First implementation of a low power idle task for the LM4 chip. The
low power mode is selected by defining CONFIG_LOW_POWER_IDLE in a
board.h file. This commit turns it on for Peppy, Slippy, and Falco
only because those are the only boards tested.
When using the low power idle task, the chip goes in to deep sleep
when it can. Deep sleep disables clocks to most peripherals and puts
the onboard flash and RAM into a low power mode. The chip is woken
out of deep sleep using the RTC in the hibernate module. Increased
the idle task stack size to handle more involved idle task.
In board.c, the array of GPIO info can be used to select which GPIO
points can wake up the EC from deep sleep. Currenlty selected are
the power button, lid open, AC present, PCH_SLP_S3, and PCH_SLP_S5.
Additionally the port with the KB scan row GPIO point is also
enabled to wake up the EC from deep sleep.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
BUG=None
BRANCH=none
TEST=Passes all unit tests. Runs on slippy, peppy, and falco with no
noticeable side affects. Verified that the power consumed by the EC
is lower when in S3, S5 and G3 by scoping the sense resistor
powering the chip.
Change-Id: I83fa9a159a4b79201b99f2c32678dc4fc8921726
Reviewed-on: https://chromium-review.googlesource.com/172183
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
If CONFIG_HOOK_DEBUG is defined, the maximum run time of each hook is
recorded. Also, record the delayed amount of time of HOOK_TICK and
HOOK_SECOND firing. The statistics are available through console command
'hookstats'.
Also fix a bug that CC_HOOK is used but not defined when
CONFIG_HOOK_DEBUG is defined.
BUG=chrome-os-partner:21801
TEST=Build with HOOK_DEBUG and check 'hookstats'
BRANCH=None
Change-Id: I3acba3abdd487cf20d9a532429f766cdddea2e93
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169274
This is part one of a series to merge the keyboard scan interface to
be common across all platforms.
This change just moves and renames files and APIs and removes some
read code, and sets up protocol-specific CONFIG options. It makes the
next CL which actually merges keyboard scanning easier to parse.
BUG=chrome-os-partner:18360
BRANCH=none
TEST=compile all boards; test keyboard on spring and link
Change-Id: I815a40aae4e5d5f333b8501aff9656080533d913
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46549
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Since it handles not just power button, but also lid switch, AC
detect, and other switches.
No functional changes; just renaming.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system, power on/off with power button
Change-Id: I51628a52293f7207715f5f6bf368a08fe6c3dbce
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36821
Now both copies of the event state live in host_event_commands.c, and
lpc / memmap just shadows the main copy.
BUG=chrome-os-partner:11172
TEST=manual
Boot system. should see events 0x2000, 0x80, 0x08 get set and then cleared.
At U-boot prompt, type on keyboard. Should set event 0x1000 get set,
but only on the first keypress (because U-boot doesn't consume that
event).
Then from EC console,
hostevent clear 0x1000 -> see event 0x1000 clear
hostevent clear 0x1000 -> no debug output (it's already clear)
hostevent clearb 0x1000 -> see event copy B 0x1000 clear
hostevent clearb 0x1000 -> no debug output (copy B is already clear)
Change-Id: I855c035865649ba1490cd9027157d5bcdcc9895f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27321
Also add snprintf(), and %X format code.
BUG=chrome-os-partner:10206
TEST=timerinfo; should print correctly. 'ectool battery' on host side should print same serial as 'battery' on EC console.
Change-Id: I5c9f69d1a20ee5d0a59440c122655adbf62c9aea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/24635
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
This adds SPI transaction support, and a debug command to read a few
values from the SPI EEPROM.
Note that the SPI controller is normally *disabled* with all its I/Os
high-Z, so this will not interfere with main processor or Servo on the
SPI bus. The bus is only enabled during the SPIROM command itself.
BUG=chrome-os-partner:7844
TEST=manual
1) Reboot system
2) on EC console, 'spirom'. Should print
Man/Dev ID : 0xef 0x16
JEDEC ID : 0xef 0x40 0x17
Unique ID : 0xd1 0x61 0x44 0xb0 0x63 0x5d 0x40 0x32
Status reg 1: 0x00
Status reg 2: 0x00
Note that unique ID is, well, unique, so it won't match my value. But
it should still be something not all 0xff's.
3) Power on the system. x86 should still boot normally, indicating
that the EC isn't interfering with the SPI bus.
Change-Id: I53bf5fdbbe7a37949375d0463e30e408cc6fb6a8
Additional help messages and usage are gated by
CONFIG_CONSOLE_CMDHELP, so we can turn it on if there's space (adds
about 3KB to image size) and turn it off when there isn't.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual
1) help
2) help list
3) help gpioset
4) gpioset -> wrong number of params
5) gpioset fred 0 -> param1 bad
6) gpioset cpu_prochot fred -> param2 bad
Change-Id: Ibe99f37212020f763ebe65a068e6aa83a809a370
Use the linker to sort console commands by name,
this saves execution time and memory.
BUG=none
TEST=generate several images with 5N, 5N+1, 5N-1 commands and check the
output of the "help" command.
Change-Id: Ib5d8f3bca726621c68ab152f4fa662cee355abb1
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
The EC console input handling code is being enhanced to accept
abbreviated command names.
If the abbreviation is unique, the appropriate command is used, if the
abbreviation is ambiguous, the command is handled as nonexistent. The
error message is being modified to mention that the command either
does not exist or is ambiguous.
This change also makes it impossible to have command names matching
the beginning of other command names. Two such cases are being fixed
(`ch' renamed to `chan' and `thermal' renamed to 'thermalconf').
BUG=none
TEST=manual
. program the new EC image. Try entering at the console:
> h
Command 'h' either not found or ambiguous.
Command returned error 1
> he
Known commands:
adc autofan battery ch charger
...
> help
Known commands:
adc autofan battery ch charger
...
Change-Id: Iaa3e91e1504e42daefb02d561e00c39003548197
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Some boards don't like to have every keyboard scan printed, but some
devs find this info comforting. Add a way for boards to select the
require console mask.
BUG=none
TEST=manual:
build and boot on daisy, see that key scan messages are suppressed.
build on all platforms
Change-Id: I8e6e640eaabc0a08e5427cd97f7089dda1238025
Signed-off-by: Simon Glass <sjg@chromium.org>
When PWM module detects fan stall, issue SMI warning and print warning
message to console.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:7497
TEST=Disconnect fan and power up. See warning message.
Change-Id: I4d96595f7f3cdfab5df333afc35206304bacab9d
This completes console output cleanup. The remaining calls to
uart_puts() and uart_printf() actually need to be that way.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
Change-Id: Ib1d6d370d30429017b3d11994894fece75fab6ea
This adds a 'ch' command which prints/sets which channels are active
This handles all the async output; the remaining debug commands will
be refactored to use ccprintf() / ccputs() in a followup CL.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
ch --> all channels active
ch 0x100 -> just port80 active
powerbtn -> system boots; only port 80 codes shown on console
Change-Id: I9efc43acec919b62b78c2c82c61946d32380adfe
Instead of using a runtime callback to register the console commands,
put them in a special linker section. So we can do a macro to "register"
them during the build.
It saves 684 bytes and a few microseconds at startup.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run a few commands from the BDS command line.
Change-Id: Id33ea210b9035bf76ed720373c74c5dd24ccd1b1
