Erasing the flash can take a while, by which time the host may have timed
out. So pass an in-progress message back to the host before starting, and
when done, stash the result for later collection.
BUG=chrome-os-partner:12685
BRANCH=snow,link
TEST=manual
build and boot to kernel on snow
Change-Id: I5566a5519a1c8b320573b20e1ea7660217b32a5e
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30471
To reflect the CL 00799d5 that moves the pstate to 0xf000.
BUG=chrome-os-partner:12799
TEST=Build in chroot.
snow: WP_RO is changed from 0:0xf000 --> 0:0x10000.
daisy: WP_RO is unchanged.
link: WP_RO is unchanged.
Change-Id: I572bae3f624744e60d13a762875211beffc6c516
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30670
Reviewed-by: Vic Yang <victoryang@chromium.org>
Adds shmem command to print amount of shared memory. This is also a
useful indicator of how much IRAM is left, since shared memory will
expand to fill all unused IRAM.
Removes never-implemented wait param to shared_mem_acquire().
BUG=none
TEST=shmem
Change-Id: I798ff644d701dcba52219b70bec99c06a23d03ec
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/29809
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This removes a bunch of unnecessary typecasts, since you can assign
to/from void * without them. This also uncovered a few cases where
const was being cast away for the input params; now fixed.
BUG=none
TEST=mkbp hash from u-boot console, and/or system boots ok
Change-Id: Ic314b9d2ca06226ea8a09703ef5c1a912eb7146d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28500
This is a significant rewrite of the flash module, since it turns out
that much less of the flash logic is actually common between stm32 and
lm4.
BUG=chrome-os-partner:11699
TEST=on link,
(enable hardware wp)
flashinfo -> wp_gpio_asserted
flashwp enable
flashinfo -> wp_gpio_asserted ro_at_boot
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
flashwp disable -> error 7
flashwp now
flashinfo -> wp_gpio_asserted ro_at_boot ro_now rw_now
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
(disable hardware wp)
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> (no flags)
Change-Id: If22b02373946ce1c080d49ccded4f8fa3e380115
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28200
Reviewed-by: Vic Yang <victoryang@chromium.org>
Everything now uses flash_dataptr() to get at flash memory rather than
calling the read function, since the read function adds a needless memcpy().
BUG=chrome-os-partner:11150
TEST=manual
flashwp enable
reboot
flashinfo -> should show ro_at_boot
flashwp disable
reboot
flashinfo -> should no longer show ro_at_boot
Change-Id: I1830e2f036cf6777115c782c1737335ff2eb4ce0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27796
Since that already monitors the WP signal for reporting it as a
switch. And if we have that code in two places and the WP signal
polarity changes, we'll inevitably forget to change it in the other
place...
BUG=chrome-os-partner:11150
TEST=manual
flashinfo -> WP pin asserted
remove WP screw
flashinfo -> WP pin deasserted
Change-Id: I6091c8bb470c357e02ede8a5b184b2a76b70dc60
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27720
Now that read-only code is protected iff the persistent state is
locked, we don't need to track per-block in the persistent state.
BUG=chrome-os-partner:11150
TEST=if it builds and boots, it's fine
Change-Id: I80e6a85c0c72136b7ed8964ce02c8abdbaafe637
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27719
1. If the flash protection state is locked, RO firmware is explicitly locked.
2. Protecting flash now locks the entire flash.
BUG=chrome-os-partner:11150
TEST=manual
flashinfo -> nothing protected
flashwp now
flashinfo -> unlocked,applied; everything protected
reboot
flashinfo -> nothing protected
flashwp lock ->
flashinfo -> locked,applied; now has 40 Y's at start and 1 at end
reboot
flashinfo -> locked,applied; now has 40 Y's at start and 1 at end
remove WP screw
reboot
flashinfo -> locked, not applied; nothing protected
flashwp unlock
flashinfo -> nothing protected
Change-Id: I2cf0e8bfe82ab7a5bf88b9161b7a05b889cae71a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27717
Uncomment back the old code and fix the bug of WRP bit definition and
also write_opt().
Note that to make this functional, wp_pin_asserted() always returns true.
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Change-Id: Ic09d3346ca68a2700697ff863f0fa08525129b11
BUG=chrome-os-partner:9849
TEST=run on lucas.
> flashwp set 0 0x1f000
> flashwp lock
> flashinfo # ensure the setting is right.
stm32mon -r to read the firmware.
stm32mon -w to write a different image.
stm32mon -r to read again and compare the firmware is non-changed.
> flashwp unlock
Command returned error 1
stm32mon -u to unlock write protection.
Reviewed-on: https://gerrit.chromium.org/gerrit/27503
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Ready: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Tested-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
If flash starts at zero, then flash_dataptr() will return NULL for a valid
region. Change the function around so that it can be used in this case.
BUG=chrome-os-partner:10146
TEST=manual:
Modify code it print out parameters and problems, then:
Writing 256 bytes to 0x0...
0 256 64
ok 131072
Command returned error 1
> flashwrite 0 256
Writing 256 bytes to 0x0...
0 256 64
ok 131072
Command returned error 1
> flashwrite 0 255
Writing 255 bytes to 0x0...
0 255 64
Command usage/param invalid.
Usage: flashwrite offset [size]
Change-Id: I5683fc181ef780310ceff50f120735659e973784
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26749
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Sometimes it is useful to get access to the flash directly, without using
flash_read(). Add a function to do this.
Since the range checking is done in every function in flash_common,
use the new function to do it for us. That way we get a slight (64 byte)
code size reduction.
BUG=chrome-os-partner:10146
TEST=manual:
build and boot on snow with SPI flash emulation, in U-Boot:
See that the 32KB of flash has been provided correctly.
Change-Id: I6622a24234edaed371dd5b9bf43d1f3974d55e39
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26174
This simplifies the re-flashing for stm32 based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=On Daisy, flashrom -p internal:bus=lpc -w ec.bin
Change-Id: I66860383c34110b1edf852929c244a2b682bc105
The VMA of the .data segment is in RAM, but we actually put it into FLASH.
The linker doesn't notice if it runs out of flash, so it creates an invalid
image.
This adds an explicit check to be sure it all fits. It also refactors the
region declarations to be more explicit. For vboot-enabled configurations,
CONFIG_SECTION_* - describes the extent of flash for one entire image
CONFIG_FW_* - the region within the SECTION for the firmware only
CONFIG_VBLOCK_* - the region within the RW SECTIONs for the vblocks
CONFIG_VBOOT_ROOTKEY - the region within the RO SECTION for the root key
Look at chip/lm4/config.h for the best example.
BUG=chrome-os-partner:9839
TEST=manual
Build it, run it.
Change-Id: I3c652e82d58a5328115cc750c80ecba6a3fd99a3
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Implements the on-chip flash erasing and writing functions.
The actual writing is done from a routine in internal RAM (using the
special .iram.text section) with interrupt disabled as we cannot read
flash during the writing process.
The write-protect feature is only lightly tested.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=run on Daisy, from the EC console, use flasherase and flashwrite
commands and observe the results using rw command.
Change-Id: I4c64cf28b23df52b18500b42a32a7d3668d45ba6
Servo2 can set the write protect signal
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8580
TEST=manual
From chroot:
dut-control fw_wp_en:on
dut-control mfg_mode:on
Then from EC console:
gpioget WRITE_PROTECTn
0 WRITE_PROTECTn
From chroot:
dut-control fw_wp_en:on
dut-control mfg_mode:off
Then from EC console:
gpioget WRITE_PROTECTn
1* WRITE_PROTECTn
Change-Id: I9976cd6f114c8dae75434adf99d9409107b6ada0
This uses the last bank of flash to hold persistent settings, and
looks at the write protect GPIO to decide whether to protect the chip
at boot (chrome-os-partner:7453).
For ease of debugging, I've temporarily hacked this so flash uses the
RECOVERYn signal (dut-control goog_rec_mode:on) to enable WP instead
of the write protect signal; this works around chrome-os-partner:8580.
Also note that if you write protect any blocks even temporarily,
you'll need to do a power-on reset to clear them before you can
reprogram the flash. See chrome-os-partner:8632. At the EC console,
"hibernate 1" will do that, or you can just yank the power.
This also fixes a bug in the flash write and erase commands, where
they weren't properly detecting failure if you attempted to modify a
protected block (missed an interrupt reason...)
New "flashwp" console commands work. LPC commands need reworking.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8448
TEST=manual
Change-Id: I49c38cc25c793094ae3331a4586fda0761b4bac6
