This is useful for testing battery charge profiles. When enabled, a dump of
all battery, charger, and charge state information will be printed whenever
the battery charge percentage changes.
BUG=none
BRANCH=ToT
TEST=make buildall -j
On the EC console:
chg debug on
then watch the console while either charging or discharging the battery.
Disable with
chg debug off
Change-Id: I6725c461461f90fcd812873f97490e980ab47bc6
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/199816
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This returns all the parameters of the charger that must be monitored
frequently. While some of the fields are charger-specific, all of the
parameters are present in all supported chargers.
Nothing uses this yet.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=make buildall -j
All targets build; all tests pass.
Change-Id: Id3e00532469b193aeab3acf93e94afe3ffb8c6b6
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191985
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:25031
BRANCH=rambi
TEST=Manually
make BOARD=peppy
make BOARD=falco
make BOARD=rambi
make BOARD=squawks
On rambi and squawks, connect charger
ectool chargecontrol discharge
ectool i2cread 16 0 0x16 0x0a
It should return 16-bit negative integer.
Change-Id: I8a8dfa90d2ad82595ac7a420c3c8ffc13b12cde6
Signed-off-by: Justin Chuang <jchuang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182586
Reviewed-by: Dave Parker <dparker@chromium.org>
This is only for initial bringup that requires OTG to boot kernel. Note
that we are expecting firmware for USB ID detection and hardware change
to charger chip, so this is likely going to be thrown away.
BUG=chrome-os-partner:21964
TEST=Plug in OTG dongle and check VBUS voltage is ~5V
TEST=Unplug and check it's ~0V.
BRANCH=None
Change-Id: Iee66bef117188fea14a76459945be3bf5afef0dd
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167832
BUG=chrome-os-partner:20863
BRANCH=falco,peppy,slippy,wolf
TEST=Manual. On Peppy, there should no longer be "Charging
Voltage" messages every second on the EC console. On other platforms
verify that V_Batt reported by the 'charger' command is divisible
by 16.
Change-Id: Idd775a1d8033ff3405d10919e1e15ddddebc6c23
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62699
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is very similar to the BQ24725. There are just enough differences to
require a separate file.
BUG=chrome-os-partner:19976
BRANCH=none
TEST=none
Nothing to test until it's enabled.
Change-Id: I3247fcfde93ac75f5f9790acadc7feca28038608
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57811
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This reduces oscillations in the charging algorithm. This change also adds
more debug output so it's easier to see what the charging state machine is
doing.
BUG=chrome-os-partner:9572
BRANCH=link
TEST=discharge battery; charge battery; note infrequent but useful debug output
Change-Id: I4c8609c2ca8a6cab3eae151ecf2bb1520103fece
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/33811
Reviewed-by: Rong Chang <rongchang@chromium.org>
We can clear the reset cause in system pre-init now because of a
previous change which preserves it across a sysjump.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I1d8b99df5a0be0de9545d22ad1a6b7fb3140f813
This change adds a common part of smart battery driver. Following
features are not implemented, or in chip specific driver:
Battery access control, authentication, factory mode
Manufacturer access/data commands
Block read/write, device name, flash data
Chip specific features, per cell info/temp/capacity
Signed-off-by: Rong Chang <rongchang@google.com>
BUG=chrome-os-partner:7856
TEST=console command check battery staus
[unplug power]
> battery
[check voltage,current,capacity,time to empty]
[plug power]
> charger voltage 8400
> charger current 4250
> battery
[check current,time to full]
> charger input 4032
> battery
[check current,time to full]
[wait 130 seconds, charger watch dog timeout]
> battery
[check current]
Change-Id: Ifac17a0892f52e8f37eebc14b00e71f18360776c
Signed-off-by: Rong Chang <rongchang@chromium.org>
Battery charging state machine contains many file changes.
This is the 1st part of the break down. Refactor original
test code into board dummy driver. Normalize charger API.
And import link's charger IC driver.
Signed-off-by: Rong Chang <rongchang@google.com>
BUG=chrome-os-partner:7855
TEST=build without warning and error
BOARD=bds make
BOARD=link make
BOARD=discovery make
Change-Id: I34b6e9862a45331378916bc77653d4adb22ca548
Refactor board/chip-specific code into corresponding directories.
Add support of the four I2C temp sensor in Link.
Use table lookup to handle different types of temperature sensors.
BUG=chrome-os-partner:7527
TEST=Correctly read EC internal temperature on bds.
Compile for link succeeded.
Change-Id: I694cfa54e1545798d877fafdf18c5585ab5f03e2
