This CL modified the flash_ec and openocd script to support flashing
npcx7m7x chip on npcx7_evb.
BRANCH=none
BUG=none
TEST=Change CHIP_VARIANT to npcx7m7w in board/npcx7_evb/build.mk;
"BOARD=npcx7_evb make"; Move npcx7_evb from array BOARDS_NPCX_7M6X_JTAG
to BOARDS_NPCX_7M7X_JTAG in util/flash_ec; Connect servo JTAG to npcx7
EVB; "./util/flash_ec --board=npcx7_evb"; Make sure the programing
succeed and EVB bootup.
Change-Id: I9d448f55321330cbe9a7103d2b617617963ea307
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/858989
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In the CL:826909, the name and the restore address of ec_spiflash lfw
are modified becaue of introducing the UUT. This CL modified the openocd
scripts to follow the changes of the lfw.
BRANCH=none
BUG=none
TEST=Apply CL:826906 and "BOARD=npcx7_evb make";
Run cmd "./util/flash_ec --board=npcx7_evb" to flash ec image;
Make sure the ec firmware can be updated with the new npcx_minotor lfw
+ this CL via JTAG on Servo v2.
Change-Id: If622f83e2d2132d66b390bcee30c77e7a9d5f7bd
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/828341
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
The original _CHIPNAME for npcx ec in the openocd configuration file
is npcx5m5g. As we introduce more npcx ec SKUs, it is not appropriate
to keep using this name. This CL modifies the _CHIPNAME to a generic
name(npcx_ec).
BRANCH=none
BUG=none
TEST=./util/flash_ec --board=npcx7_evb; check the openocd log and make
sure the _CHIPNAME is npcx_ec now.
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Change-Id: I49d298de1e43ac29f3e5535702595ee27225ac23
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/576604
Commit-Ready: Jun Lin <riverq@gmail.com>
Tested-by: Jun Lin <riverq@gmail.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Add the evaluation board driver of npcx7 series ec for testing. If you
received the evb which ec is 128-pins package, please notice it has
the following limitations.
a. No GPIOD7/E0 pins.
b. No I2C4_0, I2C4_1, I2C5_1 and I2C6_1 ports.
c. No ADC7, ADC8 and ADC9 channels.
d. No JTAG port 1.
e. Do not enable CONFIG_HIBERNATE_PSL since no PSL circuit on evb.
This CL also includes:
1. Modified reset config from srst to sysresetreq in openocd/npcx.cfg.
Make sure openocd driver can reset ec by using NVIC_SYSRESETREQ.
2. Add flash utilities for npcx7 ec in openocd/npcx_cmds.tcl.
3. Add npcx7_evb support in flash_ec.
BRANCH=none
BUG=none
TEST=Passed all npcx7 drivers verification on the evb no matter which
ec's package is 128 or 144 pins package.
Change-Id: I8224d97cd66ce483d70816f47b2e124308f1b69c
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/505832
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since npcx5m6g has larger than 128 KB code ram for FW, the original
alignment between RO & RW regions isn't suitable for new chip.
Therefore, we add 256KB alignment of them for npcx5m6g.
In order to program the flash used by npcx5m6g, we add new board array,
BOARDS_NPCX_5M6G_JTAG, in flash_ec to distinguish which flash layout
ec used. In npcx_cmds.tcl, add new script funcs such as flash_npcx5m5g
and flash_npcx5m6g to program flash with different layout.
Modified sources:
1. config_flash_layout.h: Add 256KB alignment of RO & RW regions for
npcx5m6g.
2. util/flash_ec: Add new board array, BOARDS_NPCX_5M6G_JTAG, to
distinguish which flash layout ec used.
3. openocd/npcx_cmds.tcl: Add new script funcs to program flash with
different layout.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I0ace31d96d6df2c423b66d508d30cefb0b82ed6c
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/331903
Reviewed-by: Shawn N <shawnn@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
All boards in ToT have the same RO configuration.
Boards which define CONFIG_FLASH_PSTATE_BANK have pstate following RO.
BRANCH=none
BUG=chrome-os-partner:22990
TEST="git grep" to see that none of the affected functions are called.
Change-Id: Ie1eb9a726e1fa157852b0c55d474c9b4587c41f0
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273908
Reviewed-by: Randall Spangler <rspangler@chromium.org>
rename setup_openocd -> flash_openocd
refactor so that flash_npcx and flash_lm4 set OCD_CMDS and call flash_openocd
BRANCH=none
BUG=chrome-os-partner:22990
TEST=run flash_ec before and after and compare the sequence of calls to
dut-control and the command-line args to openocd
tested with ryu (non-lm4), samus, link, npcx_evb, and peppy
Change-Id: I7a05e3219d4b324bcf19a20f86b149f8e3377465
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273907
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Avoid duplicating servo configurations for every chip.
BRANCH=none
BUG=chrome-os-partner:22990
TEST=None. This is an intermediate step to make it clear what's happening.
CQ-DEPEND=CL:273950
Change-Id: I448543b6ab9d39423955e8d2589b6035c59e838a
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273906
Reviewed-by: Randall Spangler <rspangler@chromium.org>
