Initial

clonos_network/Gemfile

@@ -0,0 +1,18 @@
+source ENV['GEM_SOURCE'] || 'https://rubygems.org'
+
+puppetversion = ENV.key?('PUPPET_VERSION') ? ENV['PUPPET_VERSION'] : ['>= 3.3']
+gem 'metadata-json-lint'
+gem 'puppet', puppetversion
+gem 'puppetlabs_spec_helper', '>= 1.0.0'
+gem 'puppet-lint', '>= 1.0.0'
+gem 'facter', '>= 1.7.0'
+gem 'rspec-puppet'
+
+# rspec must be v2 for ruby 1.8.7
+if RUBY_VERSION >= '1.8.7' && RUBY_VERSION < '1.9'
+  gem 'rspec', '~> 2.0'
+  gem 'rake', '~> 10.0'
+else
+  # rubocop requires ruby >= 1.9
+  gem 'rubocop'
+end

clonos_network/README.md

@@ -0,0 +1,83 @@
+# clonos_network
+
+#### Table of Contents
+
+1. [Description](#description)
+1. [Setup - The basics of getting started with clonos_network](#setup)
+    * [What clonos_network affects](#what-clonos_network-affects)
+    * [Setup requirements](#setup-requirements)
+    * [Beginning with clonos_network](#beginning-with-clonos_network)
+1. [Usage - Configuration options and additional functionality](#usage)
+1. [Reference - An under-the-hood peek at what the module is doing and how](#reference)
+1. [Limitations - OS compatibility, etc.](#limitations)
+1. [Development - Guide for contributing to the module](#development)
+
+## Description
+
+Start with a one- or two-sentence summary of what the module does and/or what
+problem it solves. This is your 30-second elevator pitch for your module.
+Consider including OS/Puppet version it works with.
+
+You can give more descriptive information in a second paragraph. This paragraph
+should answer the questions: "What does this module *do*?" and "Why would I use
+it?" If your module has a range of functionality (installation, configuration,
+management, etc.), this is the time to mention it.
+
+## Setup
+
+### What clonos_network affects **OPTIONAL**
+
+If it's obvious what your module touches, you can skip this section. For
+example, folks can probably figure out that your mysql_instance module affects
+their MySQL instances.
+
+If there's more that they should know about, though, this is the place to mention:
+
+* A list of files, packages, services, or operations that the module will alter,
+  impact, or execute.
+* Dependencies that your module automatically installs.
+* Warnings or other important notices.
+
+### Setup Requirements **OPTIONAL**
+
+If your module requires anything extra before setting up (pluginsync enabled,
+etc.), mention it here.
+
+If your most recent release breaks compatibility or requires particular steps
+for upgrading, you might want to include an additional "Upgrading" section
+here.
+
+### Beginning with clonos_network
+
+The very basic steps needed for a user to get the module up and running. This
+can include setup steps, if necessary, or it can be an example of the most
+basic use of the module.
+
+## Usage
+
+This section is where you describe how to customize, configure, and do the
+fancy stuff with your module here. It's especially helpful if you include usage
+examples and code samples for doing things with your module.
+
+## Reference
+
+Here, include a complete list of your module's classes, types, providers,
+facts, along with the parameters for each. Users refer to this section (thus
+the name "Reference") to find specific details; most users don't read it per
+se.
+
+## Limitations
+
+This is where you list OS compatibility, version compatibility, etc. If there
+are Known Issues, you might want to include them under their own heading here.
+
+## Development
+
+Since your module is awesome, other users will want to play with it. Let them
+know what the ground rules for contributing are.
+
+## Release Notes/Contributors/Etc. **Optional**
+
+If you aren't using changelog, put your release notes here (though you should
+consider using changelog). You can also add any additional sections you feel
+are necessary or important to include here. Please use the `## ` header.

clonos_network/Rakefile

@@ -0,0 +1,32 @@
+require 'puppetlabs_spec_helper/rake_tasks'
+require 'puppet-lint/tasks/puppet-lint'
+require 'metadata-json-lint/rake_task'
+
+if RUBY_VERSION >= '1.9'
+  require 'rubocop/rake_task'
+  RuboCop::RakeTask.new
+end
+
+PuppetLint.configuration.send('disable_80chars')
+PuppetLint.configuration.relative = true
+PuppetLint.configuration.ignore_paths = ['spec/**/*.pp', 'pkg/**/*.pp']
+
+desc 'Validate manifests, templates, and ruby files'
+task :validate do
+  Dir['manifests/**/*.pp'].each do |manifest|
+    sh "puppet parser validate --noop #{manifest}"
+  end
+  Dir['spec/**/*.rb', 'lib/**/*.rb'].each do |ruby_file|
+    sh "ruby -c #{ruby_file}" unless ruby_file =~ %r{spec/fixtures}
+  end
+  Dir['templates/**/*.erb'].each do |template|
+    sh "erb -P -x -T '-' #{template} | ruby -c"
+  end
+end
+
+desc 'Run metadata_lint, lint, validate, and spec tests.'
+task :test do
+  [:metadata_lint, :lint, :validate, :spec].each do |test|
+    Rake::Task[test].invoke
+  end
+end

clonos_network/examples/init.pp

@@ -0,0 +1,12 @@
+# The baseline for module testing used by Puppet Labs is that each manifest
+# should have a corresponding test manifest that declares that class or defined
+# type.
+#
+# Tests are then run by using puppet apply --noop (to check for compilation
+# errors and view a log of events) or by fully applying the test in a virtual
+# environment (to compare the resulting system state to the desired state).
+#
+# Learn more about module testing here:
+# https://docs.puppet.com/guides/tests_smoke.html
+#
+include ::clonos_network

clonos_network/manifests/init.pp

@@ -0,0 +1,82 @@
+# Class: clonos_network
+# ===========================
+#
+# Full description of class clonos_network here.
+#
+# Parameters
+# ----------
+#
+# Document parameters here.
+#
+# * `sample parameter`
+# Explanation of what this parameter affects and what it defaults to.
+# e.g. "Specify one or more upstream ntp servers as an array."
+#
+# Variables
+# ----------
+#
+# Here you should define a list of variables that this module would require.
+#
+# * `sample variable`
+#  Explanation of how this variable affects the function of this class and if
+#  it has a default. e.g. "The parameter enc_ntp_servers must be set by the
+#  External Node Classifier as a comma separated list of hostnames." (Note,
+#  global variables should be avoided in favor of class parameters as
+#  of Puppet 2.6.)
+#
+# Examples
+# --------
+#
+# @example
+#    class { 'clonos_network':
+#      servers => [ 'pool.ntp.org', 'ntp.local.company.com' ],
+#    }
+#
+# Authors
+# -------
+#
+# Author Name <author@domain.com>
+#
+# Copyright
+# ---------
+#
+# Copyright 2016 Your name here, unless otherwise noted.
+#
+class clonos_network (
+        $uplink_interface = $clonos_network::params::uplink_interface,
+        $ip4_addr         = $clonos_network::params::ip4_addr,
+        $ip4_gateway      = $clonos_network::params::ip4_gateway,
+        $ip4_mask         = $clonos_network::params::ip4_mask,
+	$hostname         = $clonos_network::params::hostname,
+) inherits clonos_network::params {
+
+	Shellvar { target => '/etc/rc.conf' }
+
+	# interface
+	if $uplink_interface {
+		if $ip4_addr and $ip4_mask == undef {
+			shellvar { "ifconfig_$uplink_interface":
+				value => "$ip4_addr",
+			}
+		}
+
+		if $ip4_addr and $ip4_mask != undef {
+			shellvar { "ifconfig_$uplink_interface":
+				value => "$ip4_addr netmask $ip4_mask",
+			}
+		}
+	}
+
+	if $hostname {
+		shellvar { "hostname":
+			value => "$hostname",
+		}
+	}
+
+	if $ip4_gateway {
+		shellvar { "defaultrouter":
+			value => "$ip4_gateway",
+		}
+	}
+
+}

clonos_network/manifests/params.pp

@@ -0,0 +1,7 @@
+class clonos_network::params {
+  $uplink_interface  = undef
+  $ip4_addr = undef
+  $ip4_gateway = undef
+  $ip4_mask = undef
+  $hostname = undef
+}

clonos_network/metadata.json

@@ -0,0 +1,15 @@
+{
+  "name": "clonos-clonos_network",
+  "version": "0.1.0",
+  "author": "clonos",
+  "summary": null,
+  "license": "Apache-2.0",
+  "source": "",
+  "project_page": null,
+  "issues_url": null,
+  "dependencies": [
+    {"name":"puppetlabs-stdlib","version_requirement":">= 1.0.0"}
+  ],
+  "data_provider": null
+}
+

clonos_network/spec/classes/init_spec.rb

@@ -0,0 +1,6 @@
+require 'spec_helper'
+describe 'clonos_network' do
+  context 'with default values for all parameters' do
+    it { should contain_class('clonos_network') }
+  end
+end

clonos_network/spec/spec_helper.rb

@@ -0,0 +1 @@
+require 'puppetlabs_spec_helper/module_spec_helper'

clonos_userspw/Gemfile

@@ -0,0 +1,18 @@
+source ENV['GEM_SOURCE'] || 'https://rubygems.org'
+
+puppetversion = ENV.key?('PUPPET_VERSION') ? ENV['PUPPET_VERSION'] : ['>= 3.3']
+gem 'metadata-json-lint'
+gem 'puppet', puppetversion
+gem 'puppetlabs_spec_helper', '>= 1.0.0'
+gem 'puppet-lint', '>= 1.0.0'
+gem 'facter', '>= 1.7.0'
+gem 'rspec-puppet'
+
+# rspec must be v2 for ruby 1.8.7
+if RUBY_VERSION >= '1.8.7' && RUBY_VERSION < '1.9'
+  gem 'rspec', '~> 2.0'
+  gem 'rake', '~> 10.0'
+else
+  # rubocop requires ruby >= 1.9
+  gem 'rubocop'
+end

clonos_userspw/README.md

@@ -0,0 +1,83 @@
+# clonos_network
+
+#### Table of Contents
+
+1. [Description](#description)
+1. [Setup - The basics of getting started with clonos_network](#setup)
+    * [What clonos_network affects](#what-clonos_network-affects)
+    * [Setup requirements](#setup-requirements)
+    * [Beginning with clonos_network](#beginning-with-clonos_network)
+1. [Usage - Configuration options and additional functionality](#usage)
+1. [Reference - An under-the-hood peek at what the module is doing and how](#reference)
+1. [Limitations - OS compatibility, etc.](#limitations)
+1. [Development - Guide for contributing to the module](#development)
+
+## Description
+
+Start with a one- or two-sentence summary of what the module does and/or what
+problem it solves. This is your 30-second elevator pitch for your module.
+Consider including OS/Puppet version it works with.
+
+You can give more descriptive information in a second paragraph. This paragraph
+should answer the questions: "What does this module *do*?" and "Why would I use
+it?" If your module has a range of functionality (installation, configuration,
+management, etc.), this is the time to mention it.
+
+## Setup
+
+### What clonos_network affects **OPTIONAL**
+
+If it's obvious what your module touches, you can skip this section. For
+example, folks can probably figure out that your mysql_instance module affects
+their MySQL instances.
+
+If there's more that they should know about, though, this is the place to mention:
+
+* A list of files, packages, services, or operations that the module will alter,
+  impact, or execute.
+* Dependencies that your module automatically installs.
+* Warnings or other important notices.
+
+### Setup Requirements **OPTIONAL**
+
+If your module requires anything extra before setting up (pluginsync enabled,
+etc.), mention it here.
+
+If your most recent release breaks compatibility or requires particular steps
+for upgrading, you might want to include an additional "Upgrading" section
+here.
+
+### Beginning with clonos_network
+
+The very basic steps needed for a user to get the module up and running. This
+can include setup steps, if necessary, or it can be an example of the most
+basic use of the module.
+
+## Usage
+
+This section is where you describe how to customize, configure, and do the
+fancy stuff with your module here. It's especially helpful if you include usage
+examples and code samples for doing things with your module.
+
+## Reference
+
+Here, include a complete list of your module's classes, types, providers,
+facts, along with the parameters for each. Users refer to this section (thus
+the name "Reference") to find specific details; most users don't read it per
+se.
+
+## Limitations
+
+This is where you list OS compatibility, version compatibility, etc. If there
+are Known Issues, you might want to include them under their own heading here.
+
+## Development
+
+Since your module is awesome, other users will want to play with it. Let them
+know what the ground rules for contributing are.
+
+## Release Notes/Contributors/Etc. **Optional**
+
+If you aren't using changelog, put your release notes here (though you should
+consider using changelog). You can also add any additional sections you feel
+are necessary or important to include here. Please use the `## ` header.

clonos_userspw/Rakefile

@@ -0,0 +1,32 @@
+require 'puppetlabs_spec_helper/rake_tasks'
+require 'puppet-lint/tasks/puppet-lint'
+require 'metadata-json-lint/rake_task'
+
+if RUBY_VERSION >= '1.9'
+  require 'rubocop/rake_task'
+  RuboCop::RakeTask.new
+end
+
+PuppetLint.configuration.send('disable_80chars')
+PuppetLint.configuration.relative = true
+PuppetLint.configuration.ignore_paths = ['spec/**/*.pp', 'pkg/**/*.pp']
+
+desc 'Validate manifests, templates, and ruby files'
+task :validate do
+  Dir['manifests/**/*.pp'].each do |manifest|
+    sh "puppet parser validate --noop #{manifest}"
+  end
+  Dir['spec/**/*.rb', 'lib/**/*.rb'].each do |ruby_file|
+    sh "ruby -c #{ruby_file}" unless ruby_file =~ %r{spec/fixtures}
+  end
+  Dir['templates/**/*.erb'].each do |template|
+    sh "erb -P -x -T '-' #{template} | ruby -c"
+  end
+end
+
+desc 'Run metadata_lint, lint, validate, and spec tests.'
+task :test do
+  [:metadata_lint, :lint, :validate, :spec].each do |test|
+    Rake::Task[test].invoke
+  end
+end

clonos_userspw/examples/init.pp

@@ -0,0 +1,12 @@
+# The baseline for module testing used by Puppet Labs is that each manifest
+# should have a corresponding test manifest that declares that class or defined
+# type.
+#
+# Tests are then run by using puppet apply --noop (to check for compilation
+# errors and view a log of events) or by fully applying the test in a virtual
+# environment (to compare the resulting system state to the desired state).
+#
+# Learn more about module testing here:
+# https://docs.puppet.com/guides/tests_smoke.html
+#
+include ::clonos_userspw

clonos_userspw/manifests/init.pp

@@ -0,0 +1,55 @@
+# Class: clonos_userspw
+# ===========================
+#
+# Full description of class clonos_userspw here.
+#
+# Parameters
+# ----------
+#
+# Document parameters here.
+#
+# * `sample parameter`
+# Explanation of what this parameter affects and what it defaults to.
+# e.g. "Specify one or more upstream ntp servers as an array."
+#
+# Variables
+# ----------
+#
+# Here you should define a list of variables that this module would require.
+#
+# * `sample variable`
+#  Explanation of how this variable affects the function of this class and if
+#  it has a default. e.g. "The parameter enc_ntp_servers must be set by the
+#  External Node Classifier as a comma separated list of hostnames." (Note,
+#  global variables should be avoided in favor of class parameters as
+#  of Puppet 2.6.)
+#
+# Examples
+# --------
+#
+# @example
+#    class { 'clonos_userspw':
+#      servers => [ 'pool.ntp.org', 'ntp.local.company.com' ],
+#    }
+#
+# Authors
+# -------
+#
+# Author Name <author@domain.com>
+#
+# Copyright
+# ---------
+#
+# Copyright 2016 Your name here, unless otherwise noted.
+#
+class clonos_userspw (
+	$root = $clonos_userspw::params::root,
+	$web = $clonos_userspw::params::web,
+) inherits clonos_userspw::params {
+
+	user { "root":
+		ensure => present,
+		password => pw_hash( "$root", 'SHA-512', 'eiBi0ech8a'),
+	}
+
+}

clonos_userspw/manifests/params.pp

@@ -0,0 +1,4 @@
+class clonos_userspw::params {
+	$root = undef
+	$web = undef
+}

clonos_userspw/metadata.json

@@ -0,0 +1,15 @@
+{
+  "name": "clonos-clonos_network",
+  "version": "0.1.0",
+  "author": "clonos",
+  "summary": null,
+  "license": "Apache-2.0",
+  "source": "",
+  "project_page": null,
+  "issues_url": null,
+  "dependencies": [
+    {"name":"puppetlabs-stdlib","version_requirement":">= 1.0.0"}
+  ],
+  "data_provider": null
+}
+

clonos_userspw/spec/classes/init_spec.rb

@@ -0,0 +1,6 @@
+require 'spec_helper'
+describe 'clonos_network' do
+  context 'with default values for all parameters' do
+    it { should contain_class('clonos_network') }
+  end
+end

clonos_userspw/spec/spec_helper.rb

@@ -0,0 +1 @@
+require 'puppetlabs_spec_helper/module_spec_helper'

clonos_zfsinstall/Gemfile

@@ -0,0 +1,18 @@
+source ENV['GEM_SOURCE'] || 'https://rubygems.org'
+
+puppetversion = ENV.key?('PUPPET_VERSION') ? ENV['PUPPET_VERSION'] : ['>= 3.3']
+gem 'metadata-json-lint'
+gem 'puppet', puppetversion
+gem 'puppetlabs_spec_helper', '>= 1.0.0'
+gem 'puppet-lint', '>= 1.0.0'
+gem 'facter', '>= 1.7.0'
+gem 'rspec-puppet'
+
+# rspec must be v2 for ruby 1.8.7
+if RUBY_VERSION >= '1.8.7' && RUBY_VERSION < '1.9'
+  gem 'rspec', '~> 2.0'
+  gem 'rake', '~> 10.0'
+else
+  # rubocop requires ruby >= 1.9
+  gem 'rubocop'
+end

clonos_zfsinstall/README.md

@@ -0,0 +1,83 @@
+# clonos_network
+
+#### Table of Contents
+
+1. [Description](#description)
+1. [Setup - The basics of getting started with clonos_network](#setup)
+    * [What clonos_network affects](#what-clonos_network-affects)
+    * [Setup requirements](#setup-requirements)
+    * [Beginning with clonos_network](#beginning-with-clonos_network)
+1. [Usage - Configuration options and additional functionality](#usage)
+1. [Reference - An under-the-hood peek at what the module is doing and how](#reference)
+1. [Limitations - OS compatibility, etc.](#limitations)
+1. [Development - Guide for contributing to the module](#development)
+
+## Description
+
+Start with a one- or two-sentence summary of what the module does and/or what
+problem it solves. This is your 30-second elevator pitch for your module.
+Consider including OS/Puppet version it works with.
+
+You can give more descriptive information in a second paragraph. This paragraph
+should answer the questions: "What does this module *do*?" and "Why would I use
+it?" If your module has a range of functionality (installation, configuration,
+management, etc.), this is the time to mention it.
+
+## Setup
+
+### What clonos_network affects **OPTIONAL**
+
+If it's obvious what your module touches, you can skip this section. For
+example, folks can probably figure out that your mysql_instance module affects
+their MySQL instances.
+
+If there's more that they should know about, though, this is the place to mention:
+
+* A list of files, packages, services, or operations that the module will alter,
+  impact, or execute.
+* Dependencies that your module automatically installs.
+* Warnings or other important notices.
+
+### Setup Requirements **OPTIONAL**
+
+If your module requires anything extra before setting up (pluginsync enabled,
+etc.), mention it here.
+
+If your most recent release breaks compatibility or requires particular steps
+for upgrading, you might want to include an additional "Upgrading" section
+here.
+
+### Beginning with clonos_network
+
+The very basic steps needed for a user to get the module up and running. This
+can include setup steps, if necessary, or it can be an example of the most
+basic use of the module.
+
+## Usage
+
+This section is where you describe how to customize, configure, and do the
+fancy stuff with your module here. It's especially helpful if you include usage
+examples and code samples for doing things with your module.
+
+## Reference
+
+Here, include a complete list of your module's classes, types, providers,
+facts, along with the parameters for each. Users refer to this section (thus
+the name "Reference") to find specific details; most users don't read it per
+se.
+
+## Limitations
+
+This is where you list OS compatibility, version compatibility, etc. If there
+are Known Issues, you might want to include them under their own heading here.
+
+## Development
+
+Since your module is awesome, other users will want to play with it. Let them
+know what the ground rules for contributing are.
+
+## Release Notes/Contributors/Etc. **Optional**
+
+If you aren't using changelog, put your release notes here (though you should
+consider using changelog). You can also add any additional sections you feel
+are necessary or important to include here. Please use the `## ` header.

clonos_zfsinstall/Rakefile

@@ -0,0 +1,32 @@
+require 'puppetlabs_spec_helper/rake_tasks'
+require 'puppet-lint/tasks/puppet-lint'
+require 'metadata-json-lint/rake_task'
+
+if RUBY_VERSION >= '1.9'
+  require 'rubocop/rake_task'
+  RuboCop::RakeTask.new
+end
+
+PuppetLint.configuration.send('disable_80chars')
+PuppetLint.configuration.relative = true
+PuppetLint.configuration.ignore_paths = ['spec/**/*.pp', 'pkg/**/*.pp']
+
+desc 'Validate manifests, templates, and ruby files'
+task :validate do
+  Dir['manifests/**/*.pp'].each do |manifest|
+    sh "puppet parser validate --noop #{manifest}"
+  end
+  Dir['spec/**/*.rb', 'lib/**/*.rb'].each do |ruby_file|
+    sh "ruby -c #{ruby_file}" unless ruby_file =~ %r{spec/fixtures}
+  end
+  Dir['templates/**/*.erb'].each do |template|
+    sh "erb -P -x -T '-' #{template} | ruby -c"
+  end
+end
+
+desc 'Run metadata_lint, lint, validate, and spec tests.'
+task :test do
+  [:metadata_lint, :lint, :validate, :spec].each do |test|
+    Rake::Task[test].invoke
+  end
+end

clonos_zfsinstall/examples/init.pp

@@ -0,0 +1,12 @@
+# The baseline for module testing used by Puppet Labs is that each manifest
+# should have a corresponding test manifest that declares that class or defined
+# type.
+#
+# Tests are then run by using puppet apply --noop (to check for compilation
+# errors and view a log of events) or by fully applying the test in a virtual
+# environment (to compare the resulting system state to the desired state).
+#
+# Learn more about module testing here:
+# https://docs.puppet.com/guides/tests_smoke.html
+#
+include ::clonos_zfsinstall

clonos_zfsinstall/manifests/init.pp

@@ -0,0 +1,56 @@
+# Class: clonos_zfsinstall
+# ===========================
+#
+# Full description of class clonos_zfsinstall here.
+#
+# Parameters
+# ----------
+#
+# Document parameters here.
+#
+# * `sample parameter`
+# Explanation of what this parameter affects and what it defaults to.
+# e.g. "Specify one or more upstream ntp servers as an array."
+#
+# Variables
+# ----------
+#
+# Here you should define a list of variables that this module would require.
+#
+# * `sample variable`
+#  Explanation of how this variable affects the function of this class and if
+#  it has a default. e.g. "The parameter enc_ntp_servers must be set by the
+#  External Node Classifier as a comma separated list of hostnames." (Note,
+#  global variables should be avoided in favor of class parameters as
+#  of Puppet 2.6.)
+#
+# Examples
+# --------
+#
+# @example
+#    class { 'clonos_zfsinstall':
+#      servers => [ 'pool.ntp.org', 'ntp.local.company.com' ],
+#    }
+#
+# Authors
+# -------
+#
+# Author Name <author@domain.com>
+#
+# Copyright
+# ---------
+#
+# Copyright 2016 Your name here, unless otherwise noted.
+#
+class clonos_zfsinstall (
+	$dsk = $clonos_zfsinstall::params::dsk,
+) inherits clonos_zfsinstall::params {
+
+
+	file { "/tmp/zfsinstall.sh":
+		ensure  => present,
+		content => template("${module_name}/zfsinstall.cfg.erb"),
+		owner => "root",
+		mode => '0555',
+	}
+}

clonos_zfsinstall/manifests/params.pp

@@ -0,0 +1,3 @@
+class clonos_zfsinstall::params {
+	$dsk = undef
+}

clonos_zfsinstall/metadata.json

@@ -0,0 +1,15 @@
+{
+  "name": "clonos-clonos_network",
+  "version": "0.1.0",
+  "author": "clonos",
+  "summary": null,
+  "license": "Apache-2.0",
+  "source": "",
+  "project_page": null,
+  "issues_url": null,
+  "dependencies": [
+    {"name":"puppetlabs-stdlib","version_requirement":">= 1.0.0"}
+  ],
+  "data_provider": null
+}
+

clonos_zfsinstall/spec/classes/init_spec.rb

@@ -0,0 +1,6 @@
+require 'spec_helper'
+describe 'clonos_network' do
+  context 'with default values for all parameters' do
+    it { should contain_class('clonos_network') }
+  end
+end

clonos_zfsinstall/spec/spec_helper.rb

@@ -0,0 +1 @@
+require 'puppetlabs_spec_helper/module_spec_helper'

clonos_zfsinstall/templates/zfsinstall.cfg.erb

@@ -0,0 +1,2 @@
+cbsd zfsinstall devs="<%= @dsk %>" mnt=/mnt pool=clonos ext_populate=/root/popul.sh
+