Previously if you were working on a single board you had to add BOARD=
to all of your make command lines. Now if you are in a board directory
you can just use "make", or "make clean", or any other top level make
command.
This commit also adds support for a top level "make flash" command that
can be used from the board directories as well. This command uses
openocd and requires that the board provides an openocd-flash.cfg file.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=(from a few board directories) make clean; make -j
(from the discovery-stm32f072 directory) make flash
Change-Id: Ie09a74881371169a2c3cd9cd9922f39f4873f1a6
Reviewed-on: https://chromium-review.googlesource.com/209669
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This is a straightforward conversion of existing tables
into X-Macro style definitions for the GPIO alternate
functions. This change in itself, is not particularly
powerful, but having all GPIO settings in a single file
makes a board easier to understand.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Followed by manual testing of interrupt on change and UART
functionality on STM32F0 based discovery board.
Change-Id: Ib7f1f014f4bd289d7c0ac3100470ba2dc71ca579
Reviewed-on: https://chromium-review.googlesource.com/207987
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.
This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Initial support for the ITE IT8380 chip with the following peripherals :
- 8250-like UART module.
- HW timer (with a 128-us tick period).
- GPIO with pins initialization and edge interrupt support.
other functions are stubbed.
- Clock : basic fixed frequency setup only.
It also add the dev board configuration as a test vehicle.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23575
TEST=make BOARD=it8380dev
on IT8380 dev board, use the EC serial console, use gettime from
console.
Change-Id: Id4bf37d1beb21d1a4bee404c9a0bc500025fe787
Reviewed-on: https://chromium-review.googlesource.com/175481
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
