gpio_set_level() now allows setting the pin level if GPIO_LOW or
GPIO_HIGH is specified. Previously, stm32 platforms did this even
though the definition of gpio_set_level() said it wouldn't work.
Fixed gpio_set_level() not setting level after warm reboot on stm32
because it was checking the GPIO_DEFAULT flag in the wrong place.
Fixed LM4 still mucking with alternate function settings and levels
even if GPIO_DEFAULT was specified.
And checked gpio_list[] and all of the calls to gpio_set_flags() to
make sure everything still behaves the same way it did before (or
better, in the case of actual bugs).
BUG=chrome-os-partner:18718
BRANCH=none
TEST=build all platforms; boot spring and link
Change-Id: I4b84815f76060252df235ff9a37da52c54a8eac5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48058
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
gpio_set_alternate_function() used 0 to mean "normal GPIO function".
But on chips like STM32L, alternate function 0 is actually a function
on some pins. So change "normal GPIO function" to -1.
Also add support for this on STM32L.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build and boot link and daisy
Change-Id: I9cdd9ad91a315b616e373a0dc9a50545cf9d20fa
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47903
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The implementation is identical on all stm32 hardware, so remove all
the duplicate copies from board.c files. mccrosskey doesn't have
GPIO_EC_INT so stub it out like we do on bds.
No functional change, just moving code.
BUG=none
BRANCH=none
TEST=build mccrosskey,daisy,snow,spring
Change-Id: I7d4378650d7b4c640c15180c41459a41620f5bd3
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45920
At present GPIOs must be staticly defined in a table. This is efficient
but inflexible, and requires error-prone and correponding #ifdefs both
in the board's gpio.h and gpio.c files.
Create a GPIO_UNSET option for GPIOs. This allows them to be assigned
an enum value, but have the actual use under program control.
BUG=chrome-os-partner:13064
BRANCH=snow,link
TEST=manual
build and boot on snow with later changes. See the AC power GPIO does
not change when un/plugging power.
Change-Id: Iab58275923d7d6cfce62c890b5db9b6758279a4c
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31302
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The current gpio_get_level() is pretty slow because it looks things up each
time. Add a new function to find out the register address and mask to use
to check the value for a particular GPIO.
Time-critical code can then use this to check a GPIO.
BUG=chrome-os-partner:10146
TEST=manual:
build and boot on snow;
Power on the board, hold power button for 10s and see that it powers off
Power control still works, thus GPIOs are functional
Change-Id: Ifc6c56f5cb811e0243e7712725a51948eabd42ab
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26175
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9117
TEST=version; board version should be 0 on proto1 and 1 on EVT
Change-Id: Ic64ad0d009151fbda09f5c1605ef50ae708cb6ae
This is referenced by various files, so should be in the gpio.h header.
BUG=none
TEST=manual:
build and boot on daisy, see that USB download still works
build on all platforms
Change-Id: If579c975ef6c82988b9e411eeaa97c950d9efce4
Signed-off-by: Simon Glass <sjg@chromium.org>
Add this to the GPIO API. It seems that the implementation is copied
in LM4 and STM32 so I have reluctantly done the same with this new
function.
BUG=chrome-os-partner:9424
TEST=build and boot on Daisy
Change-Id: Ifddc52e69b2b33af2645384c0171dd264e588fcd
Signed-off-by: Simon Glass <sjg@chromium.org>
This covers modules which need to initialize before task_start(), but
don't particularly care in what order they're initialized.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I69829aac8d1c3c14ee04916a794b84bbf03a09eb
This patch adds explicit handling of open-drain outputs
and adds Hi-Z for high-impedence state (floating) outputs.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
BUG=none
TEST=compile tested
Change-Id: I1a0c2e8366f6a82cd9cd7e83e57122944f2bdc2d
Added gpio_enable_interrupt() to enable them. This ensures that a
module which handles GPIO interrupts doesn't get them until it's
ready.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7456
TEST=toggle power button while rebooting; without this fix it triggers a hard fault.
Change-Id: I35d926053963a70dd9246ce46a4913603b2b2489
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7528
TEST=from debug console,
gpioget --> prints current level. Run a few times to see DEBUG_LED
value toggle.
gpioset debug_led 1 --> turns debug LED on. Run repeatedly to
override the idle task toggling it off.
Change-Id: I7c64044228697e052a9c20eb052d37a1f640f6e7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7499
TEST=press and release power button; should see debug messages
Change-Id: I8909ae4643afc98753edb690771618ad43135e3e
