BBU flashing scripts

octal/bbu_flash/teraterm.py

@@ -0,0 +1,61 @@
+#!/usr/bin/python
+
+import sys
+import serial
+import serial.tools.list_ports
+import time
+
+all = serial.tools.list_ports.comports()
+port = None
+for i in all:
+  if 'ttyUSB0' in i[0]:
+    port = i[0]
+
+if port is None:
+  print('Device not found\n')
+  sys.exit
+else:
+  print(port)
+
+# configure the serial connections
+ser = serial.Serial(
+    port,
+    baudrate=115200,
+    bytesize=serial.EIGHTBITS,
+    parity=serial.PARITY_NONE,
+    stopbits=serial.STOPBITS_ONE,
+    xonxoff=False
+)
+
+if not ser.isOpen:
+  print('Failed to open port\n');
+  sys.exit
+
+data = []
+data.append('setenv ethaddr AA-BB-CC-DD-EE-FF')
+data.append('setenv ipaddr 10.102.81.61')
+data.append('setenv netmask 255.255.255.0')
+data.append('setenv serverip 10.102.81.50')
+data.append('setenv bootby tftp')
+data.append('setenv cfgloadby tftp')
+data.append('setenv swloadby tftp')
+data.append('setenv i2cinit \"i2c dev 0; i2c probe; i2c dev 1; i2c probe\"')
+data.append('setenv enable_eth \"i2c dev 1;i2c mw 0x21 7.1 0x7f\"')
+data.append('setenv bootcmd \"run i2cinit; run enable_eth; run namedalloc; run bootcby${bootby}\"')
+data.append('setenv bootcbytftp \"tftp 0x21000000 lsm_os.gz; gunzip 0x21000000 0x20000000 0x1000000; tftp 0x30800000 lsm_rd.gz; bootoctlinux 0x20000000 coremask=0x7 endbootargs rd_name=initrd mem=512M;\"')
+data.append('setenv namedalloc \"namedalloc dsp-dump 0x400000 0x7f4D0000; namedalloc cazac 0x630000 0x7f8D0000; namedalloc cpu-dsp-if 0x100000 0x7ff00000; namedalloc dsp-log-buf 0x4000000 0x80000000; namedalloc initrd 0x2800000 0x30800000;\"')
+data.append('setenv mk_ubootenv 1')
+data.append('saveenv')
+
+for i in range(len(data)):
+  ser.write(data[i] + '\r\n')
+  out = ''
+  time.sleep(1)   # 1 second delay between messages
+  while ser.inWaiting() > 0:
+    out += ser.read(1)
+
+  if out != '' :
+    print ">>" + out
+
+ser.close()
+

octal/bbu_flash/tn.py

@@ -0,0 +1,46 @@
+#!/usr/bin/python
+
+import telnetlib
+import subprocess
+import os
+import time
+
+tStart = time.time()
+
+tn = telnetlib.Telnet("192.168.53.72")
+print tn.read_until('terminate the Telnet session')
+
+tn.write('info' + b'\r\n')
+print tn.read_until('0xDEADBEEF', 2)
+
+tn.write('reset halt' + b'\r\n')
+print tn.read_until('processing target startup passed')
+
+tn.write('info' + b'\r\n')
+print tn.read_until('0xDEADBEEF', 3)
+
+tn.write('load 0x400000 bdk-minimal.bin BIN' + b'\r\n')
+print tn.read_until('Loading program file passed')
+
+tn.write('go 0x400000' + b'\r\n')
+tn.write('info' + b'\r\n')
+print tn.read_until('0xDEADBEEF', 3)
+
+tn.close()
+
+cwd = os.getcwd()
+os.chdir("~/octeon-bdk-2012.12/bin")
+output = subprocess.call(["bdk-remote", "flash", "write", "u-boot.bin", "0"])
+print output
+time.sleep(3)  # can't write without wait
+output = subprocess.call(["bdk-remote", "flash", "write", "u-boot.bin", "0xc0000"])
+print output
+os.chdir(cwd)
+
+tEnd = time.time()
+
+print 'Time elapsed %f sec' % (tEnd - tStart)
+print 'Unplug BDI'
+print 'Cycle power on BBU'
+print 'Run teraterm.py'
+