mirror of
https://github.com/outbackdingo/firezone.git
synced 2026-01-27 18:18:55 +00:00
038aa6b590fb81fa617fda92fe83ed7ac4db72ea
8220 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Eizinger
|
038aa6b590 |
feat(gateway): support systemd credentials (#10538)
For more permanent Gateway installations, or ones that are managed through something else other than our install script, it is useful to define the Gateway's token outside the systemd unit file. Systemd provides support for credentials via the `LoadCredential` and `LoadCredentialEncrypted` instructions. We just need a tiny bit of glue code in the Gateway to actually use that if it is set. --------- Signed-off-by: Thomas Eizinger <thomas@eizinger.io> Co-authored-by: Jamil <jamilbk@users.noreply.github.com> |
||
|
Thomas Eizinger
|
4930aa7956 |
feat: allow setting Internet Resource from headless client (#10553)
Currently, the Internet Resource cannot be toggled on/off in the headless client. With #10509, the default state of the Internet Resource is now disabled, meaning users of the headless client are no longer able to use the Internet Resource. We fix this by introducing a new CLI argument `--activate-internet-resource` that can also be set via the env variable `FIREZONE_ACTIVATE_INTERNET_RESOURCE=true`. Resolves: #8342 |
||
|
Mariusz Klochowicz
|
cb50800d52 |
refactor(apple): Migrate iOS/macOS clients to UniFFI (#10368)
Replace callback-based Adapter with event polling-based AdapterUniFfi This change improves reliability by eliminating callback lifetime issues. |
||
|
Thomas Eizinger
|
039d0be7b8 |
fix(connlib): drop packets with bad source IP on clients (#10552)
When using the Internet Resource, it can happen that Clients are still receiving packets with a source IP that is different from the TUN IP. Such packets are dropped on the Gateway already today and therefore have never been routed to their destination. The Gateway cannot route these packets because the reply packets would have the original source address set as the destination and that one is not unique across all Firezone Clients. Without a unique destination, the Gateway cannot send the packet to the correct Client. Today, these packets are filtered on the Gateway and thus trigger an ICMP error. With the addition of #10462, we create a new flow for each one of these packets. To prevent this spam, we drop such packets early in the Client and don't even route them to the Gateway. |
||
|
Jamil
|
cfc410626c |
chore(portal): remove unused nimble_csv dep (#10548)
This was added I believe to export certain live tables as CSV and won't be used soon. |
||
|
dependabot[bot]
|
aaac95a0b6 |
build(deps): bump next from 15.5.2 to 15.5.3 in /website (#10556)
Bumps [next](https://github.com/vercel/next.js) from 15.5.2 to 15.5.3. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/vercel/next.js/releases">next's releases</a>.</em></p> <blockquote> <h2>v15.5.3</h2> <blockquote> <p>[!NOTE]<br /> This release is backporting bug fixes. It does <strong>not</strong> include all pending features/changes on canary.</p> </blockquote> <h3>Core Changes</h3> <ul> <li>fix: validation return types of pages API routes (<a href="https://redirect.github.com/vercel/next.js/issues/83069">#83069</a>)</li> <li>fix: relative paths in dev in validator.ts (<a href="https://redirect.github.com/vercel/next.js/issues/83073">#83073</a>)</li> <li>fix: remove satisfies keyword from type validation to preserve old TS compatibility (<a href="https://redirect.github.com/vercel/next.js/issues/83071">#83071</a>)</li> </ul> <h3>Credits</h3> <p>Huge thanks to <a href="https://github.com/bgub"><code>@bgub</code></a> for helping!</p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Jamil
|
d329880ec8 |
fix(portal): don't use Web functions from Domain (#10546)
Fixes an issue introduced in #10510 where Web functions (like VerifiedRoutes) cannot be called from Domain because they are not available in the release. This happens to work in dev mode because everything is available under the same dev context. |
||
|
Jamil
|
b61fd20de8 |
chore(portal): remove Jason in favor of JSON (#10550)
Since Elixir 1.18, json encoding and decoding support is included in the standard library. This is built on OTP's native json support which is often faster than other implementations. It mostly has the same API as the popular Jason library, differing mainly in the format of the error responses returned when decoding fails. To minimize dependence on external libraries, we remove the Jason lib in favor of this external dependency. Fixes #8011 |
||
|
Jamil
|
1635c81a69 | chore(portal): remove dead telemetry/timer.ex (#10549) | ||
|
Jamil
|
3a06962497 |
chore(portal): remove unused file_size dep (#10547)
This doesn't appear to be used anywhere and eliminates one compile warning due to the seemingly unmaintained [sizeable](https://github.com/arvidkahl/sizeable) dep. |
||
|
dependabot[bot]
|
d4a3a7404f |
build(deps): bump the aya group in /rust with 5 updates (#10519)
Bumps the aya group in /rust with 5 updates: | Package | From | To | | --- | --- | --- | | [aya](https://github.com/aya-rs/aya) | ``ec3eacc`` | ``fe99fa1`` | | [aya-build](https://github.com/aya-rs/aya) | ``ec3eacc`` | ``fe99fa1`` | | [aya-ebpf](https://github.com/aya-rs/aya) | ``ec3eacc`` | ``fe99fa1`` | | [aya-log](https://github.com/aya-rs/aya) | ``ec3eacc`` | ``fe99fa1`` | | [aya-log-ebpf](https://github.com/aya-rs/aya) | ``ec3eacc`` | ``fe99fa1`` | Updates `aya` from `ec3eacc` to `fe99fa1` <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
ea997146d3 |
build(deps): bump vite from 6.3.5 to 6.3.6 in /rust/gui-client in the npm_and_yarn group across 1 directory (#10545)
Bumps the npm_and_yarn group with 1 update in the /rust/gui-client directory: [vite](https://github.com/vitejs/vite/tree/HEAD/packages/vite). Updates `vite` from 6.3.5 to 6.3.6 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/vitejs/vite/releases">vite's releases</a>.</em></p> <blockquote> <h2>v6.3.6</h2> <p>Please refer to <a href="https://github.com/vitejs/vite/blob/v6.3.6/packages/vite/CHANGELOG.md">CHANGELOG.md</a> for details.</p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/vitejs/vite/blob/v6.3.6/packages/vite/CHANGELOG.md">vite's changelog</a>.</em></p> <blockquote> <h2><!-- raw HTML omitted -->6.3.6 (2025-09-08)<!-- raw HTML omitted --></h2> <ul> <li>fix: apply <code>fs.strict</code> check to HTML files (<a href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/20736">#20736</a>) (<a href=" |
||
|
dependabot[bot]
|
57970c56f1 |
build(deps): bump the tailwind group in /rust/gui-client with 3 updates (#10526)
Bumps the tailwind group in /rust/gui-client with 3 updates: [@tailwindcss/cli](https://github.com/tailwindlabs/tailwindcss/tree/HEAD/packages/@tailwindcss-cli), [@tailwindcss/vite](https://github.com/tailwindlabs/tailwindcss/tree/HEAD/packages/@tailwindcss-vite) and [tailwindcss](https://github.com/tailwindlabs/tailwindcss/tree/HEAD/packages/tailwindcss). Updates `@tailwindcss/cli` from 4.1.12 to 4.1.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/tailwindlabs/tailwindcss/releases"><code>@tailwindcss/cli</code>'s releases</a>.</em></p> <blockquote> <h2>v4.1.13</h2> <h3>Changed</h3> <ul> <li>Drop warning from browser build (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/issues/18731">#18731</a>)</li> <li>Drop exact duplicate declarations when emitting CSS (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/issues/18809">#18809</a>)</li> </ul> <h3>Fixed</h3> <ul> <li>Don't transition <code>visibility</code> when using <code>transition</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18795">#18795</a>)</li> <li>Discard matched variants with unknown named values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18799">#18799</a>)</li> <li>Discard matched variants with non-string values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18799">#18799</a>)</li> <li>Show suggestions for known <code>matchVariant</code> values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18798">#18798</a>)</li> <li>Replace deprecated <code>clip</code> with <code>clip-path</code> in <code>sr-only</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18769">#18769</a>)</li> <li>Hide internal fields from completions in <code>matchUtilities</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18820">#18820</a>)</li> <li>Ignore <code>.vercel</code> folders by default (can be overridden by <code>@source …</code> rules) (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18855">#18855</a>)</li> <li>Consider variants starting with <code>@-</code> to be invalid (e.g. <code>@-2xl:flex</code>) (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18869">#18869</a>)</li> <li>Do not allow custom variants to start or end with a <code>-</code> or <code>_</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18867">#18867</a>, <a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18872">#18872</a>)</li> <li>Upgrade: Migrate <code>aria</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18815">#18815</a>)</li> <li>Upgrade: Migrate <code>data</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18816">#18816</a>)</li> <li>Upgrade: Migrate <code>supports</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18817">#18817</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/tailwindlabs/tailwindcss/blob/main/CHANGELOG.md"><code>@tailwindcss/cli</code>'s changelog</a>.</em></p> <blockquote> <h2>[4.1.13] - 2025-09-03</h2> <h3>Changed</h3> <ul> <li>Drop warning from browser build (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/issues/18731">#18731</a>)</li> <li>Drop exact duplicate declarations when emitting CSS (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/issues/18809">#18809</a>)</li> </ul> <h3>Fixed</h3> <ul> <li>Don't transition <code>visibility</code> when using <code>transition</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18795">#18795</a>)</li> <li>Discard matched variants with unknown named values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18799">#18799</a>)</li> <li>Discard matched variants with non-string values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18799">#18799</a>)</li> <li>Show suggestions for known <code>matchVariant</code> values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18798">#18798</a>)</li> <li>Replace deprecated <code>clip</code> with <code>clip-path</code> in <code>sr-only</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18769">#18769</a>)</li> <li>Hide internal fields from completions in <code>matchUtilities</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18820">#18820</a>)</li> <li>Ignore <code>.vercel</code> folders by default (can be overridden by <code>@source …</code> rules) (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18855">#18855</a>)</li> <li>Consider variants starting with <code>@-</code> to be invalid (e.g. <code>@-2xl:flex</code>) (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18869">#18869</a>)</li> <li>Do not allow custom variants to start or end with a <code>-</code> or <code>_</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18867">#18867</a>, <a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18872">#18872</a>)</li> <li>Upgrade: Migrate <code>aria</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18815">#18815</a>)</li> <li>Upgrade: Migrate <code>data</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18816">#18816</a>)</li> <li>Upgrade: Migrate <code>supports</code> theme keys to <code>@custom-variant</code> (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18817">#18817</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
c5728d2ee6 |
build(deps): bump @fontsource-variable/source-sans-3 from 5.2.8 to 5.2.9 in /rust/gui-client (#10527)
Bumps [@fontsource-variable/source-sans-3](https://github.com/fontsource/font-files/tree/HEAD/fonts/variable/source-sans-3) from 5.2.8 to 5.2.9. <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/fontsource/font-files/commits/HEAD/fonts/variable/source-sans-3">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
5d7a3d1628 |
build(deps): bump @tauri-apps/cli from 2.8.3 to 2.8.4 in /rust/gui-client in the tauri group (#10525)
Bumps the tauri group in /rust/gui-client with 1 update: [@tauri-apps/cli](https://github.com/tauri-apps/tauri). Updates `@tauri-apps/cli` from 2.8.3 to 2.8.4 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/tauri-apps/tauri/releases"><code>@tauri-apps/cli</code>'s releases</a>.</em></p> <blockquote> <h2><code>@tauri-apps/cli</code> v2.8.4</h2> <h2>[2.8.4]</h2> <h3>Enhancements</h3> <ul> <li><a href=" |
||
|
Thomas Eizinger
|
5600011d65 |
fix(connlib): patch mio to resolve panic bug on Windows (#10543)
The `mio` library which underpins `tokio` has a bug on Windows in regards to named pipes where under certain circumstances an "unreachable code" section is entered. See https://github.com/tokio-rs/mio/issues/1819 for the upstream bug report. In this PR, we patch in a fork of `mio` that aims to fix these issues by handling the state transitions more gracefully. I am not a Windows expert by any means so this will need some rigorous testing to make sure the IPC channel between GUI and Tunnel service still works reliably. Related: https://github.com/tokio-rs/mio/pull/1903 |
||
|
dependabot[bot]
|
dce3da91c4 |
build(deps): bump actions/setup-java from 4.7.1 to 5.0.0 in /.github/actions/setup-android (#10529)
Bumps [actions/setup-java](https://github.com/actions/setup-java) from 4.7.1 to 5.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/actions/setup-java/releases">actions/setup-java's releases</a>.</em></p> <blockquote> <h2>v5.0.0</h2> <h2>What's Changed</h2> <h3>Breaking Changes</h3> <ul> <li>Upgrade to node 24 by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/setup-java/pull/888">actions/setup-java#888</a></li> </ul> <p>Make sure your runner is updated to this version or newer to use this release. v2.327.1 <a href="https://github.com/actions/runner/releases/tag/v2.327.1">Release Notes</a></p> <h3>Dependency Upgrades</h3> <ul> <li>Upgrade Publish Immutable Action by <a href="https://github.com/HarithaVattikuti"><code>@HarithaVattikuti</code></a> in <a href="https://redirect.github.com/actions/setup-java/pull/798">actions/setup-java#798</a></li> <li>Upgrade eslint-plugin-jest from 27.9.0 to 28.11.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-java/pull/730">actions/setup-java#730</a></li> <li>Upgrade undici from 5.28.5 to 5.29.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-java/pull/833">actions/setup-java#833</a></li> <li>Upgrade form-data to bring in fix for critical vulnerability by <a href="https://github.com/gowridurgad"><code>@gowridurgad</code></a> in <a href="https://redirect.github.com/actions/setup-java/pull/887">actions/setup-java#887</a></li> <li>Upgrade actions/checkout from 4 to 5 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-java/pull/896">actions/setup-java#896</a></li> </ul> <h3>Bug Fixes</h3> <ul> <li>Prevent default installation of JetBrains pre-releases by <a href="https://github.com/priyagupta108"><code>@priyagupta108</code></a> in <a href="https://redirect.github.com/actions/setup-java/pull/859">actions/setup-java#859</a></li> <li>Improve Error Handling for Setup-Java Action to Help Debug Intermittent Failures by <a href="https://github.com/gowridurgad"><code>@gowridurgad</code></a> in <a href="https://redirect.github.com/actions/setup-java/pull/848">actions/setup-java#848</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/gowridurgad"><code>@gowridurgad</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-java/pull/848">actions/setup-java#848</a></li> <li><a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-java/pull/888">actions/setup-java#888</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/actions/setup-java/compare/v4...v5.0.0">https://github.com/actions/setup-java/compare/v4...v5.0.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Thomas Eizinger
|
448499b13e |
ci: only create data-plane draft release on trigger (#10542)
Right now, draft releases for Gateways and headless-clients are created on each merge to main. For all other components, we only create those when we trigger the workflow for a specific commit. To align this functionality, we split the `_build_artifacts.yml` workflow into two: - `_control-plane.yml` - `_data-plane.yml` Apart from the `sha` input, all inputs only concern the data-plane, therefore massively simplifying the control-plane workflow. Additionally, the control-plane also doesn't have a manual trigger because its artifacts never get released on GitHub. Resolves: #10541 |
||
|
Jamil
|
562a140029 |
chore(website): verify firezone.dev for azure (#10544)
This verifies the firezone.dev domain for use in our prod Azure tenant. |
||
|
Jamil
|
bb089846d7 |
chore(portal): bump phoenix to 1.8 (#10510)
Bumps Phoenix to 1.8 and Phoenix LiveView to 1.1. As part of the bump a number of issues had to be addressed. Comments inline provide more context. Supersedes #10475 Supersedes #10448 |
||
|
Thomas Eizinger
|
5b60d9d64d |
fix(gui-client): don't stop service after upgrade on Fedora (#10539)
On Fedora, when a package gets upgraded, the new package is installed first, followed by the uninstall of the old package. As a result, the `prerm` script is called after the `postinst` script of the new package. In our `prerm` script, we stop the tunnel service. On package upgrades, this results in us stopping the tunnel service after installing the new package, confronting the user with an error that the tunnel service is not running. `rpm` passes arguments to these maintenance scripts. In the case of `prerm`, we receive the count of how many other instances of this packages are installed. To fix this bug, we check whether the first argument to the script is "1", meaning that we are being upgraded and should not stop the tunnel service. |
||
|
Jamil
|
d11bd14fce |
fix(ci): send PR swift builds to testflight (#10536)
Fixes a bug introduced in #8778 that disabled uploading release builds on PR runs to the App Store for TestFlight distribution. |
||
|
dependabot[bot]
|
e2e592301a |
build(deps): bump @fontsource-variable/source-sans-3 from 5.2.8 to 5.2.9 in /elixir/apps/web/assets (#10514)
Bumps [@fontsource-variable/source-sans-3](https://github.com/fontsource/font-files/tree/HEAD/fonts/variable/source-sans-3) from 5.2.8 to 5.2.9. <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/fontsource/font-files/commits/HEAD/fonts/variable/source-sans-3">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
f0726940c9 |
build(deps): bump actions/setup-node from 4.4.0 to 5.0.0 in /.github/actions/setup-node (#10530)
Bumps [actions/setup-node](https://github.com/actions/setup-node) from 4.4.0 to 5.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/actions/setup-node/releases">actions/setup-node's releases</a>.</em></p> <blockquote> <h2>v5.0.0</h2> <h2>What's Changed</h2> <h3>Breaking Changes</h3> <ul> <li>Enhance caching in setup-node with automatic package manager detection by <a href="https://github.com/priya-kinthali"><code>@priya-kinthali</code></a> in <a href="https://redirect.github.com/actions/setup-node/pull/1348">actions/setup-node#1348</a></li> </ul> <p>This update, introduces automatic caching when a valid <code>packageManager</code> field is present in your <code>package.json</code>. This aims to improve workflow performance and make dependency management more seamless. To disable this automatic caching, set <code>package-manager-cache: false</code></p> <pre lang="yaml"><code>steps: - uses: actions/checkout@v5 - uses: actions/setup-node@v5 with: package-manager-cache: false </code></pre> <ul> <li>Upgrade action to use node24 by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/setup-node/pull/1325">actions/setup-node#1325</a></li> </ul> <p>Make sure your runner is on version v2.327.1 or later to ensure compatibility with this release. <a href="https://github.com/actions/runner/releases/tag/v2.327.1">See Release Notes</a></p> <h3>Dependency Upgrades</h3> <ul> <li>Upgrade <code>@octokit/request-error</code> and <code>@actions/github</code> by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-node/pull/1227">actions/setup-node#1227</a></li> <li>Upgrade uuid from 9.0.1 to 11.1.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-node/pull/1273">actions/setup-node#1273</a></li> <li>Upgrade undici from 5.28.5 to 5.29.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-node/pull/1295">actions/setup-node#1295</a></li> <li>Upgrade form-data to bring in fix for critical vulnerability by <a href="https://github.com/gowridurgad"><code>@gowridurgad</code></a> in <a href="https://redirect.github.com/actions/setup-node/pull/1332">actions/setup-node#1332</a></li> <li>Upgrade actions/checkout from 4 to 5 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-node/pull/1345">actions/setup-node#1345</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/priya-kinthali"><code>@priya-kinthali</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-node/pull/1348">actions/setup-node#1348</a></li> <li><a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-node/pull/1325">actions/setup-node#1325</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/actions/setup-node/compare/v4...v5.0.0">https://github.com/actions/setup-node/compare/v4...v5.0.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
709ca25ba0 |
build(deps): bump actions/setup-python from 5.6.0 to 6.0.0 (#10528)
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 5.6.0 to 6.0.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p> <blockquote> <h2>v6.0.0</h2> <h2>What's Changed</h2> <h3>Breaking Changes</h3> <ul> <li>Upgrade to node 24 by <a href="https://github.com/salmanmkc"><code>@salmanmkc</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1164">actions/setup-python#1164</a></li> </ul> <p>Make sure your runner is on version v2.327.1 or later to ensure compatibility with this release. <a href="https://github.com/actions/runner/releases/tag/v2.327.1">See Release Notes</a></p> <h3>Enhancements:</h3> <ul> <li>Add support for <code>pip-version</code> by <a href="https://github.com/priyagupta108"><code>@priyagupta108</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1129">actions/setup-python#1129</a></li> <li>Enhance reading from .python-version by <a href="https://github.com/krystof-k"><code>@krystof-k</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/787">actions/setup-python#787</a></li> <li>Add version parsing from Pipfile by <a href="https://github.com/aradkdj"><code>@aradkdj</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1067">actions/setup-python#1067</a></li> </ul> <h3>Bug fixes:</h3> <ul> <li>Clarify pythonLocation behaviour for PyPy and GraalPy in environment variables by <a href="https://github.com/aparnajyothi-y"><code>@aparnajyothi-y</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1183">actions/setup-python#1183</a></li> <li>Change missing cache directory error to warning by <a href="https://github.com/aparnajyothi-y"><code>@aparnajyothi-y</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1182">actions/setup-python#1182</a></li> <li>Add Architecture-Specific PATH Management for Python with --user Flag on Windows by <a href="https://github.com/aparnajyothi-y"><code>@aparnajyothi-y</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1122">actions/setup-python#1122</a></li> <li>Include python version in PyPy python-version output by <a href="https://github.com/cdce8p"><code>@cdce8p</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1110">actions/setup-python#1110</a></li> <li>Update docs: clarification on pip authentication with setup-python by <a href="https://github.com/priya-kinthali"><code>@priya-kinthali</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1156">actions/setup-python#1156</a></li> </ul> <h3>Dependency updates:</h3> <ul> <li>Upgrade idna from 2.9 to 3.7 in /<strong>tests</strong>/data by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-python/pull/843">actions/setup-python#843</a></li> <li>Upgrade form-data to fix critical vulnerabilities <a href="https://redirect.github.com/actions/setup-python/issues/182">#182</a> & <a href="https://redirect.github.com/actions/setup-python/issues/183">#183</a> by <a href="https://github.com/aparnajyothi-y"><code>@aparnajyothi-y</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1163">actions/setup-python#1163</a></li> <li>Upgrade setuptools to 78.1.1 to fix path traversal vulnerability in PackageIndex.download by <a href="https://github.com/aparnajyothi-y"><code>@aparnajyothi-y</code></a> in <a href="https://redirect.github.com/actions/setup-python/pull/1165">actions/setup-python#1165</a></li> <li>Upgrade actions/checkout from 4 to 5 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-python/pull/1181">actions/setup-python#1181</a></li> <li>Upgrade <code>@actions/tool-cache</code> from 2.0.1 to 2.0.2 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/actions/setup-python/pull/1095">actions/setup-python#1095</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/krystof-k"><code>@krystof-k</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-python/pull/787">actions/setup-python#787</a></li> <li><a href="https://github.com/cdce8p"><code>@cdce8p</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-python/pull/1110">actions/setup-python#1110</a></li> <li><a href="https://github.com/aradkdj"><code>@aradkdj</code></a> made their first contribution in <a href="https://redirect.github.com/actions/setup-python/pull/1067">actions/setup-python#1067</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/actions/setup-python/compare/v5...v6.0.0">https://github.com/actions/setup-python/compare/v5...v6.0.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Thomas Eizinger
|
8ccf8b90bc |
chore(tests): remove comments from regression seeds file (#10534)
Whilst the regression seeds file itself is useful to have a fixed set of tests that are always run, the comments what a specific seed samples to quickly get outdated as the test suite evolves. Therefore, we remove the comments to not confuse developers. |
||
|
Thomas Eizinger
|
1140f6ffa3 |
feat(clients): cache DNS responses (#10533)
Firezone Clients set themselves as the system-wide DNS resolver on startup. This is necessary to intercept queries for DNS resources which resolve to proxy IPs whilst Firezone is active. All DNS queries for non-resources are forwarded to either the resolver defined on the system or the ones defined in the portal (if any). These DNS servers can also be CIDR resources in which cases the queries get forwarded through the tunnel to a Gateway. Right now, the responses from these DNS servers are never cached. DNS is pretty heavily relied on on most systems and having DNS fail or be slow usually results in a bad user experience. To improve on this, we embed a small DNS cache into connlib where for each query, we first try to answer it from the cache. Queries otherwise forwarded to the system/upstream resolver or through the tunnel will see a much improved response time with this change. When serving responses from this cache, the TTL is decremented automatically based on how much time has passed since the entry was first added to the cache. Outside of the response time being ~1ms, this makes the cache fully transparent. Resolves: #10508 |
||
|
Thomas Eizinger
|
8fc2ef8ad1 |
fix(clients): set Internet Resource state on startup (#10509)
Building on top of #10507, setting the initial Internet Resource state is a piece of cake. All we need to do is thread a boolean variable through to all call-sites of `Session::connect`. Without the need for the Internet Resource's ID, we can simply pass in the boolean that is saved in the configuration of each client. Resolves: #10255 |
||
|
Thomas Eizinger
|
36dfee2c42 |
refactor(connlib): explicitly enable/disable Internet Resource (#10507)
Instead of the generic "disable any kind of resource"-functionality that connlib currently exposes, we now provide an API to only enable / disable the Internet Resource. This is a lot simpler to deal with and reason about than the previous system, especially when it comes to the proptests. Those need to model connlib's behaviour correctly across its entire API surface which makes them unnecessarily complex if we only ever use the `set_disabled_resources` API with a single resource. In preparation for #4789, I want to extend the proptests to cover traffic filters (#7126). This will make them a fair bit more complicated, so any prior removal of complexity is appreciated. Simplifying the implementation here is also a good starting point to fix #10255. Not implicitly enabling the Internet Resource when it gets added should be quite simple after this change. Finally, resolving #8885 should also be quite easy. We just need to store the state of the Internet Resource once per API URL instead of globally. Resolves: #8404 --------- Signed-off-by: Thomas Eizinger <thomas@eizinger.io> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Thomas Eizinger
|
4ef827b611 |
ci: revise Rust caching configuration (#10512)
We primarily rely on sccache for speeding up our Rust builds. The `setup-rust-toolchain` action configures `rust-cache` in addition but tries to set it up for the root of the repository which doesn't work in our scenario. It is also unnecessary to set up additional caching for the `target` directory because we use `sccache` anyway. sccache only caches compile artifacts but it can also be beneficial to cache the downloaded Rust sources. Those aren't very big so we use the `rust-cache` action for that but disable the `target` cache. This config option isn't forwarded by `setup-rust-toolchain` so we disable its cache integration and use `rust-cache` directly. |
||
|
dependabot[bot]
|
900186cd63 |
build(deps): bump github.com/getsentry/sentry-cocoa from 8.55.0 to 8.55.1 in /swift/apple/FirezoneKit (#10518)
Bumps [github.com/getsentry/sentry-cocoa](https://github.com/getsentry/sentry-cocoa) from 8.55.0 to 8.55.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/getsentry/sentry-cocoa/releases">github.com/getsentry/sentry-cocoa's releases</a>.</em></p> <blockquote> <h2>8.55.1</h2> <h3>Features</h3> <h3>Fixes</h3> <ul> <li>Fix macOS's frameworks not following the versioned framework structure (<a href="https://redirect.github.com/getsentry/sentry-cocoa/issues/6049">#6049</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Thomas Eizinger
|
531a84268f |
fix(connlib): always process all errors from tunnel (#10500)
In #10347, we made sure that we always return all errors that happen during a single tick of the event-loop. What we overlooked is that as part of handling the errors, we need to use `continue` to jump to the next one instead of returning directly from the function. Signed-off-by: Thomas Eizinger <thomas@eizinger.io> |
||
|
dependabot[bot]
|
e3382a991f |
build(deps): bump com.diffplug.spotless from 7.0.4 to 8.0.0 in /kotlin/android (#10517)
Bumps com.diffplug.spotless from 7.0.4 to 8.0.0. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
9d37dda8af |
build(deps): bump @mdx-js/loader from 3.1.0 to 3.1.1 in /website (#10515)
Bumps [@mdx-js/loader](https://github.com/mdx-js/mdx/tree/HEAD/packages/loader) from 3.1.0 to 3.1.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/mdx-js/mdx/releases"><code>@mdx-js/loader</code>'s releases</a>.</em></p> <blockquote> <h2>3.1.1</h2> <h4>Fix</h4> <ul> <li>3cad7d7e <code>@mdx-js/mdx</code>: add dependency on <code>acorn</code></li> <li>0dc4472f <code>@mdx-js/esbuild</code>: fix crash with esbuild loader and <code>jsx</code> option by <a href="https://github.com/egnor"><code>@egnor</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2593">mdx-js/mdx#2593</a></li> <li>84ec66ef <code>@mdx-js/esbuild</code>: refactor to improve error conversion in esbuild by <a href="https://github.com/egnor"><code>@egnor</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2595">mdx-js/mdx#2595</a></li> <li>2b3381a8 <code>@mdx-js/rollup</code>: fix support for query parameters in Vite by <a href="https://github.com/markdalgleish"><code>@markdalgleish</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2629">mdx-js/mdx#2629</a></li> </ul> <h4>Types</h4> <ul> <li>933ab444 <code>@mdx-js/mdx</code>: add <code>attributes</code> to export/import declarations</li> </ul> <h4>Docs</h4> <ul> <li>c156a1f6 Add <code>rehype-mdx-toc</code> to list of plugin by <a href="https://github.com/boning-w"><code>@boning-w</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2622">mdx-js/mdx#2622</a></li> <li>913659c8 Add <code>recma-module-to-function</code> to list of plugins by <a href="https://github.com/remcohaszing"><code>@remcohaszing</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2605">mdx-js/mdx#2605</a></li> <li>67fb1d07 Remove unneeded JSX type casting in docs, tests</li> <li>f0d20da8 Remove local use of <code>JSX</code> by <a href="https://github.com/remcohaszing"><code>@remcohaszing</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2604">mdx-js/mdx#2604</a></li> <li>63f39cea Remove references to twitter</li> <li>35ac59dd Refactor some docs regarding recma plugins</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/mdx-js/mdx/compare/3.1.0...3.1.1">https://github.com/mdx-js/mdx/compare/3.1.0...3.1.1</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
ba0ee986c5 |
build(deps): bump net.java.dev.jna:jna from 5.17.0 to 5.18.1 in /kotlin/android (#10523)
Bumps [net.java.dev.jna:jna](https://github.com/java-native-access/jna) from 5.17.0 to 5.18.1. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/java-native-access/jna/blob/master/CHANGES.md">net.java.dev.jna:jna's changelog</a>.</em></p> <blockquote> <h1>Release 5.18.1</h1> <h2>Bug Fixes</h2> <ul> <li><a href="https://redirect.github.com/java-native-access/jna/issues/1686">#1686</a>: Fix <code>sortFields</code> race condition while getting fields - <a href="https://github.com/bendk"><code>@bendk</code></a>.</li> </ul> <h1>Release 5.18.0</h1> <h2>Features</h2> <ul> <li><a href="https://redirect.github.com/java-native-access/jna/pull/1671">#1671</a>: Add <code>isRISCV</code> to <code>c.s.j.Platform</code> - <a href="https://github.com/Glavo"><code>@Glavo</code></a>.</li> <li><a href="https://redirect.github.com/java-native-access/jna/pull/1672">#1672</a>: Add <code>CFLocale</code>, <code>CFLocaleCopyCurrent</code>, <code>CFCFDateFormatter</code>, <code>CFDateFormatterStyle</code>, <code>CFDateFormatterCreate</code> and <code>CFDateFormatterGetFormat</code> to <code>c.s.j.p.mac.CoreFoundation</code> - <a href="https://github.com/dbwiddis"><code>@dbwiddis</code></a>.</li> <li><a href="https://redirect.github.com/java-native-access/jna/pull/1669">#1669</a>: Document requirement for running on JDK 24+ - <a href="https://github.com/matthiasblaesing"><code>@matthiasblaesing</code></a>.</li> </ul> <h2>Bug Fixes</h2> <ul> <li><a href="https://redirect.github.com/java-native-access/jna/issues/1681">#1681</a>: Fix deadlock in Structure constructor introduced in 5.16.0 - <a href="https://github.com/brettwooldridge"><code>@brettwooldridge</code></a>.</li> <li><a href="https://redirect.github.com/java-native-access/jna/pull/1683">#1683</a>: Fix native build error on Xcode 16.3 / Apple Clang 17 - <a href="https://github.com/brettwooldridge"><code>@brettwooldridge</code></a>.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
b26af3f60a |
build(deps): bump mixpanel-browser from 2.69.1 to 2.70.0 in /website (#10521)
Bumps [mixpanel-browser](https://github.com/mixpanel/mixpanel-js) from 2.69.1 to 2.70.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/mixpanel/mixpanel-js/releases">mixpanel-browser's releases</a>.</em></p> <blockquote> <h2>v2.8.0: misc. improvements</h2> <ul> <li><code>track_links()</code> and <code>track_forms()</code> can now take raw elements or element lists in addition to query selectors</li> <li>add <code>reset()</code> method to handle logout flow (thanks <a href="https://github.com/stefansedich"><code>@stefansedich</code></a>)</li> <li>catch exceptions during <code>_send_request()</code> (thanks <a href="https://github.com/feychenie"><code>@feychenie</code></a>)</li> <li>fix user agent detection/reporting for Chrome iOS and Firefox iOS</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/mixpanel/mixpanel-js/blob/master/CHANGELOG.md">mixpanel-browser's changelog</a>.</em></p> <blockquote> <p><strong>2.70.0</strong> (4 Sep 2025)</p> <ul> <li>Feature flags requests now send params on query string with GET instead of POST for easier caching</li> </ul> <p><strong>2.68.0</strong> (11 Aug 2025)</p> <ul> <li>Initial rage-click detection support</li> <li>Block <code><audio></code> tags by default in Session Recording</li> <li>Add <code>flags.update_context()</code> method for updating context variables and refetching variants</li> </ul> <p><strong>2.67.0</strong> (17 Jul 2025)</p> <ul> <li>Use <code>get_api_host()</code> consistently across the SDK</li> <li>Include <code>device_id</code> in default Feature Flag context</li> <li>Track latency props in <code>$experiment_started</code> event</li> <li>Fix async behavior in <code>mixpanel.reset()</code> when a session recording is active</li> <li>Fix recorder integration test race conditions</li> </ul> <p><strong>2.66.0</strong> (8 Jul 2025)</p> <ul> <li>Add <code>api_host</code> configuration option to support different hosts/proxies for different endpoints (thanks <a href="https://github.com/chrisknu"><code>@chrisknu</code></a>)</li> <li>Add types.d.ts from existing public repo</li> <li>Fix race condition when calling <code>mixpanel.reset()</code> while a session recording is active</li> </ul> <p><strong>2.65.0</strong> (20 May 2025)</p> <ul> <li><code>mixpanel.people.track_charge()</code> (deprecated) no longer sets profile property</li> <li>Adds page height and width tracking to autocapture click tracking</li> <li>Session recording now stops when mixpanel.reset() is called</li> <li>Support for adding arbitrary query string params to tracking requests (thanks <a href="https://github.com/dylan-asos"><code>@dylan-asos</code></a>)</li> <li>Feature flagging API revisions</li> <li>Whale Browser detection</li> </ul> <p><strong>2.64.0</strong> (15 Apr 2025)</p> <ul> <li>Add <code>record_heatmap_data</code> init option for Session Recording to ensure click events are captured for Heat Maps</li> <li>Initial support for feature flagging</li> </ul> <p><strong>2.63.0</strong> (1 Apr 2025)</p> <ul> <li>Update rrweb to latest alpha version</li> <li>Refactor SDK build process to rely mainly on Rollup</li> </ul> <p><strong>2.62.0</strong> (26 Mar 2025)</p> <ul> <li>Replace UUID generator with UUIDv4 (using native API when available)</li> <li>Consistently use native JSON serialization when available</li> <li>Fix for session recording idle timeout race condition</li> </ul> <p><strong>2.61.2</strong> (14 Mar 2025)</p> <ul> <li>Revert 10ms throttle on enqueueing events to improve tracking reliability on page unload</li> </ul> <p><strong>2.61.1</strong> (11 Mar 2025)</p> <ul> <li>Session recording stops if initial DOM snapshot fails</li> <li>Errors triggered by rrweb's record function are now caught</li> <li>Fix for issue causing opt-out check error messages in <code>debug</code> mode</li> </ul> <p><strong>2.61.0</strong> (6 Mar 2025)</p> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/mixpanel/mixpanel-js/commits/v2.70.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
ce7870ac96 |
build(deps): bump com.google.android.gms:play-services-tasks from 18.3.0 to 18.4.0 in /kotlin/android (#10524)
Bumps com.google.android.gms:play-services-tasks from 18.3.0 to 18.4.0. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
c34d316a7d |
build(deps): bump tailwindcss from 3.4.17 to 3.4.18 in /website (#10520)
Bumps [tailwindcss](https://github.com/tailwindlabs/tailwindcss/tree/HEAD/packages/tailwindcss) from 3.4.17 to 3.4.18. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/tailwindlabs/tailwindcss/releases">tailwindcss's releases</a>.</em></p> <blockquote> <h2>v3.4.18</h2> <h3>Fixed</h3> <ul> <li>Improve support for raw <code>supports-[…]</code> queries in arbitrary values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/13605">#13605</a>)</li> <li>Fix <code>require.cache</code> error when loaded through a TypeScript file in Node 22.18+ (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18665">#18665</a>)</li> <li>Support <code>import.meta.resolve(…)</code> in configs for new enough Node.js versions (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18938">#18938</a>)</li> <li>Allow using newer versions of <code>postcss-load-config</code> for better ESM and TypeScript PostCSS config support with the CLI (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18938">#18938</a>)</li> <li>Remove irrelevant utility rules when matching important classes (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/19030">#19030</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/tailwindlabs/tailwindcss/blob/main/CHANGELOG.md">tailwindcss's changelog</a>.</em></p> <blockquote> <h2>[3.4.18] - 2024-10-01</h2> <h3>Fixed</h3> <ul> <li>Improve support for raw <code>supports-[…]</code> queries in arbitrary values (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/13605">#13605</a>)</li> <li>Fix <code>require.cache</code> error when loaded through a TypeScript file in Node 22.18+ (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18665">#18665</a>)</li> <li>Support <code>import.meta.resolve(…)</code> in configs for new enough Node.js versions (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18938">#18938</a>)</li> <li>Allow using newer versions of <code>postcss-load-config</code> for better ESM and TypeScript PostCSS config support with the CLI (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/18938">#18938</a>)</li> <li>Remove irrelevant utility rules when matching important classes (<a href="https://redirect.github.com/tailwindlabs/tailwindcss/pull/19030">#19030</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li>See full diff in <a href="https://github.com/tailwindlabs/tailwindcss/commits/v3.4.18/packages/tailwindcss">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
dependabot[bot]
|
a2dd1c7941 |
build(deps): bump androidx.test:runner from 1.6.2 to 1.7.0 in /kotlin/android (#10522)
Bumps androidx.test:runner from 1.6.2 to 1.7.0. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
Thomas Eizinger
|
a1b2ca195c |
ci(apple): explicitly select Xcode 26.0 (#10511)
In order to build the iOS app with the Xcode version that is installed on the GitHub runners, we need to select the Xcode version by major and minor version. Currently, the iOS builds are failing because Xcode 26.1 also exists but iOS 26.1 isn't supported (or released?). See https://github.com/firezone/firezone/actions/runs/18239282351/job/51938727311. |
||
|
dependabot[bot]
|
c12f80f6d6 |
build(deps): bump androidx.security:security-crypto from 1.1.0-beta01 to 1.1.0 in /kotlin/android (#10481)
Bumps androidx.security:security-crypto from 1.1.0-beta01 to 1.1.0. [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
Thomas Eizinger
|
e9e8792512 |
feat(connlib): tune down logs for recently disconnected clients (#10501)
When a Client disconnects from a Gateway, we might still be receiving packets that are either in-flight or are still being sent by the resource. For some amount of time after a disconnect, this is expected and not worth logging a warning for. With this PR, we define this time to be 60s. If we cannot look up a connection either by ID, session index or public key but the peer has disconnected within the last 60s, we will now only print a DEBUG log instead of a WARN. Resolves: #10175 |
||
|
Thomas Eizinger
|
2cc13cea24 |
refactor(connlib): set ECN bits directly on Transmit (#10497)
Instead of mirroring the ECN bits of an IP packet on the resulting UDP packet in the event-loop, we can extend `Transmit` with an `ecn` field and directly set it every time we construct a `Transmit`, mirroring the ECN bits from the inner IP packet if the UDP packet contains an encapsulated IP packet. Extracted from #10485 |
||
|
Thomas Eizinger
|
0d61cacb08 |
ci: add 20% jitter in test environment (#10504)
To simulate the real-world more accurately, we add a 20% jitter to the specified latency on the router containers. |
||
|
Thomas Eizinger
|
881514edfc |
fix(connlib): log fragmented IP packets on debug (#10488)
When an application sends UDP packets that are larger than the MTU of the underlying interface, the kernel fragments the packet at the IP level. Firezone does not support fragmented IP packets because we need to pack each IP packet into a UDP packet. Right now, we don't check for fragmented IP packets which results in packet parsing errors because the slice we are trying to parse the packet from is not long enough. To avoid spamming Sentry in these cases, we explicitly check for fragmented IP packets and only log those on DEBUG. Resolves: #10335 |
||
|
dependabot[bot]
|
815add151f |
build(deps): bump zbus from 5.9.0 to 5.11.0 in /rust (#10453)
Bumps [zbus](https://github.com/dbus2/zbus) from 5.9.0 to 5.11.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dbus2/zbus/releases">zbus's releases</a>.</em></p> <blockquote> <h2>🔖 zbus 5.11.0</h2> <ul> <li>✨ API to specify timeouts for method calls. Add a way to specify an timeout for method calls. If set, the method calls will timeout after the specified duration, returning an error. This can be used to handle the issues with non-answering D-Bus services.</li> <li>🩹 Add <code>connection::socket::Split::new</code> method, allowing <code>Socket</code> trait impls outside zbus.</li> <li>📝 Mention receive_X_changes in <code>proxy</code> docs.</li> </ul> <h2>🔖 zbus 5.10.0</h2> <ul> <li>✨ Property stream will now first yield the current value.</li> <li>🐛 Fall back to no groups rather than erroring out for peer creds.</li> <li>📝 Fix wrong documentation in blocking <code>Proxy</code> methods.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Mariusz Klochowicz
|
13851c8fd7 |
chore: bump Xcode version (#10499)
Use latest Xcode 26.0, which is now officially available on the same macos-15 runner. |
||
|
dependabot[bot]
|
de33774183 |
build(deps): bump sentry from 11.0.2 to 11.0.3 in /elixir (#10477)
Bumps [sentry](https://github.com/getsentry/sentry-elixir) from 11.0.2 to 11.0.3. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/getsentry/sentry-elixir/releases">sentry's releases</a>.</em></p> <blockquote> <h2>11.0.3</h2> <h4>Various improvements</h4> <ul> <li>Allow any version of opentelemetry deps and verify minimum versions internally - this makes it possible to use <code>sentry</code> <em>with tracing disabled</em> along with older versions of opentelemetry deps (<a href="https://redirect.github.com/getsentry/sentry-elixir/pull/931">#931</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/getsentry/sentry-elixir/blob/master/CHANGELOG.md">sentry's changelog</a>.</em></p> <blockquote> <h2>11.0.3</h2> <h4>Various improvements</h4> <ul> <li>Allow any version of opentelemetry deps and verify minimum versions internally - this makes it possible to use <code>sentry</code> <em>with tracing disabled</em> along with older versions of opentelemetry deps (<a href="https://redirect.github.com/getsentry/sentry-elixir/pull/931">#931</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
dependabot[bot]
|
06f02a809f |
build(deps): bump @mdx-js/react from 3.1.0 to 3.1.1 in /website (#10479)
Bumps [@mdx-js/react](https://github.com/mdx-js/mdx/tree/HEAD/packages/react) from 3.1.0 to 3.1.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/mdx-js/mdx/releases"><code>@mdx-js/react</code>'s releases</a>.</em></p> <blockquote> <h2>3.1.1</h2> <h4>Fix</h4> <ul> <li>3cad7d7e <code>@mdx-js/mdx</code>: add dependency on <code>acorn</code></li> <li>0dc4472f <code>@mdx-js/esbuild</code>: fix crash with esbuild loader and <code>jsx</code> option by <a href="https://github.com/egnor"><code>@egnor</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2593">mdx-js/mdx#2593</a></li> <li>84ec66ef <code>@mdx-js/esbuild</code>: refactor to improve error conversion in esbuild by <a href="https://github.com/egnor"><code>@egnor</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2595">mdx-js/mdx#2595</a></li> <li>2b3381a8 <code>@mdx-js/rollup</code>: fix support for query parameters in Vite by <a href="https://github.com/markdalgleish"><code>@markdalgleish</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2629">mdx-js/mdx#2629</a></li> </ul> <h4>Types</h4> <ul> <li>933ab444 <code>@mdx-js/mdx</code>: add <code>attributes</code> to export/import declarations</li> </ul> <h4>Docs</h4> <ul> <li>c156a1f6 Add <code>rehype-mdx-toc</code> to list of plugin by <a href="https://github.com/boning-w"><code>@boning-w</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2622">mdx-js/mdx#2622</a></li> <li>913659c8 Add <code>recma-module-to-function</code> to list of plugins by <a href="https://github.com/remcohaszing"><code>@remcohaszing</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2605">mdx-js/mdx#2605</a></li> <li>67fb1d07 Remove unneeded JSX type casting in docs, tests</li> <li>f0d20da8 Remove local use of <code>JSX</code> by <a href="https://github.com/remcohaszing"><code>@remcohaszing</code></a> in <a href="https://redirect.github.com/mdx-js/mdx/pull/2604">mdx-js/mdx#2604</a></li> <li>63f39cea Remove references to twitter</li> <li>35ac59dd Refactor some docs regarding recma plugins</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/mdx-js/mdx/compare/3.1.0...3.1.1">https://github.com/mdx-js/mdx/compare/3.1.0...3.1.1</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href=" |
||
|
Thomas Eizinger
|
b4fae701ec |
ci: silence 429s errors in link checker (#10495)
Until https://github.com/lycheeverse/lychee/pull/1844 is shipped, we silence 429s as valid status codes whenever links are being checked by lychee. |