scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-27 18:25:05 +00:00
Code Issues Packages Projects Releases Wiki Activity

stm32f0: i2c: Set timing register values by port clock source

Browse Source 
I2C1 may be clocked by HSI or SCLK. I2C2 is always clocked by PCLK.
Therefore, apply different timing register values according to the
selected clock source for a port.

BUG=chrome-os-partner:46188
BRANCH=None
TEST=Manual on glados_pd. Verify slave i2c communication is functional.

Change-Id: Icd2306d25d5863b0fc3379e46885a227efb23cca
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/309781
Commit-Ready: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
This commit is contained in:
Shawn Nematbakhsh
2015-10-29 10:47:21 -07:00
committed by chrome-bot
parent e4d78afafb
commit 813e56e10a
2 changed files with 57 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

76
chip/stm32/i2c-stm32f0.c
View File

@@ -81,42 +81,39 @@ static int wait_isr(int port, int mask)
return EC_ERROR_TIMEOUT;
}
#if defined(CONFIG_HOSTCMD_I2C_SLAVE_ADDR) && \
defined(CONFIG_LOW_POWER_IDLE) && \
(I2C_PORT_EC == STM32_I2C1_PORT)
/* 8MHz i2cclk register settings */
#define STM32_I2C_TIMINGR_1000MHZ 0x00100306
#define STM32_I2C_TIMINGR_400MHZ 0x00310309
#define STM32_I2C_TIMINGR_100MHZ 0x10420f13
#else
/* 48MHz i2cclk register settings */
#define STM32_I2C_TIMINGR_1000MHZ 0x50100103
#define STM32_I2C_TIMINGR_400MHZ 0x50330309
#define STM32_I2C_TIMINGR_100MHZ 0xB0421214
#endif
/* Supported i2c input clocks */
enum stm32_i2c_clk_src {
I2C_CLK_SRC_48MHZ = 0,
I2C_CLK_SRC_8MHZ = 1,
I2C_CLK_SRC_COUNT,
};
static void i2c_set_freq_port(const struct i2c_port_t *p)
/* timingr register values for supported input clks / i2c clk rates */
static const uint32_t timingr_regs[I2C_CLK_SRC_COUNT][I2C_FREQ_COUNT] = {
[I2C_CLK_SRC_48MHZ] = {
[I2C_FREQ_1000KHZ] = 0x00100306,
[I2C_FREQ_400KHZ] = 0x00310309,
[I2C_FREQ_100KHZ] = 0x10420f13,
},
[I2C_CLK_SRC_8MHZ] = {
[I2C_FREQ_1000KHZ] = 0x50100103,
[I2C_FREQ_400KHZ] = 0x50330309,
[I2C_FREQ_100KHZ] = 0xB0421214,
},
};
static void i2c_set_freq_port(const struct i2c_port_t *p,
enum stm32_i2c_clk_src src,
enum i2c_freq freq)
{
int port = p->port;
const uint32_t *regs = timingr_regs[src];
/* Disable port */
STM32_I2C_CR1(port) = 0;
STM32_I2C_CR2(port) = 0;
/* Set clock frequency */
switch (p->kbps) {
case 1000:
STM32_I2C_TIMINGR(port) = STM32_I2C_TIMINGR_1000MHZ;
break;
case 400:
STM32_I2C_TIMINGR(port) = STM32_I2C_TIMINGR_400MHZ;
break;
case 100:
STM32_I2C_TIMINGR(port) = STM32_I2C_TIMINGR_100MHZ;
break;
default: /* unknown speed, defaults to 100kBps */
CPRINTS("I2C bad speed %d kBps", p->kbps);
STM32_I2C_TIMINGR(port) = STM32_I2C_TIMINGR_100MHZ;
}
STM32_I2C_TIMINGR(port) = regs[freq];
/* Enable port */
STM32_I2C_CR1(port) = STM32_I2C_CR1_PE;
}
@@ -129,12 +126,14 @@ static void i2c_set_freq_port(const struct i2c_port_t *p)
static void i2c_init_port(const struct i2c_port_t *p)
{
int port = p->port;
enum stm32_i2c_clk_src src = I2C_CLK_SRC_48MHZ;
enum i2c_freq freq;
/* Enable clocks to I2C modules if necessary */
if (!(STM32_RCC_APB1ENR & (1 << (21 + port))))
STM32_RCC_APB1ENR |= 1 << (21 + port);
if (port == 0) {
if (port == STM32_I2C1_PORT) {
#if defined(CONFIG_HOSTCMD_I2C_SLAVE_ADDR) && \
defined(CONFIG_LOW_POWER_IDLE) && \
(I2C_PORT_EC == STM32_I2C1_PORT)
@@ -144,6 +143,7 @@ defined(CONFIG_LOW_POWER_IDLE) && \
* upon exit from STOP mode.
*/
STM32_RCC_CFGR3 &= ~0x10;
src = I2C_CLK_SRC_8MHZ;
#else
/* Use SYSCLK for i2c clock. */
STM32_RCC_CFGR3 |= 0x10;
@@ -153,8 +153,24 @@ defined(CONFIG_LOW_POWER_IDLE) && \
/* Configure GPIOs */
gpio_config_module(MODULE_I2C, 1);
/* Set clock frequency */
switch (p->kbps) {
case 1000:
freq = I2C_FREQ_1000KHZ;
break;
case 400:
freq = I2C_FREQ_400KHZ;
break;
case 100:
freq = I2C_FREQ_100KHZ;
break;
default: /* unknown speed, defaults to 100kBps */
CPRINTS("I2C bad speed %d kBps", p->kbps);
freq = I2C_FREQ_100KHZ;
}
/* Set up initial bus frequencies */
i2c_set_freq_port(p);
i2c_set_freq_port(p, src, freq);
/* Set up default timeout */
i2c_set_timeout(port, 0);

11
include/i2c.h
View File

@@ -13,6 +13,17 @@
/* Flags for slave address field, in addition to the 8-bit address */
#define I2C_FLAG_BIG_ENDIAN 0x100 /* 16 byte values are MSB-first */
/*
* Supported I2C CLK frequencies.
* TODO(crbug.com/549286): Use this enum in i2c_port_t.
*/
enum i2c_freq {
I2C_FREQ_1000KHZ = 0,
I2C_FREQ_400KHZ = 1,
I2C_FREQ_100KHZ = 2,
I2C_FREQ_COUNT,
};
/* Data structure to define I2C port configuration. */
struct i2c_port_t {
const char *name; /* Port name */