mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-10-31 18:58:01 +00:00
1815 lines
105 KiB
Python
Executable File
1815 lines
105 KiB
Python
Executable File
#!/usr/bin/python3
|
||
'''
|
||
LANforge 192.168.100.178
|
||
Controller at 192.168.100.112 admin/Cisco123
|
||
Controller is 192.1.0.10
|
||
AP is 192.1.0.2'''
|
||
|
||
EPILOG = '''\
|
||
make sure pexpect is installed:
|
||
$ sudo yum install python3-pexpect
|
||
$ sudo yum install python3-xlsxwriter
|
||
|
||
You might need to install pexpect-serial using pip:
|
||
$ pip3 install pexpect-serial
|
||
$ pip3 install XlsxWriter
|
||
|
||
This script will automatically create and start a layer-3 UDP connection between the
|
||
configured upstream port and station.
|
||
|
||
The user also has the option of setting up the station oustide of this script, however.
|
||
|
||
# Examples:
|
||
# See cisco_power_results.txt when complete.
|
||
# See cisco_power_results.xlsx when complete.
|
||
NOTE: Telnet port 23 unless specified , ssh port 22 unless specified, scheme defaults to ssh
|
||
|
||
##########################################
|
||
# send email and or text on --exit_on_fail
|
||
##########################################
|
||
./lf_cisco_power.py -d 192.168.100.112 -u admin -p Cisco123 -s ssh --port 22 -a APA453.0E7B.CF9C --lfmgr 192.168.100.178
|
||
--bandwidth "80" --channel "144" --nss 4 --txpower "1" --pathloss 51 --antenna_gain 10 --lfmgr 192.168.100.178 --band a
|
||
--upstream_port eth3 --outfile cisco_power_results --create_station sta0001 --radio wiphy1 --ssid test_candela --ssidpw [BLANK] --security open
|
||
-l out_file2 -D 14 --exit_on_fail
|
||
--email "user==lanforgetest@gmail.com passwd==lanforge123 to==2082868321@vtext.com smtp==smtp.gmail.com port==465"
|
||
--email "user==lanforgetest@gmail.com passwd==lanforge123 to==lanforgetest@gmail.com smtp==smtp.gmail.com port==465"
|
||
|
||
####################
|
||
# Long duration test
|
||
####################
|
||
./lf_cisco_power.py -d 172.19.36.168 -u admin -p Wnbulab@123 --port 23 --scheme telnet --ap "APA453.0E7B.CF60" \
|
||
--bandwidth "20 40 80" --channel "36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165" \
|
||
--nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 54 --antenna_gain 6 --band a --upstream_port eth2 --series 9800 \
|
||
--wlan open-wlan --wlanID 1 --create_station sta0001 --radio wiphy1 --ssid open-wlan --ssidpw [BLANK] --security open \
|
||
--outfile cisco_power_results_60_chan_ALL --cleanup --slot 1 --verbose
|
||
|
||
|
||
###############################################
|
||
# Per-channel path-loss example station present
|
||
###############################################
|
||
./lf_cisco_power.py -d 192.168.100.112 -u admin -p Cisco123 -s ssh --port 22 -a VC --lfmgr 192.168.100.178 \
|
||
--station sta00000 --bandwidth "20 40 80 160" --channel "36:64 149:60" --antenna_gain 5 --nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 64 \
|
||
--band a --upstream_port eth2 --lfresource2 2 --verbose
|
||
|
||
###############################################################
|
||
# To create a station run test against station create open-wlan
|
||
# #############################################################
|
||
./lf_cisco_power.py -d <router IP> -u admin -p Cisco123 -port 23 --scheme telnet --ap AP6C71.0DE6.45D0 \
|
||
--station sta2222 --bandwidth "20" --channel "36" --nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 54 --antenna_gain 6 --band a \
|
||
--upstream_port eth2 --series 9800 --wlan open-wlan --wlanID 1 --create_station sta2222 --radio wiphy1 --ssid open-wlan \
|
||
--ssidpw [BLANK] --security open --verbose
|
||
|
||
#########################
|
||
# station already present
|
||
#########################
|
||
./lf_cisco_power.py -d <router IP> -u admin -p Cisco123 -port 23 --scheme telnet --ap AP6C71.0DE6.45D0 \
|
||
--station sta0000 --bandwidth "20" --channel "36" --nss 4 --txpower "1 2 3 4 5 6 7 8" --pathloss 64 --antenna_gain 5 --band a \
|
||
--upstream_port eth2 --series 9800 --wlan open-wlan --wlanID 1 --verbose
|
||
|
||
|
||
######################
|
||
# to create a station
|
||
######################
|
||
./lf_associate_ap.pl --radio wiphy1 --ssid open-wlan --passphrase [BLANK] ssecurity open --upstream eth1 \
|
||
--first_ip DHCP --first_sta sta0001 --duration 5 --cxtype udp
|
||
|
||
|
||
Changing regulatory domain should happen outside of this script. See cisco_ap_ctl.py
|
||
|
||
|
||
####################################################################################
|
||
If wish to send Text after test completion follow the email format based on carrier
|
||
####################################################################################
|
||
Text message via email:
|
||
|
||
T-Mobile – number@tmomail.net
|
||
Virgin Mobile – number@vmobl.com
|
||
AT&T – number@txt.att.net
|
||
Sprint – number@messaging.sprintpcs.com
|
||
Verizon – number@vtext.com
|
||
Tracfone – number@mmst5.tracfone.com
|
||
Ting – number@message.ting.com
|
||
Boost Mobile – number@myboostmobile.com
|
||
U.S. Cellular – number@email.uscc.net
|
||
Metro PCS – number@mymetropcs.com
|
||
|
||
'''
|
||
|
||
# TODO: Maybe HTML output too?
|
||
# TODO: Allow selecting tabs or commas for output files
|
||
|
||
import sys
|
||
if sys.version_info[0] != 3:
|
||
print("This script requires Python 3")
|
||
exit()
|
||
|
||
import re
|
||
import logging
|
||
import time
|
||
from time import sleep
|
||
import argparse
|
||
import subprocess
|
||
import xlsxwriter
|
||
import math
|
||
|
||
NL = "\n"
|
||
CR = "\r\n"
|
||
Q = '"'
|
||
A = "'"
|
||
FORMAT = '%(asctime)s %(name)s %(levelname)s: %(message)s'
|
||
|
||
lfmgr = "127.0.0.1"
|
||
lfstation = "sta00000"
|
||
lfresource = "1"
|
||
lfresource2 = "1"
|
||
outfile = "cisco_power_results.txt"
|
||
full_outfile = "cisco_power_results_full.txt"
|
||
outfile_xlsx = "cisco_power_results.xlsx"
|
||
upstream_port = "eth1"
|
||
pf_dbm = 6
|
||
# Allow one chain to have a lower signal, since customer's DUT has
|
||
# lower tx-power on one chain when doing high MCS at 4x4.
|
||
pf_a4_dropoff = 3
|
||
|
||
# This below is only used when --adjust_nf is used.
|
||
# Noise floor on ch 36 where we calibrated -54 path loss (based on hard-coded -95 noise-floor in driver)
|
||
nf_at_calibration = -105
|
||
# older ath10k driver hard-codes noise-floor to -95 when calculating RSSI
|
||
# RSSI = NF + reported_power
|
||
# Shift RSSI by difference in actual vs calibrated noise-floor since driver hard-codes
|
||
# the noise floor.
|
||
|
||
# rssi_adjust = (current_nf - nf_at_calibration)
|
||
|
||
def usage():
|
||
print("$0 used connect to controller:")
|
||
print("-d|--dest: destination host")
|
||
print("-o|--port: destination port")
|
||
print("-u|--user: login name")
|
||
print("-p|--passwd: password")
|
||
print("-s|--scheme (serial|telnet|ssh): connect via serial, ssh or telnet")
|
||
print("-t|--tty tty serial device")
|
||
print("-l|--log file: log messages here ,stdout means output to console")
|
||
print("-a|--ap select AP")
|
||
print("-b|--bandwidth: List of bandwidths to test: 20 40 80 160")
|
||
print("-c|--channel: List of channels, with optional path-loss to test: 36:64 100:60")
|
||
print("-n|--nss: List of spatial streams to test: 1 2 3 4")
|
||
print("-T|--txpower: List of TX power values to test: 1 2 3 4 5 6 7 8")
|
||
print("-k|--keep_state keep the state, no configuration change at the end of the test, store true flage present ")
|
||
print("--station: LANforge station name for test(sta00000), use if station present and --create_station not used")
|
||
print("--upstream_port: LANforge upstream port name (eth1)")
|
||
print("--lfmgr: LANforge manager IP address")
|
||
print("--lfresource: LANforge resource ID for station")
|
||
print("--lfresource2: LANforge resource ID for upstream port")
|
||
print("--outfile: Output file for txt and xlsx data")
|
||
print("--pathloss: Calculated path-loss between LANforge station and AP")
|
||
print("--antenna_gain: Antenna gain for AP , since no Antenna in cabled connection between AP and lanforge , antenna gain needs to be taken into account")
|
||
print("--band: Select band (a | b | abgn), a means 5Ghz, b means 2.4, abgn means 2.4 on dual-band AP")
|
||
print("--pf_dbm: Pass/Fail range, default is 6")
|
||
print("--pf_a4_dropoff: Allow one chain to use lower tx-power and still pass when doing 4x4. Default is 3")
|
||
print("--wait_forever: Wait forever for station to associate, may aid debugging if STA cannot associate properly")
|
||
print("--adjust_nf: Adjust RSSI based on noise-floor. ath10k without the use-real-noise-floor fix needs this option")
|
||
print("--wlan: for 9800, wlan identifier defaults to wlan-open")
|
||
print("--wlanID: wlanID for 9800 , defaults to 1")
|
||
print("--series: controller series 9800 , defaults to 3504")
|
||
print("--slot: 9800 AP slot defaults to 1")
|
||
print("--create_station", "create LANforge station at the beginning of the test")
|
||
print("--radio" ,"radio to create LANforge station on at the beginning of the test")
|
||
print("--ssid", "ssid default open-wlan")
|
||
print("--ssidpw", "ssidpw default [BLANK]")
|
||
print("--security", "security default open")
|
||
print("--cleanup", "Clean up all stations after test completes, only need switch for True, Defaults False")
|
||
print("--vht160", "Enables VHT160 in lanforge, only need switch for True, Defaults False")
|
||
print("--cap_ctl_out","switch present will have cap_ctl_out logging, only need switch for True, Defaults False")
|
||
print("--exit_on_fail","--exit_on_fail, exit on test failure")
|
||
print("--exit_on_error","--exit_on_error, exit on test error, test mechanics failed")
|
||
print('-e','--email', "--email user==<from email> passwd==<email password> to==<to email> smtp==<smtp server> port==<smtp port> 465 (SSL)")
|
||
print('--beacon_dbm_diff', "--beacon_dbm_diff <value> is the delta that is allowed between the controller tx and the beacon measured")
|
||
|
||
|
||
print("-h|--help")
|
||
|
||
# see https://stackoverflow.com/a/13306095/11014343
|
||
class FileAdapter(object):
|
||
def __init__(self, logger):
|
||
self.logger = logger
|
||
def write(self, data):
|
||
# NOTE: data can be a partial line, multiple lines
|
||
data = data.strip() # ignore leading/trailing whitespace
|
||
if data: # non-blank
|
||
self.logger.info(data)
|
||
def flush(self):
|
||
pass # leave it to logging to flush properly
|
||
|
||
def exit_test(workbook):
|
||
workbook.close()
|
||
sleep(0.5)
|
||
exit(1)
|
||
|
||
|
||
def main():
|
||
global lfmgr
|
||
global lfstation
|
||
global lfresource
|
||
global lfresource2
|
||
global outfile
|
||
global outfile_xlsx
|
||
global full_outfile
|
||
global upstream_port
|
||
global pf_dbm
|
||
global pf_a4_dropoff
|
||
|
||
scheme = "ssh"
|
||
|
||
parser = argparse.ArgumentParser(description="Cisco TX Power report Script",epilog=EPILOG,
|
||
formatter_class=argparse.RawTextHelpFormatter)
|
||
parser.add_argument("-d", "--dest", type=str, help="address of the cisco controller")
|
||
parser.add_argument("-o", "--port", type=str, help="control port on the controller", default=23)
|
||
parser.add_argument("-u", "--user", type=str, help="credential login/username")
|
||
parser.add_argument("-p", "--passwd", type=str, help="credential password")
|
||
parser.add_argument("-s", "--scheme", type=str, choices=["serial", "ssh", "telnet"], help="Connect via serial, ssh or telnet")
|
||
parser.add_argument("-t", "--tty", type=str, help="tty serial device")
|
||
parser.add_argument("-l", "--log", action='store_true', help="create logfile for messages, default stdout")
|
||
parser.add_argument("-a", "--ap", type=str, help="select AP")
|
||
parser.add_argument("-b", "--bandwidth", type=str, help="List of bandwidths to test. NA means no change")
|
||
parser.add_argument("-c", "--channel", type=str, help="List of channels to test, with optional path-loss, 36:64 149:60. NA means no change")
|
||
parser.add_argument("-n", "--nss", type=str, help="List of spatial streams to test. NA means no change")
|
||
parser.add_argument("-T", "--txpower", type=str, help="List of txpowers to test. NA means no change")
|
||
parser.add_argument("-k","--keep_state", action="store_true",help="keep the state, no configuration change at the end of the test")
|
||
parser.add_argument('-D','--duration', type=str, help='--traffic <how long to run in seconds> example -t 20 (seconds) default: 20 ',default='20')
|
||
parser.add_argument("--station", type=str, help="LANforge station to use (sta0000, etc)")
|
||
parser.add_argument("--upstream_port", type=str, help="LANforge upsteram-port to use (eth1, etc)")
|
||
parser.add_argument("--lfmgr", type=str, help="LANforge Manager IP address")
|
||
parser.add_argument("--lfresource", type=str, help="LANforge resource ID for the station")
|
||
parser.add_argument("--lfresource2", type=str, help="LANforge resource ID for the upstream port system")
|
||
parser.add_argument("--outfile", type=str, help="Output file for csv data",default="cisco_power_results")
|
||
parser.add_argument("--pathloss", type=str, help="Calculated pathloss between LANforge Station and AP")
|
||
parser.add_argument("--antenna_gain", type=str, help="Antenna gain, take into account the gain due to the antenna",default="0")
|
||
parser.add_argument("--band", type=str, help="Select band (a | b), a means 5Ghz, b means 2.4Ghz. Default is a",
|
||
choices=["a", "b", "abgn"])
|
||
parser.add_argument("--pf_dbm", type=str, help="Pass/Fail threshold. Default is 6")
|
||
parser.add_argument("--pf_a4_dropoff", type=str, help="Allow one chain to use lower tx-power and still pass when doing 4x4. Default is 3")
|
||
parser.add_argument("--wait_forever", action='store_true', help="Wait forever for station to associate, may aid debugging if STA cannot associate properly")
|
||
parser.add_argument("--adjust_nf", action='store_true', help="Adjust RSSI based on noise-floor. ath10k without the use-real-noise-floor fix needs this option")
|
||
parser.add_argument("--wlan", type=str, help="--wlan 9800, wlan identifier defaults to wlan-open",default="wlan-open")
|
||
parser.add_argument("--wlanID", type=str, help="--wlanID 9800 , defaults to 1",default="1")
|
||
parser.add_argument("--series", type=str, help="--series 9800 , defaults to 3504",default="3504")
|
||
parser.add_argument("--slot", type=str, help="--slot 1 , 9800 AP slot defaults to 1",default="1")
|
||
parser.add_argument("--create_station", type=str, help="create LANforge station at the beginning of the test")
|
||
parser.add_argument("--radio", type=str, help="radio to create LANforge station on at the beginning of the test")
|
||
parser.add_argument("--ssid", type=str, help="ssid default open-wlan",default="open-wlan")
|
||
parser.add_argument("--ssidpw", type=str, help="ssidpw default [BLANK]",default="[BLANK]")
|
||
parser.add_argument("--security", type=str, help="security default open",default="open")
|
||
parser.add_argument("--cleanup", action='store_true',help="--cleanup , Clean up stations after test completes ")
|
||
parser.add_argument("--vht160", action='store_true',help="--vht160 , Enable VHT160 in lanforge ")
|
||
parser.add_argument('--verbose', action='store_true',help='--verbose , switch the cisco controller output will be captured')
|
||
parser.add_argument("--exit_on_fail", action='store_true',help="--exit_on_fail, exit on test failure")
|
||
parser.add_argument("--exit_on_error", action='store_true',help="--exit_on_error, exit on test error, test mechanics failed")
|
||
parser.add_argument('-e','--email', action='append', nargs=1, type=str, help="--email user==<from email> passwd==<email password> to==<to email> smtp==<smtp server> port==<smtp port> 465 (SSL)")
|
||
parser.add_argument('-ccp','--prompt', type=str,help="controller prompt default WLC",default="WLC")
|
||
parser.add_argument('--beacon_dbm_diff', type=str,help="--beacon_dbm_diff <value> is the delta that is allowed between the controller tx and the beacon measured",default="7")
|
||
|
||
#current_time = time.strftime("%Y-%m-%d %H:%M:%S", time.localtime()) + "{:.3f}".format(time.time() - (math.floor(time.time())))[1:]
|
||
#print(current_time)
|
||
#usage()
|
||
args = None
|
||
try:
|
||
args = parser.parse_args()
|
||
if (args.scheme != None):
|
||
scheme = args.scheme
|
||
#logfile = args.log
|
||
if (args.station != None):
|
||
lfstation = args.station
|
||
if (args.create_station != None):
|
||
lfstation = args.create_station
|
||
if (args.station != None):
|
||
print("NOTE: both station: {} and create_station: {} on command line, test will use create_station {} ".format(args.station, args.create_station, args.create_station))
|
||
if (args.upstream_port != None):
|
||
upstream_port = args.upstream_port
|
||
if (args.lfmgr != None):
|
||
lfmgr = args.lfmgr
|
||
if (args.lfresource != None):
|
||
lfresource = args.lfresource
|
||
if (args.lfresource2 != None):
|
||
lfresource2 = args.lfresource2
|
||
if (args.outfile != None):
|
||
outfile = args.outfile
|
||
full_outfile = "full-%s"%(outfile)
|
||
outfile_xlsx = "%s.xlsx"%(outfile)
|
||
if (args.band != None):
|
||
band = args.band
|
||
else:
|
||
band = "a"
|
||
if (args.pf_dbm != None):
|
||
pf_dbm = args.pf_dbm
|
||
if (args.pf_a4_dropoff != None):
|
||
pf_a4_dropoff = args.pf_p4_dropoff
|
||
if (args.verbose):
|
||
# capture the controller output , thus won't got to stdout some output always present
|
||
cap_ctl_out = False
|
||
else:
|
||
cap_ctl_out = True
|
||
print("cap_ctl_out {}".format(cap_ctl_out))
|
||
# note: there would always be an args.outfile due to the default
|
||
current_time = time.strftime("%m_%d_%Y_%H_%M_%S", time.localtime())
|
||
outfile = "{}_{}.txt".format(args.outfile,current_time)
|
||
full_outfile = "{}_full_{}.txt".format(args.outfile,current_time)
|
||
outfile_xlsx = "{}_{}.xlsx".format(args.outfile,current_time)
|
||
print("output file: {}".format(outfile))
|
||
print("output file full: {}".format(full_outfile))
|
||
print("output file xlsx: {}".format(outfile_xlsx))
|
||
if args.log:
|
||
outfile_log = "{}_{}_output_log.log".format(args.outfile,current_time)
|
||
print("output file log: {}".format(outfile_log))
|
||
email_dicts = []
|
||
if args.email:
|
||
emails = args.email
|
||
for _email in emails:
|
||
#print("email {}".format(_email))
|
||
email_keys = ['user','passwd','to','smtp','port']
|
||
_email_dict = dict(map(lambda x: x.split('=='), str(_email).replace('[','').replace(']','').replace("'","").split()))
|
||
#print("email_dict {}".format(_email_dict))
|
||
for key in email_keys:
|
||
if key not in _email_dict:
|
||
print("missing config, for the {}, all of the following need to be present {} ".format(key,email_keys))
|
||
exit(1)
|
||
email_dicts.append(_email_dict)
|
||
print("email_dicts: {}".format(email_dicts))
|
||
|
||
except Exception as e:
|
||
logging.exception(e)
|
||
usage()
|
||
exit(2)
|
||
|
||
|
||
console_handler = logging.StreamHandler()
|
||
formatter = logging.Formatter(FORMAT)
|
||
logg = logging.getLogger(__name__)
|
||
logg.setLevel(logging.DEBUG)
|
||
|
||
file_handler = None
|
||
if args.log:
|
||
file_handler = logging.FileHandler(outfile_log, "w")
|
||
file_handler.setLevel(logging.DEBUG)
|
||
file_handler.setFormatter(formatter)
|
||
logg.addHandler(file_handler)
|
||
logg.addHandler(logging.StreamHandler(sys.stdout)) # allows to logging to file and stderr
|
||
#logging.basicConfig(format=FORMAT, handlers=[console_handler])
|
||
|
||
else:
|
||
#pass
|
||
# stdout logging
|
||
logging.basicConfig(format=FORMAT, handlers=[console_handler])
|
||
#logg.addHandler(logging.StreamHandler()) # allows to logging to file and stderr
|
||
|
||
|
||
if bool(email_dicts):
|
||
logg.info("email_dicts {}".format(email_dicts))
|
||
|
||
if args.outfile != None:
|
||
logg.info("output file: {}".format(outfile))
|
||
logg.info("output file full: {}".format(full_outfile))
|
||
logg.info("output file xlsx: {}".format(outfile_xlsx))
|
||
|
||
if args.log:
|
||
logg.info("output file log: {}".format(outfile_log))
|
||
|
||
|
||
if (args.bandwidth == None):
|
||
logg.info("ERROR: Must specify bandwidths")
|
||
exit(1)
|
||
|
||
if (args.channel == None):
|
||
logg.info("ERROR: Must specify channels")
|
||
exit(1)
|
||
|
||
if (args.nss == None):
|
||
logg.info("ERROR: Must specify NSS")
|
||
exit(1)
|
||
|
||
if (args.txpower == None):
|
||
logg.info("ERROR: Must specify txpower")
|
||
exit(1)
|
||
|
||
if (args.pathloss == None):
|
||
logg.info("ERROR: Pathloss must be specified.")
|
||
exit(1)
|
||
|
||
if (args.antenna_gain == None):
|
||
logg.info("ERROR: Antenna gain must be specified.")
|
||
exit(1)
|
||
|
||
# Full spread-sheet data
|
||
csv = open(full_outfile, "w")
|
||
csv.write("Regulatory Domain\tCabling Pathloss\tAntenna Gain\tCfg-Channel\tCfg-NSS\tCfg-AP-BW\tTx Power\tBeacon-Signal\tCombined-Signal\tRSSI 1\tRSSI 2\tRSSI 3\tRSSI 4\tAP-BSSID\tRpt-BW\tRpt-Channel\tRpt-Mode\tRpt-NSS\tRpt-Noise\tRpt-Rxrate\tCtrl-AP-MAC\tCtrl-Channel\tCtrl-Power\tCtrl-dBm\tCalc-dBm-Combined\tDiff-dBm-Combined\tAnt-1\tAnt-2\tAnt-3\tAnt-4\tOffset-1\tOffset-2\tOffset-3\tOffset-4\tPASS/FAIL(+-%sdB)\tTimeStamp\tWarnings-and-Errors"%(pf_dbm))
|
||
csv.write("\n");
|
||
csv.flush()
|
||
|
||
# Summary spread-sheet data
|
||
csvs = open(outfile, "w")
|
||
csvs.write("Regulatory Domain\tCabling Pathloss\tAntenna Gain\tAP Channel\tNSS\tAP BW\tTx Power\tAllowed Per-Path\tRSSI 1\tRSSI 2\tRSSI 3\tRSSI 4\tAnt-1\tAnt-2\tAnt-3\tAnt-4\tOffset-1\tOffset-2\tOffset-3\tOffset-4\tPASS/FAIL(+-%sdB)\tTimeStamp\tWarnings-and-Errors"%(pf_dbm))
|
||
csvs.write("\n");
|
||
csvs.flush()
|
||
|
||
# XLSX file
|
||
workbook = xlsxwriter.Workbook(outfile_xlsx)
|
||
worksheet = workbook.add_worksheet()
|
||
|
||
#bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dblue_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dblue_bold.set_bg_color("#b8cbe4")
|
||
dblue_bold.set_border(1)
|
||
dtan_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dtan_bold.set_bg_color("#dcd8c3")
|
||
dtan_bold.set_border(1)
|
||
dpeach_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dpeach_bold.set_bg_color("#ffd8bb")
|
||
dpeach_bold.set_border(1)
|
||
dpink_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dpink_bold.set_bg_color("#fcc8ca")
|
||
dpink_bold.set_border(1)
|
||
dyel_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dyel_bold.set_bg_color("#ffe699")
|
||
dyel_bold.set_border(1)
|
||
dgreen_bold = workbook.add_format({'bold': True, 'align': 'center'})
|
||
dgreen_bold.set_bg_color("#c6e0b4")
|
||
dgreen_bold.set_border(1)
|
||
dgreen_bold_left = workbook.add_format({'bold': True, 'align': 'left'})
|
||
dgreen_bold_left.set_bg_color("#c6e0b4")
|
||
dgreen_bold_left.set_border(1)
|
||
#center = workbook.add_format({'align': 'center'})
|
||
center_blue = workbook.add_format({'align': 'center'})
|
||
center_blue.set_bg_color("#dbe5f1")
|
||
center_blue.set_border(1)
|
||
center_tan = workbook.add_format({'align': 'center'})
|
||
center_tan.set_bg_color("#edede1")
|
||
center_tan.set_border(1)
|
||
center_peach = workbook.add_format({'align': 'center'})
|
||
center_peach.set_bg_color("#fce4d6")
|
||
center_peach.set_border(1)
|
||
center_yel = workbook.add_format({'align': 'center'})
|
||
center_yel.set_bg_color("#fdf2cc")
|
||
center_yel.set_border(1)
|
||
center_yel_red = workbook.add_format({'align': 'center', 'color': 'red'})
|
||
center_yel_red.set_bg_color("#fdf2cc")
|
||
center_yel_red.set_border(1)
|
||
center_pink = workbook.add_format({'align': 'center'})
|
||
center_pink.set_bg_color("ffd2d3")
|
||
center_pink.set_border(1)
|
||
red = workbook.add_format({'color': 'red', 'align': 'center'})
|
||
red.set_bg_color("#e0efda")
|
||
red.set_border(1)
|
||
red_left = workbook.add_format({'color': 'red', 'align': 'left'})
|
||
red_left.set_bg_color("#e0efda")
|
||
red_left.set_border(1)
|
||
green = workbook.add_format({'color': 'green', 'align': 'center'})
|
||
green.set_bg_color("#e0efda")
|
||
green.set_border(1)
|
||
green_left = workbook.add_format({'color': 'green', 'align': 'left'})
|
||
green_left.set_bg_color("#e0efda")
|
||
green_left.set_border(1)
|
||
orange_left = workbook.add_format({'color': 'orange', 'align': 'left'})
|
||
orange_left.set_bg_color("#e0efda")
|
||
orange_left.set_border(1)
|
||
|
||
|
||
worksheet.set_row(0, 45) # Set height
|
||
worksheet.set_column(0, 0, 10) # Set width
|
||
|
||
col = 0
|
||
row = 0
|
||
worksheet.write(row, col, 'Regulatory\nDomain', dblue_bold); col += 1
|
||
worksheet.write(row, col, 'AP\nChannel', dblue_bold); col += 1
|
||
worksheet.write(row, col, 'NSS', dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Controller\nBW', dblue_bold); col += 1
|
||
worksheet.write(row, col, 'STA\nRpt\nBW', dblue_bold); col += 1
|
||
worksheet.write(row, col, 'Tx\nPower', dtan_bold); col += 1
|
||
worksheet.write(row, col, 'Allowed\nPer\nPath', dtan_bold); col += 1
|
||
worksheet.write(row, col, 'Cabling\nPathloss', dtan_bold); col += 1
|
||
worksheet.write(row, col, 'Antenna\nGain', dtan_bold); col += 1
|
||
worksheet.write(row, col, 'Noise\n', dpeach_bold); col += 1
|
||
if (args.adjust_nf):
|
||
worksheet.write(row, col, 'Noise\nAdjust\n(vs -105)', dpeach_bold); col += 1
|
||
|
||
worksheet.set_column(col, col, 15) # Set width
|
||
worksheet.write(row, col, 'Last\nMCS\n', dpeach_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Beacon\nRSSI\n', dpeach_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Combined\nRSSI\n', dpeach_bold); col += 1
|
||
worksheet.write(row, col, 'RSSI\n1', dpeach_bold); col += 1
|
||
worksheet.write(row, col, 'RSSI\n2', dpeach_bold); col += 1
|
||
worksheet.write(row, col, 'RSSI\n3', dpeach_bold); col += 1
|
||
worksheet.write(row, col, 'RSSI\n4', dpeach_bold); col += 1
|
||
worksheet.write(row, col, 'Ant\n1', dpink_bold); col += 1
|
||
worksheet.write(row, col, 'Ant\n2', dpink_bold); col += 1
|
||
worksheet.write(row, col, 'Ant\n3', dpink_bold); col += 1
|
||
worksheet.write(row, col, 'Ant\n4', dpink_bold); col += 1
|
||
worksheet.write(row, col, 'Offset\n1', dyel_bold); col += 1
|
||
worksheet.write(row, col, 'Offset\n2', dyel_bold); col += 1
|
||
worksheet.write(row, col, 'Offset\n3', dyel_bold); col += 1
|
||
worksheet.write(row, col, 'Offset\n4', dyel_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Controller\n dBm', dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Calculated\n dBm\n Beacon', dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 14) # Set width
|
||
worksheet.write(row, col, 'Diff\nController dBm\n & Beacon dBm\n (+/- {} dBm)'.format(args.beacon_dbm_diff), dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 10) # Set width
|
||
worksheet.write(row, col, 'Calculated\n dBm\n Combined', dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 14) # Set width
|
||
worksheet.write(row, col, 'Diff\nController dBm\n & Combined', dblue_bold); col += 1
|
||
worksheet.set_column(col, col, 12) # Set width
|
||
worksheet.write(row, col, "PASS /\nFAIL\n( += %s dBm)"%(pf_dbm), dgreen_bold); col += 1
|
||
worksheet.set_column(col, col, 24) # Set width
|
||
worksheet.write(row, col, 'Time Stamp\n', dgreen_bold); col += 1
|
||
worksheet.set_column(col, col, 100) # Set width
|
||
worksheet.write(row, col, 'Warnings and Errors', dgreen_bold_left); col += 1
|
||
row += 1
|
||
|
||
bandwidths = args.bandwidth.split()
|
||
channels = args.channel.split()
|
||
nss = args.nss.split()
|
||
txpowers = args.txpower.split()
|
||
|
||
if (args.create_station != None):
|
||
if (args.radio == None):
|
||
logg.info("WARNING --create needs a radio")
|
||
exit_test(workbook)
|
||
elif (args.vht160):
|
||
logg.info("creating station with VHT160 set: {} on radio {}".format(args.create_station,args.radio))
|
||
subprocess.run(["./lf_associate_ap.pl", "--radio", args.radio, "--ssid", args.ssid , "--passphrase", args.ssidpw,
|
||
"--security", args.security, "--upstream", args.upstream_port, "--first_ip", "DHCP",
|
||
"--first_sta",args.create_station,"--action","add","--xsec","ht160_enable"], timeout=20, capture_output=True)
|
||
sleep(3)
|
||
else:
|
||
logg.info("creating station: {} on radio {}".format(args.create_station,args.radio))
|
||
subprocess.run(["./lf_associate_ap.pl", "--radio", args.radio, "--ssid", args.ssid , "--passphrase", args.ssidpw,
|
||
"--security", args.security, "--upstream", args.upstream_port, "--first_ip", "DHCP",
|
||
"--first_sta",args.create_station,"--action","add"], timeout=20, capture_output=True)
|
||
sleep(3)
|
||
|
||
|
||
# Find LANforge station parent radio
|
||
parent = None
|
||
port_stats = subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--show_port", "Parent/Peer"], capture_output=True);
|
||
pss = port_stats.stdout.decode('utf-8', 'ignore');
|
||
for line in pss.splitlines():
|
||
m = re.search('Parent/Peer:\s+(.*)', line)
|
||
if (m != None):
|
||
parent = m.group(1)
|
||
|
||
|
||
# Create downstream connection
|
||
# First, delete any old one
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "rm_cx all c-udp-power"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "rm_endp c-udp-power-A"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource2, "--action", "do_cmd",
|
||
"--cmd", "rm_endp c-udp-power-B"], capture_output=True);
|
||
|
||
# Now, create the new connection
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "create_endp", "--port_name", lfstation,
|
||
"--endp_type", "lf_udp", "--endp_name", "c-udp-power-A", "--speed", "0", "--report_timer", "1000"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource2, "--action", "create_endp", "--port_name", upstream_port,
|
||
"--endp_type", "lf_udp", "--endp_name", "c-udp-power-B", "--speed", "1000000", "--report_timer", "1000"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "create_cx", "--cx_name", "c-udp-power",
|
||
"--cx_endps", "c-udp-power-A,c-udp-power-B", "--report_timer", "1000"], capture_output=True);
|
||
|
||
myrd = ""
|
||
|
||
if args.series == "9800":
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: no_logging_console")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "no_logging_console","--series",args.series,"--port",args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore');
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: line_console_0")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "line_console_0","--series",args.series,"--port",args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore');
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: summary")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "summary","--series",args.series,"--port",args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore');
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# Find our current regulatory domain so we can report it properly
|
||
searchap = False
|
||
for line in pss.splitlines():
|
||
if (line.startswith("---------")):
|
||
searchap = True
|
||
continue
|
||
|
||
if (searchap):
|
||
if args.series == "9800":
|
||
pat = "%s\s+\S+\s+\S+\s+\S+\s+\S+\s+\S+\s+\S+\s+(\S+)"%(args.ap)
|
||
else:
|
||
pat = "%s\s+\S+\s+\S+\s+\S+\s+\S+.* (\S+)\s+\S+\s*\S+\s+\["%(args.ap)
|
||
m = re.search(pat, line)
|
||
if (m != None):
|
||
myrd = m.group(1)
|
||
|
||
# Loop through all iterations and run txpower tests.
|
||
wlan_created = False
|
||
for ch in channels:
|
||
pathloss = args.pathloss
|
||
antenna_gain = args.antenna_gain
|
||
ch_colon = ch.count(":")
|
||
if (ch_colon == 1):
|
||
cha = ch.split(":")
|
||
pathloss = cha[1]
|
||
ch = cha[0]
|
||
for n in nss:
|
||
for bw in bandwidths:
|
||
if (n != "NA"):
|
||
ni = int(n)
|
||
if (parent == None):
|
||
logg.info("ERROR: Skipping setting the spatial streams because cannot find Parent radio for station: %s."%(lfstation))
|
||
else:
|
||
# Set nss on LANforge Station, not sure it can be done on AP
|
||
if (bw == "160"):
|
||
# 9984 hardware needs 2 chains to do one NSS at 160Mhz
|
||
if (ni > 2):
|
||
if(args.vht160):
|
||
ni = 2
|
||
logg.info("NOTE: --vht160 set will set ni : {}".format(ni))
|
||
# Set radio to 2x requested value
|
||
ni *=2
|
||
logg.info("NOTE: --vht160 set will set ni * 2 : {}".format(ni))
|
||
else:
|
||
logg.info("NOTE: Skipping NSS %s for 160Mhz, LANforge radios do not support more than 2NSS at 160Mhz currently."%(n))
|
||
logg.info("NOTE: use --vht160 to force 2NSS at 160Mhz")
|
||
continue
|
||
else:
|
||
# Set radio to 2x requested value for 160Mhz
|
||
ni *= 2
|
||
antset = 0 # all available
|
||
if (ni == 1):
|
||
antset = 1
|
||
if (ni == 2):
|
||
antset = 4
|
||
if (ni == 3):
|
||
antset = 7
|
||
set_cmd = "set_wifi_radio 1 %s %s NA NA NA NA NA NA NA NA NA %s"%(lfresource, parent, antset)
|
||
logg.info("Setting LANforge radio to %s NSS with command: %s"%(ni, set_cmd))
|
||
subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", parent,
|
||
"--cli_cmd", set_cmd], capture_output=True)
|
||
|
||
for tx in txpowers:
|
||
|
||
e_tot = ""
|
||
w_tot = ""
|
||
|
||
# Stop traffic
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "set_cx_state all c-udp-power STOPPED"], capture_output=True);
|
||
|
||
# TODO: Down station
|
||
port_stats = subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--set_ifstate", "down"]);
|
||
|
||
# Disable AP, apply settings, enable AP
|
||
try:
|
||
logg.info("3504/9800 cisco_wifi_ctl.py: disable AP {}".format(args.ap))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
if args.series == "9800":
|
||
# 9800 series need to "Configure radio for manual channel assignment"
|
||
logg.info("9800 Configure radio for manual channel assignment")
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: disable_wlan")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable_wlan","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: disable_network_5ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable_network_5ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: disable_network_24ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable_network_24ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: manual")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "manual","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
else:
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11a disable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11a disable network","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11b disable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11b disable network","--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
logg.info("9800/3504 test_parameters_summary: set : tx: {} ch: {} bw: {}".format(tx,ch,bw))
|
||
if (tx != "NA"):
|
||
logg.info("9800/3504 test_parameters: set txPower: {}".format(tx))
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: txPower {}".format(tx))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "txPower", "--value", tx, "--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# NSS is set on the station earlier...
|
||
|
||
if (ch != "NA"):
|
||
logg.info("9800/3504 test_parameters set channel: {}".format(ch))
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: channel {}".format(ch))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "channel", "--value", ch, "--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
if (bw != "NA"):
|
||
logg.info("9800/3504 test_parameters bandwidth: set : {}".format(bw))
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: bandwidth {}".format(bw))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "bandwidth", "--value", bw, "--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# only create the wlan the first time
|
||
if args.series == "9800":
|
||
if wlan_created:
|
||
logg.info("wlan already present, no need to create wlan {} wlanID {} port {}".format(args.wlan, args.wlanID, args.port))
|
||
pass
|
||
else:
|
||
wlan_created = True
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: create_wlan wlan {} wlanID {} port {}".format(args.wlan, args.wlanID, args.port))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "create_wlan","--series",args.series, "--wlan", args.wlan, "--wlanID", args.wlanID,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: wireless_tag_policy")
|
||
ctl_output =subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "wireless_tag_policy","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: enable_wlan")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable_wlan","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# enable transmission for the entier 802.11z network
|
||
if args.series == "9800":
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: enable_network_5ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable_network_5ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: enable_network_24ghz")
|
||
ctl_output =subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable_network_24ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
else:
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11a enable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11a enable network","--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11a enable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11b enable network","--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: enable")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable", "--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# Wait a bit for AP to come back up
|
||
time.sleep(3)
|
||
loop_count = 0
|
||
cc_dbm_rcv = False
|
||
if args.series == "9800":
|
||
while cc_dbm_rcv == False and loop_count <=3:
|
||
logg.info("9800 read controller dBm")
|
||
loop_count +=1
|
||
time.sleep(1)
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: advanced")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "advanced","--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
searchap = False
|
||
cc_mac = ""
|
||
cc_ch = ""
|
||
cc_bw = ""
|
||
cc_power = ""
|
||
cc_dbm = ""
|
||
for line in pss.splitlines():
|
||
if (line.startswith("---------")):
|
||
searchap = True
|
||
continue
|
||
|
||
if (searchap):
|
||
pat = "%s\s+(\S+)\s+(%s)\s+\S+\s+\S+\s+(\S+)\s+(\S+)\s+(\S+)\s+dBm\)+\s+(\S+)+\s"%(args.ap,args.slot)
|
||
m = re.search(pat, line)
|
||
if (m != None):
|
||
if(m.group(2) == args.slot):
|
||
cc_mac = m.group(1)
|
||
cc_slot = m.group(2)
|
||
cc_ch = m.group(6); # (132,136,140,144)
|
||
cc_power = m.group(4)
|
||
cc_power = cc_power.replace("/", " of ") # spread-sheets turn 1/8 into a date
|
||
cc_dbm = m.group(5)
|
||
cc_dbm = cc_dbm.replace("(","")
|
||
|
||
cc_ch_count = cc_ch.count(",") + 1
|
||
cc_bw = m.group(3)
|
||
logg.info("group 1: {} 2: {} 3: {} 4: {} 5: {} 6: {}".format(m.group(1),m.group(2),m.group(3),m.group(4),m.group(5),m.group(6)))
|
||
logg.info("9800 test_parameters_summary: read: tx: {} ch: {} bw: {}".format(tx,ch,bw))
|
||
|
||
logg.info("9800 test_parameters cc_mac: read : {}".format(cc_mac))
|
||
logg.info("9800 test_parameters cc_slot: read : {}".format(cc_slot))
|
||
logg.info("9800 test_parameters cc_count: read : {}".format(cc_ch_count))
|
||
logg.info("9800 test_parameters cc_bw: read : {}".format(cc_bw))
|
||
logg.info("9800 test_parameters cc_power: read : {}".format(cc_power))
|
||
logg.info("9800 test_parameters cc_dbm: read : {}".format(cc_dbm))
|
||
logg.info("9800 test_parameters cc_ch: read : {}".format(cc_ch))
|
||
break
|
||
|
||
if (cc_dbm == ""):
|
||
if cc_dbm_rcv > 3:
|
||
# Could not talk to controller?
|
||
err = "ERROR: Could not query dBm from controller, maybe controller died?"
|
||
logg.info(err)
|
||
logg.info("Check controller and AP , Command on AP to erase the config: capwap ap erase all")
|
||
e_tot += err
|
||
e_tot += " "
|
||
else:
|
||
logg.info("9800 read controller dBm loop_count {}".format(loop_count))
|
||
else:
|
||
cc_dbm_rcv = True
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: show_wlan_summary")
|
||
wlan_summary = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "show_wlan_summary","--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = wlan_summary.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
else:
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: advanced")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "advanced","--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
searchap = False
|
||
cc_mac = ""
|
||
cc_ch = ""
|
||
cc_bw = ""
|
||
cc_power = ""
|
||
cc_dbm = ""
|
||
ch_count = ""
|
||
for line in pss.splitlines():
|
||
if (line.startswith("---------")):
|
||
searchap = True
|
||
continue
|
||
|
||
if (searchap):
|
||
pat = "%s\s+(\S+)\s+\S+\s+\S+\s+\S+\s+(\S+)\s+(\S+)\s+\(\s*(\S+)\s+dBm"%(args.ap)
|
||
m = re.search(pat, line)
|
||
if (m != None):
|
||
cc_mac = m.group(1)
|
||
cc_ch = m.group(2); # (132,136,140,144)
|
||
cc_power = m.group(3)
|
||
cc_power = cc_power.replace("/", " of ", 1) # spread-sheets turn 1/8 into a date
|
||
cc_dbm = m.group(4)
|
||
|
||
ch_count = cc_ch.count(",")
|
||
cc_bw = 20 * (ch_count + 1)
|
||
|
||
break
|
||
|
||
if (cc_dbm == ""):
|
||
# Could not talk to controller?
|
||
err = "ERROR: Could not query dBm from controller, maybe controller died?"
|
||
logg.info(err)
|
||
e_tot += err
|
||
e_tot += " "
|
||
|
||
logg.info("3504 test_parameters cc_mac: read : {}".format(cc_mac))
|
||
logg.info("3504 test_parameters cc_count: read : {}".format(ch_count))
|
||
logg.info("3504 test_parameters cc_bw: read : {}".format(cc_bw))
|
||
logg.info("3504 test_parameters cc_power: read : {}".format(cc_power))
|
||
logg.info("3504 test_parameters cc_dbm: read : {}".format(cc_dbm))
|
||
logg.info("3504 test_parameters cc_ch: read : {}".format(cc_ch))
|
||
|
||
|
||
# Up station
|
||
subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--set_ifstate", "up"]);
|
||
|
||
i = 0
|
||
wait_ip_print = False;
|
||
wait_assoc_print = False;
|
||
# Wait untill LANforge station connects
|
||
while True:
|
||
port_stats = subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--show_port", "AP,IP,Mode,NSS,Bandwidth,Channel,Signal,Noise,Status,RX-Rate"],capture_output=True, check=True)
|
||
pss = port_stats.stdout.decode('utf-8', 'ignore');
|
||
|
||
_status = None
|
||
_ip = None
|
||
|
||
for line in pss.splitlines():
|
||
m = re.search('Status:\s+(.*)', line)
|
||
if (m != None):
|
||
_status = m.group(1)
|
||
m = re.search('IP:\s+(.*)', line)
|
||
if (m != None):
|
||
_ip = m.group(1)
|
||
|
||
#logg.info("IP %s Status %s"%(_ip, _status))
|
||
|
||
if (_status == "Authorized"):
|
||
if ((_ip != None) and (_ip != "0.0.0.0")):
|
||
logg.info("Station is associated with IP address.")
|
||
break
|
||
else:
|
||
if (not wait_ip_print):
|
||
logg.info("Waiting for station to get IP Address.")
|
||
wait_ip_print = True
|
||
else:
|
||
if (not wait_assoc_print):
|
||
logg.info("Waiting up to 180s for station to associate.")
|
||
wait_assoc_print = True
|
||
|
||
i += 1
|
||
# We wait a fairly long time since AP will take a long time to start on a CAC channel.
|
||
if (i > 180):
|
||
err = "ERROR: Station did not connect within 180 seconds."
|
||
logg.info(err)
|
||
e_tot += err
|
||
e_tot += " "
|
||
if args.series == "9800":
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: advanced")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "advanced","--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
if (args.wait_forever):
|
||
logg.info("Will continue waiting, you may wish to debug the system...")
|
||
i = 0
|
||
else:
|
||
break
|
||
|
||
time.sleep(1)
|
||
|
||
# Start traffic
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "set_cx_state all c-udp-power RUNNING"], capture_output=True, check=True)
|
||
|
||
# Wait 10 more seconds
|
||
logg.info("Waiting {} seconds to let traffic run for a bit, Channel {} NSS {} BW {} TX-Power {}".format(args.duration,ch, n, bw, tx))
|
||
time.sleep(int(args.duration))
|
||
|
||
# Gather probe results and record data, verify NSS, BW, Channel
|
||
i = 0;
|
||
beacon_sig = None
|
||
sig = None
|
||
pf = 1
|
||
ants = []
|
||
while True:
|
||
time.sleep(1)
|
||
port_stats = subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--cli_cmd", "probe_port 1 %s %s"%(lfresource, lfstation)],capture_output=True, check=True)
|
||
pss = port_stats.stdout.decode('utf-8', 'ignore')
|
||
#logg.info(pss)
|
||
|
||
foundit = False
|
||
for line in pss.splitlines():
|
||
#logg.info("probe-line: %s"%(line))
|
||
m = re.search('signal avg:\s+(\S+)\s+\[(.*)\]\s+dBm', line)
|
||
if (m != None):
|
||
sig = m.group(1)
|
||
ants = m.group(2).split()
|
||
q = 0
|
||
for a in ants:
|
||
ants[q] = ants[q].replace(",", "", 1)
|
||
q += 1
|
||
|
||
logg.info("sig: %s ants: %s ants-len: %s n: %s"%(sig, m.group(2), len(ants), n))
|
||
|
||
if (len(ants) == int(n)):
|
||
foundit = True
|
||
else:
|
||
logg.info("Looking for %s spatial streams, signal avg reported fewer: %s"%(n, m.group(1)))
|
||
|
||
m = re.search('beacon signal avg:\s+(\S+)\s+dBm', line)
|
||
if (m != None):
|
||
beacon_sig = m.group(1)
|
||
logg.info("beacon_sig: %s "%(beacon_sig))
|
||
|
||
if (foundit):
|
||
break
|
||
|
||
i += 1
|
||
if (i > 10):
|
||
err = "Tried and failed 10 times to find correct spatial streams, continuing."
|
||
logg.info(err)
|
||
e_tot += err
|
||
e_tot += " "
|
||
while (len(ants) < int(n)):
|
||
ants.append("")
|
||
break
|
||
|
||
endp_stats = subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--endp_vals", "rx_bps",
|
||
"--cx_name", "c-udp-power"],capture_output=True, check=True)
|
||
|
||
pss = endp_stats.stdout.decode('utf-8', 'ignore')
|
||
#logg.info(pss)
|
||
|
||
for line in pss.splitlines():
|
||
#logg.info("probe-line: %s"%(line))
|
||
m = re.search('Rx Bytes:\s+(\d+)', line)
|
||
if (m != None):
|
||
rx_bytes = int(m.group(1))
|
||
if (rx_bytes == 0):
|
||
err = "ERROR: No bytes received by data connection, test results may not be valid."
|
||
e_tot += err
|
||
e_tot += " "
|
||
|
||
# Stop traffic
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "set_cx_state all c-udp-power STOPPED"],capture_output=True, check=True)
|
||
|
||
antstr = ""
|
||
for x in range(4):
|
||
if (x < int(n)):
|
||
#logg.info("x: %s n: %s len(ants): %s"%(x, n, len(ants)))
|
||
antstr += ants[x]
|
||
else:
|
||
antstr += " "
|
||
antstr += "\t"
|
||
|
||
port_stats = subprocess.run(["./lf_portmod.pl", "--manager", lfmgr, "--card", lfresource, "--port_name", lfstation,
|
||
"--show_port", "AP,IP,Mode,NSS,Bandwidth,Channel,Signal,Noise,Status,RX-Rate"], capture_output=True, check=True)
|
||
pss = port_stats.stdout.decode('utf-8', 'ignore');
|
||
|
||
_ap = None
|
||
_bw = None
|
||
_ch = None
|
||
_mode = None
|
||
_nss = None
|
||
_noise = None
|
||
_rxrate = None
|
||
_noise_bare = None
|
||
|
||
for line in pss.splitlines():
|
||
m = re.search('AP:\s+(.*)', line)
|
||
if (m != None):
|
||
_ap = m.group(1)
|
||
m = re.search('Bandwidth:\s+(.*)Mhz', line)
|
||
if (m != None):
|
||
_bw = m.group(1)
|
||
m = re.search('Channel:\s+(.*)', line)
|
||
if (m != None):
|
||
_ch = m.group(1)
|
||
m = re.search('Mode:\s+(.*)', line)
|
||
if (m != None):
|
||
_mode = m.group(1)
|
||
m = re.search('NSS:\s+(.*)', line)
|
||
if (m != None):
|
||
_nss = m.group(1)
|
||
m = re.search('Noise:\s+(.*)', line)
|
||
if (m != None):
|
||
_noise = m.group(1)
|
||
m = re.search('Noise:\s+(.*)dBm', line)
|
||
if (m != None):
|
||
_noise_bare = m.group(1)
|
||
m = re.search('RX-Rate:\s+(.*)', line)
|
||
if (m != None):
|
||
_rxrate = m.group(1)
|
||
|
||
# ath10k radios now take noise-floor into account, so adjust_nf
|
||
# should remain set to false when using those radios. Possibly other
|
||
# radios would need this, so leave code in place.
|
||
rssi_adj = 0
|
||
if (args.adjust_nf and _noise_bare != None):
|
||
_noise_i = int(_noise_bare)
|
||
if (_noise_i == 0):
|
||
# Guess we could not detect noise properly?
|
||
e_tot += "WARNING: Invalid noise-floor, calculations may be inaccurate. "
|
||
pf = 0
|
||
else:
|
||
rssi_adj = (_noise_i - nf_at_calibration)
|
||
|
||
if (sig == None):
|
||
e_tot += "ERROR: Could not detect signal level. "
|
||
sig = -100
|
||
pf = 0
|
||
|
||
if (beacon_sig == None):
|
||
e_tot += "ERROR: Could not detect beacon signal level. "
|
||
beacon_sig = -100
|
||
pf = 0
|
||
|
||
pi = int(pathloss)
|
||
ag = int(antenna_gain)
|
||
calc_dbm_beacon = int(beacon_sig) + pi + rssi_adj + ag
|
||
logg.info("calc_dbm_beacon".format(calc_dbm_beacon))
|
||
|
||
logg.info("sig: %s"%sig)
|
||
calc_dbm = int(sig) + pi + rssi_adj + ag
|
||
logg.info("calc_dbm %s"%(calc_dbm))
|
||
|
||
|
||
# Calculated per-antenna power is what we calculate the AP transmitted
|
||
# at (rssi + pathloss + antenna_gain ). So, if we see -30 rssi, with pathloss of 44 ,
|
||
# with antenna gain of 6
|
||
# then we calculate AP transmitted at +20
|
||
calc_ant1 = 0
|
||
if (ants[0] != ""):
|
||
calc_ant1 = int(ants[0]) + pi + rssi_adj + ag
|
||
calc_ant2 = 0
|
||
calc_ant3 = 0
|
||
calc_ant4 = 0
|
||
if (len(ants) > 1 and ants[1] != ""):
|
||
calc_ant2 = int(ants[1]) + pi + rssi_adj + ag
|
||
if (len(ants) > 2 and ants[2] != ""):
|
||
calc_ant3 = int(ants[2]) + pi + rssi_adj + ag
|
||
if (len(ants) > 3 and ants[3] != ""):
|
||
calc_ant4 = int(ants[3]) + pi + rssi_adj + ag
|
||
|
||
diff_a1 = ""
|
||
diff_a2 = ""
|
||
diff_a3 = ""
|
||
diff_a4 = ""
|
||
|
||
if (cc_dbm == ""):
|
||
cc_dbmi = 0
|
||
else:
|
||
cc_dbmi = int(cc_dbm)
|
||
diff_dbm = calc_dbm - cc_dbmi
|
||
diff_dbm_beacon = calc_dbm_beacon - cc_dbmi
|
||
if(int(abs(diff_dbm_beacon)) > int(args.beacon_dbm_diff)):
|
||
w_tot = "WARNING: Controller and beacon power different by greater than +/- {} dBm".format(args.beacon_dbm_diff)
|
||
|
||
pfs = "PASS"
|
||
pfrange = pf_dbm;
|
||
|
||
|
||
|
||
# Allowed per path is what we expect the AP should be transmitting at.
|
||
# calc_ant1 is what we calculated it actually transmitted at based on rssi
|
||
# pathloss and antenna gain. Allowed per-path is modified taking into account that multi
|
||
# NSS tranmission will mean that each chain should be decreased so that sum total
|
||
# of all chains is equal to the maximum allowed txpower.
|
||
allowed_per_path = cc_dbmi
|
||
if (int(_nss) == 1):
|
||
diff_a1 = calc_ant1 - cc_dbmi
|
||
if (abs(diff_a1) > pfrange):
|
||
pf = 0
|
||
if (int(_nss) == 2):
|
||
# NSS of 2 means each chain should transmit at 1/2 total power, thus the '- 3'
|
||
allowed_per_path = cc_dbmi - 3
|
||
diff_a1 = calc_ant1 - allowed_per_path
|
||
diff_a2 = calc_ant2 - allowed_per_path
|
||
if ((abs(diff_a1) > pfrange) or
|
||
(abs(diff_a2) > pfrange)):
|
||
pf = 0
|
||
if (int(_nss) == 3):
|
||
# NSS of 3 means each chain should transmit at 1/3 total power, thus the '- 5'
|
||
allowed_per_path = cc_dbmi - 5
|
||
diff_a1 = calc_ant1 - allowed_per_path
|
||
diff_a2 = calc_ant2 - allowed_per_path
|
||
diff_a3 = calc_ant3 - allowed_per_path
|
||
if ((abs(diff_a1) > pfrange) or
|
||
(abs(diff_a2) > pfrange) or
|
||
(abs(diff_a3) > pfrange)):
|
||
pf = 0
|
||
if (int(_nss) == 4):
|
||
# NSS of 4 means each chain should transmit at 1/4 total power, thus the '- 6'
|
||
allowed_per_path = cc_dbmi - 6
|
||
diff_a1 = calc_ant1 - allowed_per_path
|
||
diff_a2 = calc_ant2 - allowed_per_path
|
||
diff_a3 = calc_ant3 - allowed_per_path
|
||
diff_a4 = calc_ant4 - allowed_per_path
|
||
# DUT transmits one chain at lower power when using higher MCS, so allow
|
||
# for that as passing result.
|
||
failed_low = 0
|
||
least = 0
|
||
if (diff_a1 < -pfrange):
|
||
failed_low += 1
|
||
least = diff_a1
|
||
if (diff_a2 < -pfrange):
|
||
failed_low += 1
|
||
least = min(least, diff_a2)
|
||
if (diff_a3 < -pfrange):
|
||
failed_low += 1
|
||
least = min(least, diff_a3)
|
||
if (diff_a4 < -pfrange):
|
||
failed_low += 1
|
||
least = min(least, diff_a4)
|
||
|
||
if ((least < (-pfrange - pf_a4_dropoff)) or (failed_low >= 1)):
|
||
pf = 0
|
||
|
||
if (diff_a1 > pfrange):
|
||
pf = 0
|
||
if (diff_a2 > pfrange):
|
||
pf = 0
|
||
if (diff_a3 > pfrange):
|
||
pf = 0
|
||
if (diff_a4 > pfrange):
|
||
pf = 0
|
||
|
||
logg.info("_nss {} allowed_per_path (AP should be transmitting at) {}".format(_nss, allowed_per_path))
|
||
|
||
if (pf == 0 or e_tot != ""):
|
||
pfs = "FAIL"
|
||
|
||
time_stamp = time.strftime("%Y-%m-%d %H:%M:%S", time.localtime()) + "{:.3f}".format(time.time() - (math.floor(time.time())))[1:]
|
||
ln = "%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s"%(
|
||
myrd, pathloss, antenna_gain, ch, n, bw, tx, beacon_sig, sig,
|
||
antstr, _ap, _bw, _ch, _mode, _nss, _noise, _rxrate,
|
||
cc_mac, cc_ch, cc_power, cc_dbm,
|
||
calc_dbm, diff_dbm, calc_ant1, calc_ant2, calc_ant3, calc_ant4,
|
||
diff_a1, diff_a2, diff_a3, diff_a4, pfs, time_stamp
|
||
)
|
||
|
||
#logg.info("RESULT: %s"%(ln))
|
||
csv.write(ln)
|
||
csv.write("\t")
|
||
|
||
ln = "%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s\t%s"%(
|
||
myrd, pathloss, antenna_gain, _ch, _nss, _bw, tx, allowed_per_path,
|
||
antstr,
|
||
calc_ant1, calc_ant2, calc_ant3, calc_ant4,
|
||
diff_a1, diff_a2, diff_a3, diff_a4, pfs, time_stamp
|
||
)
|
||
csvs.write(ln)
|
||
csvs.write("\t")
|
||
|
||
|
||
col = 0
|
||
worksheet.write(row, col, myrd, center_blue); col += 1
|
||
worksheet.write(row, col, _ch, center_blue); col += 1
|
||
worksheet.write(row, col, _nss, center_blue); col += 1
|
||
worksheet.write(row, col, cc_bw, center_blue); col += 1
|
||
worksheet.write(row, col, _bw, center_blue); col += 1
|
||
worksheet.write(row, col, tx, center_tan); col += 1
|
||
worksheet.write(row, col, allowed_per_path, center_tan); col += 1
|
||
worksheet.write(row, col, pathloss, center_tan); col += 1
|
||
worksheet.write(row, col, antenna_gain, center_tan); col += 1
|
||
worksheet.write(row, col, _noise, center_tan); col += 1
|
||
if (args.adjust_nf):
|
||
worksheet.write(row, col, rssi_adj, center_tan); col += 1
|
||
worksheet.write(row, col, _rxrate, center_tan); col += 1
|
||
worksheet.write(row, col, beacon_sig, center_tan); col += 1
|
||
worksheet.write(row, col, sig, center_tan); col += 1
|
||
for x in range(4):
|
||
if (x < int(n)):
|
||
worksheet.write(row, col, ants[x], center_peach); col += 1
|
||
else:
|
||
worksheet.write(row, col, " ", center_peach); col += 1
|
||
worksheet.write(row, col, calc_ant1, center_pink); col += 1
|
||
worksheet.write(row, col, calc_ant2, center_pink); col += 1
|
||
worksheet.write(row, col, calc_ant3, center_pink); col += 1
|
||
worksheet.write(row, col, calc_ant4, center_pink); col += 1
|
||
|
||
if (diff_a1 != "" and abs(diff_a1) > pfrange):
|
||
worksheet.write(row, col, diff_a1, center_yel_red); col += 1
|
||
else:
|
||
worksheet.write(row, col, diff_a1, center_yel); col += 1
|
||
if (diff_a2 != "" and abs(diff_a2) > pfrange):
|
||
worksheet.write(row, col, diff_a2, center_yel_red); col += 1
|
||
else:
|
||
worksheet.write(row, col, diff_a2, center_yel); col += 1
|
||
if (diff_a3 != "" and abs(diff_a3) > pfrange):
|
||
worksheet.write(row, col, diff_a3, center_yel_red); col += 1
|
||
else:
|
||
worksheet.write(row, col, diff_a3, center_yel); col += 1
|
||
if (diff_a4 != "" and abs(diff_a4) > pfrange):
|
||
worksheet.write(row, col, diff_a4, center_yel_red); col += 1
|
||
else:
|
||
worksheet.write(row, col, diff_a4, center_yel); col += 1
|
||
worksheet.write(row, col, cc_dbmi, center_blue); col +=1
|
||
worksheet.write(row, col, calc_dbm_beacon, center_blue); col +=1
|
||
worksheet.write(row, col, diff_dbm_beacon, center_blue); col +=1
|
||
worksheet.write(row, col, calc_dbm, center_blue); col +=1
|
||
worksheet.write(row, col, diff_dbm, center_blue); col +=1
|
||
|
||
if (pfs == "FAIL"):
|
||
worksheet.write(row, col, pfs, red); col += 1
|
||
else:
|
||
worksheet.write(row, col, pfs, green); col += 1
|
||
worksheet.write(row, col, time_stamp, green); col += 1
|
||
if (_bw != bw):
|
||
err = "ERROR: Requested bandwidth: %s != station's reported bandwidth: %s. "%(bw, _bw)
|
||
e_tot += err
|
||
logg.info(err)
|
||
csv.write(err)
|
||
csvs.write(err)
|
||
if (_nss != n):
|
||
err = "ERROR: Station NSS: %s != configured: %s. "%(_nss, n)
|
||
logg.info(err)
|
||
csv.write(err)
|
||
csvs.write(err)
|
||
e_tot += err
|
||
|
||
if (e_tot == ""):
|
||
e_w_tot = e_tot + w_tot
|
||
if(w_tot == ""):
|
||
worksheet.write(row, col, e_w_tot, green_left); col += 1
|
||
else:
|
||
worksheet.write(row, col, e_w_tot, orange_left); col += 1
|
||
|
||
else:
|
||
e_w_tot = e_tot + w_tot
|
||
worksheet.write(row, col, e_w_tot, red_left); col += 1
|
||
row += 1
|
||
|
||
csv.write("\n");
|
||
csv.flush()
|
||
|
||
csvs.write("\n");
|
||
csvs.flush()
|
||
|
||
# write out the data and exit on error : error takes presidence over failure
|
||
if (e_tot != ""):
|
||
if(args.exit_on_error):
|
||
logg.info("EXITING ON ERROR, exit_on_error err: {} ".format(e_tot))
|
||
if bool(email_dicts):
|
||
for email_dict in email_dicts:
|
||
try:
|
||
logg.info("Sending Email ")
|
||
subject = "Lanforge: Error {}".format(outfile_xlsx)
|
||
body = "Lanforeg: Error: AP: {} Channel: {} NSS: {} BW: {} TX-Power {}, pfs: {} time_stamp: {} {}".format(args.ap, ch, n, bw, tx, pfs, time_stamp, outfile_xlsx)
|
||
email_out = subprocess.run(["./lf_mail.py", "--user", email_dict['user'] , "--passwd", email_dict['passwd'], "--to",email_dict['to'] ,
|
||
"--subject", subject, "--body", body , "--smtp", email_dict['smtp'], "--port", email_dict['port'] ], capture_output=cap_ctl_out, check=True)
|
||
pss = email_out.stdout.decode('utf-8','ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Unable to send email smtp {} port {} error code: {} output {}".format(email_dict['smtp'],email_dict['port'],process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
|
||
# write out the data and exit on failure
|
||
if (pf == 0):
|
||
if(args.exit_on_fail):
|
||
if(e_tot != ""):
|
||
logg.info("EXITING ON FAILURE as a result of err {}".format(e_tot))
|
||
else:
|
||
logg.info("EXITING ON FAILURE, exit_on_fail set there was no err ")
|
||
if bool(email_dicts):
|
||
for email_dict in email_dicts:
|
||
try:
|
||
logg.info("Sending Email ")
|
||
subject = "Lanforge: Failure Found {}".format(outfile_xlsx)
|
||
body = "Lanforge: Failure Found: AP: {} Channel: {} NSS: {} BW: {} TX-Power {}, pfs: {} time_stamp: {} {}".format(args.ap,ch, n, bw, tx, pfs, time_stamp,outfile_xlsx)
|
||
email_out =subprocess.run(["./lf_mail.py", "--user", email_dict['user'] , "--passwd", email_dict['passwd'], "--to",email_dict['to'] ,
|
||
"--subject", subject, "--body", body , "--smtp", email_dict['smtp'], "--port", email_dict['port'] ], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = email_out.stdout.decode('utf-8','ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Unable to send email smtp {} port {} error code: {} output {}".format(email_dict['smtp'],email_dict['port'],process_error.returncode, process_error.output))
|
||
|
||
exit_test(workbook)
|
||
|
||
|
||
if bool(email_dicts):
|
||
for email_dict in email_dicts:
|
||
try:
|
||
logg.info("Sending Email ")
|
||
subject = "Lanforge Test Compete {}".format(outfile_xlsx)
|
||
body = "Lanforeg Test Complete : AP: {} time_stamp: {} {}".format(args.ap, time_stamp, outfile_xlsx)
|
||
email_out = subprocess.run(["./lf_mail.py", "--user", email_dict['user'] , "--passwd", email_dict['passwd'], "--to",email_dict['to'] ,
|
||
"--subject", subject, "--body", body , "--smtp", email_dict['smtp'], "--port", email_dict['port'] ], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = email_out.stdout.decode('utf-8','ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Unable to send email smtp {} port {} error code: {} output {}".format(email_dict['smtp'],email_dict['port'],process_error.returncode, process_error.output))
|
||
|
||
|
||
workbook.close()
|
||
|
||
# check if keeping the existing state
|
||
if(args.keep_state):
|
||
logg.info("9800/3504 flag --keep_state set thus keeping state")
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: advanced")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "advanced","--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: summary")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "summary","--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
exit_test(workbook)
|
||
|
||
# Set things back to defaults
|
||
# remove the station
|
||
if(args.cleanup):
|
||
logg.info("--cleanup set Deleting all stations on radio {}".format(args.radio))
|
||
subprocess.run(["./lf_associate_ap.pl", "--action", "del_all_phy","--port_del", args.radio], timeout=20, capture_output=True)
|
||
|
||
# Disable AP, apply settings, enable AP
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: disable AP {}".format(args.ap))
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable", "--series" , args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
if args.series == "9800":
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: no_wlan_wireless_tag_policy")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "no_wlan_wireless_tag_policy","--series",args.series,"--port", args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: delete_wlan")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "delete_wlan","--series",args.series, "--wlan", args.wlan, "--wlanID", args.wlanID,"--port",args.port,"--prompt",args.prompt], capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: disable_network_5ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable_network_5ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: disable_network_24ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "disable_network_24ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
else:
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11a disable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11a disable network","--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11b disable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11b disable network","--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
if (tx != "NA"):
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: txPower tx 1")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "txPower", "--value", "1", "--series" , args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
# NSS is set on the station earlier...
|
||
if (ch != "NA"):
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: channel 36")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "channel", "--value", "36", "--series" , args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
if (bw != "NA"):
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: bandwidth 20")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "bandwidth", "--value", "20", "--series" , args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
if args.series == "9800":
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: enable_network_5ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable_network_5ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: enable_network_24ghz")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable_network_24ghz","--series",args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800 cisco_wifi_ctl.py: auto")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "auto","--series",args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
#exit_test(workbook)
|
||
|
||
else:
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11a enable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11a enable network","--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("3504 cisco_wifi_ctl.py: config 802.11b enable network")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "cmd", "--value", "config 802.11b enable network","--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: enable")
|
||
ctl_output = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "enable", "--series" , args.series,"--port", args.port,"--prompt",args.prompt],capture_output=cap_ctl_out, check=True)
|
||
if cap_ctl_out:
|
||
pss = ctl_output.stdout.decode('utf-8', 'ignore')
|
||
logg.info(pss)
|
||
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
# Remove LANforge traffic connection
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "set_cx_state all c-udp-power DELETED"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "rm_endp c-udp-power-A"], capture_output=True);
|
||
subprocess.run(["./lf_firemod.pl", "--manager", lfmgr, "--resource", lfresource, "--action", "do_cmd",
|
||
"--cmd", "rm_endp c-udp-power-B"], capture_output=True);
|
||
|
||
# Show controller status
|
||
try:
|
||
logg.info("9800/3504 cisco_wifi_ctl.py: advanced")
|
||
advanced = subprocess.run(["./cisco_wifi_ctl.py", "--scheme", scheme, "-d", args.dest, "-u", args.user, "-p", args.passwd, "-a", args.ap, "--band", band,
|
||
"--action", "advanced", "--series" , args.series,"--port", args.port,"--prompt",args.prompt], capture_output=True, check=True)
|
||
pss = advanced.stdout.decode('utf-8', 'ignore');
|
||
logg.info(pss)
|
||
except subprocess.CalledProcessError as process_error:
|
||
logg.info("Controller unable to commicate to AP or unable to communicate to controller error code: {} output {}".format(process_error.returncode, process_error.output))
|
||
exit_test(workbook)
|
||
|
||
|
||
# ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
|
||
if __name__ == '__main__':
|
||
main()
|
||
print("Summary results stored in %s, full results in %s, xlsx file in %s"%(outfile, full_outfile, outfile_xlsx))
|
||
|
||
####
|
||
####
|
||
####
|