Note that this is a big security hole and should be removed after we
complete the EC autoupdate mechanism and vboot code.
To full update EC firmware on proto 1.0, we need a manual way to switch
EC running on RO/RW. This CL implements the LPC command.
BUG=chrome-os-partner:8415
TEST=on proto 0.5.
ectool reboot_ec RW_A # EC boots to RW A
ectool reboot_ec RO # EC boots to RO
Change-Id: Ibf050328bc4e3d2c6d72bfc478d6334f11f0eb46
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8325
TEST=manual
Boot system with lid open. 'ectool switches' should show lid open.
Use 'dut-control goog_rec_mode:on'. 'ectool switches should show
dedicated recovery signal on.'
Use 'dut-control goog_rec_mode:off'. 'ectool switches should show
dedicated recovery signal off.'
Disable write protect via screw. 'ectool switches' should show WP
signal disabled.
Boot system in recovery mode (power+esc+reload). Should show 0x09.
Change-Id: I0434427c4b5f8c07c02a8714618f7eb101b86fed
Note that this only handles lid and power button; see
crosbug.com/p/8325 for write protect.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8185
TEST=manual
1. Check state with lid open
localhost ~ # ectool switches
Current switches: 0x01
Lid switch: OPEN
Power button: UP
Write protect: ENABLED
2. Press power button
localhost ~ # ectool switches
Current switches: 0x03
Lid switch: OPEN
Power button: DOWN
Write protect: ENABLED
3. Release power button and close lid
localhost ~ # ectool switches
Current switches: 0x00
Lid switch: CLOSED
Power button: UP
Write protect: ENABLED
Change-Id: I25f2fa3dfeac004dde9b10a4243ee235875f1b6e
Useful when debugging to determine if a user has an official build or
not, particularly early in the devel process where we're handing
builds to everyone. Particularly useful for proto1, since not all
those systems will be case-open servo-attached.
Also move get-version LPC command into system.c, where it's closer to
the system functions it calls (matches what we do for other host
commands).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: Idb0f6edf31ca00e32f083be0b0d3f23ab79c5fba
The list of if()'s was getting long and obnoxious.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=run a few ectool commands and see that they still work
Change-Id: Ie292b50a27e98ca2c48f13e1141faf273efdd94b
'ectool temps 0' always have non-zero return code.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8294
TEST="ectool temps 0 && echo 'test'" gives 'test' on screen.
Change-Id: I3a4eff513638c25ec68e24968ce9d1022b4c1281
This is necessary to support SCI/SMI events.
Note that this breaks compatibility with previous ectool builds - and
probably also breaks flashrom support.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8253
TEST='ectool hello' and 'ectool flashinfo' still work
and 'ectool usbchargemode 3 1' fails with error 2
Change-Id: If39e5b6e7cdcec1b5ec765594e8492925b430b10
Implement LPC commands and ectool commands to
1. Set/get threshold temperature values.
2. Toggle on/off automatic fan speed control.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8251
TEST=Manual test
Change-Id: Ia4282a6fa47a838aed26540f33c1eb7acc92ef0e
Add a task to update fan speed in LPC mapped memory once per second.
Also added read_mapped_mem16 and read_mapped_mem32.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8183
TEST="ectool pwmgetfanrpm" shows same result as "faninfo" from ec
console.
Change-Id: Ibc536acd39f836ffcad0bfa7c9c14e730220bd49
Add a task to update temperature values in LPC mapped value space every
second. Also modify ectool to read directly from LPC mapped space.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8065
TEST="ectool temps" gives same result as "temps" from ec console.
Change-Id: Idcdef8d822724f9bd22d7e819c717cba5af5eb77
Add a LPC command to control USB charging mode. Also add the command to
ectool.
BUG=chrome-os-partner:7476
TEST=Manually test on link proto-0.
Change-Id: Ica87d0a690bc86e28844bd695f31641398b21939
Signed-off-by: Vic Yang <victoryang@chromium.org>
This will allow more efficient access to EC-provided data (temperature,
fan, battery) by the main processor.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7857
TEST='ectool hello' from link main processor should still work
Change-Id: I2dc683f3441b34de9fb4debf772e386b9fdcfa82
Refactor board/chip-specific code into corresponding directories.
Add support of the four I2C temp sensor in Link.
Use table lookup to handle different types of temperature sensors.
BUG=chrome-os-partner:7527
TEST=Correctly read EC internal temperature on bds.
Compile for link succeeded.
Change-Id: I694cfa54e1545798d877fafdf18c5585ab5f03e2
Add an option to read temperature from only specified temperature
sensor. With this we can prevent ectool returning error if we already
know a sensor is not connected and do not want ectool to read it.
BUG=none
TEST=ectool temps; ectool temps temp_sensor_ec_internal
Change-Id: I221f1e3390d17f4a3ae99f58eb701a99c7b566b9
Add LPC host command to get and set fan speed.
BUG=chrome-os-partner:7313
TEST=Connect a fan and manually test fan actual speed matches target
speed.
Change-Id: I4b6a711a1b8cca0dbd1c1936fe4f0f15240d3453
Add a LPC host command to read temperature sensor value with given
sensor id.
Add ectool command to read temperature sensor value through LPC.
BUG=chrome-os-partner:7329
TEST=Manual check the reading received is the same as value printed by
console command.
Change-Id: Id3386774435be6c3ae010a143f4fa894568efdb8
