Initial t31_lite_cmcc-hdc-51-a6-v10 device

.github/workflows/master.yml

@@ -75,6 +75,7 @@ jobs:
           - t31_lite_wansview-q5-2k
           - t31_lite_aoni-ep01j05
           - t31_lite_chinamobile-hdc-51-a6-v11
+          - t31_lite_cmcc-hdc-51-a6-v10
           - t31_lite_chinatelecom-y4h-50
           - t31_lite_wyze-v3b
           - t31_lite_xiaomi-mjsxj03hl

README.md

@@ -22,7 +22,8 @@ Babysense See HD IP206   SSC333       GC2053    RTL8188FU_USB    NOR_16M   done
 Bathhouse                HI3518EV300  ?         RTL8188FU_USB    NOR_8M    research
 ChinaTelecom DS-YTJ5301  SSC30KD      GC2053    RTL8188FU_USB    NOR_16M   video-ok, wifi-no, motors-no
 ChinaTelecom Y4H-50      T31L         ?         ?                NOR_16M   new
-CMCC HDC-51 A5-V12       T21N         SC2235    RTL8189FTV_SDIO  NOR_16M   in progress
+CMCC HDC-51 A5-V12       T21N         SC2235    RTL8189FTV_SDIO  NOR_16M   done
+CMCC HDC-51 A6-V11       T31L         JXF37     RTL8188FU_USB    NOR_16M   in progress
 CMCC HDC-51 A6-V11       T31L         SC2332    RTL8188FU_USB    NOR_16M   done
 Cootli CAMV0103          GK7202V300   SC223A    SSV6355_USB      NOR_8M    in progress
 Emax Wyvern Link         SSC338Q      IMX415                     NOR_16M   done

devices/t31_lite_cmcc-hdc-51-a6-v10/br-ext-chip-ingenic/configs/t31_lite_cmcc-hdc-51-a6-v10_defconfig

@@ -0,0 +1,69 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t31.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t31"
+BR2_OPENIPC_SOC_FAMILY="t31"
+BR2_OPENIPC_SNS_MODEL="jxf37"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_INGENIC_OSDRV_T31=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_RTL8188FU_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y

devices/t31_lite_cmcc-hdc-51-a6-v10/general/overlay/etc/init.d/S97qrscan

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+case "$1" in
+	start)
+		qrscan.sh >/dev/null 2>&1 &
+		;;
+esac

devices/t31_lite_cmcc-hdc-51-a6-v10/general/overlay/usr/sbin/qrscan.sh

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+GPIO=53   # BLUE led, t31_lite_cmcc-hdc-51-a6-v10
+N=0
+
+gpio clear ${GPIO} | logger -t gpio
+
+while true ; do
+    if [ "$N" -ge 30 ]; then
+        logger -t qrscan "Recognition timeout exceeded, reboot camera and try again..."
+        gpio set ${GPIO} | logger -t gpio
+        exit 1
+    fi
+    timeout 1 wget -q -O /tmp/image.jpg http://127.0.0.1/image.jpg
+    data=$(qrscan -p /tmp/image.jpg)
+    if [[ -n "$data" ]] && $(echo "$data" | grep -q wlan); then
+        fw_setenv $(echo $data | cut -d " " -f 1 | sed 's/=/ /')
+        fw_setenv $(echo $data | cut -d " " -f 2 | sed 's/=/ /')
+        logger -t qrscan "Recognition successfully, wlanssid and wlanpass is writed to env. Reboot required."
+        curl --data-binary @/usr/lib/sounds/ready_48k.pcm http://localhost/play_audio
+        for a in $(seq 10) ; do (gpio set ${GPIO} ; sleep 0.3 ; gpio clear ${GPIO} ; sleep 0.3 ) ; done | logger -t gpio
+        reboot -f
+    fi
+    sleep 1
+    N=$((N + 1))
+done
+

devices/t31_lite_cmcc-hdc-51-a6-v10/general/overlay/usr/share/openipc/customizer.sh

@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t31_lite_chinamobile-hdc-51-a6-v10-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .nightMode.lightMonitor true
+cli -s .nightMode.lightSensorPin 7
+cli -s .nightMode.irCutPin1 58
+cli -s .nightMode.irCutPin2 57
+cli -s .video0.codec h264
+cli -s .audio.enabled true
+cli -s .audio.codec opus
+cli -s .audio.srate 48000
+cli -s .audio.volume 50
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 63
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev rtl8188fu-generic
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 39M
+fw_setenv rmem 25M@0x2700000
+#
+exit 0