This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The original algorithm is given in the TMP006 User's Guide
(SBOU107.pdf). The algorithm we previously implemented is that,
plus some additional and completely undocumented massaging of the
Tdie and Vobj registers. The original meaning of that hack is now
lost in the mists of time, thanks to our email retention policy.
This CL introduces a new algorithm variant, but at least this
time the details are in the bug report. It's essentially the same
as the User's Guide algorithm, except that we apply one-stage FIR
filters to the Tdie input and the Tobj output.
There are five new parameters: d0, d1, ds, e0, e1. Refer to
tmp006_read_object_temp_k() in ec/driver/temp_sensor/tmp006.c to
see how these new parameters are applied.
CAUTION: The tmp006 sensor algorithm is mostly math and magic
numbers. The spreadsheet attached to the bug report has six
sheets with wildly varying values for those parameters. Since the
correct parameter values haven't yet been determined for Samus,
all I can be sure of with this CL is that it seems to work and
isn't any worse than the old one.
Oh, and note that the EC's 't6cal' console command has been
disabled until/unless we add support for floating point IO. Use
ectool from the host to get and set the params instead.
BUG=chrome-os-partner:32260
BRANCH=ToT,Samus
TEST=manual
After booting, look at the sensor values using ectool:
localhost ~ # ectool temps all
0: 312
1: 314
2: 313
Sensor 3 not calibrated
4: 311
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 306
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
Sensor 13 not calibrated
localhost ~ #
localhost ~ # ectool tempsinfo all
0: 0 PECI
1: 1 ECInternal
2: 1 I2C-Charger-Die
3: 2 I2C-Charger-Object
4: 1 I2C-CPU-Die
5: 2 I2C-CPU-Object
6: 1 I2C-Left C-Die
7: 2 I2C-Left C-Object
8: 1 I2C-Right C-Die
9: 2 I2C-Right C-Object
10: 1 I2C-Right D-Die
11: 2 I2C-Right D-Object
12: 1 I2C-Left D-Die
13: 2 I2C-Left D-Object
EC result 2 (ERROR)
...
localhost ~ #
There are six tmp006 object temps that need calibrating. The
index used for the calibration is for the tmp006 objects, not the
3,5,7,.. numbers reported for all temp sensors. See the current
values with tmp006cal:
localhost ~ # /tmp/ectool tmp006cal 5
algorithm: 1
params:
s0 0.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -2.940000e-05
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
If the s0 param is zero, this sensor is uncalibrated. The params
are entered in the order in which they're displayed You can
change any or all of the parameters. Skip the ones you don't want
to update by specifying '-' for its position. (Note: throw in an
extra '--' first so that ectool doesn't think that negative
numbers are command options).
For example, to change s0 and b0:
localhost ~ # ectool -- tmp006cal 5 1.0 - - -3.0
localhost ~ #
localhost ~ # ectool tmp006cal 5
algorithm: 1
params:
s0 1.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -3.000000e+00
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
Now sensor 13 (tmp006 object index 5) is calibrated:
localhost ~ # ectool temps all
0: 310
1: 315
2: 313
Sensor 3 not calibrated
4: 310
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 307
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
13: 313
Change-Id: I61b5da486f5e053a028c533ca9e00b9a82a91615
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224409
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is needed to calibrate the tmp006 remote sensor values.
BUG=chrome-os-partner:26581
BRANCH=none
TEST='ectool tmp006raw N' works for N=0,1,2,3
And fails with invalid param for N=4.
Data matches result of tmp006 ec console command.
Change-Id: I04ec093c7727b55caca7d02baaf373d1ff234731
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189207
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This make minor syntactic changes and renames some camel-cased symbols
to keep checkpatch from complaining. The goal is to reduce the
temptation to use 'repo upload --no-verify'.
This is a big furball of find/replace, but no functional changes.
BUG=chromium:322144
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I0269b7dd95836ef9a6e33f88c003ab0f24f842a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180495
BUG=None
BRANCH=None
TEST=Manual. Run the following console commands:
g781 - verify temps and status look sane.
temps - verify local and remote values for the 781 are listed
g781 settemp 0x05 80 - verify local high alarm set to 80C
g781 setbyte 0x09 0x80 - verify config register is 1000 0000
Change-Id: Ia437647fd052295dfd8901c2ef241ff69c0d950e
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179152
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows local and remote temp values to be added
to a board's list of temp sensors. It also adds a
'tmp432' EC console command to query temps
and set alert thresholds. Fractional degrees are not
supported. DPTF support is not addressed.
BUG=chrome-os-partner:23985
BRANCH=none
TEST=Add tmp432 support to a board with the sensor
then run the 'tmp432' and 'temps' EC console commands.
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: Ifee47cf4d4cf5eedef9ef2bfa2149f183f1d7a7b
Reviewed-on: https://chromium-review.googlesource.com/178688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>
Device-specific headers belong in driver/ or chip/. The include/
directory should be for common interfaces.
Code should not normally need to include driver-specific headers. If
it does, it should use the full relative path from the EC project root
(for example, drivers/charger/bq24715.h).
Change-Id: Id23db37a431e2d802a74ec601db6f69b613352ba
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173746
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The common/ subdir was getting cluttered. Move drivers for external
components to a new driver/ tree, and move what used to be called
chipset_*.c to a new power/ directory.
This does not move/rename header files or CONFIG options. That will
be done in subsequent steps, since moving and modifying .c files in
the same CL is harder to review.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I67a3003dc8564783a320335cf0e9620a21982d5e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173601
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
