This enables the EC to switch the signals to ANX7808 properly.
BUG=chrome-os-partner:18165
TEST=Manual on reworked Spring board
BRANCH=none
Change-Id: Ib3ff57e17afab9ba8fc78fdb037e65aae844f38b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44897
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This allows the AP to shut down cleanly. If it doesn't shut down in
that time period, the EC will forcibly shut it down.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
1. With system off,
- battfake 2 -> EC hibernates immediately
2. With system on,
- battfake 2 -> battery shutdown event posted to AP
- power off system manually within 30 sec -> EC hibernates
3. With system on,
- battfake 2 -> battery shutdown event posted to AP
- do not power off AP
- after 30 sec, EC shuts down AP then hibernates
4. With system on,
- battfake 2 -> battery shutdown event posted to AP
- after 15 sec, apply AC power
- system does NOT shut down
- remove AC power -> battery shutdown event posted to AP
(because battfake 2 is still faking 2% battery left)
- after 30 sec, EC shuts down AP then hibernates
(check to make sure the full 30 sec elapses; the timer
should have been restarted when AC power was removed;
if the EC shuts down the AP immediately this is a
failure indicating the timer is still running from
the first shutdown event)
Change-Id: I1a13765f501d705d3a580b2acbbb173d47e020ff
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44413
This preserves more battery for the real-time clock. It also gets rid
of one battery level/state, since the EC will now shut down at the
same level (2%) as the AP.
Having the EC hibernate at the same level as the AP shuts down also
prevents the following weird scenario:
- EC powers on at 2% battery.
- EC won't power on the AP to do software sync because battery is low.
- But the charge state machine won't actually hibernate the EC until 1%.
- Between 2% and 1%, AC is inserted and system starts charging.
- But EC-RO is what's doing the charging; we should go through software sync
before charging.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
On battery power,
1) With system on, battfake 2 -> system shuts down and EC hibernates
2) With system off, battfake 2 -> EC hibernates
Change-Id: I87d17f70d60673f3e3f1c6eb88f3f00a8c9ed4e7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44314
When in battery assit mode, show breathing yellow on battery LED slowly
to indicate battery is actually discharging.
BUG=chrome-os-partner:17561
TEST=Manual
BRANCH=none
Change-Id: I688470d8870b181bf2dd20b5ebcbd6e2d861c5b0
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44514
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is a precursor to changing the switch state machine to delay
powering on the AP until the charge_state module knows if there's
enough power to do so (which it will know when it leaves the INIT
state).
BUG=chrome-os-partner:17124
BRANCH=link
TEST=manual
1. Reboot EC on battery power. See charge state init->discharging
2. Plug in AC. See charge state discharging->reinit
(charge state will then transition to some other charging or idle state
based on battery level)
Change-Id: Ia02cc8b37e9b5e8d6dd8c2fbfdf14e385694b1bf
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/44291
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
To decrease the amount of time needed for PMU ADC reads, add the option
to keep the ADC reference voltage enable as its stabilization time is
the longest pole.
Also set the stabilization time to 10ms as the max defined in the
datasheet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:17997
TEST=on Spring, measure EC_CMD_POWER_INFO latency and see it going from
49ms to 18ms.
Change-Id: I7ed20bcddab165250108eb9f768539b19fa251de
Reviewed-on: https://gerrit.chromium.org/gerrit/44008
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Since TSU6721 processing is integrated into PMU task, an interrupt
closely following previous one may be dropped. We should check interrupt
status before yeilding control.
BUG=chrome-os-partner:14319, chrome-os-partner:14318
TEST=Boot on Spring. Check TSU6721 functionality.
BRANCH=none
Change-Id: I7ce1c70a214bb4afc9456eb206203cc6c3fe2f33
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43862
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Getting voltage and current can be handy when verifying hardware design.
Let's add host command to do this.
BUG=chrome-os-partner:17880
TEST=Manual on Spring
BRANCH=none
Change-Id: I4d4f6a42a9d0f917292d092e132ccd9ce3367fd6
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43508
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The new 'battfake' command is really handy for testing low-battery
shutdown logic.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=from EC console:
reboot
battfake -> using real battery level
power on system -> lightbar should be blue
battfake 5
lightbar turns red after a few seconds
UI shows battery is very low
(shows <5% due to different kernel math)
'ectool battery' from root shell shows present capacity ~5% of
design capacity
remove AC power
battfake 4
UI shows low-battery screen and shuts down (may take a minute)
battfake 50
power on system
UI shows battery at 45-55%
battfake 2 -> system shuts down immediately
battfake -1
power on system
UI shows actual battery level
Change-Id: I3180e321241c0f586f3baad2150fb6a2b2d2e242
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43151
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
In preparation for cleaning up low-battery logic. Make clear what
comparison operator is used for each constant (<=, <, >=, >).
Also remove hard-coded and unused display of design warning/low
battery levels from ectool. Verified via code search that these are
not used anywhere. Even if we later care about these levels, they
should be battery-specific and not hard-coded as a
platform-independent percentage of full capacity when ectool is
compiled.
BUG=chrome-os-partner:17124
BRANCH=link
TEST=compile link; 'ectool battery' from root shell prints valid info
Change-Id: I3650e27a08f4cc77067beb0685ee1488cc56d02f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/43119
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This uses D+/D- voltage to distinguish different Apple chargers.
BUG=chrome-os-partner:14319
TEST=Manual on Spring
BRANCH=none
Change-Id: I50075d466f6e6b1adf613748cf433d7f43c04bfe
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/42850
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This implements a basic battery LED policy:
- Charged: green
- Charging: yellow
- Error: red
- No charger: off
BUG=chrome-os-partner:17561
TEST=Manual
BRANCH=none
Change-Id: I7fa8242efa4d0382d8ef0cafe80f01d44c390397
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/42607
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This makes it possible to define color constants so as to reduce code
size when called.
BUG=chrome-os-partner:17561
TEST=Build success.
BRANCH=none
Change-Id: I800b8d4b84749907b071febfea58d27fef7cc2b7
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/42617
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow to send commands to the smart battery using EC commands when the
battery is connected to an I2C bus behind the EC.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:14314
TEST=on Spring, with a kernel including patch to use the pass-through
for the sbs-battery driver, run "power-supply-info" and see the correct
information.
Change-Id: Ie10f1c95afe4a33cf0b55d5a0de7640d5971ebb3
Reviewed-on: https://gerrit.chromium.org/gerrit/41289
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Allow to send commands to switch on/off the TPSchrome LDOs by using EC commands
when the TPSchrome chip is connected to an I2C bus behind the EC.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:14314
TEST=on Spring, with an updated bootloader, switch on screen FETs from
U-Boot instead of hardcoding them in the EC board code.
Change-Id: Ic6cebf04ba73a7c0ca2c54f532f8cf4c953ac0c1
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/41288
Reviewed-by: Vic Yang <victoryang@chromium.org>
To make test and bring-up easier, adds a host command for USB mux
switching.
BUG=chrome-os-partner:17111
TEST=manual
BRANCH=none
Change-Id: I9da43fe934881ce24f326275ef312c4e6a474f11
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/40586
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This adds USB port control to charger task. For now, it only senses
attached device type and log it to console.
BUG=chrome-os-partner:14319
TEST=Attach/detach charger and see console output.
BRANCH=none
Change-Id: I1218d520c292d9d398c868122ae3876d3fc889bc
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/40078
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is a prepartory work for integrating USB port control into PMU
task.
Currently TPS65090 charger task is throttled to only waken by event once
per 500 ms. This in a way makes it hard to integrate other functionality
into this task. This CL moves the throttling mechanism to interrupt
handler so as to provide better control of when to throttle the
interrupt event.
BUG=chrome-os-partner:14319
TEST=Build success and boot on spring.
BRANCH=none
Change-Id: I72e63180442b379a379e1a87c10ef62395434872
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/40189
Reviewed-by: Rong Chang <rongchang@chromium.org>
This adds functions to control interrupt and get device type from
TSU6721.
Also expose initialization function so that we can initialize TSU6721
before we solve the initialization problem.
BUG=chrome-os-partner:14318
TEST=Build success.
BRANCH=none
Change-Id: Ia50f1c93309360d35902a707090694e94a3f7a74
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/40077
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
for now, just control the USB pins muxing.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:14318
TEST=on Spring, put the EC UART on the micro-B connector and read it
using a modified FTDI cable.
Change-Id: Ib0c87e483fb0bbe1835bd6ea008176b88d6f12f8
Reviewed-on: https://gerrit.chromium.org/gerrit/38361
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Add an interface to allow the CPU to cap the maximum battery charging
current.
The maximum is removed every time the machine goes to S3 or S5.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=link
BUG=chrome-os-partner:16041
TEST=on Link, plug AC to charge the battery,
then run "ectool chargecurrentlimit 1200" and see
the charging current in "power-supply-info" decreasing to 1.2 A.
Change-Id: I10900e1c264d2db67809638ec0dcb836d721fa75
Reviewed-on: https://gerrit.chromium.org/gerrit/37532
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Add i8042 output port commands (0xf0-0xff), I8042_ENABLE_A20 and
I8042_DISABLE_A20.
BUG=chrome-os-partner:13119,
BRANCH=None
TEST=Tested on W7 installer. No KB error shown on EC console.
Change-Id: I9ad1fd7baa10683ef18ccf13faf09dc0cefcca0a
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/34994
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
They're not x86-specific, so move to the chipset interface.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=x86reset warm, then x86reset cold. Should reboot OS in each case.
Change-Id: Ib571ab916bab16179198a0d054320e59afbae124
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36785
This reduces memory / code size, and gets rid of ifdefs in temp_sensor.c.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=boot system and run 'ectool temps all' every few seconds
- ectool temps all
The numbers should update over time.
Change-Id: Idaac7e6e4cbc1d6689f5d3b607c623a5cc536a4f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36940
The time out value passed to task_wait_event() is signed 32-bit and
thus waiting for 24 hours will cause overflow. Limit max wait time.
BUG=chrome-os-partner:15797
BRANCH=link
TEST=Disconnect AC, shut down system, and close lid. From ec console,
do 'hibdelay 8000' and then wait 2.5 hours. EC should have
hibernated. (8000 is more than twice the max time for
task_wait_event())
Change-Id: I5fa505554182e8bad6399c12a382ff71bb123d8f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/37095
Reviewed-by: Vic Yang <victoryang@chromium.org>
Support the keyscan test functionality on stm32.
Note: This is enabled by default so that it continues to build. But it
is unlikely that we will want this in a shipping image. I suggest we add
the facility for a dev build.
Secondly, the stack has to be larger due to a printf (which admittedly I
could just remove). Should we make the stack size conditional on the
CONFIG? Seems a bit ugly, on the other hand we don't want to waste IRAM.
BUG=chrome-os-partner:12179
BRANCH=none
TEST=manual for now:
On snow:
./ectool keyscan 20000 key_sequence.txt
See that the test passes.
Change-Id: Ic441ca0bde1be9589a924374605e2f146d16f423
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/35118
PWM and temp sensor monitoring want to happen every second,
vs. several times a second for watchdog and LPC.
This is still considerably simpler than having tick functions declare
an interval at which they want to be called, which would require a
RAM-based array of pending tick functions and alarm times. If you
need that level of complexity, you still need a task.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=temporarily add HOOK_TICK and HOOK_SECOND hooks and see that on
LM4, HOOK_TICK is called 4x a second and HOOK_SECOND is called every
second.
Change-Id: I5c09842fd356d3254021486949b2799142068b4f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36938
Commit-Ready: Simon Glass <sjg@chromium.org>
Since it handles not just power button, but also lid switch, AC
detect, and other switches.
No functional changes; just renaming.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system, power on/off with power button
Change-Id: I51628a52293f7207715f5f6bf368a08fe6c3dbce
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36821
No functional changes; just code cleanup. On LM4 this also #ifdef's
out the 'sleep' and 'pll' commands since they're big and we don't use
them.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system
Change-Id: I1b72d07d6cca2c783d7ac4c880119df3e88e356e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36799
No functional changes
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system; use gdb to connect to EC
Change-Id: I2817d04e4de102e4201506cfe51cdf0bd939fcdb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36802
Reviewed-by: Simon Glass <sjg@chromium.org>
Tidied comments, and removed handling of ACPI events on host command
port (not needed since EVT hardware is now EOL'd).
BUG=chrome-os-partner:15579
BRANCH=none
TEST='ectool hello' succeeds
Change-Id: I063382b9981f713ba23f7714b4ccb7faa957b411
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36804
And change some direct uart_printf()/uart_puts() output to console
output methods instead. Disable unused comxtest debug command. No
other functional changes.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system; should still see debug output with reset flags
Change-Id: I57fe6bb781a1ba7884afa6d090b74a92f45a53cc
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36835
Adds a new HOOK_TICK event which is called every 250ms (LM4) or 500ms
(STM32). This will be used to consolidate a number of tasks which do
small amounts of work infrequently, and previously needed their own
task functions.
This CL adds the tick task; subsequent CLs will consolidate watchdog
and other tasks into tick hooks.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=taskinfo shows TICK task as lowest priority
Change-Id: I9068ee99d56a5bf5c12afd86ad51998c013f4954
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36908
Reviewed-by: Simon Glass <sjg@chromium.org>
No functional changes
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system, power off with power button, power on with power button
Change-Id: I25aa5c527b7b9f9db6f5c539cecb37ac4bc197f8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36820
Reviewed-by: Simon Glass <sjg@chromium.org>
ADC config structs are now chip-specific; this saves code size
(several hundred bytes on LM4, since no need for 24-entry ADC channel
to GPIO mapping table).
BUG=chrome-os-partner:15579
BRANCH=none
TEST='adc' with system on and off; ChargerCurrent should be bigger when on.
Change-Id: Ia88b3f043438bec049f2d2ad39fc42dcf86d9424
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36798
We'd defined them in a number of different files. This moves
definitions to timer.h, and uses them everywhere we have large delays
(since 10*SECOND is less typo-prone than 10000000).
Also add msleep() and sleep() inline functions. No need for mdelay()
or delay(), since any delays that long should use sleep funcs instead
of spin-waiting.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system; taskinfo displays similar numbers to before
Change-Id: I2a92a9f10f46b6b7b6571759b1f8ab4ecfbf8259
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36726
This removes the duplicate uart_emergency_printf() vs. panic_printf()
/ uart_emergency_puts() vs. panic_puts() implementation and saves
~0.5kb of code size.
The other significant change is that uart_flush_output() is now smart
enough to determine if it's in an interrupt; if so, it will spin-flush
the output buffer instead of waiting on the uart interrupt. This
removes the need for a separate panic_flush().
BUG=chrome-os-partner:15579
BRANCH=none
TEST=crash unaligned; should print well-formatted crash dump
Change-Id: Ifae756203dd1881806be563308077c1d68302e1f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36695
Just code cleanup; no functional changes
BUG=chrome-os-partner:15579
BRANCH=none
TEST=build link and snow
Change-Id: Ib62f805777994b39cd9f47a721f52529bb9399c5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36573
Reviewed-by: Simon Glass <sjg@chromium.org>
No functional changes.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=plug in USB mouse; is powered when system is on
Change-Id: Icbad3035f384191daa2b6dfae61d78f18ece1d76
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36613
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This copies the parts of sha256.c that we need from vboot_reference,
and removes the explicit dependency on vboot_reference. That
dependency was a good idea when we were doing full verified boot in
the EC, but is now overkill and makes it harder for others to reuse
the EC code. This also lets us call EC functions directly instead of
needing vboot_stub.cc; that reduces code size by ~100 bytes.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=vboot_hash ro, then compare with result of sha256sum build/link/ec.RO.flat
Change-Id: I0f236174291df3e7f3c75e960fe9ab32af305a61
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36589
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
No functional changes. (it might look like
SYSTEM_HIB_MINIMUM_DURATION is a change, but it's not used at present)
BUG=chrome-os-partner:15579
BRANCH=none
TEST=version; chip info should print successfully
Change-Id: Idd7f60a29528e9f6af4f91cd5a556e7336acee9f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36599
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
