Add a CONFIG_CHIPSET_X86 option that determines if
chipset_x86_common.o is built.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=built bolt and link. All other boards should be covered.
Change-Id: I980a8fc68a31162b920429e695631909c5f6a4db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
No functional changes, just renaming config options.
Remove README, now that all options described in it have been moved to
config.h, and the remaining information is out of date. (Yes, we
should have a README which describes the organization of the EC
repository, but that's a matter for another CL; this one's about
cleaning up config options.)
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Iafefbe94369f1217c698f11d358bc0ecac2bdfde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63145
Reviewed-by: Vic Yang <victoryang@chromium.org>
All of these were defined on all but a few platforms, and those
explicitly #undef them. So define them as enabled by default in
config.h so the board.h files are cleaner.
No functional changes; just rearranging/renaming config constants.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; FEATURES=test emerge-falco chromeos-ec
Change-Id: I1201a1472ae29641e9e219c2a0347691ca64cd28
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63102
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
All boards which use the PMU must provide pmu_board_init(). This was
already true - except that Daisy's pmu_board_init() was implemented as
part of pmu_init() instead of its code living in board.c; I've moved
the code there now.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I85ad06dc3b6287ad917fe13acf83182f24a8f23d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62906
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I0b0d3cdce535d90ce437e82e96346fc3ca9be7b0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62673
These are now described in config.h. The various BQ chargers now also
use a consistent naming for their sense resistor options.
No functional changes, just renaming, and removal of obsolete
never-defined configs.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie274546fe45f5ffc6fd0f26096c4622805baf8a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62540
The version struct and EC_CMD_GET_VERSION assume 32-character version
strings. But if the git tree is dirty and the board name is long, the
version string overflows that limit.
This change truncates what's stored in the version string to fit.
The build info still contains the full version string, as it did before.
BUG=chrome-os-partner:21156
BRANCH=none
TEST=build BOARD=mccroskey with a dirty tree; it should build.
Then cat build/mccroskey/ec_version.h to see CROS_EC_VERSION32 has
truncated the version string. Then build a platform of your choice
and type 'version' to see that the version string and build info is
still reported correctly.
Change-Id: Ie71b8efd99a83315f8b4d5ad10c51e48781b12f4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62649
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add an enum for the number of flash regions so we can keep track of all
the possible regions.
(This is used in U-Boot which wants to declare an array of all possible
regions.)
BUG=chromium:244019
BRANCH=none
TEST=manual
Build EC for pit.
Change-Id: I494d857f1388dcc5c64b1cd580cf0084bdef0212
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62701
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:20863
BRANCH=falco,peppy,slippy,wolf
TEST=Manual. On Peppy, there should no longer be "Charging
Voltage" messages every second on the EC console. On other platforms
verify that V_Batt reported by the 'charger' command is divisible
by 16.
Change-Id: Idd775a1d8033ff3405d10919e1e15ddddebc6c23
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62699
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:20889
BRANCH=peppy
TEST=Power device without battery. It should boot with no 30
second delay. The battery LED blinks orange indicating a
battery error.
Change-Id: Iea4f5644ae223b60dc8058dc52e06405e275c001
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61820
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Marc Jones <marc.jones@se-eng.com>
Expands and renames ectool 'chargeforceidle' command to
'chargecontrol'. Board-specific calls are needed to enable and
disable the discharge while on AC power state.
BUG=chrome-os-partner:20506
BRANCH=falco,peppy
TEST=Run ectool chargecontrol command with each option (normal,
idle, discharge) on Falco and Peppy. Verifiy battery is discharging
in discharge mode via EC console 'battery' command.
Change-Id: I7ac2b18b4f143bf6abc1e0bb878ad21a99f52100
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60689
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds two new fields: the ideal write size for best EC flashing
performance (e.g., page mode instead of word mode), and a flags field
with a flag to indicate whether the EC erases its bits to 0 or 1.
The EC still supports the old version 0 command, since u-boot and
flashrom expect that to work.
BUG=chrome-os-partner:20973
BRANCH=(all haswell); this will speed up flashing and software sync
TEST=ectool flashinfo
1. old EC, new ectool -> only reports version 0 info
2. new EC, old ectool -> only reports version 0 info
3. new EC, new ectool -> reports new fields
Change-Id: I484327fe22a58d2b69d7f6ac767b2d3e81b3e0b7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62378
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Power button logic is common across all platforms and is not
LM4-specific, so move it to its own module. Switch.c will eventually
be moving to common/ and will common across all platforms (not just
x86), and splitting out the x86 power button logic is needed before
that too.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
1) power on system with both lid and power button.
2) power+refresh -> reboots
3) power+refresh+esc -> recovery mode
4) power+refresh+downarrow -> reboots, AP stays off
5) toggling recovery GPIO via servo should generate SW debug output
showing bit 0x10 toggling
Change-Id: I07714e2c035dceece66f90407983397d2697e7d5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61780
The configure_kblight_gpios() funciton was specific to
the link board. Therefore, move the function to be defined
within the board-specific file.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=Built. Tested similar change on bolt.
Change-Id: Ib5847130450024c50d6526d2c1a64d67ab501637
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62209
This file will soon contain the exhaustive list of all CONFIG defines
and their descriptions.
Chip-level configs are renamed to config_chip.h to avoid naming
conflicts.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I9e94146f5b4c016894bd3ae3d371c4b9f3f69afe
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62122
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Both of these are included via common.h, which is in turn included by
most other header files. Directly including board.h or config.h is
redundant and discouraged.
No code changes, just removing #includes.
This is in preparation for making a top-level config.h file, but that
change will be easier to review if it doesn't touch as many files.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I204bcebe5607c6e6808821eb071cfc31d2a93a7c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62121
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
These were briefly used on link, and are not used by any other
platform. The values for those platforms are almost certainly wrong,
and incorrect information is worse than no information.
This does not remove reading the stuffing resistors - it just removes
the assumption that they map to PROTO1 and EVT.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=compile all platforms
Change-Id: I2ba19fd52660559bfd1d8e3b8a9949e9b8abbddf
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61929
We implemented a fancy state machine for link to try and feed
almost-dead batteries smaller amounts of current than the charger
could normally supply, by dithering down the voltage to less than was
requested. It's a lot simpler just to give the battery the smallest
non-zero amount of current we can give it at the voltage it asks for.
Remove the precharge code, since we won't use it on any future
platform and link has already branched.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=find a really dead batery and try to charge it, or do what I did
and just hack the battery module to lie about the requested values,
and see that it always gets the minimum current step at the requested
voltage.
Change-Id: I30bcb62bbe215abafb3a98c52e2afed3b74ead1a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61789
Chipset control of wireless power uses the new API instead of overriding
the wireless power itself.
Refactor board-specific support for it to just a few config #defines
instead of board-specific functions. This makes some assumptions
about the polarity of the enable signals. Not making those
assumptions would require defining an array of structs or some other
heavier-weight board-specific info. Since the assumptions hold for
all current boards, let's make them now because this is a step in the
right direction, and reserve doing something more general until we
actually have a use case for it (so we build in just the flexibility
we need).
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; see that link wifi turns on at boot and off at
shutdown (verify via 'gpioget' from EC console)
Change-Id: Ic036e76158198d2d5e3dd244c3c7b9b1e8d62982
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61608
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This code is not LM4-specific, it's x86-specific. So it doesn't
belong in chip/lm4. Put it in its own module rather than leaving it
in switch.c, since some x86 systems may need the power button state
machine but not the backlight-enable passthru.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=Quickly run a magnet over the lid switch; the backlight goes off and then
back on.
Change-Id: I72f7139b73f91539dcfbe6b5cb6d56587ab66fde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61595
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This checks the functionality of thermal engine related host and
console commands.
BUG=chrome-os-partner:19236
TEST=Pass all tests.
BRANCH=None
Change-Id: I604ed3bfed3549b2573fac65da83450acd3f2797
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60964
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This moves most of the code into a common module, leaving only the
board-specific GPIOs (now listed in a struct in board.c) and the
chipset-specific state machine with multiple copies.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=boot link; verify suspend and resume work; shut back down and see
it go to G3 after 10 sec.
Change-Id: Iafa8ba55a4870bb0119ff4161a1a9054fcc7955f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60949
VFET2 is only used by early stage boards. Let's drop it now.
Also, disable power output when power good for VFET is not set. This
essentially adds retry for video power output.
BUG=chrome-os-partner:18186
TEST=Boot and test video output.
BRANCH=Spring
Original-Change-Id: I1937522a6a523a4f5dbeb9882518ca6e37655bea
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60852
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit e82589e073c5a863797fa87ecaa1dfafb1a9228d)
Change-Id: Ib043f952e699eb99b373da205379f56230887f6a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61396
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The struct was changed in commit 74c34bbad, but the struct version was
left as 1. We need to uprev this so the data returned by host command is
useful.
BUG=chrome-os-partner:16901 chrome-os-partner:20548
TEST='ectool panicinfo' with new and old struct. Compare output with
output from console command 'panicinfo'.
BRANCH=None
Change-Id: I4df3142497dc5ee21d100c4cb8118fb7a0ce7a7e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60314
Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
These constants are scattered around the various interface
implementations and should be in one place. This will also clean up
the u-boot side when ec_commands.h is copied there.
BUG=chrome-os-partner:20257
BRANCH=none
TEST=build link, spring, pit; test 'ectool hello'
Change-Id: Ib1425db00ec8220538d8c5c65107ac9548009516
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60810
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for the TI BQ24715 smart battery charger.
It provides the system power while limiting the battery
charge limit based system power needs.
This code is based off of the bq24725 code, however there
is one change (aside from the min/max) to fit into the
current charging state machine. The charging voltage
setting is cached to provide the illusion of it being 0V
which the hardware does not allow.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=Used on a board containing this charger.
Change-Id: I59af88fba6bf740e7caff72c9ed27eaf721758c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60804
This is necessary to support larger packet sizes for host protocol
ver.3. The host previously didn't have any way to know how big a
packet the EC could accept / respond with (except on LPC, where the
size is determined by the I/O window).
BUG=chrome-os-partner:20257
BRANCH=none
TEST='ectool protoinfo' returns good info; on link,
Protocol info:
protocol versions: 2 3
max request: 256 bytes
max response: 256 bytes
flags: 0x00000000
and on pit,
Protocol info:
protocol versions: 2 3
max request: 544 bytes
max response: 544 bytes
flags: 0x00000001
Change-Id: Ic1e3831d9b4a96ffbf365c0d09b6023472de39a9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60703
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Version 1 of EC_CMD_FLASH_WRITE will use as big a write as possible given
the available command parameter space. Falls back to 64 byte writes on old
platforms.
BUG=chrome-os-partner:20571
BRANCH=none
TEST=Copy burn_my_ec onto a link and run it. Write size should be 64 bytes
for the first half of the update (since the old EC doesn't support ver.1
of the write command) and 240 bytes for the second half of the update.
Change-Id: I5900de3a5700d7c82a2e0c3cf9921b7ced1c0343
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60511
Bitfields are now in registers.h where they belong.
BUG=chrome-os-partner:20529
BRANCH=none
TEST='crosec test' from u-boot still works
Change-Id: I726550a32b61111c906c1b10c628c5e47eff74fb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60179
The maximum packet length for LPC is limited by the I/O space window
size. But that's not the case for SPI or LPC. Rename LPC constant
before adding a SPI constant.
BUG=chrome-os-partner:20257
BRANCH=none
TEST=build link
Change-Id: I088327a11eff18d401c773db953700a36f9c1bb4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59959
Explicitly use enum for dma_channel, instead of ints (since channel is
1-based in the docs and 0-based in the enum). Add enum values for
other channels like USART.
Use volatile structs instead of typecasting through REG32().
Other assorted code cleanup.
Remove DMA2 partial support, since neither STM32F100R8 nor STM32L151x
has hardware support for it and it cluttered the code.
No functional changes.
BUG=chrome-os-partner:20485
BRANCH=none
TEST=from pit root shell, 'ectool version' still works
Change-Id: Ifdd62fb287c608a684ba8fa16934dfcab83ee609
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59949
Power LED PWM now uses the same functions as the hardware timer.
BUG=chrome-os-partner:20414
BRANCH=none
TEST=Suspend system. Power button LED pulses smoothly still.
Change-Id: Ib5ca6655d815462baaf68600ad14c4c0c680a6af
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59838
Clean up timer initialization code to be more general, so that we can
use timer 9 for the LSB on STM32L. Then use timer 4 for the watchdog
helper.
BUG=chrome-os-partner:18781
BRANCH=none
TEST=From EC console:
timerinfo -> current time still counts up properly
waitms 2000 -> prints watchdog info before rebooting
Change-Id: Ib0ba496b0eadb93756dcd1841857546910baf2a9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59612
Reviewed-by: Simon Glass <sjg@chromium.org>
This lets us force the EC to return various error codes, so that we can be
sure we're seeing them.
BUG=chromium:242706
BRANCH=none
TEST=none
Trigger various errors like so:
ectool test 0 14
ectool test 1 14
ectool test 5 14
ectool test 8 14
ectool test 0 33
Change-Id: Ia951cd7afacdcce6c8ec7d35d3bfb5b113dea694
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59327
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This will fix EC flash commands on pit, once the host side (u-boot and
cros_ec driver) are upgraded to match.
This change is backwards-compatible the EC still supports the existing
version 2 protocols for talking to existing AP/kernel/ectool.
Once the AP-side supports version 3 for SPI (and existing systems are
upgraded), we will remove older SPI support since we haven't shipped a
product which uses SPI.
BUG=chrome-os-partner:20257
BRANCH=none
TEST=disable cros_ec driver support in ectool; 'ectool hello' works on link
And with an old ectool which predates this CL, 'ectool hello' also works.
On pit, from u-boot prompt, 'crosec test' and 'crosec version' work, and
keyboard works.
Change-Id: I01f193e316e9aa442fe50d632dc8a4681723e282
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58908
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit-Queue: Doug Anderson <dianders@chromium.org>
This will be used often, so let's move it to test_util.c.
BUG=chrome-os-partner:19235
TEST=Pass flash test.
BRANCH=None
Change-Id: I2f685f657f8742c2b29e3b9c88ba01daacf982f8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58793
By 'make coverage', lcov is used to generate test coverage report in
HTML format stored in coverage_rpt folder.
BUG=chrome-os-partner:19235
TEST=Generate a report.
BRANCH=None
Change-Id: I44142eaaeb897cf09179764781120370920144cd
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58203
It's not used by the host command module or handlers, so shouldn't be exposed to them.
BUG=chrome-os-partner:20185
BRANCH=none
TEST='ectool hello' still works
Change-Id: I0122bd9ef33e71afab7e5cc035fb3b9d220334c6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58632
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The flags are specific to the LPC interface and not used by the host
command module, so shouldn't be present at that level.
BUG=chrome-os-partner:20185
BRANCH=none
TEST='ectool hello' still works
Change-Id: I6b2c3208fc398ea40d9e7cc7bf5ec206b3e317d8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58631
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
GPIO_HI_Z was a bit misleading (it's high impedance by default, but it's
actually an output not an input), but when we added GPIO_HI_Z_OPEN to mean
"open-drain output, pulled low by default", it got too confusing.
This renames those macros to:
#define GPIO_ODR_HIGH (GPIO_OUTPUT | GPIO_OPEN_DRAIN | GPIO_HIGH)
#define GPIO_ODR_LOW (GPIO_OUTPUT | GPIO_OPEN_DRAIN | GPIO_LOW)
BUG=chrome-os-partner:18788
BRANCH=none
TEST=none
No functional change, just renaming some macros. If it compiles, it should
be unchanged in behavior.
Change-Id: Ic84d7be8531f2b240a8eca4f6cfe5291ebd2d5ef
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58596
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds the BQ24738 smart battery charger, and a placeholder for the Falco
battery pack. I don't have either documentation or a battery to use to test,
so the battery pack stuff is just a guess (see crosbug.com/p/20142).
BUG=chrome-os-partner:20098
BRANCH=none
TEST=none
Well, if you like, from the EC console, run "charger". It should say
something like this:
> charger
Name : bq24738
Option: 1111100100010010 (0xf912)
Man id: 0x0040
Dev id: 0x000f
V_batt: 0 (1024 - 19200, 16)
I_batt: 0 ( 128 - 8128, 64)
I_in : 3968 ( 128 - 8064, 128)
>
But since I don't have either a battery or a spec, I had to guess at the
battery configuration. To test the charger, we kind of need a battery.
Change-Id: I6e63d6b5aa8be4ba15e2c427d2e86364ef6251b3
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58466
Sometimes initialization may fail due to bad I2C bus status. Let's allow
for maximum 3 tries of initialization 500ms apart from previous attempt.
BUG=chrome-os-partner:20020
TEST=Boot and check device type detection still works.
BRANCH=spring
Change-Id: I6ccedf77c92c4b6014ca24c7a63534316eaa7b6a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58071
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
