mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-10-31 02:38:03 +00:00
100 lines
6.3 KiB
Python
100 lines
6.3 KiB
Python
set_port_current_flags = {
|
|
"if_down": 0x1, # Interface Down
|
|
"fixed_10bt_hd": 0x2, # Fixed-10bt-HD (half duplex)
|
|
"fixed_10bt_fd": 0x4, # Fixed-10bt-FD
|
|
"fixed_100bt_hd": 0x8, # Fixed-100bt-HD
|
|
"fixed_100bt_fd": 0x10, # Fixed-100bt-FD
|
|
"auto_neg": 0x100, # auto-negotiate
|
|
"adv_10bt_hd": 0x100000, # advert-10bt-HD
|
|
"adv_10bt_fd": 0x200000, # advert-10bt-FD
|
|
"adv_100bt_hd": 0x400000, # advert-100bt-HD
|
|
"adv_100bt_fd": 0x800000, # advert-100bt-FD
|
|
"adv_flow_ctl": 0x8000000, # advert-flow-control
|
|
"promisc": 0x10000000, # PROMISC
|
|
"use_dhcp": 0x80000000, # USE-DHCP
|
|
"adv_10g_hd": 0x400000000, # advert-10G-HD
|
|
"adv_10g_fd": 0x800000000, # advert-10G-FD
|
|
"tso_enabled": 0x1000000000, # TSO-Enabled
|
|
"lro_enabled": 0x2000000000, # LRO-Enabled
|
|
"gro_enabled": 0x4000000000, # GRO-Enabled
|
|
"ufo_enabled": 0x8000000000, # UFO-Enabled
|
|
"gso_enabled": 0x10000000000, # GSO-Enabled
|
|
"use_dhcpv6": 0x20000000000, # USE-DHCPv6
|
|
"rxfcs": 0x40000000000, # RXFCS
|
|
"no_dhcp_rel": 0x80000000000, # No-DHCP-Release
|
|
"staged_ifup": 0x100000000000, # Staged-IFUP
|
|
"http_enabled": 0x200000000000, # Enable HTTP (nginx) service for this port.
|
|
"ftp_enabled": 0x400000000000, # Enable FTP (vsftpd) service for this port.
|
|
"aux_mgt": 0x800000000000, # Enable Auxillary-Management flag for this port.
|
|
"no_dhcp_restart": 0x1000000000000, # Disable restart of DHCP on link connect (ie, wifi).
|
|
# This should usually be enabled when testing wifi
|
|
# roaming so that the wifi station can roam
|
|
# without having to re-acquire a DHCP lease each
|
|
# time it roams.
|
|
"ignore_dhcp": 0x2000000000000, # Don't set DHCP acquired IP on interface,
|
|
# instead print CLI text message. May be useful
|
|
# in certain wifi-bridging scenarios where external
|
|
# traffic-generator cannot directly support DHCP.
|
|
|
|
"no_ifup_post": 0x4000000000000, # Skip ifup-post script if we can detect that we
|
|
# have roamed. Roaming is considered true if
|
|
# the IPv4 address has not changed.
|
|
|
|
"radius_enabled": 0x20000000000000, # Enable RADIUS service (using hostapd as radius server)
|
|
"ipsec_client": 0x40000000000000, # Enable client IPSEC xfrm on this port.
|
|
"ipsec_concentrator": 0x80000000000000, # Enable concentrator (upstream) IPSEC xfrm on this port.
|
|
"service_dns": 0x100000000000000, # Enable DNS (dnsmasq) service on this port.
|
|
}
|
|
set_port_cmd_flags = {
|
|
"reset_transceiver": 0x1, # Reset transciever
|
|
"restart_link_neg": 0x2, # Restart link negotiation
|
|
"force_MII_probe": 0x4, # Force MII probe
|
|
"no_hw_probe": 0x8, # Don't probe hardware
|
|
"probe_wifi": 0x10, # Probe WIFI
|
|
"new_gw_probe": 0x20, # Force new GW probe
|
|
"new_gw_probe_dev": 0x40, # Force new GW probe for ONLY this interface
|
|
"from_user": 0x80, # from_user (Required to change Mgt Port config
|
|
# (IP, DHCP, etc)
|
|
"skip_port_bounce": 0x100, # skip-port-bounce (Don't ifdown/up
|
|
# interface if possible.)
|
|
"from_dhcp": 0x200, # Settings come from DHCP client.
|
|
"abort_if_scripts": 0x400, # Forceably abort all ifup/down scripts on this Port.
|
|
"use_pre_ifdown": 0x800, # Call pre-ifdown script before bringing interface down.
|
|
}
|
|
set_port_interest_flags = {
|
|
"command_flags" : 0x1, # apply command flags
|
|
"current_flags" : 0x2, # apply current flags
|
|
"ip_address" : 0x4, # IP address
|
|
"ip_Mask" : 0x8, # IP mask
|
|
"ip_gateway" : 0x10, # IP gateway
|
|
"mac_address" : 0x20, # MAC address
|
|
"supported_flags" : 0x40, # apply supported flags
|
|
"link_speed" : 0x80, # Link speed
|
|
"mtu" : 0x100, # MTU
|
|
"tx_queue_length" : 0x200, # TX Queue Length
|
|
"promisc_mode" : 0x400, # PROMISC mode
|
|
"interal_use_1" : 0x800, # (INTERNAL USE)
|
|
"alias" : 0x1000, # Port alias
|
|
"rx_all" : 0x2000, # Rx-ALL
|
|
"dhcp" : 0x4000, # including client-id.
|
|
"rpt_timer" : 0x8000, # Report Timer
|
|
"bridge" : 0x10000, # BRIDGE
|
|
"ipv6_addrs" : 0x20000, # IPv6 Address
|
|
"bypass" : 0x40000, # Bypass
|
|
"gen_offload" : 0x80000, # Generic offload flags, everything but LRO
|
|
"cpu_mask" : 0x100000, # CPU Mask, useful for pinning process to CPU core
|
|
"lro_offload" : 0x200000, # LRO (Must be disabled when used in Wanlink,
|
|
# and probably in routers)
|
|
|
|
"sta_br_id" : 0x400000, # WiFi Bridge identifier. 0 means no bridging.
|
|
"ifdown" : 0x800000, # Down interface
|
|
"dhcpv6" : 0x1000000, # Use DHCPv6
|
|
"rxfcs" : 0x2000000, # RXFCS
|
|
"dhcp_rls" : 0x4000000, # DHCP release
|
|
"svc_httpd" : 0x8000000, # Enable/disable HTTP Service for a port
|
|
"svc_ftpd" : 0x10000000, # Enable/disable FTP Service for a port
|
|
"aux_mgt" : 0x20000000, # Enable/disable Auxillary-Management for a port
|
|
"no_dhcp_conn" : 0x40000000, # Enable/disable NO-DHCP-ON-CONNECT flag for a port
|
|
"no_apply_dhcp" : 0x80000000, # Enable/disable NO-APPLY-DHCP flag for a port
|
|
"skip_ifup_roam" : 0x100000000, # Enable/disable SKIP-IFUP-ON-ROAM flag for a port
|
|
} |