for WEP encryption.
|
|
"wpa2_enable" : 0x400, # Use wpa_supplicant configured for WPA2 encryption.
|
|
"ht40_disable" : 0x800, # Disable HT-40 even if hardware and AP support it.
|
|
"scan_ssid" : 0x1000, # Enable SCAN-SSID flag in wpa_supplicant.
|
|
"passive_scan" : 0x2000, # Use passive scanning (don't send probe requests).
|
|
"disable_sgi" : 0x4000, # Disable SGI (Short Guard Interval).
|
|
"lf_sta_migrate" : 0x8000, # OK-To-Migrate (Allow station migration between LANforge radios)
|
|
"verbose" : 0x10000, # Verbose-Debug: Increase debug info in wpa-supplicant and hostapd logs.
|
|
"80211u_enable" : 0x20000, # Enable 802.11u (Interworking) feature.
|
|
"80211u_auto" : 0x40000, # Enable 802.11u (Interworking) Auto-internetworking feature. Always enabled currently.
|
|
"80211u_gw" : 0x80000, # AP Provides access to internet (802.11u Interworking)
|
|
"80211u_additional" : 0x100000, # AP requires additional step for access (802.11u Interworking)
|
|
"80211u_e911" : 0x200000, # AP claims emergency services reachable (802.11u Interworking)
|
|
"80211u_e911_unauth" : 0x400000, # AP provides Unauthenticated emergency services (802.11u Interworking)
|
|
"hs20_enable" : 0x800000, # Enable Hotspot 2.0 (HS20) feature. Requires WPA-2.
|
|
"disable_gdaf" : 0x1000000, # AP: Disable DGAF (used by HotSpot 2.0).
|
|
"8021x_radius" : 0x2000000, # Use 802.1x (RADIUS for AP).
|
|
"80211r_pmska_cache" : 0x4000000, # Enable oportunistic PMSKA caching for WPA2 (Related to 802.11r).
|
|
"disable_ht80" : 0x8000000, # Disable HT80 (for AC chipset NICs only)
|
|
"ibss_mode" : 0x20000000, # Station should be in IBSS mode.
|
|
"osen_enable" : 0x40000000, # Enable OSEN protocol (OSU Server-only Authentication)
|
|
"disable_roam" : 0x80000000, # Disable automatic station roaming based on scan results.
|
|
"ht160_enable" : 0x100000000, # Enable HT160 mode.
|
|
"disable_fast_reauth" : 0x200000000, # Disable fast_reauth option for virtual stations.
|
|
"mesh_mode" : 0x400000000, # Station should be in MESH mode.
|
|
"power_save_enable" : 0x800000000, # Station should enable power-save. May not work in all drivers/configurations.
|
|
"create_admin_down" : 0x1000000000, # Station should be created admin-down.
|
|
"wds-mode" : 0x2000000000, # WDS station (sort of like a lame mesh), not supported on ath10k
|
|
"no-supp-op-class-ie" : 0x4000000000, # Do not include supported-oper-class-IE in assoc requests. May work around AP bugs.
|
|
"txo-enable" : 0x8000000000, # Enable/disable tx-offloads, typically managed by set_wifi_txo command
|
|
"use-wpa3" : 0x10000000000, # Enable WPA-3 (SAE Personal) mode.
|
|
}
|
|
add_sta_modes = {
|
|
"AUTO" : 0, # 802.11g
|
|
"802.11a" : 1, # 802.11a
|
|
"b" : 2, # 802.11b
|
|
"g" : 3, # 802.11g
|
|
"abg" : 4, # 802.11abg
|
|
"abgn" : 5, # 802.11abgn
|
|
"bgn" : 6, # 802.11bgn
|
|
"bg" : 7, # 802.11bg
|
|
"abgnAC" : 8, # 802.11abgn-AC
|
|
"anAC" : 9, # 802.11an-AC
|
|
"an" : 10, # 802.11an
|
|
"bgnAC" : 11, # 802.11bgn-AC
|
|
"abgnAX" : 12, # 802.11abgn-AX, a/b/g/n/AC/AX (dual-band AX) support
|
|
"bgnAX" : 13, # 802.11bgn-AX
|
|
"anAX" : 14, # 802.11an-AX
|
|
}
|