scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-09 00:51:29 +00:00
Code Issues Packages Projects Releases Wiki Activity

stm32: add wakeup from serial port as a debug feature

Browse Source 
When STOP mode is activated, the UART is not able to wakeup the EC when
sleeping, preventing to enter commands on the EC serial console.
Allow to switch the UART RX line as a GPIO connected to EXTINT10 to
wakeup the system on incoming character.

This is just a debug feature since EXTINT10 is normally used to scan the
keyboard.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>

BUG=chrome-os-partner:8866
TEST=on Snow, enable CONFIG_FORCE_CONSOLE_RESUME at build time and type
"sleepmask 0" on the EC console, see I can get the serial console back
by typing a character on the serial console.

Change-Id: I936cbf13707ef8cde277f1053a4d35d23ff06511
Reviewed-on: https://gerrit.chromium.org/gerrit/29776
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
This commit is contained in:
Vincent Palatin
2012-08-09 17:09:38 +00:00
committed by Gerrit
parent 3c708cb802
commit 019f50590e
1 changed files with 38 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

38
chip/stm32/clock-stm32f100.c
View File

@@ -20,6 +20,9 @@
#include "timer.h"
#include "util.h"
/* Allow serial console to wake up the EC from STOP mode */
/* #define CONFIG_FORCE_CONSOLE_RESUME */
/**
* minimum delay to enter stop mode
* STOP mode wakeup time with regulator in low power mode is 5 us.
@@ -153,6 +156,36 @@ static void config_hispeed_clock(void)
}
#ifdef CONFIG_LOW_POWER_IDLE
#ifdef CONFIG_FORCE_CONSOLE_RESUME
static void enable_serial_wakeup(int enable)
{
static uint32_t save_crh, save_exticr;
if (enable) {
/**
* allow to wake up from serial port (RX on pin PA10)
* by setting it as a GPIO with an external interrupt.
*/
save_crh = STM32_GPIO_CRH_OFF(GPIO_A);
save_exticr = STM32_AFIO_EXTICR(10 / 4);
STM32_GPIO_CRH_OFF(GPIO_A) = (save_crh & ~0xf00) | 0x400;
STM32_AFIO_EXTICR(10 / 4) = (save_exticr & ~(0xf << 8));
} else {
/* serial port wake up : don't go back to sleep */
if (STM32_EXTI_PR & (1 << 10))
disable_sleep(SLEEP_MASK_FORCE);
/* restore keyboard external IT on PC10 */
STM32_GPIO_CRH_OFF(GPIO_A) = save_crh;
STM32_AFIO_EXTICR(10 / 4) = save_exticr;
}
}
#else
static void enable_serial_wakeup(int enable)
{
}
#endif
/* Idle task. Executed when no tasks are ready to be scheduled. */
void __idle(void)
{
@@ -169,6 +202,8 @@ void __idle(void)
if (!sleep_mask && (next_delay > STOP_MODE_LATENCY)) {
/* deep-sleep in STOP mode */
enable_serial_wakeup(1);
/* set deep sleep bit */
CPU_SCB_SYSCTRL |= 0x4;
@@ -176,6 +211,9 @@ void __idle(void)
asm("wfi");
CPU_SCB_SYSCTRL &= ~0x4;
enable_serial_wakeup(0);
/* re-lock the PLL */
config_hispeed_clock();