mirror of
https://github.com/Telecominfraproject/wlan-testing.git
synced 2025-11-01 19:37:54 +00:00
added teardown in 2.x setup profiles, attached logread output in teardown
Signed-off-by: shivamcandela <shivam.thakur@candelatech.com>
This commit is contained in:
shivamcandela
@@ -81,6 +81,7 @@ def setup_profiles(request, setup_controller, testbed, get_equipment_id, fixture
|
||||
get_markers, create_lanforge_chamberview_dut, lf_tools,
|
||||
get_security_flags, get_configuration, radius_info, get_apnos,
|
||||
radius_accounting_info)
|
||||
|
||||
yield return_var
|
||||
|
||||
|
||||
|
||||
@@ -65,338 +65,342 @@ class Fixtures_2x:
|
||||
def setup_profiles(self, request, param, setup_controller, testbed, get_equipment_id,
|
||||
instantiate_profile, get_markers, create_lanforge_chamberview_dut, lf_tools,
|
||||
get_security_flags, get_configuration, radius_info, get_apnos, radius_accounting_info):
|
||||
print("inside conftest_2x")
|
||||
if not request.config.getoption("1.x"):
|
||||
instantiate_profile_obj = instantiate_profile(sdk_client=setup_controller)
|
||||
print("garbage")
|
||||
print(1, instantiate_profile_obj.sdk_client)
|
||||
vlan_id, mode = 0, 0
|
||||
parameter = dict(param)
|
||||
print("hola", parameter)
|
||||
test_cases = {}
|
||||
profile_data = {}
|
||||
|
||||
if parameter['mode'] not in ["BRIDGE", "NAT", "VLAN"]:
|
||||
print("Invalid Mode: ", parameter['mode'])
|
||||
return test_cases
|
||||
instantiate_profile_obj = instantiate_profile(sdk_client=setup_controller)
|
||||
print("garbage")
|
||||
print(1, instantiate_profile_obj.sdk_client)
|
||||
vlan_id, mode = 0, 0
|
||||
parameter = dict(param)
|
||||
print("hola", parameter)
|
||||
test_cases = {}
|
||||
profile_data = {}
|
||||
|
||||
instantiate_profile_obj.set_radio_config()
|
||||
if parameter['mode'] not in ["BRIDGE", "NAT", "VLAN"]:
|
||||
print("Invalid Mode: ", parameter['mode'])
|
||||
return test_cases
|
||||
|
||||
if parameter['mode'] == "NAT":
|
||||
mode = "NAT"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
vlan_id = 1
|
||||
if parameter['mode'] == "BRIDGE":
|
||||
mode = "BRIDGE"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
vlan_id = 1
|
||||
if parameter['mode'] == "VLAN":
|
||||
mode = "VLAN"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
profile_data["ssid"] = {}
|
||||
instantiate_profile_obj.set_radio_config()
|
||||
|
||||
for i in parameter["ssid_modes"]:
|
||||
profile_data["ssid"][i] = []
|
||||
for j in range(len(parameter["ssid_modes"][i])):
|
||||
data = parameter["ssid_modes"][i][j]
|
||||
profile_data["ssid"][i].append(data)
|
||||
lf_dut_data = []
|
||||
for mode in profile_data['ssid']:
|
||||
if mode == "open":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'none'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa_2g"] = False
|
||||
if mode == "wpa":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa_2g"] = False
|
||||
if mode == "wpa2_personal":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk2'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa_wpa2_personal_mixed":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk-mixed'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa3_personal":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'sae'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa3_personal_mixed":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'sae-mixed'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
# EAP SSID Modes
|
||||
if mode == "wpa2_enterprise":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'wpa2'
|
||||
RADIUS_SERVER_DATA = radius_info
|
||||
RADIUS_ACCOUNTING_DATA = radius_accounting_info
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j, radius=True,
|
||||
radius_auth_data=RADIUS_SERVER_DATA,
|
||||
radius_accounting_data=RADIUS_ACCOUNTING_DATA)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
ap_ssh = get_apnos(get_configuration['access_point'][0], pwd="../libs/apnos/", sdk="2.x")
|
||||
if parameter['mode'] == "NAT":
|
||||
mode = "NAT"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
vlan_id = 1
|
||||
if parameter['mode'] == "BRIDGE":
|
||||
mode = "BRIDGE"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
vlan_id = 1
|
||||
if parameter['mode'] == "VLAN":
|
||||
mode = "VLAN"
|
||||
instantiate_profile_obj.set_mode(mode=mode)
|
||||
profile_data["ssid"] = {}
|
||||
|
||||
for i in parameter["ssid_modes"]:
|
||||
profile_data["ssid"][i] = []
|
||||
for j in range(len(parameter["ssid_modes"][i])):
|
||||
data = parameter["ssid_modes"][i][j]
|
||||
profile_data["ssid"][i].append(data)
|
||||
lf_dut_data = []
|
||||
for mode in profile_data['ssid']:
|
||||
if mode == "open":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'none'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa_2g"] = False
|
||||
if mode == "wpa":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa_2g"] = False
|
||||
if mode == "wpa2_personal":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk2'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa_wpa2_personal_mixed":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'psk-mixed'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa3_personal":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'sae'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
if mode == "wpa3_personal_mixed":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'sae-mixed'
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
# EAP SSID Modes
|
||||
if mode == "wpa2_enterprise":
|
||||
for j in profile_data["ssid"][mode]:
|
||||
if mode in get_markers.keys() and get_markers[mode]:
|
||||
try:
|
||||
if j["appliedRadios"].__contains__("2G"):
|
||||
lf_dut_data.append(j)
|
||||
if j["appliedRadios"].__contains__("5G"):
|
||||
lf_dut_data.append(j)
|
||||
j["appliedRadios"] = list(set(j["appliedRadios"]))
|
||||
j['security'] = 'wpa2'
|
||||
RADIUS_SERVER_DATA = radius_info
|
||||
RADIUS_ACCOUNTING_DATA = radius_accounting_info
|
||||
creates_profile = instantiate_profile_obj.add_ssid(ssid_data=j, radius=True,
|
||||
radius_auth_data=RADIUS_SERVER_DATA,
|
||||
radius_accounting_data=RADIUS_ACCOUNTING_DATA)
|
||||
test_cases["wpa_2g"] = True
|
||||
except Exception as e:
|
||||
print(e)
|
||||
test_cases["wpa2_personal"] = False
|
||||
ap_ssh = get_apnos(get_configuration['access_point'][0], pwd="../libs/apnos/", sdk="2.x")
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
if connected == False:
|
||||
pytest.exit("AP is disconnected from UC Gateway")
|
||||
if latest != active:
|
||||
allure.attach(name="FAIL : ubus call ucentral status: ",
|
||||
body="connected: " + str(connected) + "\nlatest: " + str(latest) + "\nactive: " + str(active))
|
||||
ap_logs = ap_ssh.logread()
|
||||
allure.attach(body=ap_logs, name="FAILURE: AP LOgs: ")
|
||||
pytest.fail("AP is disconnected from UC Gateway")
|
||||
instantiate_profile_obj.push_config(serial_number=get_equipment_id[0])
|
||||
time_1 = time.time()
|
||||
config = json.loads(str(instantiate_profile_obj.base_profile_config).replace(" ", "").replace("'", '"'))
|
||||
config["uuid"] = 0
|
||||
ap_config_latest = ap_ssh.get_uc_latest_config()
|
||||
try:
|
||||
ap_config_latest["uuid"] = 0
|
||||
except Exception as e:
|
||||
print(e)
|
||||
pass
|
||||
x = 1
|
||||
old_config = latest
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
while old_config == latest:
|
||||
time.sleep(5)
|
||||
x += 1
|
||||
print("old config: ", old_config)
|
||||
print("latest: ", latest)
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
if connected == False:
|
||||
pytest.exit("AP is disconnected from UC Gateway")
|
||||
if latest != active:
|
||||
allure.attach(name="FAIL : ubus call ucentral status: ",
|
||||
body="connected: " + str(connected) + "\nlatest: " + str(latest) + "\nactive: " + str(active))
|
||||
ap_logs = ap_ssh.logread()
|
||||
allure.attach(body=ap_logs, name="FAILURE: AP LOgs: ")
|
||||
pytest.fail("AP is disconnected from UC Gateway")
|
||||
instantiate_profile_obj.push_config(serial_number=get_equipment_id[0])
|
||||
time_1 = time.time()
|
||||
config = json.loads(str(instantiate_profile_obj.base_profile_config).replace(" ", "").replace("'", '"'))
|
||||
config["uuid"] = 0
|
||||
ap_config_latest = ap_ssh.get_uc_latest_config()
|
||||
try:
|
||||
ap_config_latest["uuid"] = 0
|
||||
except Exception as e:
|
||||
print(e)
|
||||
pass
|
||||
x = 1
|
||||
old_config = latest
|
||||
if x == 19:
|
||||
break
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
x = 1
|
||||
while active != latest:
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
while old_config == latest:
|
||||
time.sleep(5)
|
||||
x += 1
|
||||
print("old config: " , old_config)
|
||||
print("latest: " , latest)
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
if x == 19:
|
||||
break
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
x = 1
|
||||
while active != latest:
|
||||
connected, latest, active = ap_ssh.get_ucentral_status()
|
||||
time.sleep(10)
|
||||
x += 1
|
||||
print("active: ", active)
|
||||
print("latest: ", latest)
|
||||
if x == 19:
|
||||
break
|
||||
if x < 19:
|
||||
print("Config properly applied into AP", config)
|
||||
time.sleep(10)
|
||||
x += 1
|
||||
print("active: ", active)
|
||||
print("latest: ", latest)
|
||||
if x == 19:
|
||||
break
|
||||
if x < 19:
|
||||
print("Config properly applied into AP", config)
|
||||
|
||||
time_2 = time.time()
|
||||
time_interval = time_2 - time_1
|
||||
allure.attach(name="Time Took to apply Config: " + str(time_interval), body="")
|
||||
time_2 = time.time()
|
||||
time_interval = time_2 - time_1
|
||||
allure.attach(name="Time Took to apply Config: " + str(time_interval), body="")
|
||||
|
||||
ap_config_latest = ap_ssh.get_uc_latest_config()
|
||||
ap_config_latest["uuid"] = 0
|
||||
|
||||
ap_config_active = ap_ssh.get_uc_active_config()
|
||||
ap_config_active["uuid"] = 0
|
||||
x = 1
|
||||
|
||||
while ap_config_active != ap_config_latest:
|
||||
time.sleep(5)
|
||||
x += 1
|
||||
ap_config_latest = ap_ssh.get_uc_latest_config()
|
||||
ap_config_latest["uuid"] = 0
|
||||
|
||||
ap_config_active = ap_ssh.get_uc_active_config()
|
||||
print("latest config: ", ap_config_latest)
|
||||
print("Active config: ", ap_config_active)
|
||||
ap_config_active["uuid"] = 0
|
||||
x = 1
|
||||
if x == 19:
|
||||
break
|
||||
if x < 19:
|
||||
print("AP is Broadcasting Applied Config")
|
||||
allure.attach(name="Success : Active Config in AP: ", body=str(ap_config_active))
|
||||
|
||||
while ap_config_active != ap_config_latest:
|
||||
time.sleep(5)
|
||||
x += 1
|
||||
ap_config_latest = ap_ssh.get_uc_latest_config()
|
||||
ap_config_latest["uuid"] = 0
|
||||
|
||||
ap_config_active = ap_ssh.get_uc_active_config()
|
||||
print("latest config: ", ap_config_latest)
|
||||
print("Active config: ", ap_config_active)
|
||||
ap_config_active["uuid"] = 0
|
||||
if x == 19:
|
||||
break
|
||||
if x < 19:
|
||||
print("AP is Broadcasting Applied Config")
|
||||
allure.attach(name="Success : Active Config in AP: ", body=str(ap_config_active))
|
||||
|
||||
else:
|
||||
print("AP is Not Broadcasting Applied Config")
|
||||
allure.attach(name="Failed to Apply Config : Active Config in AP : ", body=str(ap_config_active))
|
||||
|
||||
ap_logs = ap_ssh.logread()
|
||||
allure.attach(body=ap_logs, name="AP LOgs: ")
|
||||
ap_wifi_data = ap_ssh.get_interface_details()
|
||||
idx_mapping = {}
|
||||
ssid_data = []
|
||||
ap_interfaces = list(ap_wifi_data.keys())
|
||||
for interface in range(len(ap_interfaces)):
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "none":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=OPEN" +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk-mixed":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA|WPA2" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk2":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA2" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + str(ap_wifi_data[ap_interfaces[interface]][3][0]).lower()
|
||||
]
|
||||
print(ssid)
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "sae":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA3" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "sae-mixed":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA3" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "wpa2":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=EAP-TTLS" +
|
||||
" bssid=" + str(ap_wifi_data[ap_interfaces[interface]][3][0]).lower()
|
||||
]
|
||||
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
ssid_data.append(ssid)
|
||||
lf_tools.ssid_list.append(ap_wifi_data[ap_interfaces[interface]][0])
|
||||
lf_tools.dut_idx_mapping = idx_mapping
|
||||
print(ssid_data)
|
||||
lf_tools.update_ssid(ssid_data=ssid_data)
|
||||
return test_cases
|
||||
else:
|
||||
return False
|
||||
print("AP is Not Broadcasting Applied Config")
|
||||
allure.attach(name="Failed to Apply Config : Active Config in AP : ", body=str(ap_config_active))
|
||||
|
||||
ap_logs = ap_ssh.logread()
|
||||
allure.attach(body=ap_logs, name="AP LOgs: ")
|
||||
ap_wifi_data = ap_ssh.get_interface_details()
|
||||
idx_mapping = {}
|
||||
ssid_data = []
|
||||
ap_interfaces = list(ap_wifi_data.keys())
|
||||
for interface in range(len(ap_interfaces)):
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "none":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=OPEN" +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk-mixed":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA|WPA2" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "psk2":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA2" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + str(ap_wifi_data[ap_interfaces[interface]][3][0]).lower()
|
||||
]
|
||||
print(ssid)
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "sae":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA3" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "sae-mixed":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=WPA3" +
|
||||
" password=" + ap_wifi_data[ap_interfaces[interface]][2] +
|
||||
" bssid=" + ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
if ap_wifi_data[ap_interfaces[interface]][1] == "wpa2":
|
||||
ssid = ["ssid_idx=" + str(interface) +
|
||||
" ssid=" + ap_wifi_data[ap_interfaces[interface]][0] +
|
||||
" security=EAP-TTLS" +
|
||||
" bssid=" + str(ap_wifi_data[ap_interfaces[interface]][3][0]).lower()
|
||||
]
|
||||
|
||||
idx_mapping[str(interface)] = [ap_wifi_data[ap_interfaces[interface]][0],
|
||||
ap_wifi_data[ap_interfaces[interface]][2],
|
||||
ap_wifi_data[ap_interfaces[interface]][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][1],
|
||||
ap_wifi_data[ap_interfaces[interface]][3][0]
|
||||
]
|
||||
# pass
|
||||
ssid_data.append(ssid)
|
||||
lf_tools.ssid_list.append(ap_wifi_data[ap_interfaces[interface]][0])
|
||||
lf_tools.dut_idx_mapping = idx_mapping
|
||||
print(ssid_data)
|
||||
lf_tools.update_ssid(ssid_data=ssid_data)
|
||||
|
||||
def teardown_session():
|
||||
ap_logs = ap_ssh.logread()
|
||||
allure.attach(body=ap_logs, name="AP Logs after test completion")
|
||||
print("\nTeardown")
|
||||
|
||||
request.addfinalizer(teardown_session)
|
||||
return test_cases
|
||||
|
||||
Reference in New Issue
Block a user