And fix returning memory-mapped string length on LPC as well.
BUG=chrome-os-partner:11090
TEST=manual
from EC, 'hostevent set 0x40000'
from host, 'ectool eventget' --> should print 0x40000
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I9edbd0a1468b5d4160ce67c471332226e51fa868
Reviewed-on: https://gerrit.chromium.org/gerrit/26719
Reviewed-by: Simon Glass <sjg@chromium.org>
In preparation for being able to copy ec_commands.h to u-boot, which
is itself in preparation for u-boot picking it up from /usr/src/ec/
BUG=none
TEST=make link, snow, bds
Change-Id: If256434b6722ff0787ce21a8ed4c7035c28024a8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26451
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
This is more compatible with kernel and u-boot, and will make it
easier to share code between the ec project and those.
BUG=none
TEST=manual:
ectool version -> should work normally
on ec, do 'hostevent set 0x40000'. Then at root shell
ectool queryec
EC returned error result code 19
ectool flashread 0x100000 16 foo
Reading 16 bytes at offset 1048576...
EC returned error result code 2
Read error at offset 0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I5e2a85f96c874d0730c14e1438a533649cd594f8
Reviewed-on: https://gerrit.chromium.org/gerrit/26359
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
This updates the flash_size to match 128KB parts. Unfortunately
there does not seem to be an easy way to differentiate between the
64KB and 128KB parts at runtime.
BUG=none
TEST=tested on Snow
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ie1ca6f6d04753e91d937f67dec193fcf5566251e
Reviewed-on: https://gerrit.chromium.org/gerrit/26188
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Ready: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
And if RW B isn't enabled, it's not even linked.
BUG=chrome-os-partner:10881
TEST=on link, should be no B image, and 'sysjump B' should fail
On BDS, still should be A and B images
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Icb2af07881cc7e28b9b877f45824486a22fde8d7
Reviewed-on: https://gerrit.chromium.org/gerrit/26116
EC computes a SHA-256 hash of its RW code on boot. Also adds host and
console commands to tell the EC to recompute the hash, or hash a
different section of flash memory.
BUG=chrome-os-partner:10777
TEST=manual
1) ectool echash -> should match what the EC precomputed
2a) ectool echash recalc 0 0x10000 5
2b) on EC console, 'hash 0 0x10000 5'
2c) results should agree
3a) on ec console, 'hash 0 0x3e000' then quickly 'hash abort'
3b) ectool echash -> status should be unavailable
4) ectool echash start 0 0x3e000 6 && ectool echash && ectool echash abort && sleep 2 && ectool echash
status should be busy, then unavailable
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I6806d7b4d4dca3a74f476092551b4dba875d558e
Reviewed-on: https://gerrit.chromium.org/gerrit/26023
This forces the fan PWM duty cycle to a fixed percentage (0-100). It's only
used for airflow testing.
BUG=chrome-os-partner:10747
TEST=manual
Using this ectool, try
ectool fanduty 0
ectool pwmgetfanrpm
ectool fanduty 50
ectool pwmgetfanrpm
ectool fanduty 100
ectool pwmgetfanrpm
You should see (and hear) the fan speed up. If you have an EC console, you
can run
faninfo
and it should show that the 'Target:' is unrelated to the 'Actual:' value.
Change-Id: Iac332fb3ba63f96726cf7f64061b3ce22d2e76fd
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25965
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Also removes unused recovery request, since AP handles that internally now.
BUG=chrome-os-partner:10685
TEST=manual. From root shell,
ectool reboot_ec RO -> EC reboots to RO, AP stays up
ectool reboot_ec A -> EC reboots to A, AP stays up
ectool reboot_ec cold -> EC reboots, AP shuts down
ectool reboot_ec cold at-shutdown -> (EC stores request, but doesn't reboot)
shutdown -P now -> EC reboots when AP shuts down
ectool reboot_ec cold at-shutdown -> (EC stores request, but doesn't reboot)
ectool reboot_ec cancel -> (EC stores cancel-request)
shutdown -P now -> AP shuts down, but EC doesn't reboot
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I51bbf997f6b7f94fe61f06a8a1804c3cc5c319b8
Reviewed-on: https://gerrit.chromium.org/gerrit/25791
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The script ensures that the servo parameters are correct,
and restores original servo parameters afterwards.
Daisy EC flashing works from the build tree :
./util/flash_ec --board=daisy --ro
The Link flashing is using the new openOCD 0.5.0 in the chroot.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=./util/flash_ec --board=snow --ro
./util/flash_ec --board=link
Change-Id: Ifc87a8d21a5dac6ad8c4a0fb38694aa5f5bbf992
Reviewed-on: https://gerrit.chromium.org/gerrit/21664
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
1) Smaller start delay for commands
2) Reads can use the entire 128 byte parameter space
This improves read speed from 350ms/64kb to 210ms/64kb.
BUG=none
TEST=ectool flashread 81920 81920 then compare with ec.A.bin
Change-Id: I53d460bace5f21db845a3f8ec681507fca0f7b0e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/25562
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add the minimal amount of stubs (namely MOSCCTL, UARTCC and FLASH_FMPPEx
registers) to the emulation to be able to boot link EC firmware and
pass OS tests.
the QEMU binary is generated from the chromeos-ec-0.15.1 sandbox of the
chromium.org qemu.git repository at hash 1a48940.
I will add next better GPIO control and default states to ensure we are
booting the proper mode.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:10240
TEST=make qemu-tests BOARD=link
./util/run_qemu_test -b link
Change-Id: I3d7b9247628133289e0ef04bb7d85c7438b6ed81
Reviewed-on: https://gerrit.chromium.org/gerrit/24880
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
- update strings which were modified by the message text "compression"
- updated QEMU which supports a couple of additional registers for LM4F
(getting internal oscillator calibration status and writing timer
counter through TAV)
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:10008
TEST=make qemu-tests
Change-Id: Idf0ee13f354b4e14405e949861d426f3e4c3022b
Reviewed-on: https://gerrit.chromium.org/gerrit/24827
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
- throw away all the incoming garbage after a NACK to be protect against
unexpected behavior on the embedded monitor.
- increase the command timeout :
on STM32F100, I have measured up to 1.4s to execute the erase 64kB
command. With the current 2s timeout, it was failing when you are
unlucky (since it's using a integer second timestamp to measure the
timeout).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=with a Snow, flash the board using stm32mon -w ec.bin
from various states.
Change-Id: I260b3b1311eac9be7c43f835eeac68051befd24a
Reviewed-on: https://gerrit.chromium.org/gerrit/24314
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
We need to be able to toggle these signals to increase test coverage.
BUG=chrome-os-partner:9967
TEST=Toggle 'ectool wireless' and see GPIO signal changes.
'ectool backlight 0' and see LCD backlight turn off.
Change-Id: Ic96fe26aa82c33b0e51e1f973280a0edc322f158
Reviewed-on: https://gerrit.chromium.org/gerrit/23625
Commit-Ready: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
This produces a host binary running on the application processor and
which is able to re-flash th EC firmware over the AP-to-EC link (either
LPC or I2C).
The payload (ie the EC firmware) to use is embedded inside the flasher
binary.
This is just aimed at testing and developer upgrade. The auto-update
flow is using flashrom.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=build for link/daisy/snow/bds and tests
On Snow, run burn_my_ec from the serial console and see that the EC was
correctly re-flashed.
Change-Id: I7f90e773678a7ef3d8dc6dbacf54e80f3294607b
Reviewed-on: https://gerrit.chromium.org/gerrit/24236
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
The udelay() has big overhead so that repeating calling leads big errors
(expect 1 sec of timeout, but actually 12 secs of timeout).
So, the improvement is to double the udelay count when BUSY bit is set.
Even better, if we can check the I/O port content before really running
the EC command, it can save more time.
BUG=chrome-os-partner:10003
TEST=tested on link, alex, zgb, lumpy, stumpy and mario.
Only mario takes 1 second to timeout.
Others stop when checking ports (takes around 0.01 second).
Change-Id: I96c6d8cbe6226d05428a2ab126815e934942f5a9
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
In order to enable automatic keyboard testing, let's add key press
simulating command to ectool.
BUG=chrome-os-partner:9188
TEST='ectool kbpress 4 6 1' and see 'j' pressed.
'ectool kbpress 4 6 0' and see 'j' released.
Change-Id: I5a445e13aad2bd09aa6e9a1d62995cf34b782aeb
When keyboard backlight is disabled, make 'ectool pwmgetkblight' reports
'disabled'.
BUG=chrome-os-partner:9966
TEST='ectool pwmgetkblight' shows 'Keyboard backlight disabled' when
lid closed.
Change-Id: Ica690159e30431ccb530275fcc2311fb8f54a9aa
Allow to use EC tool on ARM based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On Daisy, ectool version
Change-Id: If7f52de827d0bcffb39af0553245cce4e02b9b48
Preparatory work to re-use the tools on ARM boards using I2C
communications.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make BOARD=link && make BOARD=bds && make BOard=DAISY
Change-Id: I31d41f30c3231a4a9349b939bf6bba871ed4c383
This adds "ectool vboot", which works like so:
# ./ectool vboot
0x06 image=A fake_dev=1
# ./ectool vboot 0
# ./ectool vboot
0x02 image=A fake_dev=0
# ./ectool vboot ff
# ./ectool vboot
0x06 image=A fake_dev=1
You can set or unset the fake dev-switch, and see which firmware image the
EC is running from.
BUG=chrome-os-partner:8313
TEST=manual
Boot the host, use crossystem to see the devsw_boot state. Change it with
the ectool command, reboot, see that it's changed.
Change-Id: Iaac40267338c6a07bc47b80e925e829bf1e1ae0c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
In order to perform testing across all future boards and enable easier
debugging, we need a host command to read temperature sensor name and
sensor type.
BUG=chrome-os-patner:9836
TEST='ectool tempsinfo 0' shows sensor name and its type.
Change-Id: I06d9c6b045902394179c35e2ee8bc8dc551e8e98
Preparatory work to use common host command code between ARM and x86.
Just rename constants, do not change the binary API.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I534d427c9b50103273835a6f32a0ddb622c762b3
BUG=chrome-os-partner:7459
TEST=manual
In the chroot:
cd src/platform/ec
make BOARD=link
The firmware image (build/link/ec.bin) is signed with dev-keys. Reflash the
EC and try it, and it should verify and reboot into RW A.
Additional tests (setting USE_RO_NORMAL, poking random values into VBLOCK_A
or FW_MAIN_A to force RW B to run, etc.) are left as an exercise for the
reader. I've done them and they work, though.
Change-Id: I29a23ea69aef02a11aebd4af3b043f6864723523
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Instead of making the STOP command synchronous, we can just have the
host-side app tell the EC to stop, then poll until it has.
BUG=chrome-os-partner:9349
TEST=manual
"make BOARD=link", then
copy build/link/util/lbplay to the host and run it.
Change-Id: I846924ae7994a498e0089197785cf239898fe2a3
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Rong Chang <rongchang@chromium.org>
BUG=chrome-os-partner:9152
TEST=manual
run latest ectool with old EC image
Change-Id: I09d4f6e8fcc131da227fc5a9c48291b08dfb6d19
BUG=chrome-os-partner:7839
TEST=manual
cd src/platform/ec
make BOARD=link
copy ./build/link/util/lbplay to the host and run it as root.
Change-Id: I6a4a842b7500751185c8f4c2744f4389226bae9b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:7839
TEST=manual
Try "lightbar help" on the EC console and "ectool lightbar help" on the
host. You should see the same commands and behavior.
Change-Id: I6e879e8bb892ef5ada7ef85a97fdf243149f4cb6
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
The commands in ectool.c look like this:
int cmd_foo(int argc, char *argv[]) { ... }
but unlike normal C convention, argv[0] is NOT the command. This change
makes argv[0] be the command name, so it's just like main().
BUG=chrome-os-partner:8748
TEST=manual
Run ectool as usual. You should see no difference in behavior.
Change-Id: Ia92784d46a287ab08f279f6255487817b620f200
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Add a host command returning chip information. The interface is in common/
while the implementations are in chip-specific code (note: added simple
value for stm).
BUG=chrome-os-partner:8567
TEST=on board
% ectool chipinfo
Chip info:
vendor: xx
name: yyyy
revision: zzzzz
Change-Id: I5030a03a6fcfbfc080d5acd8efb763fde7eefde5
This data is used to populate the _BIF/_BIX packages in ACPI
but it currently needs an EC command to retrieve that isn't
easy to query in ACPI since it isn't using standard EC RAM.
1) Export these additional fields in init() state:
- Design Capacity of Full
- Design Voltage
- Last Full Charge Capacity
- Cycle Count
- Manufacturer String
- Model String
- Serial Number String
2) Fix an issue where battery current was not reported when
the battery was charging.
3) Remove the command interface so there is no duplication.
BUG=chrome-os-partner:7734
TEST=using (not yet published) coreboot to read battery status
via ACPI and verify that battery removal/insertion events
are properly handled.
Change-Id: If337aad3255e5b1a0f85168838f1dd86a32bbeb3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
BUG=chrome-os-partner:8728
TEST=manual
I don't have a system that has both an EC and a lightsaber, so I can't be
certain this works, but I *think* it will.
I do have a Link proto 0.5. With that, you can say
ectool lightbar test
and the EC console says it's poking at the lightbar, but of course there's
nothing there. If there was, it *should* flash in pretty colors. I have a
lightsaber attached to a BDS, and from the EC console running "lightsaber
test" does make it blink.
Change-Id: Ib6021ad8e53959de52b12efda376254071e5fb4b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
This reverts commit dfe22b2b1e.
We seem to have solved I2C block issue. Reverting the workaround LPC
command and ectool command.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8239
TEST=Compilation succeed. Manually tested temperature polling still
works.
Change-Id: I0acb567a138282479c7cc07cbfa723c439d04cd7
Group temperature sensors into different types so we only have to set
temperature threshold for each type instead of each sensor.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8466
TEST=Fan control still works.
Change-Id: I7acc714c32f282cec490b9e02d402ab91a53becf
Update test python scripts for recent trace modifications :
- lack of firmware B
- updated motd
Update QEMU to deal gracefully with various new registers accesses.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make qemu-tests
Change-Id: I59a53822193b7377fe5f61f75c951b6cd24fc54b
This works similar to SCI/SMI events, but triggers a separate
level-sensitive signal to the PCH instead.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8514
TEST=manual
From EC console:
gpioget PCH_WAKEn --> should be 1
hostevent wake 0x1
close lid switch (with magnet)
hostevent -> should show wake mask 0x1, raw events 0x1
gpioget PCH_WAKEn --> should be 0
hostevent clear 0x1
hostevent -> should show raw events 0
gpioget PCH_WAKEn --> should be 1
Change-Id: I29832c1dc30239a98987578f07dfeb25791dde11
Until we solve the I2C hanging issue, we need a reliable way to read
temperature. Add back LPC temperature read command that actually trigger
a I2C read.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8452,chrome-os-partner:8495
TEST=none
Change-Id: Icddd1fe3c1f09889bca633af19041a8aca582de9
Make temp sensor report 0xfd when sensor is unpowered.
Also refactor power specification of temp sensors from thermal.c to
temp_sensor.c.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8279
TEST=none
Change-Id: Ib13813bdbac2f048fbc3b98fae5bbf104ebf37d7
Note that this is a big security hole and should be removed after we
complete the EC autoupdate mechanism and vboot code.
To full update EC firmware on proto 1.0, we need a manual way to switch
EC running on RO/RW. This CL implements the LPC command.
BUG=chrome-os-partner:8415
TEST=on proto 0.5.
ectool reboot_ec RW_A # EC boots to RW A
ectool reboot_ec RO # EC boots to RO
Change-Id: Ibf050328bc4e3d2c6d72bfc478d6334f11f0eb46
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8325
TEST=manual
Boot system with lid open. 'ectool switches' should show lid open.
Use 'dut-control goog_rec_mode:on'. 'ectool switches should show
dedicated recovery signal on.'
Use 'dut-control goog_rec_mode:off'. 'ectool switches should show
dedicated recovery signal off.'
Disable write protect via screw. 'ectool switches' should show WP
signal disabled.
Boot system in recovery mode (power+esc+reload). Should show 0x09.
Change-Id: I0434427c4b5f8c07c02a8714618f7eb101b86fed
The STM32L15xx monitor does not implement the mass erase,
so we need to use the page erase feature and loop.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=on Discovery, fill the flash with a pattern, then erase, write a
firmware image, read back the content of the flash, run the firmware.
Change-Id: Icf0e9812a5d491fea78472a0203ddbbc3e813b2f
Note that this only handles lid and power button; see
crosbug.com/p/8325 for write protect.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8185
TEST=manual
1. Check state with lid open
localhost ~ # ectool switches
Current switches: 0x01
Lid switch: OPEN
Power button: UP
Write protect: ENABLED
2. Press power button
localhost ~ # ectool switches
Current switches: 0x03
Lid switch: OPEN
Power button: DOWN
Write protect: ENABLED
3. Release power button and close lid
localhost ~ # ectool switches
Current switches: 0x00
Lid switch: CLOSED
Power button: UP
Write protect: ENABLED
Change-Id: I25f2fa3dfeac004dde9b10a4243ee235875f1b6e
Useful when debugging to determine if a user has an official build or
not, particularly early in the devel process where we're handing
builds to everyone. Particularly useful for proto1, since not all
those systems will be case-open servo-attached.
Also move get-version LPC command into system.c, where it's closer to
the system functions it calls (matches what we do for other host
commands).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: Idb0f6edf31ca00e32f083be0b0d3f23ab79c5fba
