1. Add flash control module for emulation board.
2. Fix system jump for Andes core.
3. Change the physical size of the flash on the chip to 256KB.
note:
1. Only IT839x series supports flash write protect by registers.
2. Static DMA method of flash code only for IT839x series and IT838x Dx.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. console command flashwp and flashinfo
1-a. flashwp enable
1-b. WP asserted and reboot
1-c. flashinfo RO protected now
1-d. WP deasserted and reboot
1-e. No protected
1-f. flashwp disable
1-g. WP asserted and reboot
1-h. No protected
2. console sysjump and sysinfo
2-a. sysjump rw
2-b. jumping to image RW
2-c. sysinfo, Copy : RW, Jumped : yes
2-d. sysjump ro
2-e. jumping to image RO
2-f. sysinfo, Copy : RO, Jumped : yes
3. RO/RW firmware image test
3-a. sysjump rw
3-b. use console command "eflash" to erase RO region,
erase OK and system still work.
3-c. reflash firmware
3-d. sysjump rw, sysjump ro
3-e. use console command "eflash" to erase RW region,
erase OK and system still work.
Change-Id: I7666a095e73026a02fb812e5143bc5172ab713e8
Reviewed-on: https://chromium-review.googlesource.com/271390
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Add EC2I control module for emulation board.
The EC2I bridge enables the EC to access the host controlled
module registers (e.g., host configuration module(PNPCFG) and SWUC)
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=EC2I read: Read a logical device page, the results are correctly.
EC2I write: Initialize PNPCFG success.
Change-Id: I900450d4a8c49182c438b69b5e738c12dc437fe4
Reviewed-on: https://chromium-review.googlesource.com/230410
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
This is a straightforward conversion of existing tables
into X-Macro style definitions for the GPIO alternate
functions. This change in itself, is not particularly
powerful, but having all GPIO settings in a single file
makes a board easier to understand.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Followed by manual testing of interrupt on change and UART
functionality on STM32F0 based discovery board.
Change-Id: Ib7f1f014f4bd289d7c0ac3100470ba2dc71ca579
Reviewed-on: https://chromium-review.googlesource.com/207987
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.
This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Initial support for the ITE IT8380 chip with the following peripherals :
- 8250-like UART module.
- HW timer (with a 128-us tick period).
- GPIO with pins initialization and edge interrupt support.
other functions are stubbed.
- Clock : basic fixed frequency setup only.
It also add the dev board configuration as a test vehicle.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23575
TEST=make BOARD=it8380dev
on IT8380 dev board, use the EC serial console, use gettime from
console.
Change-Id: Id4bf37d1beb21d1a4bee404c9a0bc500025fe787
Reviewed-on: https://chromium-review.googlesource.com/175481
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
