scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-06 15:01:35 +00:00
Code Issues Packages Projects Releases Wiki Activity

Remove board 'wolf' from master/ToT branch.

Browse Source 
Firmware development for this board is happening on the
firmware-wolf-4389.24.B branch.

BUG=chrome-os-partner:21815
BRANCH=None
TEST=Run util/make_all.sh. Verify all is made.

Change-Id: I4b58a982a87562231453f3f201024b809c6a24fb
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65514
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This commit is contained in:
Dave Parker
2013-08-10 12:37:42 -07:00
committed by ChromeBot
parent 0c8c2e453a
commit 2de1f07579
8 changed files with 3 additions and 480 deletions
Download Patch File Download Diff File Expand all files Collapse all files

229
board/wolf/board.c
View File

@@ -1,229 +0,0 @@
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* EC for Wolf board configuration */
#include "adc.h"
#include "backlight.h"
#include "chip_temp_sensor.h"
#include "chipset_haswell.h"
#include "chipset_x86_common.h"
#include "common.h"
#include "ec_commands.h"
#include "extpower.h"
#include "gpio.h"
#include "host_command.h"
#include "i2c.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "lm4_adc.h"
#include "peci.h"
#include "power_button.h"
#include "registers.h"
#include "switch.h"
#include "temp_sensor.h"
#include "temp_sensor_g781.h"
#include "timer.h"
#include "util.h"
/* GPIO signal list. Must match order from enum gpio_signal. */
const struct gpio_info gpio_list[] = {
/* Inputs with interrupt handlers are first for efficiency */
{"POWER_BUTTON_L", LM4_GPIO_A, (1<<2), GPIO_INT_BOTH,
power_button_interrupt},
{"LID_OPEN", LM4_GPIO_A, (1<<3), GPIO_INT_BOTH,
lid_interrupt},
{"AC_PRESENT", LM4_GPIO_H, (1<<3), GPIO_INT_BOTH,
extpower_interrupt},
{"PCH_BKLTEN", LM4_GPIO_M, (1<<3), GPIO_INT_BOTH,
backlight_interrupt},
{"PCH_SLP_S0_L", LM4_GPIO_G, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_SLP_S3_L", LM4_GPIO_G, (1<<7), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_SLP_S5_L", LM4_GPIO_H, (1<<1), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_SLP_SUS_L", LM4_GPIO_G, (1<<3), GPIO_INT_BOTH,
x86_interrupt},
{"PP1050_PGOOD", LM4_GPIO_H, (1<<4), GPIO_INT_BOTH,
x86_interrupt},
{"PP1350_PGOOD", LM4_GPIO_H, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PP5000_PGOOD", LM4_GPIO_N, (1<<0), GPIO_INT_BOTH,
x86_interrupt},
{"VCORE_PGOOD", LM4_GPIO_C, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_EDP_VDD_EN", LM4_GPIO_J, (1<<1), GPIO_INT_BOTH,
haswell_interrupt},
{"RECOVERY_L", LM4_GPIO_A, (1<<5), GPIO_PULL_UP|GPIO_INT_BOTH,
switch_interrupt},
{"WP_L", LM4_GPIO_A, (1<<4), GPIO_INT_BOTH,
switch_interrupt},
/* Other inputs */
{"FAN_ALERT_L", LM4_GPIO_B, (1<<0), GPIO_INPUT, NULL},
{"PCH_SUSWARN_L", LM4_GPIO_G, (1<<2), GPIO_INT_BOTH, NULL},
{"USB1_OC_L", LM4_GPIO_E, (1<<7), GPIO_INPUT, NULL},
{"USB2_OC_L", LM4_GPIO_E, (1<<0), GPIO_INPUT, NULL},
{"BOARD_VERSION1", LM4_GPIO_Q, (1<<5), GPIO_INPUT, NULL},
{"BOARD_VERSION2", LM4_GPIO_Q, (1<<6), GPIO_INPUT, NULL},
{"BOARD_VERSION3", LM4_GPIO_Q, (1<<7), GPIO_INPUT, NULL},
{"CPU_PGOOD", LM4_GPIO_C, (1<<4), GPIO_INPUT, NULL},
/* Outputs; all unasserted by default except for reset signals */
{"CPU_PROCHOT", LM4_GPIO_B, (1<<1), GPIO_OUT_LOW, NULL},
{"PP1350_EN", LM4_GPIO_H, (1<<5), GPIO_OUT_LOW, NULL},
{"PP3300_DSW_GATED_EN", LM4_GPIO_J, (1<<3), GPIO_OUT_LOW, NULL},
{"PP3300_DX_EN", LM4_GPIO_J, (1<<2), GPIO_OUT_LOW, NULL},
{"PP3300_LTE_EN", LM4_GPIO_D, (1<<2), GPIO_OUT_LOW, NULL},
{"PP3300_WLAN_EN", LM4_GPIO_J, (1<<0), GPIO_OUT_LOW, NULL},
{"SUSP_VR_EN", LM4_GPIO_C, (1<<7), GPIO_OUT_LOW, NULL},
{"VCORE_EN", LM4_GPIO_C, (1<<5), GPIO_OUT_LOW, NULL},
{"PP5000_EN", LM4_GPIO_H, (1<<7), GPIO_OUT_LOW, NULL},
{"SYS_PWROK", LM4_GPIO_H, (1<<2), GPIO_OUT_LOW, NULL},
{"WLAN_OFF_L", LM4_GPIO_J, (1<<4), GPIO_OUT_LOW, NULL},
{"CHARGE_L", LM4_GPIO_E, (1<<6), GPIO_OUT_LOW, NULL},
{"ENABLE_BACKLIGHT", LM4_GPIO_M, (1<<7), GPIO_OUT_LOW, NULL},
{"ENABLE_TOUCHPAD", LM4_GPIO_N, (1<<1), GPIO_OUT_LOW, NULL},
{"ENTERING_RW", LM4_GPIO_D, (1<<3), GPIO_OUT_LOW, NULL},
{"PCH_DPWROK", LM4_GPIO_G, (1<<0), GPIO_OUT_LOW, NULL},
/*
* HDA_SDO is technically an output, but we need to leave it as an
* input until we drive it high. So can't use open-drain (HI_Z).
*/
{"PCH_HDA_SDO", LM4_GPIO_G, (1<<1), GPIO_INPUT, NULL},
{"PCH_WAKE_L", LM4_GPIO_F, (1<<0), GPIO_OUT_HIGH, NULL},
{"PCH_NMI_L", LM4_GPIO_F, (1<<2), GPIO_OUT_HIGH, NULL},
{"PCH_PWRBTN_L", LM4_GPIO_H, (1<<0), GPIO_OUT_HIGH, NULL},
{"PCH_PWROK", LM4_GPIO_F, (1<<5), GPIO_OUT_LOW, NULL},
/* FIXME: Why does PL6 not honor open drain semantics? Setting it to 1
* drives the pin low while setting it to 0 drives the pin high. To
* work around this PCH_RCIN_L is set to an input. It will only
* be set to an output when it needs to be driven to 0. */
{"PCH_RCIN_L", LM4_GPIO_L, (1<<6), GPIO_INPUT, NULL},
{"PCH_RSMRST_L", LM4_GPIO_F, (1<<1), GPIO_OUT_LOW, NULL},
{"PCH_SMI_L", LM4_GPIO_F, (1<<4), GPIO_ODR_HIGH, NULL},
{"TOUCHSCREEN_RESET_L", LM4_GPIO_N, (1<<7), GPIO_OUT_LOW, NULL},
{"EC_EDP_VDD_EN", LM4_GPIO_J, (1<<5), GPIO_OUT_LOW, NULL},
{"LPC_CLKRUN_L", LM4_GPIO_M, (1<<2), GPIO_ODR_HIGH, NULL},
{"USB1_ENABLE", LM4_GPIO_E, (1<<4), GPIO_OUT_LOW, NULL},
{"USB2_ENABLE", LM4_GPIO_D, (1<<5), GPIO_OUT_LOW, NULL},
{"PCH_SUSACK_L", LM4_GPIO_F, (1<<3), GPIO_OUT_HIGH, NULL},
{"PCH_RTCRST_L", LM4_GPIO_F, (1<<6), GPIO_ODR_HIGH, NULL},
{"PCH_SRTCRST_L", LM4_GPIO_F, (1<<7), GPIO_ODR_HIGH, NULL},
{"BAT_LED0_L", LM4_GPIO_N, (1<<6), GPIO_ODR_HIGH, NULL},
{"BAT_LED1_L", LM4_GPIO_N, (1<<4), GPIO_ODR_HIGH, NULL},
};
BUILD_ASSERT(ARRAY_SIZE(gpio_list) == GPIO_COUNT);
/* Pins with alternate functions */
const struct gpio_alt_func gpio_alt_funcs[] = {
{GPIO_A, 0x03, 1, MODULE_UART}, /* UART0 */
{GPIO_B, 0x04, 3, MODULE_I2C}, /* I2C0 SCL */
{GPIO_B, 0x08, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C0 SDA */
{GPIO_B, 0x40, 3, MODULE_I2C}, /* I2C5 SCL */
{GPIO_B, 0x80, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C5 SDA */
{GPIO_G, 0x30, 1, MODULE_UART}, /* UART2 */
{GPIO_J, 0x40, 1, MODULE_PECI}, /* PECI Tx */
{GPIO_J, 0x80, 0, MODULE_PECI, GPIO_ANALOG}, /* PECI Rx */
{GPIO_L, 0x3f, 15, MODULE_LPC}, /* LPC */
{GPIO_M, 0x33, 15, MODULE_LPC}, /* LPC */
{GPIO_N, 0x0c, 1, MODULE_PWM_FAN}, /* Fan0 PWM/tach */
};
const int gpio_alt_funcs_count = ARRAY_SIZE(gpio_alt_funcs);
/* x86 signal list. Must match order of enum x86_signal. */
const struct x86_signal_info x86_signal_list[] = {
{GPIO_PP5000_PGOOD, 1, "PGOOD_PP5000"},
{GPIO_PP1350_PGOOD, 1, "PGOOD_PP1350"},
{GPIO_PP1050_PGOOD, 1, "PGOOD_PP1050"},
{GPIO_VCORE_PGOOD, 1, "PGOOD_VCORE"},
{GPIO_PCH_SLP_S0_L, 1, "SLP_S0#_DEASSERTED"},
{GPIO_PCH_SLP_S3_L, 1, "SLP_S3#_DEASSERTED"},
{GPIO_PCH_SLP_S5_L, 1, "SLP_S5#_DEASSERTED"},
{GPIO_PCH_SLP_SUS_L, 1, "SLP_SUS#_DEASSERTED"},
};
BUILD_ASSERT(ARRAY_SIZE(x86_signal_list) == X86_SIGNAL_COUNT);
/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
const struct adc_t adc_channels[] = {
/* EC internal temperature is calculated by
* 273 + (295 - 450 * ADC_VALUE / ADC_READ_MAX) / 2
* = -225 * ADC_VALUE / ADC_READ_MAX + 420.5
*/
{"ECTemp", LM4_ADC_SEQ0, -225, ADC_READ_MAX, 420,
LM4_AIN_NONE, 0x0e /* TS0 | IE0 | END0 */, 0, 0},
/* IOUT == ICMNT is on PE3/AIN0 */
/* We have 0.01-ohm resistors, and IOUT is 20X the differential
* voltage, so 1000mA ==> 200mV.
* ADC returns 0x000-0xFFF, which maps to 0.0-3.3V (as configured).
* mA = 1000 * ADC_VALUE / ADC_READ_MAX * 3300 / 200
*/
{"ChargerCurrent", LM4_ADC_SEQ1, 33000, ADC_READ_MAX * 2, 0,
LM4_AIN(0), 0x06 /* IE0 | END0 */, LM4_GPIO_E, (1<<3)},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
/* Note: battery and charger share a port. Only include it once in
* this list so we don't double-initialize it. */
{"batt_chg", I2C_PORT_BATTERY, 100},
{"thermal", I2C_PORT_THERMAL, 100},
};
BUILD_ASSERT(ARRAY_SIZE(i2c_ports) == I2C_PORTS_USED);
/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
const struct temp_sensor_t temp_sensors[] = {
{"PECI", TEMP_SENSOR_TYPE_CPU, peci_temp_sensor_get_val, 0, 2},
{"ECInternal", TEMP_SENSOR_TYPE_BOARD, chip_temp_sensor_get_val, 0, 4},
{"G781Internal", TEMP_SENSOR_TYPE_BOARD, g781_get_val, 0, 4},
{"G781External", TEMP_SENSOR_TYPE_BOARD, g781_get_val, 1, 4},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
struct keyboard_scan_config keyscan_config = {
.output_settle_us = 40,
.debounce_down_us = 6 * MSEC,
.debounce_up_us = 30 * MSEC,
.scan_period_us = 1500,
.min_post_scan_delay_us = 1000,
.poll_timeout_us = SECOND,
.actual_key_mask = {
0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */
},
};
/**
* Perform necessary actions on host wake events.
*/
void board_process_wake_events(uint32_t active_wake_events)
{
uint32_t power_button_mask;
power_button_mask = EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON);
/* If there are other events aside from the power button press drive
* the wake pin. Otherwise ensure it is high. */
if (active_wake_events & ~power_button_mask)
gpio_set_level(GPIO_PCH_WAKE_L, 0);
else
gpio_set_level(GPIO_PCH_WAKE_L, 1);
}
/**
* Board-specific g781 power state.
*/
int board_g781_has_power(void)
{
return gpio_get_level(GPIO_PP3300_DX_EN);
}

201
board/wolf/board.h
View File

@@ -1,201 +0,0 @@
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Configuration for Wolf mainboard */
#ifndef __BOARD_H
#define __BOARD_H
/* Optional features */
#define CONFIG_BACKLIGHT_X86
#define CONFIG_BATTERY_SMART
#define CONFIG_BOARD_VERSION
#define CONFIG_CHARGER
#define CONFIG_CHARGER_BQ24707A
#define CONFIG_CHIPSET_HASWELL
#define CONFIG_CHIPSET_X86
#define CONFIG_EXTPOWER_GPIO
#define CONFIG_KEYBOARD_BOARD_CONFIG
#define CONFIG_KEYBOARD_PROTOCOL_8042
#define CONFIG_POWER_BUTTON
#define CONFIG_POWER_BUTTON_X86
#define CONFIG_PWM_FAN
#define CONFIG_TEMP_SENSOR
#define CONFIG_UART_HOST 2
#define CONFIG_TEMP_SENSOR_G781
#define CONFIG_USB_PORT_POWER_DUMB
#define CONFIG_WIRELESS
#ifndef __ASSEMBLER__
/* Module IDs */
/* TODO(rspangler): use this in place of enum console_channel as well */
enum module_id {
MODULE_I2C,
MODULE_LPC,
MODULE_PECI,
MODULE_PWM_FAN,
MODULE_UART,
};
/* PWM channels */
#define FAN_CH_CPU 2 /* CPU fan */
#define FAN_CH_BL_DISPLAY 4 /* LVDS backlight (from PCH, cleaned by EC) */
/* I2C ports */
#define I2C_PORT_BATTERY 0
#define I2C_PORT_CHARGER 0
#define I2C_PORT_THERMAL 5
/* There are only two I2C ports used because battery and charger share a port */
#define I2C_PORTS_USED 2
/* 13x8 keyboard scanner uses an entire GPIO bank for row inputs */
#define KB_SCAN_ROW_IRQ LM4_IRQ_GPIOK
#define KB_SCAN_ROW_GPIO LM4_GPIO_K
/* Host connects to keyboard controller module via LPC */
#define HOST_KB_BUS_LPC
/* USB ports */
#define USB_PORT_COUNT 2
/* GPIO signal definitions. */
enum gpio_signal {
/* Inputs with interrupt handlers are first for efficiency */
GPIO_POWER_BUTTON_L = 0, /* Power button */
GPIO_LID_OPEN, /* Lid switch */
GPIO_AC_PRESENT, /* AC power present */
GPIO_PCH_BKLTEN, /* Backlight enable signal from PCH */
GPIO_PCH_SLP_S0_L, /* SLP_S0# signal from PCH */
GPIO_PCH_SLP_S3_L, /* SLP_S3# signal from PCH */
GPIO_PCH_SLP_S5_L, /* SLP_S5# signal from PCH */
GPIO_PCH_SLP_SUS_L, /* SLP_SUS# signal from PCH */
GPIO_PP1050_PGOOD, /* Power good on 1.05V */
GPIO_PP1350_PGOOD, /* Power good on 1.35V (DRAM) */
GPIO_PP5000_PGOOD, /* Power good on 5V */
GPIO_VCORE_PGOOD, /* Power good on core VR */
GPIO_PCH_EDP_VDD_EN, /* PCH wants EDP enabled */
GPIO_RECOVERY_L, /* Recovery signal from servo */
GPIO_WP_L, /* Write protect input */
/* Other inputs */
GPIO_FAN_ALERT_L, /* From thermal sensor */
GPIO_PCH_SUSWARN_L, /* SUSWARN# signal from PCH */
GPIO_USB1_OC_L, /* USB port overcurrent warning */
GPIO_USB2_OC_L, /* USB port overcurrent warning */
GPIO_BOARD_VERSION1, /* Board version stuffing resistor 1 */
GPIO_BOARD_VERSION2, /* Board version stuffing resistor 2 */
GPIO_BOARD_VERSION3, /* Board version stuffing resistor 3 */
GPIO_CPU_PGOOD, /* Power good to the CPU */
/* Outputs */
GPIO_CPU_PROCHOT, /* Force CPU to think it's overheated */
GPIO_PP1350_EN, /* Enable 1.35V supply */
GPIO_PP3300_DSW_GATED_EN, /* Enable DSW rails */
GPIO_PP3300_DX_EN, /* Enable power to lots of peripherals */
GPIO_PP3300_LTE_EN, /* Enable LTE radio */
GPIO_PP3300_WLAN_EN, /* Enable WiFi power */
GPIO_SUSP_VR_EN, /* Enable 1.05V regulator */
GPIO_VCORE_EN, /* Stuffing option - not connected */
GPIO_PP5000_EN, /* Enable 5V supply */
GPIO_SYS_PWROK, /* EC thinks everything is up and ready */
GPIO_WLAN_OFF_L, /* Disable WiFi radio */
GPIO_CHARGE_L, /* Allow battery to charge when on AC */
GPIO_ENABLE_BACKLIGHT, /* Enable backlight power */
GPIO_ENABLE_TOUCHPAD, /* Enable touchpad power */
GPIO_ENTERING_RW, /* Indicate when EC is entering RW code */
GPIO_PCH_DPWROK, /* Indicate when VccDSW is good */
GPIO_PCH_HDA_SDO, /* HDA_SDO signal to PCH; when high, ME
* ignores security descriptor */
GPIO_PCH_WAKE_L, /* Wake signal from EC to PCH */
GPIO_PCH_NMI_L, /* Non-maskable interrupt pin to PCH */
GPIO_PCH_PWRBTN_L, /* Power button output to PCH */
GPIO_PCH_PWROK, /* PWROK / APWROK signals to PCH */
GPIO_PCH_RCIN_L, /* RCIN# line to PCH (for 8042 emulation) */
GPIO_PCH_RSMRST_L, /* Reset PCH resume power plane logic */
GPIO_PCH_SMI_L, /* System management interrupt to PCH */
GPIO_TOUCHSCREEN_RESET_L, /* Reset touch screen */
GPIO_EC_EDP_VDD_EN, /* Enable EDP (passthru from PCH) */
GPOI_LPC_CLKRUN_L, /* Dunno. Probably important, though. */
GPIO_USB1_ENABLE, /* USB port 1 output power enable */
GPIO_USB2_ENABLE, /* USB port 2 output power enable */
GPIO_PCH_SUSACK_L, /* Acknowledge PCH SUSWARN# signal */
GPIO_PCH_RTCRST_L, /* Not supposed to be here */
GPIO_PCH_SRTCRST_L, /* Not supposed to be here */
GPIO_BAT_LED0_L, /* Battery charging LED - Blue */
GPIO_BAT_LED1_L, /* Battery charging LED - Amber */
/* Number of GPIOs; not an actual GPIO */
GPIO_COUNT
};
/* x86 signal definitions */
enum x86_signal {
X86_PGOOD_PP5000 = 0,
X86_PGOOD_PP1350,
X86_PGOOD_PP1050,
X86_PGOOD_VCORE,
X86_PCH_SLP_S0n_DEASSERTED,
X86_PCH_SLP_S3n_DEASSERTED,
X86_PCH_SLP_S5n_DEASSERTED,
X86_PCH_SLP_SUSn_DEASSERTED,
/* Number of X86 signals */
X86_SIGNAL_COUNT
};
/* Charger module */
#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 /* Input sensor resistor, mOhm */
/*FIXME needed to be checked, use the same as Peppy*/
#define CONFIG_CHARGER_INPUT_CURRENT 3078 /* mA, need be checked */
enum adc_channel {
/* EC internal die temperature in degrees K. */
ADC_CH_EC_TEMP = 0,
/* HEY: Be prepared to read this (ICMNT). */
/* Charger current in mA. */
ADC_CH_CHARGER_CURRENT,
ADC_CH_COUNT
};
enum temp_sensor_id {
/* CPU die temperature via PECI */
TEMP_SENSOR_CPU_PECI = 0,
/* EC internal temperature sensor */
TEMP_SENSOR_EC_INTERNAL,
/* G781 internal and external sensors */
TEMP_SENSOR_I2C_G781_INTERNAL,
TEMP_SENSOR_I2C_G781_EXTERNAL,
TEMP_SENSOR_COUNT
};
/**
* Board-specific g781 power state.
*/
int board_g781_has_power(void);
/* Target value for BOOTCFG. This is set to PE2/USB1_CTL1, which has an external
* pullup. If this signal is pulled to ground when the EC boots, the EC will get
* into the boot loader and we can recover bricked EC. */
#define BOOTCFG_VALUE 0x7fff88fe
/* Wireless signals */
#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L
#define WIRELESS_GPIO_WWAN GPIO_PP3300_LTE_EN
#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_WLAN_EN
#endif /* !__ASSEMBLER__ */
#endif /* __BOARD_H */

12
board/wolf/build.mk
View File

@@ -1,12 +0,0 @@
# -*- makefile -*-
# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# Board specific files build
#
# the IC is TI Stellaris LM4
CHIP:=lm4
board-y=board.o

29
board/wolf/ec.tasklist
View File

@@ -1,29 +0,0 @@
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/**
* List of enabled tasks in the priority order
*
* The first one has the lowest priority.
*
* For each task, use the macro TASK_ALWAYS(n, r, d, s) for base tasks and
* TASK_NOTEST(n, r, d, s) for tasks that can be excluded in test binaries,
* where :
* 'n' is the name of the task
* 'r' is the main routine of the task
* 'd' is an opaque parameter passed to the routine at startup
* 's' is the stack size in bytes; must be a multiple of 8
*/
#define CONFIG_TASK_LIST \
TASK_ALWAYS(HOOKS, hook_task, NULL, TASK_STACK_SIZE) \
TASK_NOTEST(VBOOTHASH, vboot_hash_task, NULL, LARGER_TASK_STACK_SIZE) \
TASK_ALWAYS(CHARGER, charger_task, NULL, TASK_STACK_SIZE) \
TASK_NOTEST(THERMAL, thermal_task, NULL, TASK_STACK_SIZE) \
TASK_NOTEST(CHIPSET, chipset_task, NULL, TASK_STACK_SIZE) \
TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
TASK_ALWAYS(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
TASK_ALWAYS(CONSOLE, console_task, NULL, LARGER_TASK_STACK_SIZE) \
TASK_ALWAYS(POWERBTN, power_button_task, NULL, TASK_STACK_SIZE) \
TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE)

8
chip/lm4/openocd/lm4x_cmds.tcl
View File

@@ -35,7 +35,7 @@ proc flash_slippy { } {
flash_lm4 ../../../build/slippy/ec.bin 0
}
# Bolt/slippy/falco/peppy/wolf have 128KB images
# Bolt/slippy/falco/peppy have 128KB images
proc flash_bolt { } {
flash_lm4 ../../../build/bolt/ec.bin 0
}
@@ -60,10 +60,6 @@ proc flash_peppy { } {
flash_lm4 ../../../build/peppy/ec.bin 0
}
proc flash_wolf { } {
flash_lm4 ../../../build/wolf/ec.bin 0
}
# link has pstate in last sector
proc unprotect_link { } {
reset halt
@@ -71,7 +67,7 @@ proc unprotect_link { } {
reset
}
# Slippy/peppy/falco/wolf have pstate following RO
# Slippy/peppy/falco have pstate following RO
proc unprotect_slippy { } {
reset halt
flash erase_sector 0 126 127

1
common/build.mk
View File

@@ -18,7 +18,6 @@ common-$(BOARD_peppy)+=battery_peppy.o led_common.o led_peppy.o
common-$(BOARD_slippy)+=battery_slippy.o led_slippy.o
common-$(BOARD_snow)+=extpower_snow.o
common-$(BOARD_spring)+=battery_spring.o
common-$(BOARD_wolf)+=battery_wolf.o led_slippy.o
common-$(CONFIG_BACKLIGHT_X86)+=backlight_x86.o
common-$(CONFIG_BATTERY_BQ20Z453)+=battery_bq20z453.o

1
test/build.mk
View File

@@ -25,7 +25,6 @@ test-list-$(BOARD_link)=
test-list-$(BOARD_slippy)=
test-list-$(BOARD_falco)=
test-list-$(BOARD_peppy)=
test-list-$(BOARD_wolf)=
test-list-$(BOARD_bolt)=
# Emulator tests

2
util/flash_ec
View File

@@ -224,7 +224,7 @@ save="$(servo_save)"
case "${BOARD}" in
puppy | daisy | snow | spring | pit ) flash_daisy ;;
link ) flash_link ;;
slippy | falco | peppy | wolf ) flash_slippy ;;
slippy | falco | peppy ) flash_slippy ;;
*) die "board ${BOARD} not supported" ;;
esac