qca-wifi-7: hostapd: fix missing PSK assignment for EMPSK

When using psk2-radius in combination with enhanced MPSK,
the passphrase was not properly propagated to user scripts
via the ucode interface, because the PSK field was not set
in the connected station context.

This patch fixes that by copying the passphrase into the
psk field.

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -467,9 +471,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -723,8 +724,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request 
+		vendor_elements fils uci_section dynamic_probe_resp
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,8 +778,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,10 +41,6 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
-	emplus-wap380c \
-	emplus-wap385c \
-	emplus-wap386v2 \
-	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -58,7 +54,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
 	sonicfi-rap650c \
-	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -409,10 +404,6 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -421,7 +412,6 @@ $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,11 +18,9 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-		sonicfi,rap630c-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
-		;;
-		sonicfi,rap630w-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
+	sonicfi,rap630c-311g|\
+	sonicfi,rap630w-311g)
+        service_start /usr/sbin/cooling
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,270 +28,143 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
-#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 32
+#define BUF_MAX 8
+#define THERSHOLD_MAX 20
 #define PHY0 0
 #define PHY1 1
-#define NUM_VALUES 4
-
-int load_config_file=0;
-
-//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
-typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
-u32 level_cpu_freq=1008000;
 
-/* default value of wifi thresholds*/
+
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 35, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 30, 50};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 35, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 30, 50};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 20, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 50, 70};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 20, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 50, 70};
 #endif
 
 static char *config_file = NULL;
+char temp[4][BUF_MAX];
 
-typedef struct {
-    int thresholds_high[NUM_VALUES];
-    int thresholds_low[NUM_VALUES];
-    int mitigation[NUM_VALUES];
-    int cpu_freq[NUM_VALUES];
-} WifiConfig;
+#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
 
-WifiConfig wifi2g = {0}, wifi5g = {0};
-
-static void set_cpu_freq (int freq) {
-	FILE * fp;
-	char filename[PATH_MAX];
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_governor error\n");
-	}
-	fprintf(fp, "%s", "userspace");
-	fclose(fp);
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_setspeed error\n");
-	}
-	fprintf(fp, "%d", freq);
-	fclose(fp);
-}
-
-void parse_line(const char* line, const char* key, int* array) {
-	char label[64];
-	int values[NUM_VALUES];
-	int i;
-
-	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
-		for (i = 0; i < NUM_VALUES; ++i) {
-			array[i] = values[i];
-		}
-	}
-}
-
-int load_config() {
-	FILE * fp = fopen(config_file, "r");
-	if (!fp) {
-		ULOG_ERR("open config file error\n");
-		return 1;
-	}
-
-	WifiConfig* current_config = NULL;
-	char line[256];
-
-	while (fgets(line, sizeof(line), fp)) {
-		if (strstr(line, "[wifi2g]")) {
-			current_config = &wifi2g;
-		} else if (strstr(line, "[wifi5g]")) {
-			current_config = &wifi5g;
-		} else if (current_config) {
-			if (strstr(line, "thresholds_high")) {
-				parse_line(line, "thresholds_high", current_config->thresholds_high);
-			} else if (strstr(line, "thresholds_low")) {
-				parse_line(line, "thresholds_low", current_config->thresholds_low);
-			} else if (strstr(line, "mitigation")) {
-				parse_line(line, "mitigation", current_config->mitigation);
-			} else if (strstr(line, "CPU_freq")) {
-				parse_line(line, "CPU_freq", current_config->cpu_freq);
-			}
-		}
-	}
-
-	fclose(fp);
-	set_cpu_freq(wifi5g.cpu_freq[0]);
-
-	return 0;
-}
-
-int load_default_config(){
-	int i=0;
-
-	set_cpu_freq(1008000);
-	for (i = 0; i < NUM_VALUES; i++) {
-		wifi2g.thresholds_high[i]=level_2g_high[i];
-		wifi2g.thresholds_low[i]=level_2g_low[i];
-		wifi2g.mitigation[i]=level_2g_mitigation[i];
-		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
-		wifi5g.thresholds_high[i]=level_5g_high[i];
-		wifi5g.thresholds_low[i]=level_5g_low[i];
-		wifi5g.mitigation[i]=level_5g_mitigation[i];
-		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
-	}
-	return 0;
-
-}
-
-static void write_cur_state (const char *filename, int state) {
+static void write_cur_state (char *filename, int state) {
 	FILE * fp;
 
+	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("open %s file error\n",filename);
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-int read_cur_state(const char *filename, char *buf, size_t buffer) {
-	FILE *fp;
-	
+static void read_cur_state (char *filename, char *buffer) {
+	FILE * fp;
+
 	fp = fopen(filename, "r");
-	if (!fp) {
-		ULOG_ERR("open %s file error\n",filename);
-		return -1;
+	if (!fp){
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
-	if (!fgets(buf, buffer, fp)) {
-		ULOG_ERR("Failed to read %s file\n", filename);
-		fclose(fp);
-		return -1;
+	if (0 == fread(buffer, sizeof(char), 3, fp)) {
+		ULOG_ERR("some kind of error read value\n");
 	}
 	fclose(fp);
-	return 0;
 }
 
-
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	char buffer[BUF_MAX];
+	FILE * fp;
 	int i = 0;
-
-//	ULOG_INFO("=================================\n");
-
-	/* read cpuinfo_cur_freq*/
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
-
-	memset(buffer, 0, BUF_MAX);
-	read_cur_state(filename, buffer, sizeof(buffer));
-//	ULOG_INFO("CPU current frequency: %s\n", buffer);
+	char buffer[BUF_MAX];
 
 	/* get current phy cooling state*/
-	for (i=0; i <= 1; i++) {
+	for (i=0 ; i <= 1; i++ ) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
+		read_cur_state(filename, buffer);
+		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
 	}
 
-	for (i=0; i <= 3; i++) {
-		memset(buffer, 0, BUF_MAX);
+	for (i=0 ; i <= 3; i++ ) {
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
-
-		if (i == 0)
-			w2g_cur_temper=atoi(buffer);
-		else if (i == 3)
-			w5g_cur_temper=atoi(buffer);
-	}
-
-	if (w5g_cur_temper >= 120)
-	{
-		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
-		sync();
-		if ( -1 != system("reboot &") ){
-			printf("sysyem reboot...\n");
+		fp = fopen(filename, "r");
+		if (!fp) {
+			ULOG_ERR("some kind of error open value\n");
 		}
+		memset(temp[i], 0, BUF_MAX);
+		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
+			ULOG_ERR("some kind of error read value\n");
+		}
+		fclose(fp);
+		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
 	}
+
+	w2g_cur_temper=atoi(temp[0]);
+	w5g_cur_temper=atoi(temp[3]);
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level = 0; level <= 3; level++) {
-		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
-//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level=0 ; level<=3 ; level++) {
+		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
+			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
+				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, wifi2g.mitigation[level]);
+				write_cur_state(filename, level_2g_limit[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
-//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
+			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
+				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, wifi5g.mitigation[level]);
+				write_cur_state(filename, level_5g_limit[level]);
 				w5g_threshold_level = level;
-				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
-
 }
 
-
 static void cooling_init() {
-	char filename[PATH_MAX];
-	int i,result=0;
+	char filename[256];
+	int i;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
-
-	if(load_config_file)
-		result = load_config();
-
-	if (result == 1 || load_config_file == 0)
-		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        setting with config file\n");
-	printf("  -d               default setting\n");
+	printf("  -c <file>        config file\n");
+	printf("  -d               debug output\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -312,18 +185,17 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_ERR);
-//	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_INFO);
 
- 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
-			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling set to default value\n");
+			printf("wifi-cooling ulog_threshold set to debug level\n");
+			ulog_threshold(LOG_DEBUG);
 			break;
 		case 'h':
 		default:
@@ -340,4 +212,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           35          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          30          50
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling	 	cooling		cooling		shutdown
+action_info 		0			35	 		50			70			800000
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling		cooling		cooling		shutdown
+action_info 		0			20			30	 		50			800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling	 	cooling		cooling
+action_info 		0			20	 		50			70
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling		cooling		cooling
+action_info 		0			20			50	 		70

feeds/ipq807x_v5.4/hostapd/Makefile

@@ -658,6 +658,7 @@ define Package/wpad/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
 	$(LN) wpad $(1)/usr/sbin/hostapd
 	$(LN) wpad $(1)/usr/sbin/wpa_supplicant
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
 endef
 Package/wpad-basic/install = $(Package/wpad/install)
 Package/wpad-basic-openssl/install = $(Package/wpad/install)

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -468,9 +472,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,8 +725,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -780,8 +780,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
+			ssid.mpsk = config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
+	if (!is_ssid_mpsk(data.iface))
+		return;
+
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
-		if (!is_ssid_mpsk(data.iface))
-			return;
-
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
+		if (data.psk_idx == null)
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -33,11 +33,6 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
-sonicfi,rap630e)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	ucidef_set_led_default "power" "POWER" "green:power" "on"
-	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
@@ -45,11 +40,6 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
-emplus,wap385c)
-	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
-	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
-	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
-	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,7 +48,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"
@@ -68,13 +67,6 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
-	sonicfi,rap630e)
-		ucidef_set_interface_wan "eth1"
-		ucidef_set_interface_lan "eth0"
-		;;
-	emplus,wap581)
-		ucidef_set_interface_wan "eth0 eth1"
-		;;
 	esac
 }
 
@@ -111,16 +103,6 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
-	sonicfi,rap630e)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		lan_mac=$(macaddr_canonicalize $mac)
-		wan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth1 $wan_mac
-		ucidef_set_network_device_mac eth0 $lan_mac
-		ip link set eth1 address $wan_mac
-		ip link set eth0 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -94,15 +94,6 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }
 
-ath11k_generate_macs_rap630e() {
-	touch /lib/firmware/ath11k-macs
-	eth=$(cat /sys/class/net/eth0/address)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -131,7 +122,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -139,7 +129,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -150,7 +139,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
-	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -163,19 +151,16 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
-	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -191,7 +176,6 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -227,9 +211,6 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
-	sonicfi,rap630e)
-		ath11k_generate_macs_rap630e
-		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -73,11 +73,9 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
-	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -92,7 +90,6 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
-	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -132,7 +129,6 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\
@@ -140,7 +136,6 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
-	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -152,8 +147,7 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g|\
-	sonicfi,rap630e)
+	sonicfi,rap630w-312g)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -450,8 +450,6 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
-CONFIG_GPIO_WATCHDOG=y
-CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -1,760 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP385C";
-	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet1 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 23 0>;
-
-			ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x18>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	poe_dc_pins: poe_dc_pins {
-		T2P_DET {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		12V_DET {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pinmux {
-		linux,phandle = <0x4d>;
-		phandle = <0x4d>;
-
-		led_G {
-			pins = "gpio24";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_B {
-			pins = "gpio28";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_R {
-			pins = "gpio38";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@24 {
-			label = "sys:green";
-			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led@28 {
-			label = "sys:blue";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_power: led@38 {
-			label = "sys:red";
-			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap385c:sys:red";
-			default-state = "on";
-		};
-	};
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -1,831 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP581";
-	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x27 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x3e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-					port@4 {
-						port_id = <5>;
-						phy_address = <4>;
-					};
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-				led@28 {
-					label = "led_blue";
-					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@38 {
-					label = "led_red";
-					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@46 {
-					label = "led_green";
-					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-		};
-
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};		
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio28";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red { /* POWER_LED */
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green { /* 2G_LED */
-			pins = "gpio46";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,rproc = <&q6_wcss_pd1>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x23>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x50>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-&pcie_x2 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-	status = "disabled";	
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts

@@ -1,893 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Sonicfi RAP630E";
-	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E200000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4EF00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D300000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D500000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E400000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E900000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4F800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-		ramoops: ramoops@50400000 {
-			compatible = "ramoops";
-			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-			no-map;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-		};
-
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio22", "gpio24", "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	audio_pins: audio_pinmux {
-	};
-
-	leds_pins: leds_pins {
-			led_5g {
-					pins = "gpio34";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_2g {
-					pins = "gpio33";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_sys {
-					pins = "gpio26";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_onekey {
-					pins = "gpio28";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-			};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-	leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led34 {
-				label = "green:wifi5";
-				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led33 {
-				label = "green:wifi2";
-				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led_power: led26 {
-				label = "green:power";
-				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led@28 {
-				label = "led_onekey";
-				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "led_onekey";
-				default-state = "off";
-			};
-		};
-
-		gpio-watchdog {
-			compatible = "linux,wdt-gpio";
-            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
-			hw_algo = "toggle";
-			hw_margin_ms = <5000>;
-			start-at-boot;
-			always-running;
-			status = "okay";
-		};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	nss-radio-priority = <0>;
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	nss-radio-priority = <1>;
-	status = "ok";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-	nss-radio-priority = <1>;
-#endif
-	mem-region = <&q6_qcn6122_data2>;
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "disabled";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -73,17 +73,6 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g
 
-define Device/sonicfi_rap630e
-  DEVICE_TITLE := Sonicfi RAP630E
-  DEVICE_DTS := qcom-ipq5018-rap630e
-  SUPPORTED_DEVICES := sonicfi,rap630e
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap630e
-
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -165,15 +154,6 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
-define Device/emplus_wap385c
-  DEVICE_TITLE := Emplus WAP385C
-  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
-  SUPPORTED_DEVICES := emplus,wap385c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-endef
-TARGET_DEVICES += emplus_wap385c
-
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w
@@ -239,16 +219,3 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
-
-define Device/emplus_wap581
-  DEVICE_TITLE := Emplus WAP581
-  DEVICE_DTS := qcom-ipq5018-emplus-wap581
-  SUPPORTED_DEVICES := emplus,wap581
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-  IMAGES := sysupgrade.tar nand-factory.bin
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
-endef
-TARGET_DEVICES += emplus_wap581
-

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -26,12 +26,6 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
-emplus,wap386v2)
-	ucidef_set_led_default "power" "POWER" "red:power" "on"
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
-	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-	cig,wf660a|\
-	emplus,wap386v2)
+       cig,wf660a)
 		ucidef_set_interface_wan "eth0"		
 		;;
+
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,9 +76,6 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
-	emplus,wap386v2)
-		wan_mac=$(cat /sys/class/net/eth0/address)
-		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,7 +76,6 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -110,8 +109,7 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,7 +122,6 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -146,8 +145,7 @@ platform_do_upgrade() {
 	cig,wf660a)
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -1,356 +0,0 @@
-/*
- * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cpr-regulator.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Emplus WAP386 v2";
-	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	aliases {
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	gpio-reserved-ranges = <20 1>;
-
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <3>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x08>; /* lan port bitmap */
-		switch_wan_bmp = <0x10>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <2>;
-				phy_address = <3>;
-			};
-			port@1 {
-				port_id = <3>;
-				phy_address = <4>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@9 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power: led@28 {
-			label = "red:power";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:red:power";
-			default-state = "on";
-		};
-		led@29 {
-			label = "blue:wan";
-			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:eth";
-			default-state = "on";
-		};
-		led@30 {
-			label = "blue:wifi2";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:2g";
-			default-state = "on";
-		};
-		led@31 {
-			label = "blue:wifi5";
-			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:5g";
-			default-state = "on";
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x30>;
-};
-
-&pcie_phy {
-	status = "ok";
-};
-
-&pcie0 {
-#if defined(__CNSS2__)
-	status = "ok";
-#endif
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&qpic_nand {
-	status = "ok";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&CPU0 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU1 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU2 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU3 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&rpm_glink {
-	status = "disabled";
-};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,15 +76,6 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
-define Device/emplus_wap386v2
-  DEVICE_TITLE := Emplus WAP386v2
-  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := emplus,wap386v2
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
-endef
-TARGET_DEVICES += emplus_wap386v2
-
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -20,12 +20,6 @@ edgecore,oap103)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
-emplus,wap380c)
-	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
-	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
-	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
-	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
-	;;
 sonicfi,rap630w-311g|\
 sonicfi,rap650c|\
 cybertan,eww631-b1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -12,7 +12,6 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"
 
 	case $board in
-	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,14 +16,14 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_rap650c() {
+ath11k_generate_macs_sonicfi() {
 	mac=$(fw_printenv -n BaseMacAddress)
 	[ -z "$mac" ] && return;
 
 	touch /lib/firmware/ath11k-macs
 	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 3)
-	mac2=$(macaddr_add $eth 2)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
 	mac3=$(macaddr_add $eth 4)
 	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
 	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
@@ -72,7 +72,6 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
-	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
@@ -113,8 +112,8 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi,rap650c)
-		ath11k_generate_macs_rap650c
+	sonicfi*)
+		ath11k_generate_macs_sonicfi
 		;;
 	esac
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,7 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	emplus,wap380c|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -49,8 +48,7 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-	cig,wf196|\
-	emplus,wap380c)
+        cig,wf196)
                 [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                         CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                         CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts

@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP380C";
-	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
-	qcom,msm-id = <0x143 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp6";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		qti: ledc@191E000  {
-			compatible = "qti,ledc";
-			reg = <0x191E000 0x20070>;
-			reg-names = "ledc_base_addr";
-			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
-									0x00000000 0x00000000 \
-									0x00000000 0xFFFFFFFF \
-									0xFFFF7FFF 0xFFFFFFFF \
-									0x007D0820 0x00000000 \
-									0x10482094 0x03FFFFE1>;
-			qti,ledc_blink_indices_cnt = <6>;
-			qti,ledc_blink_indices = <15 14 13 12 11 10>;
-			qti,ledc_blink_idx_src_pair = <5 20>;
-			status = "ok";
-		};
-
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio52";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			ledc_pins: ledc_pinmux {
-				led_clk {
-					pins = "gpio18";
-					function = "led0";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_data {
-					pins = "gpio19";
-					function = "led1";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_clr {
-					pins = "gpio20";
-					function = "led2";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <4>;
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		dp6 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&apc_cpr {
-	/* Same CPR configuration as OAK */
-	compatible = "qcom,cpr4-ipq817x-apss-regulator";
-
-	thread@0 {
-		apc_vreg: regulator {
-			regulator-min-microvolt = <1>;
-			regulator-max-microvolt = <2>;
-			qcom,cpr-fuse-corners = <2>;
-			qcom,cpr-corners = <3>;
-			qcom,cpr-speed-bin-corners = <3>;
-			qcom,cpr-corner-fmax-map = <1 3>;
-
-			qcom,cpr-voltage-ceiling =
-				<840000 904000 944000>;
-			qcom,cpr-voltage-floor =
-				<592000 648000 712000>;
-			qcom,corner-frequencies =
-				<1017600000 1382400000 1382400000>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				< 20000  26000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0   7000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-floor-to-ceiling-max-range =
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>;
-		};
-	};
-};
-
-&npu_cpr {
-	status = "disabled";
-};
-
-&nss0 {
-	qcom,low-frequency = <187200000>;
-	qcom,mid-frequency = <748800000>;
-	qcom,max-frequency = <1497600000>;
-};
-
-&nss0 {
-	npu-supply = <&dummy_reg>;
-	mx-supply = <&dummy_reg>;
-};
-
-&wifi0 {
-	qcom,board_id = <0x92>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};
-
-&ledc {
-	pinctrl-0 = <&ledc_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-
-	led_power: led0 {
-		label = "ipq::led0";
-		linux,default-trigger = "default-on";
-	};
-
-	wan: led1 {
-		label = "ipq::led1";
-		linux,default-trigger = "netdev";
-	};
-
-	wifi2g: led2 {
-		label = "ipq::led2";
-		linux,default-trigger = "phy1tpt";
-	};
-
-	wifi5g: led3 {
-		label = "ipq::led3";
-		linux,default-trigger = "phy0tpt";
-	};
-
-	led4 {
-		label = "ipq::led4";
-		linux,default-trigger = "none";
-	};
-
-	led5 {
-		label = "ipq::led5";
-		linux,default-trigger = "none";
-	};
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,15 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/emplus_wap380c
-  DEVICE_TITLE := Emplus WAP380C
-  DEVICE_DTS := qcom-ipq807x-wap380c
-  DEVICE_DTS_CONFIG=config@hk07
-  SUPPORTED_DEVICES := emplus,wap380c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
-endef
-TARGET_DEVICES += emplus_wap380c
-
 define Device/sonicfi_rap650c
   DEVICE_TITLE := SonicFi RAP650C
   DEVICE_DTS := qcom-ipq807x-rap650c

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
++		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -1,119 +0,0 @@
---- a/drivers/net/wireless/ath/ath11k/peer.c
-+++ b/drivers/net/wireless/ath/ath11k/peer.c
-@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
- 		mutex_unlock(&ar->ab->base_ast_lock);
- #endif
--		ath11k_warn(ar->ab,
--			    "failed to find peer vdev_id %d addr %pM in delete\n",
--			    vdev_id, addr);
--		return -EINVAL;
-+		return 0;
-         }
- 
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
-@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
- 	struct ieee80211_vif *vif = arvif->vif;
- 	struct ath11k_sta *arsta;
- 	int ret, fbret;
-+	u8 vdev_id = 0;
- 
- 	lockdep_assert_held(&ar->conf_mutex);
- 
-@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
- 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
- 		return -ENOBUFS;
- 	}
-+
- 	mutex_lock(&ar->ab->tbl_mtx_lock);
- 	spin_lock_bh(&ar->ab->base_lock);
- 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
-+	if (peer)
-+		vdev_id = peer->vdev_id;
-+	spin_unlock_bh(&ar->ab->base_lock);
-+	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+
- 	if (peer) {
--		if (peer->vdev_id == param->vdev_id) {
--			spin_unlock_bh(&ar->ab->base_lock);
--			mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		if (vdev_id == param->vdev_id)
- 			return -EINVAL;
--		}
--		ath11k_peer_rhash_delete(ar->ab, peer);
--	}
- 
--	spin_unlock_bh(&ar->ab->base_lock);
--	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
-+	}
- 
- 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
- 	if (ret) {
---- a/drivers/net/wireless/ath/ath11k/dp.c
-+++ b/drivers/net/wireless/ath/ath11k/dp.c
-@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, vdev_id, addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
- 			    addr, vdev_id);
- 		spin_unlock_bh(&ab->base_lock);
- 		return;
---- a/drivers/net/wireless/ath/ath11k/dp_rx.c
-+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
-@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
- 
- 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 
- 	paddr = peer->rx_tid[params->tid].paddr;
---- a/drivers/net/wireless/ath/ath11k/mac.c
-+++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
- 		keys[i]= peer->keys[i];
-@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
- 
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
-+	if (!peer && cmd == DISABLE_KEY) {
-+		ret = 0;
-+		goto unlock;
-+	}
- 
- 	/* TODO: Check if vdev specific security cfg is mandatory */
- 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
-@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
- 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ar->ab->base_lock);
--		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
-+		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
- 			    sta->addr, arvif->vdev_id);
- 		return;
- 	}
---- a/drivers/net/wireless/ath/ath11k/wmi.c
-+++ b/drivers/net/wireless/ath/ath11k/wmi.c
-@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
- 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		ath11k_warn(ab, "peer not found %pM\n",
-+		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
- 			    arg.mac_addr);
- 		goto exit;
- 	}

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981.dtsi

@@ -141,14 +141,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		ramoops: ramoops@42ff0000 {
-			compatible = "ramoops";
-			reg = <0x0 0x42ff0000 0x0 0x10000>;
-			record-size = <0x2000>;
-			console-size = <0x2000>;
-			pmsg-size = <0x2000>;
-		};
-
 		/* 512 KiB reserved for ARM Trusted Firmware (BL31 + BL32) */
 		secmon_reserved: secmon@43000000 {
 			reg = <0 0x43000000 0 0x80000>;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/boocount

@@ -8,9 +8,6 @@ boot() {
 	edgecore,eap112)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
-		# enable dualboot
-		avail=$(fw_printenv -n upgrade_available)
-		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -1,6 +1,6 @@
 REQUIRE_IMAGE_METADATA=1
 
-swap_wap588m_active_fw() {
+senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
         tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
 	if [ $tmp_active_fw == "0" ]; then
@@ -12,18 +12,6 @@ swap_wap588m_active_fw() {
 	fi
 }
 
-senao_swap_active_fw() {
-	echo "Doing swap active_fw" > /dev/console
-	tmp_active_fw=$(fw_printenv -n active_fw)
-	if [ $tmp_active_fw == "0" ]; then
-		fw_setenv active_fw 1
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi_1\),112640k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	else
-		fw_setenv active_fw 0
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi\),112640k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	fi
-}
-
 platform_do_upgrade() {
 	local board=$(board_name)
 
@@ -106,8 +94,5 @@ platform_post_upgrade_success() {
 		senao,jeap6500)
 			senao_swap_active_fw
 		;;
-		emplus,wap588m)
-			swap_wap588m_active_fw
-		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/config-5.4

@@ -384,16 +384,6 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_PRINTK_TIME=y
-CONFIG_PSTORE=y
-# CONFIG_PSTORE_842_COMPRESS is not set
-CONFIG_PSTORE_CONSOLE=y
-# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
-# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-# CONFIG_PSTORE_LZO_COMPRESS is not set
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-# CONFIG_PSTORE_ZSTD_COMPRESS is not set
 CONFIG_PWM=y
 CONFIG_PWM_MEDIATEK=y
 # CONFIG_PWM_GPIO is not set

feeds/mediatek-sdk/mt76/Makefile

@@ -493,22 +493,10 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR)/tools
 endef
 
-
 define Build/Install
 	:
 endef
 
-ifdef CONFIG_TARGET_PROFILE
-TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
-PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-endif
-
-define Build/Patch
-	$(Build/Patch/Default)
-	$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_PROFILE_NAME)/,profile/)
-endef
-
-
 define Package/kmod-mt76/install
 	true
 endef

feeds/mediatek-sdk/mt76/patches-emplus_wap588m/3000-wifi-mt76-mt7915-emplus-wap588m-thermal-protech.patch

@@ -1,26 +0,0 @@
-Index: mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-===================================================================
---- mt76-2024-04-03-1e336a85.orig/mt7915/mt7915.h
-+++ mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-@@ -71,8 +71,8 @@
- #define MT7915_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
- #define MT7915_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
- 
--#define MT7915_THERMAL_THROTTLE_MAX	100
--#define MT7915_CDEV_THROTTLE_MAX	99
-+#define MT7915_THERMAL_THROTTLE_MAX	80
-+#define MT7915_CDEV_THROTTLE_MAX	79
- 
- #define MT7915_SKU_RATE_NUM		161
- #define MT7915_SKU_PATH_NUM		185
-@@ -86,8 +86,8 @@
- 
- #define MT7915_CRIT_TEMP_IDX		0
- #define MT7915_MAX_TEMP_IDX		1
--#define MT7915_CRIT_TEMP		110
--#define MT7915_MAX_TEMP			120
-+#define MT7915_CRIT_TEMP		103
-+#define MT7915_MAX_TEMP			118
- 
- struct mt7915_vif;
- struct mt7915_sta;

feeds/morse/netifd-morse/lib/netifd/wireless/morse.sh

@@ -832,13 +832,6 @@ morse_hostapd_add_bss(){
 	morse_override_hostapd_set_bss_options hostapd_cfg "$_phy" "$vif" || return 1
 	json_get_vars wds wds_bridge sae_pwe dtim_period max_listen_int start_disabled
 
-	local network_config network_values
-	json_get_values network_values network
-	network_config=$(echo "$network_values" | cut -d' ' -f1)
-
-	if [ "$wds" -gt 0 ] && [ -z "$wds_bridge" ]; then
-		wds_bridge="${network_config%%[0-9]*}"
-	fi
 
 	raw_block=
 	json_for_each_item morse_hostapd_add_raw raws

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,11 +53,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750e_h
 endef
 
-define Package/ath12k-wifi-sonicfi-rap750e-s
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for RAP750E-S
-endef
-
 define Package/ath12k-wifi-sonicfi-rap750w-311a
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
@@ -88,11 +83,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for NWA130BE
 endef
 
-define Package/ath12k-wifi-cig-wf672
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WF672
-endef
-
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -123,15 +113,6 @@ define Package/ath12k-wifi-sonicfi-rap750e-h/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
-define Package/ath12k-wifi-sonicfi-rap750e-s/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.rap750e_s.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.rap750e_s.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-#	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/regdb.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
 define Package/ath12k-wifi-sonicfi-rap750w-311a/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
@@ -179,22 +160,13 @@ define Package/ath12k-wifi-zyxel-nwa130be/install
 	$(INSTALL_DATA) ./board-2.bin.nwa130be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
-define Package/ath12k-wifi-cig-wf672/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf672.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.wf672.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-h))
-$(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-s))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))
 $(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa130be))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf672))

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa130be-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
-                ],
-                "data": "nwa130be-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa130be-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=4121"
-                ],
-                "data": "nwa130be-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=4121"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -15,6 +15,3 @@ $encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
 
 $encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
 $encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX
-
-$encoder -c board-2-nwa130be-IPQ5332.json -o board-2.bin.nwa130be.IPQ5332
-$encoder -c board-2-nwa130be-QCN92XX.json -o board-2.bin.nwa130be.QCN92XX

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile

@@ -1,29 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=cig-device-boot
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/cig-device-boot
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+kmod-usb-serial-xr
-  TITLE:=CIG device init
-endef
-
-define Package/cig-device-boot/description
-  Initialize particular functions of the CIG device
-endef
-
-define Build/Compile
-
-endef
-
-define Package/cig-device-boot/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/cig-device.init $(1)/etc/init.d/cig-device-boot
-endef
-
-$(eval $(call BuildPackage,cig-device-boot))

feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init

@@ -1,7 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot(){
-    [ -e /dev/ttyUSB0 ] && stty -F /dev/ttyUSB0 115200 cs8 -cstopb -parenb -icrnl -onlcr
-}

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/Makefile

@@ -1,25 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=cig-poe-judgment
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/cig-poe-judgment
-  SUBMENU:=Other modules
-  TITLE:=CIG POE judgment
-  FILES:=$(PKG_BUILD_DIR)/cig_poe_judgment.ko
-  AUTOLOAD:=$(call AutoLoad,99,cig_poe_judgment)
-endef
-
-define KernelPackage/cig-poe-judgment/description
-  Find POE type
-endef
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
-endef
-
-$(eval $(call KernelPackage,cig-poe-judgment))

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/Makefile

@@ -1 +0,0 @@
-obj-m += cig_poe_judgment.o

feeds/qca-wifi-7/cig-platform-pkg/cig-poe-judgment/src/cig_poe_judgment.c

@@ -1,252 +0,0 @@
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/proc_fs.h>
-#include <linux/kthread.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqreturn.h>
-#include <linux/of_gpio.h>
-#include <linux/err.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/uaccess.h>
-
-#define GPIO_MAX 		8 
-#define INT_MODE_MASK 		0xf0
-#define DETECT_MODE1	 	0x3
-#define DETECT_MODE2	 	0x4
-
-enum POE_TYPE {
-	POE_TYPE_AT = 1,
-	POE_TYPE_AF,
-	POE_TYPE_BT,
-	POE_TYPE_DC,
-	POE_TYPE_MAX
-};
-
-struct poe_irq_data
-{
-	struct device *dev;
-	int irq;
-	struct tasklet_struct tasklet;
-	int poe_type;
-};
-
-static void  *poe_gpio_base;
-static void  *pse_gpio_base;
-struct poe_irq_data *data = NULL;
-u32 mode;
-
-static const struct of_device_id my_of_ids[] = {
-	{.compatible = "poe-judge"},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of,my_of_ids);
-
-static int poe_info_proc_show(struct seq_file *m, void *v)
-{
-	const char *type_str = "invalid";
-
-	switch (data->poe_type) {
-		case POE_TYPE_AT: 
-			type_str = "AT"; 
-			break;
-		case POE_TYPE_AF: 
-			type_str = "AF"; 
-			break;
-		case POE_TYPE_BT: 
-			type_str = "BT"; 
-			break;
-		case POE_TYPE_DC: 
-			type_str = "DC"; 
-			break;
-	}
-
-	seq_printf(m, "%s\n", type_str);
-
-	return 0;
-}
-
-static void poe_tasklet_func(unsigned long data)
-{
-	struct poe_irq_data *irq_data = (struct poe_irq_data *)data;
-
-	writel(0x3, pse_gpio_base+4);
-	irq_data->poe_type = POE_TYPE_BT;
-
-	return;
-}
-
-static irqreturn_t gpio_key1_irq_handler(int irq, void *dev_id)
-{
-	struct poe_irq_data *data = (struct poe_irq_data *)dev_id;
-
-	disable_irq_nosync(data->irq);
-	tasklet_schedule(&data->tasklet);
-
-	return IRQ_HANDLED;
-}
-
-static int poe_info_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, poe_info_proc_show, NULL);
-}
-
-static const struct proc_ops poe_info_proc_fops = {
-	.proc_open = poe_info_proc_open,
-	.proc_read = seq_read,
-	.proc_lseek = seq_lseek,
-	.proc_release = single_release,
-};
-
-static int gpio_key_probe(struct platform_device *dev)
-{
-	int ret = 0;
-	int irq = (-1);
-	int val = 0;
-	int gpio_id = 0;
-	int gpio[GPIO_MAX] = {0}, gpio_val[GPIO_MAX] = {0};
-	int num;
-	char name[16];
-	struct device_node *np = dev->dev.of_node;
-
-	if (of_property_read_u32(np, "detect-mode", &mode)) {
-		pr_err("Failed to read detect mode\n");
-		return -EINVAL;
-	}
-
-	data = devm_kzalloc(&dev->dev, sizeof(struct poe_irq_data), GFP_KERNEL);
-	if (!data)
-	{
-		return -ENOMEM;
-	}
-
-	if (mode & INT_MODE_MASK) {
-		poe_gpio_base = ioremap(0x1017004, 8);
-		pse_gpio_base = ioremap(0x1026000, 8);
-
-		writel(0x2c1, pse_gpio_base);
-		writel(0x0, pse_gpio_base+4);
-
-
-		data->dev = &dev->dev;
-		dev_set_drvdata(&dev->dev, data);
-
-		gpio_id = of_get_named_gpio(dev->dev.of_node, "detect_gpio", 0);
-		if (gpio_id < 0)
-		{
-			return -EINVAL;
-		}
-
-		tasklet_init(&data->tasklet, poe_tasklet_func, (unsigned long)data);
-
-		ret = devm_gpio_request_one(&dev->dev, gpio_id, GPIOF_IN, "poe_judge");
-		if(ret)
-		{
-			pr_err("GPIO23 request failed, ret:%d\n", ret);
-			return ret;
-		}
-
-		val = readl(poe_gpio_base);
-		if(val == 1)
-		{
-			pr_info("poe type is af or bt,close pse first\n");
-			data->poe_type = POE_TYPE_AF;
-		}
-		else
-		{
-			data->poe_type = POE_TYPE_AT;
-		}
-
-		irq = gpio_to_irq(gpio_id);
-		data->irq = irq;
-
-		ret = devm_request_any_context_irq(&dev->dev, data->irq, 
-				gpio_key1_irq_handler, 
-				IRQF_TRIGGER_FALLING, 
-				"poe_judge", data);
-		if (ret)
-		{
-			pr_err("Request irq fail %d\n", ret);
-			return ret;
-		}
-	} else {
-		if (mode == DETECT_MODE1 || mode == DETECT_MODE2) {
-			num = 3;
-		} else {
-			pr_err("Wrong poe detect mode\n");
-			return -ENOMEM;
-		}
-
-		for (int i = 0; i < num; i++) {
-			sprintf(name, "detect-gpio%d", i+1);
-			gpio[i] = of_get_named_gpio(np, name, 0); 	
-			ret = gpio_request(gpio[i], name);
-			if (ret) {
-				pr_err("Can not request gpio %d\n", i+1);
-				return ret;
-			}
-			gpio_direction_input(gpio[i]);
-			gpio_val[i] = gpio_get_value_cansleep(gpio[i]);
-		}
-		
-		if (mode == DETECT_MODE1){
-			if (gpio_val[0] > 0) {
-				data->poe_type = POE_TYPE_DC;
-			} else if (gpio_val[1] > 0){
-				if (gpio_val[2] == 0) {
-					data->poe_type = POE_TYPE_AT;
-				} else {
-					data->poe_type = POE_TYPE_AF;
-				}
-			}
-		}else if (mode == DETECT_MODE2){
-			switch (gpio_val[0] | (gpio_val[1] << 1) | (gpio_val[2] << 2)) {
-				case 3:
-					data->poe_type = POE_TYPE_AT;
-					break;
-				case 4:
-					data->poe_type = POE_TYPE_BT;
-					break;
-				case 7:
-					data->poe_type = POE_TYPE_AF;
-					break;
-			}
-		}
-
-	}
-
-	if (!proc_create("poe_info", 0444, NULL, &poe_info_proc_fops)) {
-		pr_err("Failed to create proc entry for poe_info\n");
-		return -ENOMEM;
-	}
-
-	return ret;
-}
-
-static int gpio_key_remove(struct platform_device *dev)
-{
-	remove_proc_entry("poe_info", NULL);
-
-	return 0;
-}
-
-static struct platform_driver poe_judge_driver =
-{
-	.driver = {
-		.name = "poe_judge",
-		.of_match_table = my_of_ids,
-		.owner = THIS_MODULE,
-	},
-	.probe = gpio_key_probe,
-	.remove = gpio_key_remove,
-};
-
-module_platform_driver(poe_judge_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Poe type judgment driver");
-MODULE_AUTHOR("huangyunxiang<huangyunxiang@cigtech.com>");

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/Makefile

@@ -1,30 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=cig-wifi-mode-switch
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/cig-wifi-mode-sw
-  SUBMENU:=Other modules
-  TITLE:=CIG wifi mode switch tool
-  FILES:=$(PKG_BUILD_DIR)/cig_rf_switch.ko
-  AUTOLOAD:=$(call AutoLoad,60,cig_rf_switch)
-endef
-
-define KernelPackage/cig-wifi-mode-sw/description
-  CIG wifi mode switch tool for configure wifi mode 2 bands or 3 bands
-endef
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
-endef
-
-define KernelPackage/cig-wifi-mode-sw/install
-	$(INSTALL_DIR) $(1)/usr/sbin/
-	$(INSTALL_BIN) ./files/cig_wifi_mode_sw $(1)/usr/sbin/cig_wms
-endef
-
-$(eval $(call KernelPackage,cig-wifi-mode-sw))

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-band=$1
-if [ $band -eq 2 ] || [ $band -eq 3 ]; then
-	echo $band > /proc/rf_switch
-	echo "firstboot for switch wifi mode 2/3 bands"
-	sleep 1
-	firstboot -y -r
-else
-	echo "error band param"
-fi

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/src/Makefile

@@ -1 +0,0 @@
-obj-m += cig_rf_switch.o

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/src/cig_rf_switch.c

@@ -1,276 +0,0 @@
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/host.h>
-#include <linux/major.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/card.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/list.h>
-#include <linux/pagemap.h>
-
-#define PROC_NAME "rf_switch"
-#define PARTITION_NAME "RF_SWITCH"
-#define MAX_DATA_SIZE 2 
-#define MAX_MMC_DEVICE 2
-
-struct block_device *target_bdev = NULL;
-static char current_value[MAX_DATA_SIZE] = "3"; 
-
-static unsigned int __blkdev_sectors_to_bio_pages(sector_t nr_sects)
-{
-	sector_t pages = DIV_ROUND_UP_SECTOR_T(nr_sects, PAGE_SIZE / 512);
-
-	return min(pages, (sector_t)BIO_MAX_VECS);
-}
-
-struct block_device *find_mmc_partition(void)
-{
-	struct gendisk *disk = NULL;
-	unsigned long idx;
-	struct block_device *bdev = NULL;
-	unsigned int i;
-	
-	for (i = 0; i < MAX_MMC_DEVICE; i++) {
-		bdev = blkdev_get_by_dev(MKDEV(MMC_BLOCK_MAJOR, i * CONFIG_MMC_BLOCK_MINORS), FMODE_READ | FMODE_WRITE, NULL);
-		if (IS_ERR(bdev)) {
-			pr_err("Failed to open MMC device %u: %ld\n", i, PTR_ERR(bdev));
-			continue;
-		}
-	
-		disk = bdev->bd_disk;
-		if (!disk) {
-			blkdev_put(bdev, FMODE_READ | FMODE_WRITE);
-			continue;
-		}
-	
-		xa_for_each_start(&disk->part_tbl, idx, bdev, 1) {
-			if (bdev->bd_meta_info && strcmp(bdev->bd_meta_info->volname, PARTITION_NAME) == 0) {
-				pr_info("Found RF_SWITCH partition at device %u\n", i);
-				return bdev;
-			}
-		}
-	
-		blkdev_put(bdev, FMODE_READ | FMODE_WRITE);
-	}
-	
-	return NULL;
-}
-
-int read_string_from_emmc(struct block_device *bdev, size_t max_length, char *buffer)
-{
-	struct bio *bio;
-	struct page *page;
-	int err = 0;
-	void *data;
-
-	page = alloc_page(GFP_KERNEL);
-	if (!page) {
-		return -ENOMEM;
-	}
-
-	bio = bio_alloc(bdev, __blkdev_sectors_to_bio_pages(1), REQ_OP_READ, GFP_KERNEL);
-	bio_set_dev(bio, bdev);
-	bio->bi_iter.bi_sector = 0;
-	bio_add_page(bio, page, PAGE_SIZE, 0);
-
-	submit_bio_wait(bio);
-
-	if (bio->bi_status) {
-		err = -EIO;
-		goto out_bio;
-	}
-
-	data = kmap(page);
-	kunmap(page);
-	memcpy(buffer, data, max_length - 1);
-	buffer[max_length - 1] = '\0';
-
-out_bio:
-	bio_put(bio);
-	__free_page(page);
-
-	return err;
-}
-
-static int rf_switch_proc_show(struct seq_file *m, void *v)
-{
-	char buffer[MAX_DATA_SIZE] = {0};
-	int ret;
-	
-	ret = read_string_from_emmc(target_bdev, MAX_DATA_SIZE, buffer);
-	if (ret) {
-		seq_printf(m, "%s\n", current_value);
-		return 0;
-	}
-	
-	if (strcmp(buffer, "2") == 0 || strcmp(buffer, "3") == 0) {
-		strncpy(current_value, buffer, MAX_DATA_SIZE);
-		seq_printf(m, "%s\n", current_value);
-	} else {
-		seq_printf(m, "%s\n", current_value);
-	}
-	
-	return 0;
-}
-
-static int blkdev_issue_write(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, struct page *page)
-{
-	int ret = 0;
-	sector_t bs_mask;
-	struct bio *bio;
-	
-	int bi_size = 0;
-	unsigned int sz;
-	
-	if (bdev_read_only(bdev))
-		return -EPERM;
-	
-	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
-	if ((sector | nr_sects) & bs_mask)
-		return -EINVAL;
-	
-	bio = bio_alloc(bdev, __blkdev_sectors_to_bio_pages(nr_sects),
-			REQ_OP_WRITE, gfp_mask);
-	if (!bio) {
-		pr_err("Couldn't alloc bio");
-		return -1;
-	}
-	
-	bio->bi_iter.bi_sector = sector;
-	bio_set_dev(bio, bdev);
-	bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
-	
-	sz = bdev_logical_block_size(bdev);
-	bi_size = bio_add_page(bio, page, sz, 0);
-	
-	if(bi_size != sz) {
-		pr_err("Couldn't add page to the log block");
-		goto error;
-	}
-	if (bio)
-	{
-		ret = submit_bio_wait(bio);
-		bio_put(bio);
-	}
-	
-	return ret;
-error:
-	bio_put(bio);
-	return -1;
-}
-
-static int write_data_to_emmc(struct block_device *bdev, const unsigned char *data, unsigned char fill_byte)
-{
-	struct page *page;
-	void *ptr;
-	sector_t sector_offset = 0;
-	int ret = 0;
-	
-	if (!bdev || !data)
-		return -EINVAL;
-	
-	page = alloc_page(GFP_KERNEL);
-	if (!page) {
-		pr_err("Failed to allocate page\n");
-		return -ENOMEM;
-	}
-	
-	ptr = kmap_atomic(page);
-	
-	memcpy(ptr, data, MAX_DATA_SIZE);
-			
-	memset(ptr + MAX_DATA_SIZE, fill_byte, 512-MAX_DATA_SIZE);
-	kunmap_atomic(ptr);
-		
-	ret = blkdev_issue_write(bdev, sector_offset , 1 ,GFP_ATOMIC, page);
-	if (ret) {
-		pr_err("Failed to write to eMMC at offset 0: %d\n", ret);
-		__free_page(page);
-		return ret;
-	}
-	
-	sync_blockdev(bdev); 
-	__free_page(page);
-	return ret;
-}
-
-static ssize_t rf_switch_proc_write(struct file *file, const char __user *user_buffer, size_t count, loff_t *ppos)
-{
-	unsigned char buffer[MAX_DATA_SIZE] = {0};
-	int ret;
-	
-	if (count != MAX_DATA_SIZE)
-		return -EINVAL;
-	
-	if (copy_from_user(buffer, user_buffer, count))
-		return -EFAULT;
-	
-	buffer[count -1] = '\0';
-	
-	if (strcmp(buffer, "2") != 0 && strcmp(buffer, "3") != 0) {
-		pr_err("Invalid value: %s. Only '2' or '3' are allowed.\n", buffer);
-		return -EINVAL;
-	}
-	
-	ret = write_data_to_emmc(target_bdev,  buffer, 0xFF);
-	if (ret) {
-		pr_err("Failed to write to RF_SWITCH\n");
-		return ret;
-	}
-	
-	strncpy(current_value, buffer, MAX_DATA_SIZE);
-	
-	return count;
-}
-
-static int rf_switch_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rf_switch_proc_show, NULL);
-}
-
-static const struct proc_ops rf_switch_proc_fops = {
-	.proc_open = rf_switch_proc_open,
-	.proc_read = seq_read,
-	.proc_write = rf_switch_proc_write,
-	.proc_lseek = seq_lseek,
-	.proc_release = single_release,
-};
-
-static int __init rf_switch_init(void)
-{
-	target_bdev = find_mmc_partition();
-	if (!target_bdev) {
-		pr_err("Failed to find eMMC card or RF_SWITCH partition\n");
-		return -ENOMEM;
-	}
-	
-	if (!proc_create(PROC_NAME, 0666, NULL, &rf_switch_proc_fops)) {
-		pr_err("Failed to create proc entry\n");
-		return -ENOMEM;
-	}
-	
-	pr_info("RF_SWITCH partition proc interface created\n");
-	return 0;
-}
-
-static void __exit rf_switch_exit(void)
-{
-	if (target_bdev) {
-		blkdev_put(target_bdev, FMODE_READ | FMODE_WRITE);
-		target_bdev = NULL;
-	}
-	remove_proc_entry(PROC_NAME, NULL);
-	pr_info("RF_SWITCH partition proc interface removed\n");
-}
-
-module_init(rf_switch_init);
-module_exit(rf_switch_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Yunxiang Huang");
-MODULE_DESCRIPTION("RF_SWITCH partition read/write driver");

feeds/qca-wifi-7/hostapd/Makefile

@@ -768,6 +768,7 @@ define Package/wpad/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
 	$(LN) wpad $(1)/usr/sbin/hostapd
 	$(LN) wpad $(1)/usr/sbin/wpa_supplicant
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
 endef
 Package/wpad-basic/install = $(Package/wpad/install)
 Package/wpad-basic-openssl/install = $(Package/wpad/install)

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -121,6 +121,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
@@ -145,7 +147,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
 		maxassoc_ignore_probe band
 
@@ -242,6 +244,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -423,9 +427,6 @@ hostapd_common_add_bss_config() {
 
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -679,8 +680,7 @@ hostapd_set_bss_options() {
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -737,8 +737,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
@@ -777,16 +775,11 @@ hostapd_set_bss_options() {
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-		psk-sae|eap-eap2)
+		psk-sae|psk2-radius|eap-eap2)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-                psk2-radius)
-			set_default ieee80211w 1
-			set_default sae_require_mfp 0
-			[ "$ppsk" -eq 0 ] && set_default sae_pwe 4
-                ;;
 	esac
 	[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
 	[ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"

feeds/qca-wifi-7/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
+			ssid.mpsk = config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
+	if (!is_ssid_mpsk(data.iface))
+		return;
+
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
-		if (!is_ssid_mpsk(data.iface))
-			return;
-
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
+		if (data.psk_idx == null)
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/qca-wifi-7/hostapd/patches/r45-Fix-6G-CBP-Test-Fail.patch

@@ -1,14 +0,0 @@
---- a/src/drivers/driver_nl80211_event.c	2025-07-11 09:37:29.772326959 +0800
-+++ b/src/drivers/driver_nl80211_event.c	2025-07-14 15:27:22.079961399 +0800
-@@ -4904,6 +4904,11 @@
- 	dl_list_for_each_safe(drv, tmp, &global->interfaces,
- 			      struct wpa_driver_nl80211_data, list) {
- 		for (bss = drv->first_bss; bss; bss = bss->next) {
-+           /* AWGN event should be delivered to 6G interface only. */
-+			if (gnlh->cmd == NL80211_CMD_AWGN_DETECT && 
-+					(nla_get_u32(tb[NL80211_ATTR_WIPHY_FREQ])) != bss->flink->freq)
-+				continue;
-+
- 			if (wiphy_idx_set)
- 				wiphy_idx = nl80211_get_wiphy_index(bss);
- 			if ((ifidx == -1 && !wiphy_idx_set && !wdev_id_set) ||

feeds/qca-wifi-7/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/qca-wifi-7/hostapd/patches/zzz-socket-read-buffer-size.patch

@@ -1,11 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -127,7 +127,7 @@ static void nl80211_register_eloop_read(
- 	 */
- 	int err;
- 
--	err = nl_socket_set_buffer_size(*handle, 262144, 0);
-+	err = nl_socket_set_buffer_size(*handle, 1048576, 0);
- 	if (err < 0) {
- 		wpa_printf(MSG_DEBUG,
- 			   "nl80211: Could not set nl_socket RX buffer size: %s",

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.c

@@ -1923,21 +1923,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -15,10 +15,18 @@ sercomm,ap72tip)
 	;;
 sonicfi,rap7110c-341x|\
 sonicfi,rap750e-h|\
-sonicfi,rap750e-s|\
 sonicfi,rap750w-311a)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+zyxel,nwa130be)
+	#eth0: APPE: phyaddr 4  green:2.5G  orange:others
+	ssdk_sh debug phy set 4 0x40078074 0x670
+	ssdk_sh debug phy set 4 0x40078078 0x8600
+
+	#eth1:  MHT: phyaddr 3  green:2.5G orange:others
+	ssdk_sh debug phy set 3 0x40078074 0x670
+	ssdk_sh debug phy set 3 0x40078078 0x8600
+	;;
 esac
 
 board_config_flush

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -13,15 +13,13 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 		;;
 	cig,wf189|\
-	cig,wf672|\
 	edgecore,eap105|\
 	sercomm,ap72tip|\
 	sonicfi,rap750w-311a)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	sonicfi,rap7110c-341x|\
-	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s)
+	sonicfi,rap750e-h)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
@@ -45,35 +43,21 @@ qcom_setup_macs()
 {
         local board="$1"
         case $board in
-        cig,wf189w|\
-        cig,wf189h|\
+	cig,wf189w|\
+	cig,wf189h|\
         cig,wf189)
-                mtd=$(find_mtd_chardev "0:APPSBLENV")
-                [ -z "$mtd" ] && return;
-                mac=$(grep eth1addr= $mtd | cut -d= -f2)
+		mtd=$(find_mtd_chardev "0:APPSBLENV")
+		[ -z "$mtd" ] && return;
+		mac=$(grep eth1addr= $mtd | cut -d= -f2)
                 [ -z "$mac" ] && return;
                 wan_mac=$(macaddr_canonicalize $mac)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
                 ucidef_set_network_device_mac eth0 $wan_mac
                 ucidef_set_network_device_mac eth1 $lan_mac
                 ucidef_set_label_macaddr $wan_mac
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
-                ;;
-        cig,wf672)
-                mmc=$(find_mmc_part "0:APPSBLENV")
-                [ -z "$mmc" ] && return;
-                mac=$(grep eth1addr= $mmc | cut -d= -f2)
-                [ -z "$mac" ] && return;
-                wan_mac=$(macaddr_canonicalize $mac)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ucidef_set_network_device_mac eth0 $wan_mac
-                ucidef_set_network_device_mac eth1 $lan_mac
-                ucidef_set_label_macaddr $wan_mac
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
+		ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
+		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
+		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
         sercomm,ap72tip)
                 wan_mac=$(cat /sys/class/net/eth0/address)
@@ -90,12 +74,11 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
 		;;
         sonicfi,rap7110c-341x|\
-        sonicfi,rap750e-h|\
-        sonicfi,rap750e-s)
+        sonicfi,rap750e-h)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                [ "$board" = "sonicfi,rap7110c-341x" ] &&
+                [ "$board" = "sonicfi,rap7110c-34x" ] &&
                     ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
                 ;;
         sonicfi,rap750w-311a)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -23,39 +23,6 @@ caldata_extract() {
                 caldata_die "failed to extract calibration data from $mtd"
 }
 
-cig_ipq5322_cal() {
-	local ext_ant=0
-
-	[ -f /sys/firmware/devicetree/base/soc@0/wifi@c0000000/ext_antenna ] && ext_ant=1	
-
-	if [ "$ext_ant" = "0" ]; then
-		caldata_extract_mmc "0:ART" 0x1000 0x20000
-	else
-		caldata_extract_mmc "0:ART" 0xbd800 0x20000
-	fi
-}
-
-cig_qcn92xx_cal() {
-	local bands=$(cat /proc/rf_switch)
-	local ext_ant=0
-	
-	[ -f /sys/firmware/devicetree/base/soc@0/wifi@c0000000/ext_antenna ] && ext_ant=1	
-
-	if [ "$bands" = "2" ]; then
-		if [ "$ext_ant" = "0" ]; then
-			caldata_extract_mmc "0:ART" 0x8b800 0x2d000
-		else
-			caldata_extract_mmc "0:ART" 0xe3000 0x2d000
-		fi
-	else
-		if [ "$ext_ant" = "0" ]; then
-			caldata_extract_mmc "0:ART" 0x58800 0x2d000
-		else
-			caldata_extract_mmc "0:ART" 0x115000 0x2d000
-		fi
-	fi
-}
-
 board=$(board_name)
 case "$FIRMWARE" in
 ath12k/IPQ5332/hw1.0/caldata.bin)
@@ -69,14 +36,10 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	zyxel,nwa130be)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
-	cig,wf672)
-		cig_ipq5322_cal
-		;;
 	sonicfi,rap7110c-341x)
 		caldata_extract_mmc "0:ART" 0x1000 0xF800
 		;;
 	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s|\
 	sonicfi,rap750w-311a)
 		caldata_extract "0:ART" 0x1000 0xf800
 		;;
@@ -91,9 +54,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	zyxel,nwa130be)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;
-	cig,wf672)
-		cig_qcn92xx_cal
-		;;
 	sonicfi,rap7110c-341x)
 		caldata_extract_mmc "0:ART" 0x58800 0x2d000
 		;;
@@ -102,7 +62,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 ath12k/QCN6432/hw1.0/caldata_1.bin)
 	case "$board" in
 	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s|\
 	sonicfi,rap750w-311a)
 		caldata_extract "0:ART" 0x12800 0x18800
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/iface/85-greqos

@@ -1,20 +0,0 @@
-# /etc/hotplug.d/iface/85-greqos
-[ "$ACTION" == "ifup" ] || exit 0
-
-. /lib/functions.sh
-
-case "$(board_name)" in
-cig,wf189|\
-cig,wf189w|\
-cig,wf189h|\
-cig,wf672)
-    case "$INTERFACE" in
-      gre*)
-        dev=$(ubus call network.interface.$INTERFACE status | jsonfilter -e '@.l3_device')
-        [ -n "$dev" ] && {
-          tc qdisc del dev $dev root 2>/dev/null
-          tc qdisc add dev $dev root noqueue
-        }
-        ;;
-    esac
-esac

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -1,22 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	. /lib/functions.sh
-
-	case "$(board_name)" in
-	edgecore,eap105)
-		ssdk_sh debug phy set 0x1 0x601FD032 0xff
-		;;
-	zyxel,nwa130be)
-		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
-		ssdk_sh debug phy set 4 0x40078074 0x670
-		ssdk_sh debug phy set 4 0x40078078 0x8600
-
-		#eth1:  MHT: phyaddr 3  green:2.5G orange:others
-		ssdk_sh debug phy set 3 0x40078074 0x670
-		ssdk_sh debug phy set 3 0x40078078 0x8600
-		;;
-	esac
-}

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -57,52 +57,6 @@ sonicfi_dualimage_check() {
 	fi
 }
 
-spi_nor_emmc_do_upgrade_bootconfig() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-	[ -f /proc/boot_info/bootconfig0/getbinary_bootconfig ] || {
-		echo "bootconfig does not exist"
-		exit
-	}
-	CI_ROOTPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
-	CI_KERNPART="$(cat /proc/boot_info/bootconfig0/0:HLOS/upgradepartition)"
-
-	[ -n "$CI_KERNPART" -a -n "$CI_ROOTPART" ] || {
-		echo "kernel or rootfs partition is unknown"
-		exit
-	}
-
-	local primary="0"
-	[ "$(cat /proc/boot_info/bootconfig0/rootfs/primaryboot)" = "0" ] && primary="1"
-	echo "$primary" > /proc/boot_info/bootconfig0/rootfs/primaryboot 2>/dev/null
-	echo "$primary" > /proc/boot_info/bootconfig0/0:HLOS/primaryboot 2>/dev/null
-	cp /proc/boot_info/bootconfig0/getbinary_bootconfig /tmp/bootconfig
-
-	do_flash_emmc $tar_file $CI_KERNPART $board_dir kernel
-	do_flash_emmc $tar_file $CI_ROOTPART $board_dir root
-
-	local emmcblock="$(find_mmc_part "rootfs_data")"
-	if [ -e "$emmcblock" ]; then
-		mkfs.ext4 -F "$emmcblock"
-	fi
-
-	for part in "0:BOOTCONFIG" "0:BOOTCONFIG1"; do
-				local mtdchar=$(echo $(find_mtd_chardev $part) | sed 's/^.\{5\}//')
-				if [ -n "$mtdchar" ]; then
-						echo start to update $mtdchar
-						mtd -qq write /proc/boot_info/bootconfig0/getbinary_bootconfig "/dev/${mtdchar}" 2>/dev/null && echo update mtd $mtdchar
-			   else
-						emmcblock=$(find_mmc_part $part)
-						echo erase ${emmcblock}
-						dd if=/dev/zero of=${emmcblock} 2> /dev/null
-						echo update $emmcblock
-						dd if=/tmp/bootconfig of=${emmcblock} 2> /dev/null
-				fi
-	done
-}
-
 emmc_do_upgrade() {
 	local tar_file="$1"
 	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
@@ -132,8 +86,6 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	sercomm,ap72tip-v4|\
-	sercomm,ap72tip|\
 	cig,wf189w|\
 	cig,wf189h|\
 	cig,wf189)
@@ -146,9 +98,6 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	cig,wf672)
-		spi_nor_emmc_do_upgrade_bootconfig $1
-		;;
 	edgecore,eap105)
 		if [ "$(find_mtd_chardev rootfs)" ]; then
 			CI_UBIPART="rootfs"
@@ -168,11 +117,14 @@ platform_do_upgrade() {
 		emmc_do_upgrade "$1"
 		;;
 	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s|\
 	sonicfi,rap750w-311a)
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
+	sercomm,ap72tip-v4|\
+	sercomm,ap72tip)
+		nand_upgrade_tar "$1"
+		;;
 	zyxel,nwa130be)
 		nand_upgrade_tar "$1"
 		;;

feeds/qca-wifi-7/ipq53xx/config-6.1

@@ -1223,6 +1223,3 @@ CONFIG_PSTORE=y
 CONFIG_PSTORE_CONSOLE=y
 CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
-# CONFIG_RTL8221D_PHY is not set
-# CONFIG_INPUT_LSM303AGR is not set
-# CONFIG_USB_SERIAL_XR is not set

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -236,15 +236,6 @@
 			};
 		};
 
-		poe {
-			compatible = "poe-judge";
-			detect-mode = <0x3>;
-			detect-gpio1 = <&tlmm 25 GPIO_ACTIVE_HIGH>;
-			detect-gpio2 = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-			detect-gpio3 = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			status = "ok";
-                };
-
 		wsi: wsi {
 			id = <0>;
 			num_chip = <2>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -85,15 +85,6 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
-        ramoops@49c00000 {
-            compatible = "ramoops";
-            no-map;
-            reg = <0x0 0x49c00000 0x0 0x50000>;
-            record-size = <0x20000>;
-            console-size = <0x8000>;
-            pmsg-size = <0x8000>;
-        };
-
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
@@ -307,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;
 

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -85,15 +85,6 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
-        ramoops@49c00000 {
-            compatible = "ramoops";
-            no-map;
-            reg = <0x0 0x49c00000 0x0 0x50000>;
-            record-size = <0x20000>;
-            console-size = <0x8000>;
-            pmsg-size = <0x8000>;
-        };
-
 		q6_mem_regions: q6_mem_regions@4A900000  {
 			reg = <0x0 0x4a900000 0x0 0x6D00000>;
 			no-map;
@@ -307,13 +298,6 @@
 			};
 		};
 
-		poe {
-                        compatible = "poe-judge";
-			detect-mode = <0x11>;
-                        detect_gpio = <&tlmm 0x17 0>;
-                        status = "ok";
-                };
-
 		ess-instance {
 			num_devices = <0x2>;