BUG=none
TEST=Used "shutdown -h now" Kernel console command to test on Kunimitsu.
With only battery after 1 hour, device enters to Pseudo G3 and the
V3p3A is off. With AC connected, device is in G3.
BRANCH=none
Change-Id: I955662eb69ac608e9b2d12bdcfbc1258ca83f3a5
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/292976
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Symbolic link kunimitsu_pd to glados_pd folder. Disable PD test
build until issue is fixed.
BUG=chrome-os-partner:43142
TEST=emerge-kunimitsu chromeos-ec and check EC and PD binaries
Change-Id: Ic0f1d73246333d8ec7752bb4c42b1c0ac220b5c3
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/292841
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Move common USB charger code out of board directory including
setting VBUS supplier when VBUS changes, and initializing BC1.2
supplier types on init.
This also enables re-enabling of Pericom BC1.2 detection interrupts
when VBUS is changed on all boards that use USB_CHG task.
BUG=chrome-os-partner:42292
BRANCH=none
TEST=make -j buildall. Tested on glados and samus by plugging in
a few different chargers and making sure we charge.
Change-Id: Ib102fbf7a6aace998e6fcb6d35f3c97e5f03f5c2
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/290453
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Configure boards whose chipset cannot be a USB UFP to disconnect
USB lanes when the data role is UFP.
BUG=none
BRANCH=strago
TEST=make -j buildall. tested on glados by adding ccprintf to
usb_charger_set_switches(). verified when we are DFP, USB 2
switches are connected and when we are UFP, they are disconnected.
Change-Id: Ic8c817a0cc21b56ee67239e8cc81d5cbbda8d4de
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/290422
Reviewed-by: Shawn N <shawnn@chromium.org>
Allow more than one SPI master.
Add CONFIG variables to address the system SPI flash.
To have SPI master ports, spi_ports array must be defined.
BRANCH=smaug
TEST=compile
BUG=chrome-os-partner:42304
Change-Id: Id43869f648965c1582b7be1c7fb3a38f175fda95
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288512
Commit-Queue: David James <davidjames@chromium.org>
For multi-byte ACPI memmap reads, we previously had a mutex to ensure
data continuity. A better approach is to use a read cache. Since the
kernel will enable burst mode before reading a multi-byte memmap
variable and disable it afterward, we can populate the cache on the
first read after enabling burst. This solution removes deadlock bugs, is
contained entirely in acpi.c, and saves a deferred function.
BUG=chromium:514283
TEST=Manual on Glados. Add prints in acpi_read, verify that multi-byte
reads come from cache and non-burst reads continue to function as
before.
BRANCH=Cyan
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I74e4927bf2b433e31a9ff65d72820fa087c51722
Reviewed-on: https://chromium-review.googlesource.com/288871
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enable Try.Src for Glados, Kunimitsu, Strago, and Oak so that they
default to sourcing power when connecting to other dual-role
devices.
BUG=none
BRANCH=strago
TEST=make -j buildall
Tested on glados by plugging in charger, hoho, and another
dual-role device and making sure we resolve roles appropriately.
Change-Id: I9393e30b35620eeda3ef1ef56366a97e59ba8054
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288247
Reviewed-by: Shawn N <shawnn@chromium.org>
Ported the USB-C muxes from Glados
Change-Id: I9d42108688a9070b982ae77f77633654bc6505ed
Reviewed-on: https://chromium-review.googlesource.com/282281
BUG=none
TEST=Tested the USB & DP status from "typec" console command.
Observed usb_mux_set() & usb_mux_get() function are getting called
and also the polarity of the USB-C is getting detected properly.
BRANCH=none
Change-Id: I56da12f4fe20a05a73e8b93893ba5a425a20808f
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/287360
Reviewed-by: Shawn N <shawnn@chromium.org>
Following features are enabled.
1. ALS OPT3001 is enabled
2. Charger ISL9237 is enabled
3. Sleep mode in G3 is enabled
4. CMD_HASH, CMD_TIMERINFO, CONSOLE_HISTORY, CMD_ACCEL_INFO, CMD_ACCES
are disabled to save the memory.
BUG=none
TEST=Device boots to UI.
BRANCH=none
Change-Id: I225dcafdb5b066b6d9b9b2b00bd06586d33d3527
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/286783
Reviewed-by: Shawn N <shawnn@chromium.org>
Allow multiple GPIOs to wake the EC from hibernate by requiring boards
to define hibernate_wake_pins and hibernate_wake_pins_used. In addition,
clean up the GPIO-skipping hibernate code, and skip setting PCH_RTCRST
as an input due to a bug on certain boards.
BUG=chrome-os-partner:42104
TEST=Manual on Glados. Run 'hibernate' from EC console, verify that EC
wakes with power button press or with "dut-control lid_open:no".
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I13a6e062393cab8ed7129eda253585951f771109
Reviewed-on: https://chromium-review.googlesource.com/285924
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Store at which frequency each sensor should be sampled.
This frequency is different from the sensor frequency:
- sensor frequency: frequency at which the sensor produce information.
- sensor sampling frequency: frequency at the which the EC gater
information.
If 2 sensors must be sampled at very different frequency,
we don't want to oversample the slow one, and filling the
software FIFO unnecessarily.
BRANCH=smaug
TEST=Unit test. Check that frequency is correct when sensor
frequencies change from IIO driver.
BUG=chrome-os-partner:39900
Change-Id: I4272963413f53d4ca004e26639dc7a2affd317eb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284616
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove duplicate board_discharge_on_ac() functions and create
CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM for boards that have a
unique implementation of board_discharge_on_ac().
BUG=chrome-os-partner:42294
BRANCH=none
TEST=make -j buildall.
load on samus and test 'ectool chargecontrol discharge' forces
discharging on AC, and 'ectool chargecontrol normal' resumes normal
charging.
Change-Id: I2b7c04b9278d07748d6d41798ceab1a7e90684e4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284911
Reviewed-by: Randall Spangler <rspangler@chromium.org>
GPIO_INT_DSLEEP is useful on LM4 to save power when in deep sleep
by allowing us to disable clock to gpio blocks unless it's needed
as a wake source. The MEC and ST chips don't have this option, so
all gpio's can be used as wake source from deep sleep. Therefore
remove this flag from all boards where this flag doesn't do
anything to remove confusion.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I4cb175431a22f100035a81b32e9367b510f4836e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284742
Reviewed-by: Shawn N <shawnn@chromium.org>
Remove board function callback on charge override timeout, since
the implementation should be common to all boards: send host event.
This function is called when a power swap fails during an issued
charge override and notifies the host so that it is aware that the
power swap did not succeed.
BUG=none
BRANCH=smaug
TEST=make -j buildall
Change-Id: Ia2a078a17aef6b302fd2b9fd21a5a92c628fd7db
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284923
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Remove duplicate definitions of USB charger min current across
boards and make one set of defines for standard USB charger voltage
and minimum USB charger current.
BUG=none
BRANCH=smaug
TEST=make -j buildall
Change-Id: Ib842fafb317417c8de9a67d314fdde4c1e47ad9d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284956
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Common battery cut-off host command / console command infrastructure
already exists behind CONFIG_BATTERY_CUT_OFF, so add the config rather
duplicating the code at the board level.
BUG=chromium:488157
TEST=Manual on Squawks. Verify that both "cutoff" on the ec console and
"ectool batterycutoff" succeed to cut-off the battery.
BRANCH=None
Change-Id: I159026d54924e058ea0262db04d8770c663ee613
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/271513
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
