scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-30 02:20:48 +00:00
Code Issues Packages Projects Releases Wiki Activity

elm: Set internal pull-high to GPI pins below.

Browse Source 
PE1 (BC12_ANX7688_INT_L)
     PE7 (ANX7688_CABLE_DET_EC_L)

Cost down 2 resistors.

BUG=none
BRANCH=none
TEST=Measure this two pins and verify voltage with digital meter.

Change-Id: Ic4456d372171933b4ac45942dba9a28c5bd80d3d
Reviewed-on: https://chromium-review.googlesource.com/345746
Commit-Ready: Tony Lin <tonycwlin@google.com>
Tested-by: Tony Lin <tonycwlin@google.com>
Reviewed-by: Rong Chang <rongchang@chromium.org>
This commit is contained in:
tonycwlin
2016-05-19 14:30:57 +08:00
committed by chrome-bot
parent 35d534dfb3
commit 828d5c19f6
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
board/elm/gpio.inc
View File

@@ -13,7 +13,7 @@ GPIO_INT(LID_OPEN, PIN(C, 13), GPIO_INT_BOTH, lid_interrupt) /
GPIO_INT(SUSPEND_L, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) /* AP suspend/resume state */
GPIO_INT(SOC_POWER_GOOD, PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(PD_MCU_INT, PIN(E, 0), GPIO_INT_RISING, pd_mcu_interrupt) /* Signal from PD MCU, external pull-up */
GPIO_INT(BC12_CABLE_INT, PIN(E, 1), GPIO_INT_FALLING, usb_evt) /* interrupt from BC12 and CABLE_DET */
GPIO_INT(BC12_CABLE_INT, PIN(E, 1), GPIO_INT_FALLING | GPIO_PULL_UP, usb_evt) /* interrupt from BC12 and CABLE_DET */
GPIO_INT(POWER_BUTTON_L, PIN(B, 5), GPIO_INT_BOTH | GPIO_PULL_UP, power_button_interrupt)
GPIO_INT(SPI1_NSS, PIN(A, 4), GPIO_INT_BOTH | GPIO_PULL_UP, spi_event) /* SPI Chip Select */
@@ -47,9 +47,9 @@ GPIO(KB_OUT12, PIN(D, 5), GPIO_KB_OUTPUT)
/* Inputs without interrupt handlers */
GPIO(5V_POWER_GOOD, PIN(A, 1), GPIO_INPUT)
GPIO(EC_WAKE, PIN(A, 0), GPIO_INPUT|GPIO_PULL_DOWN)
GPIO(EC_WAKE, PIN(A, 0), GPIO_INPUT | GPIO_PULL_DOWN)
GPIO(WP_L, PIN(B, 4), GPIO_INPUT) /* Write protect input */
GPIO(BAT_PRESENT_L, PIN(E, 3), GPIO_INPUT|GPIO_PULL_UP)
GPIO(BAT_PRESENT_L, PIN(E, 3), GPIO_INPUT | GPIO_PULL_UP)
GPIO(USB_C0_VBUS_WAKE_L, PIN(D, 12), GPIO_INPUT)
GPIO(EC_INT_L, PIN(B, 9), GPIO_ODR_HIGH)
@@ -70,7 +70,7 @@ GPIO(ENTERING_RW, PIN(F, 0), GPIO_OUT_LOW)
GPIO(AP_RESET_L, PIN(C, 3), GPIO_ODR_HIGH) /* Connect to the PMU_SYSRSTB */
GPIO(BC12_WAKE_L, PIN(D, 7), GPIO_INPUT)
GPIO(USB_C0_CABLE_DET_L,PIN(E, 7), GPIO_INPUT)
GPIO(USB_C0_CABLE_DET_L,PIN(E, 7), GPIO_INPUT | GPIO_PULL_UP)
GPIO(SYSTEM_POWER_H, PIN(B, 10), GPIO_OUT_LOW)
GPIO(PMIC_PWRON_H, PIN(A, 12), GPIO_OUT_LOW)