When CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT is defined for a board, as
its name implies, the board can source a higher current if there is
only one port acting as a source.
This commit fixes an issue with selecting the right source capability
message to advertise. charge_manager_get_source_pdo() was simply
checking if there was more than one sink connected, instead of checking
if there were any *other* sinks connected. In the event that a sink
was connected to a different port, we would advertise the max source
PDO.
BUG=b:64037926, b:35577509
BRANCH=gru,eve,reef
TEST=Connect sink to port 1. Connect a AMA to port 0 that claims that
VBUS isn't necessary. Start sending source caps, verify that the max
PDO is not being advertised in the source caps.
Change-Id: Ie4145ecaf98d5b9070ad3e8b139e5653685fa801
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/610479
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Store our image size (known at build time) in our version struct (now
renamed to image_data). This will allow us to more efficiently determine
the size of an image in a follow-up CL.
Note that compatibility is broken for old ROs that do not include this
CL.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that stored image size matches
output of system_get_image_used() for both RO and RW images.
BRANCH=None
Change-Id: I7b8dc3ac8cf2df3184d0701a0e0ec8032de8d81b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/450858
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
pdcontrol suspend command will be used to prevent tcpm from putting
the chip into sleep while firmware update is taking place. Currently
the command suspends or resumes port 0. This patch makes the command
apply to ports individually.
pd enable console command now takes a port number:
pd <port> enable/disable.
This patch also replaces CONFIG_USB_PD_COMM_ENABLED with _DISABLED.
When it's defined, PD communication is disabled at startup.
Plankton undefines CONFIG_USB_PD_COMM_ENABLED enable, intending to
disable PD communication at startup. Therefore, this patch defines
CONFIG_USB_PD_COMM_DISABLED in its board.h.
BUG=b:35586859
BRANCH=none
TEST=From AP console:
localhost # /tmp/ectool pdcontrol suspend 1
[600.188013 TCPC p1 suspended!]
> pd 1 state
Port C1 CC1, Dis - Role: SNK-UFP State: SUSPENDED, Flags: 0x0020
localhost # /tmp/ectool pdcontrol resume 1
[678.516613 TCPC p1 resumed!]
> pd 1 state
Port C1 CC1, Ena - Role: SNK-UFP State: DRP_AUTO_TOGGLE, Flags: 0x0020
From ec console:
> pd 1 disable
Port C1 disable
> pd 1 state
Port C1 CC1, Dis - Role: SNK-UFP State: DRP_AUTO_TOGGLE, Flags: 0x0020
> pd 1 enable
Port C1 enabled
> pd 1 state
Port C1 CC1, Ena - Role: SNK-UFP State: DRP_AUTO_TOGGLE, Flags: 0x0020
Change-Id: Ia0cc4904ac52adc4b89de20918968c8df78b9c80
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/447968
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Store our image size (known at build time) in our version struct (now
renamed to image_data). This will allow us to more efficiently determine
the size of an image in a follow-up CL.
Note that compatibility is broken for old ROs that do not include this
CL.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that stored image size matches
output of system_get_image_used() for both RO and RW images.
BRANCH=None
Change-Id: I49ea5fc27a7f11f66daba485a87d0dfe7d0c770f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/427408
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Servo_v4 requires the ability to have a different default state per
port. In previous devices, the assumption was that each supported port
had the same default usb pd state and power role. This CL moves the
by the default power role which in turn is derived from
CONFIG_USB_PD_DUAL_ROLE. In addiiton to moving the location, it now
uses 'port' as argument so it can be port specific if required.
PD_DEFAULT_STATE was a board.h specific config, but in practice each
instance used to date was set to PD_STATE_SNK_DISCONNECTED if
CONFIG_USB_PD_DUAL_ROLE was defined and set to
PD_STATE_SRC_DISCONNECTED otherwise.
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual run 'make -j buildall' to verify that all instances of
PD_DEFAULT_STATE were removed.
Change-Id: Iaf40718668732f525485ed7942ee7fc246d3f75d
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431787
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When the board is using dynamic source PDOs, we need to ensure that we
are checking the incoming sink power request against the right set of
PDOs else we might reject a valid request (e.g. with high-power source,
we need to check against the 3.0A limit if we only have one port
connected).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=gru
BUG=chrome-os-partner:56110
TEST=Connect Kevin to Caroline, ask Caroline to charge from the other
side and see it negotiating successfully a 5V/3A contract.
Change-Id: Ie1aa5746776be5946422bf07c08ae0f22faddd8c
Reviewed-on: https://chromium-review.googlesource.com/403088
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add a policy to handle the case where the device can source the
`CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT` over one of its type-C port if
there is no sink connected on the other ones.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:56110
TEST=manual: on Kevin, plug and unplug various devices on the 2 ports,
while measuring the type-C pull-up with Twinkie.
Change-Id: Id5961f04d0a1b1073f5ab340068efd9079918209
Reviewed-on: https://chromium-review.googlesource.com/373818
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This feature is inconsistent. Not all boards have such a symlink
(for a obvious reason).
This feature is fragile. It's most likely not tested and going to be
broken if not already. Developers won't like it if they have to test
two different ways to build boards before submitting patches.
This feature is not necessary. If you build EC in the standard way
(e.g. make BOARD=samus), these symlinks are not needed.
This feature is wasteful. Extra disk spaces are used and extra lines
are added to Makefile (increasing code complexity slightly).
BUG=chromium:626776
BRANCH=none
TEST=make buildall
Change-Id: Id5444284d773cb0e9225f39abd877441b8f61440
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359321
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously CONFIG_USB_PD_TCPM_VBUS had two uses which were independent:
- When operating as a TCPC, it indicated that the VBUS level should be
tracked (through GPIO inputs) and sent to the external TCPM when
appropriate.
- When operating as a TCPM, it indicated that the VBUS level should be
obtained by querying the TCPC.
These two independent uses have been split into
CONFIG_USB_PD_TCPC_TRACK_VBUS and CONFIG_USB_PD_VBUS_DETECT_TCPC, which
sould be more clear.
In addition, CONFIG_USB_PD_VBUS_DETECT_* CONFIGs have been added for
other means of VBUS detection.
BUG=chromium:616580
BRANCH=None
TEST=Verify kevin continues to boot + charge.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I936821481d6577e17e3e9c61ff97c037574d6923
Reviewed-on: https://chromium-review.googlesource.com/348950
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The EC code expects console commands to be no longer than 14
characters, otherwise the alignment of the help command output breaks.
This patch replaces flash_spi_sel_lock with flash_spi_lock and
fake_disconnect with fakedisconnect to make sure the command names
fit.
BRANCH=none
BUG=none
TEST=the 'help' command output is not misaligned any more
Change-Id: Ia65f1535850a07adccbef0812c8a0922c0264cea
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/345570
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>
Previously the maximum number of deferred routines was specified by the
the default maximum number of deferred routines you had to override
this, and if you wanted fewer, you still payed the price of having the
defer_until array statically allocated to be the maximum size.
This change removes that define and instead creates the RAM state of
the deferred routine (the time to wait until to call the deferred) when
the deferred is declared.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
manually test on discovery-stm32f072
Change-Id: Id3db84ee1795226b7818c57f68c1f637567831dc
Reviewed-on: https://chromium-review.googlesource.com/335597
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The scheme to disable PD communication in locked RO needs to be
implemented on other platforms, so move it to common code, behind
CONFIG_USB_PD_COMM_LOCKED.
BUG=chrome-os-partner:52157
BRANCH=glados
TEST=Manual on chell. Lock system and boot to recovery, then verify PD
communication is functional. Enable CONFIG_USB_PD_COMM_LOCKED and verify
PD communication isn't functional under the same test conditions.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I8d1f24c0b60cf1c54e329af003b7083ee55ffc40
Reviewed-on: https://chromium-review.googlesource.com/338064
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
With commit e9883124ff, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Added a 'drp' option to the console command usbc_action that is
used to toggle dualrole mode operation on and off. The default
Plankton operation is not affected as this control is initialized
to be disabled. When dualrole mode is enabled, then both CC lines
are used and monitored.
BRANCH=none
BUG=chrome-os-partner:50074
TEST=Manual
Tested Plankton connected to Samus. Verified that when dualrole mode
is enabled that it can connect as both SRC and SNK. Tested with Type C
cable initially connected and disconnected. In addition, verified that
power role swaps behave correctly, and that when disabled, default
Plankton operation is resumed.
Change-Id: I60adfa25844a01a50ba45d5d92e17a3318f3e0a0
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/325545
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Convert some uses of gpio_set_flags_by_mask to plain gpio_set_flags.
The result is usually more readable due to being able to use the
GPIO_* enum names, and it removes more instances of port/mask
implementation details leaking outside the gpio.c chip specific code.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I06a7ad8a53e553a8e432a6abb5b38c25a98df6c6
Reviewed-on: https://chromium-review.googlesource.com/323815
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove duplicate code for checking request message, but keep
a board specific check of the request message for custom checks
needed on zinger and plankton.
BUG=chrome-os-partner:42490
BRANCH=none
TEST=make -j buildall. run on samus and connect a hoho, make
sure we successfully negotiate a contract.
Change-Id: I7398953a158d340e3e113f5a816b55445a857711
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/305374
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When enable CCD, we expect DP/USB super speed MUX is switched to USB and
reset RFU polarity MUX for USB2 to recognize correct devices.
BRANCH=none
BUG=chrome-os-partner:44977
TEST=manual
Connect plankton's type-c to a PD sink, switch plankton to power source
switch DP MUX to DP, and press CCD button.
Super speed MUX should be switch to USB3 mode. And if the PD sink
supports CCD, host computer should be able to recognize CCD devices.
Signed-off-by: Rong Chang <rongchang@chromium.org>
Change-Id: I61c80d9a41c368450a9c9f33a20d99eef83a437d
Reviewed-on: https://chromium-review.googlesource.com/303285
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Set USB communications capable flag in source/sink
capabilities PDO on boards that support USB. This
signals to other side that we are capable of
communication over D+/D- or SS Tx/Rx.
BUG=chrome-os-partner:34982
BRANCH=samus,smaug
TEST=load on samus, use twinkie to sniff traffic,
verify that USB comms capable bit is set in source
cap packet
Change-Id: I0f49cf19eb141512298c3439a4708c53101d674f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300637
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Create new custom VDM to notify DUT to enter case closed
debugging mode. Send this VDM from Plankton when the case
closed debugging enable button is pressed. Once DUT
receives the CCD enable VDM, CCD remains enabled until
a reboot. Note, this is polarity dependent, so cable
might need to be flipped.
BUG=chrome-os-partner:42569
BRANCH=smaug
TEST=load on plankton and ryu. attach full feature C to C
cable (must have USB3.0 wires). make sure plankton is in
USB mode (USB_SS_USB_MODE light should be set, which can be
done by pressing DP_USB_TOGGLE button). Press CASE_CLOSE_EN
button to send VDM, and then attach micro-B to debug port
CN14 on plankton. See that VID/PID for Ryu show up in lsusb
on host, and EC console works. If device does not show up,
flip polarity of cable.
Change-Id: Ifa469e4a43e32089becd75fe6cdfe0ed462d950b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/287441
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add ability for Plankton to detect whether a single or double
CC cable is used to connect to DUT. This is done by toggling
the active CC line until a connection is detected, then toggling
once more and checking if we still have a connection. If we
can connect to the DUT in both CC polarities, then it is a
double CC cable. Before we know the cable type, keep PD
communication disabled to avoid partially negotiating and then
disconnecting. Note, this increases the time it takes for
us to connect a form a stable PD contract with the DUT.
When we detect a double CC cable, the cable flip button actually
flips the active CC polarity, thus testing all pins in the
opposite polarity.
BUG=chrome-os-partner:42569
BRANCH=smaug
TEST=test with plankton and samus. test that we form a PD
contract with both single and double CC cables as both sink
and source. also test the cable flip button for both cables.
Change-Id: I522369302848d4cdbb70c55a40af3ad0b7c3fb8a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/286589
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Change refines HPD debounce values into both upstream and downstream
values for packetizing across the type-C link.
For LVL, the upstream type-C device will packetize any HPD transition
>=2ms as either HIGH or LOW. On the downstream side the value is
driven immediately. Additional debouncing should be done by true
upstream device according to specification.
For IRQ, the upstream type-C device will packetize any HPD pulse
>250usec as an IRQ. On the downstream side it will be de-packetized
to create 750usec pulse.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:39717
TEST=samus|macbook(2015) + hoho|dingdong|apple HDMI type-C dongles
still drive screens successfully.
Change-Id: Ide58f3b2d675a82c12ca6afc2be53ca6e2561ace
Reviewed-on: https://chromium-review.googlesource.com/273867
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Move parts of usb_pd_config.h that are not part of the phy layer
out of usb_pd_config.h and into board.h. This cleans up the
division between the TCPC and TCPM as only the TCPC needs to
use usb_pd_config.h.
Also cleans up the use of the CC detection voltage thresholds
by creating standard macros to use based on Rp strength for the
board.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I946cceb38bea8233095b8a4b287102bb8a3a296d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270337
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add config options for various parts of USB PD stack:
CONFIG_USB_POWER_DELIVERY: The use of this option has changed
slightly. It now represents whether or not to include the USB
PD protocol and policy layers of the software stack.
CONFIG_USB_PD_TCPC: Compile in type-C port controller module
which performs the phy layer of the PD stack.
CONFIG_USB_PD_TCPM_STUB and CONFIG_USB_PD_TCPM_TCPCI: If
CONFIG_USB_POWER_DELIVERY is defined, then one TCPM needs to
be defined to declare which port management module to use
to drive the TCPC.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I41aa65a478e36925745cd37a6707f242c0dfbf91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270171
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
If we are switching from DP mode to USB mode, reset the USB hub to make
sure the hub recognizes USB connection properly. Note that we only reset
the hub when making the switch by pressing the button on the board. This
is to prevent disrupting BFT test flow, during which we don't want to
reset the hub so as to maintain the USB link between the test host and
Plankton MCU.
BRANCH=None
BUG=chrome-os-partner:34296
TEST=Press the button to toggle between DP and USB mode. Measure USB hub
reset signal with a scope.
Change-Id: I69bdee292fe414abbe0a4778b8f5e8041e4534c1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237606
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
When a DP cable is attached, if we toggle the USB/DP mux to USB mode,
the DP data link is broken. In this case, we should send a HPD event to
notify the host. Similarily, when we switch back to DP mode when a cable
is attached, we should send a HPD attachment event and then a HPD IRQ to
notify the host that the DP link is ready.
BRANCH=None
BUG=chrome-os-partner:34296
TEST=Connect Plankton to Samus. Perform the following tests:
1. Attach a cable, and switch between USB and DP mode.
2. Attach a cable in DP mode, switch to USB mode, unplug the
cable, and then switch back to DP mode.
3. Similar to 2 but start without the cable.
Change-Id: I5db0c036ce45850b2f4ca142957f4a235673df6f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237604
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
HPD needs to be transported over USB PD as both SBU lines are consumed
for differential AUX signalling.
This CL does the following:
1. Enables GPIO DPSRC_HPD as interrupt.
2. Sends debounced HPD across CC via the SVDM DP status message.
3. Adds polling for GPIO_DBG_20V_TO_DUT_L as it shares the same
interrupt as DPSRC_HPD.
4. Configures DP redriver in presence of HPD high.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chrome-os-partner:33132,chrome-os-partner:33761
TEST=manual,
1. Connect samus -> plankton via type-C
2. Connect plankton -> DP monitor via displayport
See initial SVDM discovery on samus console
See EDID information
See SVDM status message correct when plug/unplug DP cable from plankton
3. Press 'CHARGING_20V_TO_DUT_L' button and see below on plankton console.
Button 8 = 0
Change-Id: Id95567a3bfa073ffa2c699335be8c5bf0327675f
Reviewed-on: https://chromium-review.googlesource.com/229429
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit, '0016de8 - plankton: Initialize re-driver', didn't account for
the state of the redriver at the time it was being initialized in
manual training mode. This led to inconsitencies of manual training
configuration.
This CL resets the SN75DP130 via software to guarantee configuration
regardless of cold versus warm boot.
Additionally I learned that manual training requires setting of both
the link_bw_set (5.4gbps) and lane_count_set (4) in order make the
back side of the redriver happy. This can ONLY be done however in the
presence of HPD high. Future CL will incorporate this DPCD init into
HDP interrupt handler as well.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chrome-os-partner:35153
TEST=manual,
samus + plankton successfully drives Samsung U28D590 from cold or warm
boot of either plankton or samus in both polarities. Note DisplayPort
cable must be connected to external monitor prior to power on or reset.
macbook (2015 type-C) + plankton also works.
Change-Id: I8b34341d10f64abfa55c18f70c842a4446f36fa8
Reviewed-on: https://chromium-review.googlesource.com/266526
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Host's single lane training algorithm in kernel (intel_dp_is_reversed)
appears to confuse the re-driver's auto training algorithm. If
however its manually configured the algorithm succeeds.
NOTE, this does present risk on the DPsrc (re-driver) to DPsink
(external monitor) side as voltage levels & pre-emphasis will NOT be
adjusted.
This may be acceptable in the short-term while determining if
additional functionality needs to be added on host side to account for
re-driver's presence
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chrome-os-partner:35153
TEST=manual, plankton drives 4K monitor in both polarities
Change-Id: I83ea80c44d36ad1afad56528c80ec5b8a138b5be
Reviewed-on: https://chromium-review.googlesource.com/263138
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Treat externally powered dualrole devices as dedicated chargers.
This allows us to default to consuming power from externally powered
dualrole devices and cancels a charger override when one is attached.
BUG=chrome-os-partner:38785
BRANCH=samus
TEST=tested with third-party dualrole device that can be externally
powered.
also tested with another samus that was hard-coded with externally
powered bit set, and deleted it's policy for power swapping. when
this externally-powered samus is plugged into a samus running this CL,
we always charge from the externally-powered samus.
Change-Id: I850eba668e86d311d9353aa3881fc3a518409630
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/263331
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Refactoring effort to unify the set of PD intialization tasks that
need to occur. Those areas include:
1. host mode as it relates to power & pull-ups/downs
2. PD tx init
3. PD mux settings
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:36481
TEST=manual,
1. compiles and functions on samus_pd
2. If sysjump w/ dongle connected than alternate mode re-entered
properly including muxing and HPD
Change-Id: I47f32acaeccbd7745e1e01a8b085b1804c4c5000
Reviewed-on: https://chromium-review.googlesource.com/249273
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
VCONN should be off at the start of pd task. This is handled
initially by the defaults in gpio.inc. However in the case of a
sysjump after a RW only firmware update the previous state would be
preserved.
This in turn would allow us to evaluate polarity incorrectly if an
accessory was connected in the CC2 polarity and subsequently enable
both VCONNs which would leave the port with both CCx lines at 3.3V.
This change adds a new function, pd_config_init, which initializes
VCONN(s) to off. Future CLs will evaluate other PD related GPIOs that
may be left unitialized as a result of sysjump.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:36481
TEST=manual,
1. Boot samus w/ samus_pd in RO
2. connect hoho | dingdong in CC2 polarity to type-C port
3. sysjump to RW
4. unplug / plug hoho | dingdongs
No longer see both VCONNs enabled.
Change-Id: Ia53c06ea8face4da6829f9667f4f44a9034183be
Reviewed-on: https://chromium-review.googlesource.com/248831
Trybot-Ready: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
This includes:
- Enabling SBU path for debug USB usage in USB mode (not in DP mode)
- Add a console command to enable DFU mode for lab devices. This
requires the additional Silego chip on the device.
BRANCH=None
BUG=None
TEST=Hook up a Ryu with the additional Silego chip. Issue 'dfu' command
and see DFU device in 'lsusb' output. Issue the command again and the
device goes away.
Change-Id: I3f942c6abe52784351f2242c9b0b6400e9b2b6fd
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/247350
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Separate macros for defining delays to turn on and off VBUS on the
Raiden ports.
Tune the delays for Samus to provide extra headroom based off of
measured worst case times.
BUG=chrome-os-partner:34525
BRANCH=samus
TEST=load onto samus. connect two samus' and use twinkie to analyze
time between request and PS_RDY on connect and then on a power swap.
Change-Id: I65cec911e34c22a4aad136423362a3a65bc2ab2a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241761
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Do not request a voltage that is within the deadband where we
aren't sure if the boost or the boost bypass is on.
BUG=chrome-os-partner:34938
BRANCH=samus
TEST=test on samus with zinger. change the deadband to [10V, 20V]
and see that we only negotiate to 5V. change the deadband to
[13V, 20V] and see that we negotiate to 12V. change the deadband
to [10V, 13V] and see that we negotiate to 20V.
Change-Id: Id761aef35eeadfa2ab7d2ca31a48d4324625ab32
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241528
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For samus, on PD connection or on resume to S0, if we are a sink,
and the other side supports PR_SWAP, then attempt a power swap.
This adds callback functions into board policy file to check
and issue power or data swaps if required by the product.
BUG=chrome-os-partner:31195
BRANCH=samus
TEST=connect samus to zinger and make sure zinger always ends up
as SRC-UFP.
connect samus to samus with both in S0 and see that
they swap power roles once and not data roles.
connect one samus in S0 to one samus in S5 and see that the one
in S5 is sink. then when you boot the one in S5 it switches to a
source.
connect samus to samus with both in S0. do chgoverride 1 on one
side to start charging from the other samus. then on the same
side, turn off the machine (S5) and resume (S0), and see that it
is still charging from the other samus (ie has not switched roles
to source).
Change-Id: Ifab2465fccef77448ac4771a3c2de1c867cbbec4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238302
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For factory testing, we need a way to simulate unplugging type-C cable.
To do so, we disable VBUS output and pull-up/pull-down on CC lines on
Plankton, so that the CC lines become floating.
BRANCH=None
BUG=chrome-os-partner:32163
TEST=Connect Plankton to Ryu. Try 'fake_disconnect' as SRC/SNK.
Change-Id: I73a7355e078b6aed4b7d281d480e0aedbc8c2db0
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229662
Reviewed-by: Pin-chih Lin <johnylin@chromium.org>
Tested-by: Pin-chih Lin <johnylin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove common code across all PD policy layers to select the requested
voltage and build a Request Data Object (RDO).
BUG=none
BRANCH=samus
TEST=Load onto samus and connect zinger. Make sure we request the right
voltage (first 5V, then after initial contract is made, 20V). Make
sure input current limit is set appropriately by checking limit on EC
console using charger command.
Change-Id: Ic6bda5e23b2d7b7d710ffdf085e7fbc1b0c3add9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233673
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Remove dualrole power capable flag from source/sink cap packets
so that samus/ryu default to drawing power from plankton.
BUG=none
BRANCH=samus
TEST=load on plankton. select 20V to DUT, attach samus or ryu
and see that it charges
Change-Id: I3d31b14f65ee8dfa4d817d47598c505b0f6d7479
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231342
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Ensure that the PD source changes the output voltage after
tSnkTransition delay after having sent the ACCEPT message
(rather than before).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33684
TEST=connect Zinger to a PD power sink and monitor VBUS and CC while
doing a 20V to 5V transition.
Change-Id: If86f59eec67630491f4e8dc13a52015ac2de918a
Reviewed-on: https://chromium-review.googlesource.com/230805
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
