strago: Added power/battery LED support.

BUG=None
TEST=Verified LED changes color according to AC and battery status.
BRANCH=none

Change-Id: I83cc8255da385e38f08ee13b1eab90ee494b792d
Signed-off-by: li feng <li1.feng@intel.com>
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/265543
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>

board/strago/board.c

@@ -18,6 +18,8 @@
 #include "motion_sense.h"
 #include "power.h"
 #include "power_button.h"
+#include "pwm.h"
+#include "pwm_chip.h"
 #include "registers.h"
 #include "temp_sensor.h"
 #include "temp_sensor_chip.h"
@@ -30,6 +32,15 @@
 
 #include "gpio_list.h"
 
+/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
+const struct pwm_t pwm_channels[] = {
+	{0, PWM_CONFIG_ACTIVE_LOW},
+	{1, PWM_CONFIG_ACTIVE_LOW},
+	{3, PWM_CONFIG_ACTIVE_LOW},
+};
+
+BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
+
 /* power signal list.  Must match order of enum power_signal. */
 const struct power_signal_info power_signal_list[] = {
 	{GPIO_ALL_SYS_PGOOD,     1, "ALL_SYS_PWRGD"},

board/strago/board.h

@@ -44,6 +44,9 @@
 #define CONFIG_CHARGER_INPUT_CURRENT 2240
 #define CONFIG_CHARGER_DISCHARGE_ON_AC
 
+#define CONFIG_PWM
+#define CONFIG_LED_COMMON
+
 #define CONFIG_I2C
 
 /* I2C ports */
@@ -68,7 +71,6 @@
 #undef CONFIG_EOPTION
 #undef CONFIG_PSTORE
 #undef CONFIG_PECI
-#undef CONFIG_PWM
 #undef CONFIG_FANS
 #undef CONFIG_ADC
 #undef CONFIG_WAKE_PIN
@@ -87,6 +89,14 @@ enum power_signal {
 	POWER_SIGNAL_COUNT
 };
 
+enum pwm_channel {
+	PWM_CH_LED_RED,
+	PWM_CH_LED_BLUE,
+	PWM_CH_LED_GREEN,
+	/* Number of PWM channels */
+	PWM_CH_COUNT
+};
+
 enum temp_sensor_id {
 	/* TMP432 local and remote sensors */
 	TEMP_SENSOR_I2C_TMP432_LOCAL,

board/strago/build.mk

@@ -10,5 +10,5 @@
 CHIP:=mec1322
 CHIP_SPI_SIZE_KB:=512
 
-board-y=board.o
+board-y=board.o led.o
 board-$(CONFIG_BATTERY_SMART)+=battery.o

board/strago/led.c

@@ -0,0 +1,203 @@
+/* Copyright 2015 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Power/Battery LED control for Strago
+ */
+
+#include "charge_state.h"
+#include "chipset.h"
+#include "console.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "led_common.h"
+#include "pwm.h"
+#include "registers.h"
+#include "util.h"
+
+#define CPRINTF(format, args...) cprintf(CC_PWM, format, ## args)
+#define CPRINTS(format, args...) cprints(CC_PWM, format, ## args)
+
+#define LED_TOTAL_TICKS 16
+#define LED_ON_TICKS 4
+
+static int led_debug;
+
+const enum ec_led_id supported_led_ids[] = {
+	EC_LED_ID_POWER_LED, EC_LED_ID_BATTERY_LED};
+const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
+
+enum led_color {
+	LED_OFF = 0,
+	LED_RED,
+	LED_AMBER,
+	LED_GREEN,
+
+	/* Number of colors, not a color itself */
+	LED_COLOR_COUNT
+};
+
+/* Brightness vs. color, in the order of off, red, amber, and green */
+static const uint8_t color_brightness[LED_COLOR_COUNT][3] = {
+	/* {Red, Blue, Green}, */
+	[LED_OFF]   = {  0,   0,   0},
+	[LED_RED]   = {100,   0,   0},
+	[LED_AMBER] = { 75,   0,  10},
+	[LED_GREEN] = {  0,   0, 100},
+};
+
+/**
+ * Set LED color
+ *
+ * @param color		Enumerated color value
+ */
+static void set_color(enum led_color color)
+{
+	pwm_set_duty(PWM_CH_LED_RED, color_brightness[color][0]);
+	pwm_set_duty(PWM_CH_LED_BLUE, color_brightness[color][1]);
+	pwm_set_duty(PWM_CH_LED_GREEN, color_brightness[color][2]);
+}
+
+void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
+{
+	brightness_range[EC_LED_COLOR_RED] = 100;
+	brightness_range[EC_LED_COLOR_BLUE] = 100;
+	brightness_range[EC_LED_COLOR_GREEN] = 100;
+}
+
+int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
+{
+	pwm_set_duty(PWM_CH_LED_RED, brightness[EC_LED_COLOR_RED]);
+	pwm_set_duty(PWM_CH_LED_BLUE, brightness[EC_LED_COLOR_BLUE]);
+	pwm_set_duty(PWM_CH_LED_GREEN, brightness[EC_LED_COLOR_GREEN]);
+	return EC_SUCCESS;
+}
+
+static void strago_led_set_power(void)
+{
+	static int power_ticks;
+	static int previous_state_suspend;
+
+	power_ticks++;
+
+	if (chipset_in_state(CHIPSET_STATE_SUSPEND)) {
+		/* Reset ticks if entering suspend so LED turns amber
+		 * as soon as possible. */
+		if (!previous_state_suspend)
+			power_ticks = 0;
+
+		/* Blink once every four seconds. */
+		set_color(
+			(power_ticks % LED_TOTAL_TICKS) < LED_ON_TICKS ?
+			LED_AMBER : LED_OFF);
+
+		previous_state_suspend = 1;
+		return;
+	}
+
+	previous_state_suspend = 0;
+
+	if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
+		set_color(LED_OFF);
+	else if (chipset_in_state(CHIPSET_STATE_ON))
+		set_color(LED_GREEN);
+}
+
+static void strago_led_set_battery(void)
+{
+	static int battery_ticks;
+
+	battery_ticks++;
+
+	switch (charge_get_state()) {
+	case PWR_STATE_CHARGE:
+		set_color(LED_AMBER);
+		break;
+	case PWR_STATE_ERROR:
+		set_color(LED_RED);
+		break;
+	case PWR_STATE_CHARGE_NEAR_FULL:
+	case PWR_STATE_IDLE: /* External power connected in IDLE. */
+		set_color(LED_GREEN);
+		break;
+	default:
+		/* Other states don't alter LED behavior */
+		break;
+	}
+}
+
+static void led_init(void)
+{
+	/* Configure GPIOs */
+	gpio_config_module(MODULE_PWM_LED, 1);
+
+	/*
+	 * Enable PWMs and set to 0% duty cycle.  If they're disabled,
+	 * seems to ground the pins instead of letting them float.
+	 */
+	pwm_enable(PWM_CH_LED_RED, 1);
+	pwm_enable(PWM_CH_LED_GREEN, 1);
+	pwm_enable(PWM_CH_LED_BLUE, 1);
+
+	set_color(LED_OFF);
+}
+DECLARE_HOOK(HOOK_INIT, led_init, HOOK_PRIO_DEFAULT);
+
+/**
+ * Called by hook task every 250 ms
+ */
+static void led_tick(void)
+{
+	if (led_debug)
+		return;
+
+	if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED))
+		strago_led_set_power();
+
+	if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED))
+		strago_led_set_battery();
+}
+DECLARE_HOOK(HOOK_TICK, led_tick, HOOK_PRIO_DEFAULT);
+
+static void dump_pwm_channels(void)
+{
+	int ch;
+	for (ch = 0; ch < 4; ch++) {
+		CPRINTF("channel = %d\n", ch);
+		CPRINTF("0x%04X 0x%04X 0x%04X\n",
+			MEC1322_PWM_CFG(ch),
+			MEC1322_PWM_ON(ch),
+			MEC1322_PWM_OFF(ch));
+	}
+}
+/******************************************************************/
+/* Console commands */
+static int command_led_color(int argc, char **argv)
+{
+	if (argc > 1) {
+		if (!strcasecmp(argv[1], "debug")) {
+			led_debug ^= 1;
+			CPRINTF("led_debug = %d\n", led_debug);
+		} else if (!strcasecmp(argv[1], "off")) {
+			set_color(LED_OFF);
+		} else if (!strcasecmp(argv[1], "red")) {
+			set_color(LED_RED);
+		} else if (!strcasecmp(argv[1], "green")) {
+			set_color(LED_GREEN);
+		} else if (!strcasecmp(argv[1], "amber")) {
+			set_color(LED_AMBER);
+		} else {
+			/* maybe handle board_discharge_on_ac() too? */
+			return EC_ERROR_PARAM1;
+		}
+	}
+
+	if (led_debug == 1)
+		dump_pwm_channels();
+	return EC_SUCCESS;
+}
+DECLARE_CONSOLE_COMMAND(ledcolor, command_led_color,
+			"[debug|red|green|amber|off]",
+			"Change LED color",
+			NULL);
+