ucentral vlan config fix

Signed-off-by: shivamcandela <shivam.thakur@candelatech.com>

libs/controller/ucentral_ctlr.py

@@ -243,6 +243,22 @@ class UProfileUtility:
             del self.base_profile_config['interfaces'][1]
             self.base_profile_config['interfaces'][0]['ssids'] = []
             self.base_profile_config['interfaces'] = []
+            wan_section_vlan = {
+                "name": "WAN",
+                "role": "upstream",
+                "services": ["lldp"],
+                "ethernet": [
+                    {
+                        "select-ports": [
+                            "WAN*"
+                        ]
+                    }
+                ],
+                "ipv4": {
+                    "addressing": "dynamic"
+                }
+            }
+            self.base_profile_config['interfaces'].append(wan_section_vlan)
         else:
             print("Invalid Mode")
             return 0
@@ -310,10 +326,6 @@ class UProfileUtility:
                 self.base_profile_config['interfaces'].append(vlan_section)
                 print(vlan_section)
                 vsection = 0
-            # Add to the ssid section
-            # print(self.base_profile_config)
-            # self.base_profile_config['interfaces'][vsection]['vlan'] = {'id': int(vid)}
-            # self.base_profile_config['interfaces'][vsection]['ssids'].append(ssid_info)
         else:
             print("invalid mode")
             pytest.exit("invalid Operating Mode")
@@ -328,17 +340,24 @@ class UProfileUtility:
                              verify=False, timeout=100)
         self.sdk_client.check_response("POST", resp, self.sdk_client.make_headers(), basic_cfg_str, uri)
         print(resp.url)
-        # resp.close()()
+        resp.close()()
         print(resp)
 
 
-# controller = {
-#     'url': 'https://sec-ucentral-qa01.cicd.lab.wlan.tip.build:16001',  # API base url for the controller
-#     'username': "tip@ucentral.com",
-#     'password': 'openwifi',
-# }
-# obj = UController(controller_data=controller)
-#
-# print(obj.get_devices())
-#
-# obj.logout()
+if __name__ == '__main__':
+
+
+    controller = {
+    'url': 'https://sec-ucentral-qa01.cicd.lab.wlan.tip.build:16001',  # API base url for the controller
+    'username': "tip@ucentral.com",
+    'password': 'openwifi',
+    }
+    obj = UController(controller_data=controller)
+    profile = UProfileUtility(sdk_client=obj)
+    profile.set_mode(mode="VLAN")
+    profile.set_radio_config()
+    ssid = {"ssid_name": "ssid_wpa2_2g_nat", "appliedRadios": ["2G"], "security": "psk", "security_key": "something", "vlan": 100}
+    profile.add_ssid(ssid_data=ssid)
+    # profile.push_config(serial_number="903cb39d6918")
+    # print(obj.get_devices())
+    obj.logout()

tests/conftest.py

@@ -278,7 +278,6 @@ def setup_controller(request, get_configuration, test_access_point):
 
             request.addfinalizer(teardown_ucontroller)
 
-
     except Exception as e:
         print(e)
         allure.attach(body=str(e), name="Controller Instantiation Failed: ")
@@ -290,44 +289,56 @@ def setup_controller(request, get_configuration, test_access_point):
 @pytest.fixture(scope="session")
 def instantiate_firmware(request, setup_controller, get_configuration):
     """sets up firmware utility and yields the object for firmware upgrade"""
-    firmware_client_obj = []
+    if request.config.getoption("--1.x"):
+        firmware_client_obj = []
 
-    for access_point_info in get_configuration['access_point']:
-        version = access_point_info["version"]
-        if request.config.getini("build").__contains__("https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/"):
-            version = request.config.getini("build")
-        firmware_client = FirmwareUtility(sdk_client=setup_controller,
-                                          model=access_point_info["model"],
-                                          version_url=version)
-        firmware_client_obj.append(firmware_client)
-    yield firmware_client_obj
+        for access_point_info in get_configuration['access_point']:
+            version = access_point_info["version"]
+            if request.config.getini("build").__contains__("https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/"):
+                version = request.config.getini("build")
+            firmware_client = FirmwareUtility(sdk_client=setup_controller,
+                                              model=access_point_info["model"],
+                                              version_url=version)
+            firmware_client_obj.append(firmware_client)
+        yield firmware_client_obj
+    else:
+        # 2.x
+        pass
 
 
 @pytest.fixture(scope="session")
-def get_latest_firmware(instantiate_firmware):
+def get_latest_firmware(request, instantiate_firmware):
     """yields the list of firmware version"""
-    fw_version_list = []
-    try:
-
-        for fw_obj in instantiate_firmware:
-            latest_firmware = fw_obj.get_fw_version()
-            latest_firmware = latest_firmware.replace(".tar.gz", "")
-            fw_version_list.append(latest_firmware)
-    except Exception as e:
-        print(e)
+    if request.config.getoption("--1.x"):
         fw_version_list = []
+        try:
 
-    yield fw_version_list
+            for fw_obj in instantiate_firmware:
+                latest_firmware = fw_obj.get_fw_version()
+                latest_firmware = latest_firmware.replace(".tar.gz", "")
+                fw_version_list.append(latest_firmware)
+        except Exception as e:
+            print(e)
+            fw_version_list = []
+
+        yield fw_version_list
+    else:
+        # 2.x
+        pass
 
 
 @pytest.fixture(scope="session")
-def upload_firmware(should_upload_firmware, instantiate_firmware):
+def upload_firmware(request, should_upload_firmware, instantiate_firmware):
     """yields the firmware_id that is uploaded to cloud"""
-    firmware_id_list = []
-    for i in range(0, len(instantiate_firmware)):
-        firmware_id = instantiate_firmware[i].upload_fw_on_cloud(force_upload=should_upload_firmware)
-        firmware_id_list.append(firmware_id)
-    yield firmware_id_list
+    if request.config.getoption("--1.x"):
+        firmware_id_list = []
+        for i in range(0, len(instantiate_firmware)):
+            firmware_id = instantiate_firmware[i].upload_fw_on_cloud(force_upload=should_upload_firmware)
+            firmware_id_list.append(firmware_id)
+        yield firmware_id_list
+    else:
+        # 2.x release
+        yield True
 
 
 @pytest.fixture(scope="session")
@@ -335,85 +346,101 @@ def upgrade_firmware(request, instantiate_firmware, get_equipment_id, check_ap_f
                      should_upgrade_firmware, should_upload_firmware, get_apnos, get_configuration):
     """yields the status of upgrade of firmware. waits for 300 sec after each upgrade request"""
     print(should_upgrade_firmware, should_upload_firmware)
-    status_list = []
-    active_fw_list = []
-    try:
-        for access_point in get_configuration['access_point']:
-            ap_ssh = get_apnos(access_point)
-            active_fw = ap_ssh.get_active_firmware()
-            active_fw_list.append(active_fw)
-    except Exception as e:
-        print(e)
+    if request.config.getoption("--1.x"):
+        status_list = []
         active_fw_list = []
-    print(active_fw_list, get_latest_firmware)
-    if get_latest_firmware != active_fw_list:
-        if request.config.getoption("--skip-upgrade"):
-            status = "skip-upgrade"
-            status_list.append(status)
-        else:
-
-            for i in range(0, len(instantiate_firmware)):
-                status = instantiate_firmware[i].upgrade_fw(equipment_id=get_equipment_id[i], force_upload=True,
-                                                            force_upgrade=should_upgrade_firmware)
-                allure.attach(name="Firmware Upgrade Request", body=str(status))
+        try:
+            for access_point in get_configuration['access_point']:
+                ap_ssh = get_apnos(access_point)
+                active_fw = ap_ssh.get_active_firmware()
+                active_fw_list.append(active_fw)
+        except Exception as e:
+            print(e)
+            active_fw_list = []
+        print(active_fw_list, get_latest_firmware)
+        if get_latest_firmware != active_fw_list:
+            if request.config.getoption("--skip-upgrade"):
+                status = "skip-upgrade"
                 status_list.append(status)
+            else:
+
+                for i in range(0, len(instantiate_firmware)):
+                    status = instantiate_firmware[i].upgrade_fw(equipment_id=get_equipment_id[i], force_upload=True,
+                                                                force_upgrade=should_upgrade_firmware)
+                    allure.attach(name="Firmware Upgrade Request", body=str(status))
+                    status_list.append(status)
+        else:
+            if should_upgrade_firmware:
+                for i in range(0, len(instantiate_firmware)):
+                    status = instantiate_firmware[i].upgrade_fw(equipment_id=get_equipment_id[i],
+                                                                force_upload=should_upload_firmware,
+                                                                force_upgrade=should_upgrade_firmware)
+                    allure.attach(name="Firmware Upgrade Request", body=str(status))
+                    status_list.append(status)
+            else:
+                status = "skip-upgrade Version Already Available"
+                status_list.append(status)
+        yield status_list
     else:
-        if should_upgrade_firmware:
-            for i in range(0, len(instantiate_firmware)):
-                status = instantiate_firmware[i].upgrade_fw(equipment_id=get_equipment_id[i],
-                                                            force_upload=should_upload_firmware,
-                                                            force_upgrade=should_upgrade_firmware)
-                allure.attach(name="Firmware Upgrade Request", body=str(status))
-                status_list.append(status)
-        else:
-            status = "skip-upgrade Version Already Available"
-            status_list.append(status)
-    yield status_list
+        # 2.x release
+        pass
 
 
 @pytest.fixture(scope="session")
-def check_ap_firmware_cloud(setup_controller, get_equipment_id):
+def check_ap_firmware_cloud(request, setup_controller, get_equipment_id):
     """yields the active version of firmware on cloud"""
-    ap_fw_list = []
-    for i in get_equipment_id:
-        ap_fw_list.append(setup_controller.get_ap_firmware_old_method(equipment_id=i))
-    yield ap_fw_list
+    if request.config.getoption("--1.x"):
+        ap_fw_list = []
+        for i in get_equipment_id:
+            ap_fw_list.append(setup_controller.get_ap_firmware_old_method(equipment_id=i))
+        yield ap_fw_list
+    else:
+        # 2.x
+        pass
 
 
 @pytest.fixture(scope="session")
-def check_ap_firmware_ssh(get_configuration):
+def check_ap_firmware_ssh(get_configuration, request):
     """yields the active version of firmware on ap"""
-    active_fw_list = []
-    try:
-        for access_point in get_configuration['access_point']:
-            ap_ssh = APNOS(access_point)
-            active_fw = ap_ssh.get_active_firmware()
-            active_fw_list.append(active_fw)
-    except Exception as e:
-        print(e)
+    if request.config.getoption("--1.x"):
         active_fw_list = []
-    yield active_fw_list
+        try:
+            for access_point in get_configuration['access_point']:
+                ap_ssh = APNOS(access_point)
+                active_fw = ap_ssh.get_active_firmware()
+                active_fw_list.append(active_fw)
+        except Exception as e:
+            print(e)
+            active_fw_list = []
+        yield active_fw_list
+    else:
+        # 2.x
+        pass
 
 
 @pytest.fixture(scope="session")
-def setup_test_run(setup_controller, upgrade_firmware, get_configuration, get_equipment_id, get_latest_firmware,
+def setup_test_run(setup_controller, request, upgrade_firmware, get_configuration,
+                   get_equipment_id, get_latest_firmware,
                    get_apnos):
     """used to upgrade the firmware on AP and should be called on each test case on a module level"""
-
-    active_fw_list = []
-    try:
-        for access_point in get_configuration['access_point']:
-            ap_ssh = get_apnos(access_point)
-            active_fw = ap_ssh.get_active_firmware()
-            active_fw_list.append(active_fw)
-    except Exception as e:
-        print(e)
+    if request.config.getoption("--1.x"):
         active_fw_list = []
-    print(active_fw_list, get_latest_firmware)
-    if active_fw_list == get_latest_firmware:
-        yield True
+        try:
+            for access_point in get_configuration['access_point']:
+                ap_ssh = get_apnos(access_point)
+                active_fw = ap_ssh.get_active_firmware()
+                active_fw_list.append(active_fw)
+        except Exception as e:
+            print(e)
+            active_fw_list = []
+        print(active_fw_list, get_latest_firmware)
+        if active_fw_list == get_latest_firmware:
+            yield True
+        else:
+            pytest.exit("AP is not Upgraded tp Target Firmware versions")
     else:
-        pytest.exit("AP is not Upgraded tp Target Firmware versions")
+        # 2.x
+        pass
 
 
 """
@@ -565,11 +592,12 @@ def create_lanforge_chamberview_dut(get_configuration, testbed):
                 testbed=testbed, access_point_data=get_configuration["access_point"])
     yield True
 
+
 @pytest.fixture(scope="session")
 def lf_tools(get_configuration, testbed):
     """ Create a DUT on LANforge"""
     obj = ChamberView(lanforge_data=get_configuration["traffic_generator"]["details"],
-                testbed=testbed, access_point_data=get_configuration["access_point"])
+                      testbed=testbed, access_point_data=get_configuration["access_point"])
 
     yield obj
 
@@ -601,6 +629,7 @@ def setup_influx(request, testbed, get_configuration):
     }
     yield influx_params
 
+
 # Need for Perforce Mobile Device Execution
 def pytest_sessionstart(session):
-    session.results = dict()
+    session.results = dict()

tests/e2e/basic/validation_of_operating_modes/bridge_mode/client_connectivity/test_general_security_modes.py

@@ -14,9 +14,9 @@ pytestmark = [pytest.mark.client_connectivity, pytest.mark.bridge, pytest.mark.g
 setup_params_general = {
     "mode": "BRIDGE",
     "ssid_modes": {
-        "open": [{"ssid_name": "ssid_open_2g_br", "appliedRadios": ["2G"], "security_key": "something", },
+        "open": [{"ssid_name": "ssid_open_2g_br", "appliedRadios": ["2G"], "security_key": "something" },
                  {"ssid_name": "ssid_open_5g_br", "appliedRadios": ["5G"],
-                  "security_key": "something", }],
+                  "security_key": "something" }],
         "wpa": [{"ssid_name": "ssid_wpa_2g_br", "appliedRadios": ["2G"], "security_key": "something"},
                 {"ssid_name": "ssid_wpa_5g_br", "appliedRadios": ["5G"],
                  "security_key": "something"}],

tests/e2e/basic/validation_of_operating_modes/nat_mode/client_connectivity/test_general_security_modes.py

@@ -14,7 +14,7 @@ pytestmark = [pytest.mark.client_connectivity, pytest.mark.nat, pytest.mark.gene
 setup_params_general = {
     "mode": "NAT",
     "ssid_modes": {
-        "open": [{"ssid_name": "ssid_shivam", "appliedRadios": ["2G"], "security_key": "something"},
+        "open": [{"ssid_name": "ssid_open_2g_nat", "appliedRadios": ["2G"], "security_key": "something"},
                  {"ssid_name": "ssid_open_5g_nat", "appliedRadios": ["5G"],
                   "security_key": "something"}],
         "wpa": [{"ssid_name": "ssid_wpa_2g_nat", "appliedRadios": ["2G"], "security_key": "something"},
@@ -71,7 +71,6 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_twog, vlan_id=vlan)
 
-       
         assert result
 
     @pytest.mark.open
@@ -80,7 +79,7 @@ class TestNATModeConnectivitySuiteA(object):
     def test_open_ssid_5g(self, get_vif_state, get_lanforge_data, lf_test, test_cases, station_names_fiveg,
                           update_report):
         """Client Connectivity open ssid 5G
-           pytest -m "client_connectivity and bridge and general and open and fiveg"
+           pytest -m "client_connectivity and NAT and general and open and fiveg"
         """
         profile_data = setup_params_general["ssid_modes"]["open"][1]
         ssid_name = profile_data["ssid_name"]
@@ -97,7 +96,6 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_fiveg, vlan_id=vlan)
 
-       
         assert result
 
     @pytest.mark.sanity_light
@@ -107,7 +105,7 @@ class TestNATModeConnectivitySuiteA(object):
     def test_wpa_ssid_2g(self, get_vif_state, get_lanforge_data, update_report,
                          lf_test, test_cases, station_names_twog):
         """Client Connectivity wpa ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa and twog"
+           pytest -m "client_connectivity and NAT and general and wpa and twog"
         """
         profile_data = setup_params_general["ssid_modes"]["wpa"][0]
         ssid_name = profile_data["ssid_name"]
@@ -124,7 +122,6 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_twog, vlan_id=vlan)
 
-        
         assert result
 
     @pytest.mark.sanity_light
@@ -134,7 +131,7 @@ class TestNATModeConnectivitySuiteA(object):
     def test_wpa_ssid_5g(self, get_vif_state, lf_test, update_report, test_cases, station_names_fiveg,
                          get_lanforge_data):
         """Client Connectivity wpa ssid 5G
-           pytest -m "client_connectivity and bridge and general and wpa and fiveg"
+           pytest -m "client_connectivity and NAT and general and wpa and fiveg"
         """
         profile_data = setup_params_general["ssid_modes"]["wpa"][1]
         ssid_name = profile_data["ssid_name"]
@@ -151,7 +148,6 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_fiveg, vlan_id=vlan)
 
-        
         assert result
 
     @pytest.mark.sanity_light
@@ -161,7 +157,7 @@ class TestNATModeConnectivitySuiteA(object):
     def test_wpa2_personal_ssid_2g(self, get_vif_state, get_lanforge_data, lf_test, update_report, test_cases,
                                    station_names_twog):
         """Client Connectivity wpa2_personal ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa2_personal and twog"
+           pytest -m "client_connectivity and NAT and general and wpa2_personal and twog"
         """
         profile_data = setup_params_general["ssid_modes"]["wpa2_personal"][0]
         ssid_name = profile_data["ssid_name"]
@@ -178,7 +174,6 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_twog, vlan_id=vlan)
 
-        
         assert result
 
     @pytest.mark.sanity_light
@@ -189,7 +184,7 @@ class TestNATModeConnectivitySuiteA(object):
                                    station_names_fiveg,
                                    lf_test):
         """Client Connectivity wpa2_personal ssid 5G
-           pytest -m "client_connectivity and bridge and general and wpa2_personal and fiveg"
+           pytest -m "client_connectivity and NAT and general and wpa2_personal and fiveg"
         """
         profile_data = setup_params_general["ssid_modes"]["wpa2_personal"][1]
         ssid_name = profile_data["ssid_name"]
@@ -206,12 +201,11 @@ class TestNATModeConnectivitySuiteA(object):
                                                      passkey=security_key, mode=mode, band=band,
                                                      station_name=station_names_fiveg, vlan_id=vlan)
 
-        
         assert result
 
 
 setup_params_general_two = {
-    "mode": "BRIDGE",
+    "mode": "NAT",
     "ssid_modes": {
         "wpa3_personal": [
             {"ssid_name": "ssid_wpa3_p_2g", "appliedRadios": ["2G"], "security_key": "something"},
@@ -232,7 +226,7 @@ setup_params_general_two = {
 
 
 @pytest.mark.suiteB
-@allure.feature("BRIDGE MODE CLIENT CONNECTIVITY")
+@allure.feature("NAT MODE CLIENT CONNECTIVITY")
 @pytest.mark.parametrize(
     'setup_profiles',
     [setup_params_general_two],
@@ -240,9 +234,9 @@ setup_params_general_two = {
     scope="class"
 )
 @pytest.mark.usefixtures("setup_profiles")
-class TestBridgeModeConnectivitySuiteB(object):
+class TestNATModeConnectivitySuiteB(object):
     """ Client Connectivity SuiteA
-        pytest -m "client_connectivity and bridge and suiteB"
+        pytest -m "client_connectivity and NAT and suiteB"
     """
 
     @pytest.mark.uc_sanity
@@ -253,7 +247,7 @@ class TestBridgeModeConnectivitySuiteB(object):
                                    update_report,
                                    test_cases):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa3_personal and twog"
+           pytest -m "client_connectivity and NAT and general and wpa3_personal and twog"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa3_personal"][0]
         ssid_name = profile_data["ssid_name"]
@@ -279,7 +273,7 @@ class TestBridgeModeConnectivitySuiteB(object):
     def test_wpa3_personal_ssid_5g(self, get_vif_state, station_names_fiveg, get_lanforge_data, lf_test, test_cases,
                                    update_report):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa3_personal and fiveg"
+           pytest -m "client_connectivity and NAT and general and wpa3_personal and fiveg"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa3_personal"][1]
         ssid_name = profile_data["ssid_name"]
@@ -307,7 +301,7 @@ class TestBridgeModeConnectivitySuiteB(object):
                                          update_report,
                                          test_cases):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa3_personal_mixed and twog"
+           pytest -m "client_connectivity and NAT and general and wpa3_personal_mixed and twog"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa3_personal_mixed"][0]
         ssid_name = profile_data["ssid_name"]
@@ -334,7 +328,7 @@ class TestBridgeModeConnectivitySuiteB(object):
                                          test_cases,
                                          update_report):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa3_personal_mixed and fiveg"
+           pytest -m "client_connectivity and NAT and general and wpa3_personal_mixed and fiveg"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa3_personal_mixed"][1]
         ssid_name = profile_data["ssid_name"]
@@ -362,7 +356,7 @@ class TestBridgeModeConnectivitySuiteB(object):
                                        update_report,
                                        test_cases):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa_wpa2_personal_mixed and twog"
+           pytest -m "client_connectivity and NAT and general and wpa_wpa2_personal_mixed and twog"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa_wpa2_personal_mixed"][0]
         ssid_name = profile_data["ssid_name"]
@@ -389,7 +383,7 @@ class TestBridgeModeConnectivitySuiteB(object):
     def test_wpa_wpa2_personal_ssid_5g(self, get_vif_state, station_names_fiveg, get_lanforge_data, lf_test, test_cases,
                                        update_report):
         """Client Connectivity open ssid 2.4G
-           pytest -m "client_connectivity and bridge and general and wpa_wpa2_personal_mixed and fiveg"
+           pytest -m "client_connectivity and NAT and general and wpa_wpa2_personal_mixed and fiveg"
         """
         profile_data = setup_params_general_two["ssid_modes"]["wpa_wpa2_personal_mixed"][1]
         ssid_name = profile_data["ssid_name"]
@@ -411,7 +405,7 @@ class TestBridgeModeConnectivitySuiteB(object):
 
 # WEP Security Feature not available
 # setup_params_wep = {
-#     "mode": "BRIDGE",
+#     "mode": "NAT",
 #     "ssid_modes": {
 #         "wep": [ {"ssid_name": "ssid_wep_2g", "appliedRadios": ["2G"], "default_key_id": 1,
 #                   "wep_key": 1234567890},
@@ -431,7 +425,7 @@ class TestBridgeModeConnectivitySuiteB(object):
 #     scope="class"
 # )
 # @pytest.mark.usefixtures("setup_profiles")
-# class TestBridgeModeWEP(object):
+# class TestNATModeWEP(object):
 #
 #     @pytest.mark.wep
 #     @pytest.mark.twog
@@ -452,12 +446,12 @@ class TestBridgeModeConnectivitySuiteB(object):
 #         if passes:
 #             update_report.update_testrail(case_id=test_cases["2g_wpa_nat"],
 #                                           status_id=1,
-#                                           msg='2G WPA Client Connectivity Passed successfully - bridge mode' + str(
+#                                           msg='2G WPA Client Connectivity Passed successfully - NAT mode' + str(
 #                                               passes))
 #         else:
 #             update_report.update_testrail(case_id=test_cases["2g_wpa_nat"],
 #                                           status_id=5,
-#                                           msg='2G WPA Client Connectivity Failed - bridge mode' + str(
+#                                           msg='2G WPA Client Connectivity Failed - NAT mode' + str(
 #                                               passes))
 #         assert passes
 #
@@ -480,11 +474,11 @@ class TestBridgeModeConnectivitySuiteB(object):
 #         if passes:
 #             update_report.update_testrail(case_id=test_cases["2g_wpa_nat"],
 #                                           status_id=1,
-#                                           msg='2G WPA Client Connectivity Passed successfully - bridge mode' + str(
+#                                           msg='2G WPA Client Connectivity Passed successfully - NAT mode' + str(
 #                                               passes))
 #         else:
 #             update_report.update_testrail(case_id=test_cases["2g_wpa_nat"],
 #                                           status_id=5,
-#                                           msg='2G WPA Client Connectivity Failed - bridge mode' + str(
+#                                           msg='2G WPA Client Connectivity Failed - NAT mode' + str(
 #                                               passes))
 #         assert passes