Disable most of the pd console command to save space. The command
can still be used with subcommands "state" and "dump" to get state
information and change debug level.
BUG=none
BRANCH=none
TEST=make buildall with CONFIG_CMD_PD defined and undefined. Also
undefined the config option and loaded onto samus and verified that
the pd 0 state command still works.
Change-Id: Ie41bad53122a1e2a9ef4bad6423b9cdc85f53742
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229420
Reviewed-by: Vic Yang <victoryang@chromium.org>
Added hibernate wakeup pin(EC_WAKE) that covers both AC_PRESENT and LID_OPEN. It pulses a
rising edge when either of them have a rising edge.
The power button was also inverted to handle hibernation better, now it's low
except when pressed it temporarly goes high.
BRANCH=None
BUG=chrome-os-partner:33269 chrome-os-partner:32782
TEST=make BOARD=jerry
Try hibernating, all wakeup sources should work, it shouldn't stay hibernated.
All signals(AC, lid, power button) should work equally well as in pinky.
Change-Id: I894135bdfd5600919296f7510dc9cd1acd567ddc
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/228763
This enables forwarding of the local PD/EC console
over debug USB. It gates the console functionality
based on the CCD mode that is set.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable partial CCD mode on ryu and verify that it is
enumerated by the host correctly, but doesn't respond
to console input, and doesn't generate output.
Enable full CCD mode on ryu and verify that it is
enumerated and that the console works as expected.
Verify that the console still works by default on the
discovery-stm32f072 board.
Change-Id: I0325ce9689486c41387d6075330be1d7d42f1d42
Reviewed-on: https://chromium-review.googlesource.com/229342
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This provides a framework for additional work. It
exposes an API (ccd_set_mode) that can be used by the
PD code to enable Case Closed Debug. Enabling CCD will
result in the USB 2.0 lines on Ryu (proto 2) to be
disconnected from the AP and for the USB peripheral to
be enabled and connected to the host. The result is
an enumerated device with no interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable CCD ryu_p2 and verify that it is enumerated
by the host correctly. This requires a reworked
Ryu (proto 2 with pullup).
Change-Id: I1fbecdd5f94a61519cfc18c5e087892c6bd77fde
Reviewed-on: https://chromium-review.googlesource.com/229139
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Previously enabling USB would automatically (using an
init hook) initialize the USB peripheral. This would
take over the GPIO lines assigned to the USB module.
This is not OK on Ryu for Case Closed Debug because it
interferes with the AP's access to the USB 2.0 lines
even when not in Case Close Debug mode.
This change adds a configuration option to inhibit this
default initialization of the USB peripheral. It also
renames the existing CONFIG_USB_INHIBIT to
CONFIG_USB_INHIBIT_CONNECT now that there are two
possible inhibitions.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable console on ryu_p2 and discovery-stm32f072 board
Verify that it works on both
Change-Id: I6734357131b4356e3d4164349d6c74deac196ce5
Reviewed-on: https://chromium-review.googlesource.com/229138
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
When a PD charger is detected, gets its max charge capability, but
initially negotiate for its minimum charge mode. If we later determine
that the port will be the one active charge port, re-negotiate for the
max charge capability.
BUG=chrome-os-partner:32003
TEST=Manual on Samus. Plug in Zinger, verify that current limit is
initially set to 500 mA, then switches to 3000 mA shortly after. Plug in
two Zingers, verify that one provides 3000 mA current while the other
negotiates to 500 mA. Verify that the 500 mA charger bumps up to a high
current once becoming active.
BRANCH=Samus
Change-Id: Ifa562b72d763642fc8bd62bc7f5aaa4eda1ef950
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225922
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This simply renames ryu to ryu_p1, and ryu_p2 to ryu. 'ryu_p1' will be
kept for a while and will be decommisioned when most developers make
switch to the new boards.
BRANCH=None
BUG=chrome-os-partner:33583
TEST=Build ryu and boot on P2 board.
Change-Id: Ief61c64c6aefdaeae76ac7b86e0ea28131810aa1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This can save 80mW in S3 when the lid is open.
BUG=chrome-os-partner:33057
BRANCH=samus
TEST=boot on samus, go to suspend with powerd_dbus_suspend and ensure
that the touchscreen is in reset.
Change-Id: I63c24ad5a8f8cb389ee0d6139edbbb46dec5423b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229106
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The next board revision will reset the ID to zero, so we
can no longer rely on the old versions for workarounds.
However those boards no longer work without modification due
to GPIO changes anyway so we can just remove the old code
and since there are no more workarounds left remove the board
version enum since it is no longer used.
BUG=chrome-os-partner:32895
BRANCH=samus
TEST=build and boot on samus EVT2
Change-Id: I3f76cda6b533fe195a743baa7981a0e67d371313
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229003
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Once a mode is entered object position (OPOS ... AKA alternate mode) field in
the VDM header should always track that mode.
CL fixes DP status & config messages which did not add the correct OPOS. In
fixing I mapped to the UFPs function pd_alt_mode which for the DFP did require
the addition of port parameter. Finally I cleaned up code to use this function
throughout common policy layer where previously I'd just accessed the pe
structure directly.
BRANCH=samus_pd
BUG=none
TEST=manual, compiles, insert hoho/dingdong into samus and see OPOS=1 from samus
for enter, dp_config, dp_status SVDMs
Change-Id: I66448c3386be01bae58768632da216aff41a9a30
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/228130
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Add delay for power supply startup time before sending source
capabilities packets.
BUG=none
BRANCH=samus
TEST=load on samus, plug in C to A receptacle adapter, see that
VBUS enabled before source cap packet sent.
Change-Id: If3b595e1671d089e859693b420841a639fdb146b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227423
When PD traffic is seen on CC1 / CC2, turn on respectively the green LED
and the red LED.
When the samples are properly exported through USB without overrun, the
blue LED is lightly blinking.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=plug a Zinger into a power sink through the Twinkie and see it
blinking in a different color depending on the plug polarity.
Change-Id: Icde9de5c807045d4df725e702690246367bcfd1d
Reviewed-on: https://chromium-review.googlesource.com/226590
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
For request message, add the operational and max current for each
board. If the requested power is less than the operational power
required, then set mismatch bit.
BUG=none
BRANCH=samus
TEST=make buildall. load onto samus, plug in zinger and see
that request 20V, operational current 3000mA and max
current of 3000mA.
Change-Id: I4df45d88b7e060f66ff5b806f6fe30803f1afcf7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227393
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Update GPIOs to reflect changes in Plankton v3. The default values are
set so that case closed debugging is disabled. Also, rename CABLE_FLIP
to MUX_FLIP to match the schematic. (Plus that MUX_FLIP is a more
suitable name for what it does.)
This change be functionally compatible with Plankton v2, except that the
change on PA7 causes a 0.33mA leakage current on Plankton v2, which
should not be a problem.
BRANCH=None
BUG=None
TEST=Compile only
Change-Id: I50c56a1c583015d3624ec9f5901ed477d07233f4
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/227980
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Remove redundant 5V source PDOs in source cap packet. We only
need one 5V advertisement with the maximum current that we can
provide.
BUG=none
BRANCH=samus
TEST=make buildall
Change-Id: I94a01813787eb92fafbf600dcbbc8a2f0aa69e2b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227392
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Add support for PR_SWAP command as per PD specification.
BUG=chrome-os-partner:28343
BRANCH=samus
TEST=test by connecting two samus' and running 'pd 1 swap power'
from console. verified that both sides switch power roles by
observing console output. also tested against third party
devices.
Change-Id: I0e8738b544de9f9a4348250630e67d0fefb4486d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225559
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Update source and sink capacity tables for all PD boards. As
per spec, the first entry in both tables must be a fixed power
supply PDO. Added dual-role capable bit to fixed PDOs and added
new state variable to keep track of that information for each
port. This will be used to make decisions in charge manager and
to pass up via host commands.
BUG=chrome-os-partner:28869
BRANCH=samus
TEST=make buildall. use "pd 1 status" to check
if part partner is dual-role capable and check zinger is not,
C to A receptable adapter is not, and another samus is.
Change-Id: I49f034a372bc145cd524577c17ca210eec4c1013
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227170
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Modules that are enabled are listed below:
- Power Sequencing
- Keyboard Scan and Protocol
- LPC to support Keyboard
- Power Button Task
ec.spi.bin has to be generated manualy using
pack_ec.py
BUG=None
BRANCH=None
TEST=Tested on Stargo-Proto board
Change-Id: Ic5d504c3d6e9c7c5f3482fb7e9e37800b6274824
Signed-off-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/226303
Reviewed-by: Vic Yang <victoryang@chromium.org>
The fans on samus have a recommended minimum duty cycle of 20%
while running, but 30% in order to start. We've been using the
EC's built-in fan controller for the start requirement, but it
has a minimum fast-start duty cycle of 50%. It turns out that
that speed is noticeably noisy.
This change handles the startup with logic in the EC instead, so
that the fan only tries to spin at 30% initially (or if it drops
too much below the minimum turning speed).
BUG=chrome-os-partner:33429
BRANCH=ToT,samus
TEST=make buildall -j
Boot the system, let it idle with the browser windows closed, the
browse a bit, then idle. Listen for changes to the fans.
Before, I could hear the fans kick in and out as the AP load
changed. Now it's much quieter.
Change-Id: Id35215520c064eb6843686ec8bb5f3618dac6cf6
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227658
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously the version string was special cased in the USB stack
because the build system prevented the inclusion of ec_version.h in
any file other than common/version.c. This lead to common/version.c
being the only place that the USB version string could be computed
and thus the special case of filling in the version string descriptor
at run time. This made the USB stack more complex, and lead to the
common/version.c file including usb.h, which is actually STM32
specific.
Now, the portion of ec_version.h that is deterministic is only
updated when something in the tree actually changes (by way of a
conditional in the makefile), and ec_version.h no longer has to
depend on all object files (other than the special version.o).
This allows anyone to include ec_version.h as needed. In particular,
each board that wants to define a USB version string can directly
include ec_version.h and do so.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
touch files and verify rebuilds happen correctly
Change-Id: Ic84d0b9da90f82ebb4630fb550ec841071e25a49
Reviewed-on: https://chromium-review.googlesource.com/227211
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
The serial console works. Nothing else is implemented yet.
BUG=none
BRANCH=ToT
TEST=make buildall -j
To build,
make BOARD=cr50 hex
Testing the result requires a development board. I have one. It
works with HW revision m3.dist_20140918_094011
Change-Id: I718d93572d315d13e96ef6f296c3c2796e928e66
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226268
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for more host events and add a host command for the host
to use to get which host events have fired. The EC only uses one
real host command to notify the AP whenever the PD MCU needs attention
so the EC_CMD_PD_HOST_EVENT_STATUS host command can be used to
differentiate the possible triggers for the host event.
Current events include: PD remote device needs update, type-C power info
changed, and PD identity response received.
Added host event for power info change, which fires whenever a charger
or device is plugged into a type-C port.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=tested on samus by connected various peripherals to type-C ports
and verifying on EC console that a host event is sent.
Change-Id: Ibfc2cafe5826a0ab41aee96a68fdb561c0a2b4ab
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225841
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Per table 6-24 of USB PD spec an alternate mode adapter (AMA) should
include both product & AMA VDOs.
BRANCH=samus
BUG=chrome-os-partner:31192,chrome-os-partner:31193
TEST=manual,
Connect hoho/dingdong to fpie/samus and see product VDO proceed the
AMA VDO in DFP_U console output:
Product VDO -----------------------------v
|------|
SVDM/5 [1] ff008041 340018d1 00000000 50100001 1100000b
Note, hoho's PID == 0x5010
And dingdong (0x5011)
SVDM/5 [1] ff008041 340018d1 00000000 50110001 1100000b
Also see bcdDevice field in descriptor match above data.
$ lsusb -v -d 18d1: | egrep -i "idproduct|bcddev"
idProduct 0x5011
bcdDevice 0.01
Change-Id: I4d898816a45c68c7ff75a54fd348fc11be408ae0
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226125
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
USB Billboard class can be used to advertise an alternate mode capable
device that hasn't entered a mode. Additionally it can remain after
mode entry providing its Billboard capabilities descriptor is
updated.
This CL postpones enumeration which previously occurred after boot
until tAMETimeout has passed and alternate mode has NOT been entered.
Future CL could choose to also (re)enumerate with mode capabilities
although this is not required by the USB PD specification.
BRANCH=none
BUG=chrome-os-partner:31192,chrome-os-partner:31193
TEST=manual,
With DFP_U which does not enter mode see Billboard class enumerate
else it does not.
Change-Id: I59a0815cd0ea551ba9a878907c0184df4ba9480c
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224663
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:31192,chrome-os-partner:31193
TEST=manual
Attach hoho/dingdong to samus and see AMA VDO bits <2:0> set to 0x3
during the discover identity response.
AMA VDO
|------|
SVDM/4 [1] ff008041 340018d1 00000000 1100000b
Change-Id: I1e2459b87cceca88ab3ae09440b689041ae03c7c
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226101
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Properly set the comparator output when using CC2.
Also add some basic LED color to display the current power contract when
we are a sink :
- green : 5V
- red : 20V
- blue : other voltage
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=plug to Zinger in each plug direction and see green then red LED.
type "pd 0 dev 12" and see the blue LED.
Change-Id: I4eb4339568eda5871c7f3df75bedebd97238e941
Reviewed-on: https://chromium-review.googlesource.com/226385
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Get type-c port power info including power role, charger type,
and charging info. Also added host command to get number of type-c
ports.
Also adds new charging suppliers for pericom identified chargers
including DCP, CDP, SDP, proprietary, and other chargers. Priority
of these for charging is set in samus board file.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=run 'ectool --name=cros_pd usbpdpower' and verify correct
status with minimuffin, zinger, and type-C to type-A adapter.
Change-Id: I1dabbe7de4185a23df5684a5ea9a2d944f1f6ff5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223523
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Now that the problem with UART in STOP mode is fixed, let's enable low
power idle for Ryu P2 boards.
BRANCH=None
BUG=chrome-os-partner:33219
TEST=Shut down the AP and unplug AC power. Check the EC goes into
deep-sleep by 'idlestat'.
TEST=Power up the AP and check the EC stays awake.
Change-Id: Ib8ad3763407315ec0f95551fa0fdd258a060e113
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226312
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Split motion_sense.c.
Translate the accel data in the Android coordinate right away.
BUG=chrome-os-partner:32002
BRANCH=ToT
TEST=On samus, check lid angle are still correct.
Change-Id: If743e25245dc1ce4cdacb8a4d5af22616c4a79e4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225486
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move gesture to common directory, 1st step to be reused by
other board.
Cleanup motion_sense shutdown path.
BUG=chrome-os-partner:33102
TEST=Double tap still works on Samus
BRANCH=ToT
Change-Id: I0a3b38c4a7dbe95c27dcdebff04c1176aaf932d1
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225235
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
These names can be used to uniquely identify an interface
as being a console forwarded from the AP, or the EC's
console or some other console. This makes it possible to
connect to the correct console from servo without knowing
what board is attached. These strings could also be used
by udev rules to create appropriate symlinks.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I1abd36f952782a03606b09485917be8e154534ce
Reviewed-on: https://chromium-review.googlesource.com/225950
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously the USB console code used two separate
bidirectional endpoints. Using the STM32 USB perihperals
endpoints in this manner means that there are only 8 total
endpoints available. But the STM32 USB peripheral allows
for a single endpoint number to be used for both IN and
OUT transactions, and while this (re-using an endpoint
number for both IN and OUT endpoints) appears to be not
compliant with the letter of the law with respect to the
USB spec, it is supported by USB stacks, and is used in a
number of USB devices.
So this change makes the USB console driver share a single
endpoint number between the IN and OUT bulk endpoints used
to implement the console.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable USB console on discovery board and manually test.
Change-Id: I511e56de2162a6c04ddba80d26b37b4f0cd993fd
Reviewed-on: https://chromium-review.googlesource.com/225868
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Update the sniffer code to sample both CC lines at the same time.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28337
TEST=make BOARD=twinkie
do an on a sample pattern from the function generator on both channels
and verify that the waveform looks good.
Change-Id: I30c607591775531e432e757f61209733804b55e5
Reviewed-on: https://chromium-review.googlesource.com/224583
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@google.com>
Tested-by: Vincent Palatin <vpalatin@google.com>
Send the current limit chosen by charge manager to the EC so
that it can set the current limit appropriately. Note, before
this change, only the PD negotiated current limit was sent to
EC.
BUG=none
BRANCH=samus
TEST=use a non-PD type-C charger and verify current limit gets
set appropriately on EC.
Change-Id: Ic4bfce052ec8150cad07d35e2cb2fcbfd3d3e6c8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225667
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow the list of charge suppliers and port selection priority to be
specified at the board level.
BUG=chrome-os-partner:32650
TEST=Manual on samus_pd. Plug + unplug PD and BC1.2 chargers, verify
that PD is always preferred and higher power port / supplier is always
selected.
BRANCH=Samus
Change-Id: Ic867a40120c809111bf76bf290ed6f204eab1168
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225292
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Added return parameter to enter mode functions. For DP mode on
samus and fruitpie, only send enter mode if device is a DP
sink (DFP_U).
BUG=none
BRANCH=samus
TEST=make buildall. tested a simpler version of this with a
third-party DFP_D capable device and verified we don't send
enter mode.
Change-Id: I5caf008b7b3711232aeb1a1012cde2022584109b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225288
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Once alternate mode is entered the DFP will make an initial status
request to the UFP. Future status changes on the UFP are then sent to
the DFP via the attention command. This VDM consists of the VDM
header plus another VDO containing mode specific information.
CL adds ability of DFP to consume the attention VDMs status message
and in the case of DisplayPort SID toggle the necessary HPD gpio
accordingly.
BRANCH=samus
BUG=chrome-os-partner:30645
TEST=manual, for DFP w/ HPD over CC see HPD toggle correctly without
manually driving it providing cable connected when AMA is inserted.
Change-Id: Ifef60b5d0170cbcc1b518e3b13e84bac99a17e32
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224769
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When we are a UFP with a plug, for the supported DisplayPort pinout,
we need to state which DFP pin configuration we support.
Update the field used for declaring pin configuration in our display
dongles.
HoHo is a protocol converter : update the pin assignment to C.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:30645
TEST=none
Change-Id: Ie5484f228bd39666c6b01055bd11f68eb9acad88
Reviewed-on: https://chromium-review.googlesource.com/225231
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
A USB type-C to DisplayPort dongle can support either DPv1.3 or
USB Gen 2 signaling.
Our dongles need to advertise that they support DPv1.3 and only this.
Our DFP needs to request DPv1.3 signaling.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:30645
TEST=Plug a type-C to DP dongle from another vendor to Samus and see a
display output.
Change-Id: Ie0ac16b675e86f635220a954a2c03442777cc527
Reviewed-on: https://chromium-review.googlesource.com/225250
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
