PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
We will soon have a need to independently set a charge ceiling from both
the PD state machine and from incoming host commands. Store these
ceilings separately, and have the minimum take effect.
BUG=chrome-os-partner:43285
TEST=Pass unit tests. Also, host command current limit takes effect with
subsequent commit.
BRANCH=None
Change-Id: I0ecfe888a7df0d5da5a68999c164c7c841da348b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/293818
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove board function callback on charge override timeout, since
the implementation should be common to all boards: send host event.
This function is called when a power swap fails during an issued
charge override and notifies the host so that it is aware that the
power swap did not succeed.
BUG=none
BRANCH=smaug
TEST=make -j buildall
Change-Id: Ia2a078a17aef6b302fd2b9fd21a5a92c628fd7db
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284923
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Take profit of the hardware input current ramping/back-off integrated
in the BQ2589x charger by setting the current limits higher for BC1.2
USB modes and letting the hardware adjust to the actual charger
limitation depending on the VBUS voltage droop.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:42045
TEST=Connect a Nexus 9 DCP charger to Smaug and see the input current
adjusted to 1650mA without brown-out, read back the value properly from
the AP:
$ ectool usbpdpower
Port 0: SNK Charger DCP 4958mV / 1650mA, max 5000mV / 1650mA / 8250mW
Change-Id: I348e5ee4980a5652f72f279ab4e3a7126583b093
Reviewed-on: https://chromium-review.googlesource.com/282584
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
We normally do not charge from non-dedicated chargers. The process of
determining whether a charger is dedicated or not involves PD protocol
communication, so it can take some time to reach a determination. If no
battery is attached, the charger is likely our only source of power, so
don't cut it off.
BUG=chrome-os-partner:41258
TEST=Attach donette to glados system with no battery, verify that glados
boots to EC console and doesn't reset or panic.
BRANCH=None
Change-Id: I7c9cfcbd37b37ef16010cf1f246d8fddba6f6283
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/277074
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move the task responsible for detection of USB chargers to common code
to reduce code duplication.
BUG=chrome-os-partner:40920
TEST=Manual on samus_pd. Plug USB charger, verify detection is correct
on both charge ports.
BRANCH=None
Change-Id: I362f8b5b51741509e459c66928131f1f6d2a3b1d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276210
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move parts of usb_pd_config.h that are not part of the phy layer
out of usb_pd_config.h and into board.h. This cleans up the
division between the TCPC and TCPM as only the TCPC needs to
use usb_pd_config.h.
Also cleans up the use of the CC detection voltage thresholds
by creating standard macros to use based on Rp strength for the
board.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I946cceb38bea8233095b8a4b287102bb8a3a296d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270337
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Change the EC_CMD_USB_PD_POWER_INFO host command to report the input
current limit and the max current theoretically possible given the
charger. The input current limit field is useful for logging purposes
and the max current field is useful to give to powerd to determine
if we have a low power charger connected.
The max current is determined by checking if the charge supplier is
allowed to ramp. If the charge supplier is allowed to ramp and has
not completed ramping yet, then max current is the max current that
we are allowed to ramp up to. Once the ramp has completed, then max
current is the stable charging current. If the charge supplier is not
allowed to ramp, then max current is simply the max current as
registered with charge_manager. The point here is to keep the max as
high as possible until we know for sure it is lower to avoid showing
the user the low power notification until we know for sure.
This CL also adds a new charger type, USB_CHG_TYPE_UNKNOWN. For a short
period after a charger is plugged in, the supplier type may change and
PD negotiation is still in process, and therefore we tell the host we
have an unknown charger type. This allows powerd to show the charging
icon, but delay determining if this is a low power charger until we
know for sure.
BUG=chrome-os-partner:38548
BRANCH=samus
TEST=tested with zinger, a DCP, an SDP, and a proprietary charger.
tested that low power notification never pops up with zinger, even
if you purposely wedge charge circuit with "charger voltage 7000" on
EC console. tested that the other chargers all pop up low power
notification once the supplier changes from UNKNOWN to the real
supplier. used "ectool --name=cros_pd usbpdpower" to check current
values.
Change-Id: If8a9a1799504cc2a13238f4e6ec917d25d972b22
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265066
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Add a new supplier type for VBUS chargers (USB chargers which supply VBUS
but are not identified as another charger type).
BUG=chrome-os-partner:37168
TEST=Manual on Samus with subsequent kernel commit. Modify code to
reject all non-VBUS suppliers, charge with SDP port, and verify charge
icon appears in OS.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I5fbdb1cb57bd0224b01aaf5a763f93b678b6d204
Reviewed-on: https://chromium-review.googlesource.com/254346
Reviewed-by: Alec Berg <alecaberg@chromium.org>
In locked RO, the PD state machine is crippled and unable to determine
whether a charger is dual-role capable. In order to charge in locked RO,
assume that all chargers are dedicated.
BUG=None
TEST=Manual on samus_pd. Lock system and reboot to RO. Insert Zinger and
verify that system charges 3A @ 5V.
BRANCH=Samus
Change-Id: I88a3ff248914cd95ebce8e9b91de1001c0f78b55
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/250650
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add new charge_ramp module which works with charge_manager to
slowly increase input current limit in order to find the optimal
charging current. To do this it looks for either VBUS drooping
too low or for the charger to over-current.
BUG=chrome-os-partner:34946
BRANCH=samus
TEST=tested with a variety of BC1.2 chargers, type-C only chargers,
and PD chargers to make sure we always stabilize charging at an
appropriate current limit.
Change-Id: Icc95aa2738ddb221f163f91c14a342a0674f9e0f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/247304
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
When we find that charging is in a wedged state, we may wish to write a
PD log entry, but the PD MCU cannot detect such a state on its own.
Therefore, add a new command to ask the PD MCU to write a log of a given
type, and add a new board-specific custom log event.
BUG=chrome-os-partner:36668
TEST=Manual on samus:
./ectool --dev=1 pdwritelog charge 0
./ectool --dev=1 pdwritelog charge 1
./ectool --dev=1 pdwritelog 1 0
./ectool --dev=1 pdwritelog 2 0
./ectool --dev=1 pdlog
Verify log output matches expectation:
2015-02-12 11:12:49.290 P0 SRC
2015-02-12 11:12:49.296 P1 SNK Charger PD 20286mV max 20000mV / 3000mA
2015-02-12 11:12:49.303 P0 New connection
2015-02-12 11:12:49.310 P0 Board-custom event
--- END OF LOG --
Also, verify kernel logging of wedged event:
[ 181.378420] PDLOG 2015/02/12 19:13:44.019 P0 Event 02 (0000) []
Also, trigger wedged state on Samus and verify log entry is written.
BRANCH=Samus
Change-Id: I55c7c839cf8300fcd3931dccdaaf16c1065e31a8
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/248981
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Previously, we tried to minimize log spew by keeping track of previous
log entries and not writing new entries in some cases. Instead, we can
write a log on the following events only:
1. A port becomes active or
2. A port becomes inactive or
3. The active charge port power limit changes or
4. Any supplier change on an inactive port
Also, make charge_manager_save_log a non-static charge manager API
function, so that other modules can record a log, if they have reason to
believe a port has changed outside of a charge manager change.
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Make various power actions and observe logging.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I5d5d3e186e85fdb1c59797ffbfb2f5a6ec04d94d
Reviewed-on: https://chromium-review.googlesource.com/247891
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Since charge manager is now informed of all capability changes as they
happen, it makes sense to store the port capability within charge manager,
rather than storing in pd.
BUG=chrome-os-partner:36390
TEST=Manual on Samus. Insert 1A Apple charger, verify correct detection.
Run 'chgoverride -2' to prevent charging, then repeatedly insert +
remove a dual-role charger on the other charge port. Verify that
charging is still prevented. Finally, insert a dedicated charger and
verify that the override is removed. Also, pass unit tests and verify
correct detection in various scenarios with various chargers.
BRANCH=Samus
Change-Id: I3669050b37ddd67f6608bf790a07e74f86b6ac01
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/247724
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If a dual-role charger is plugged, we will not realize it is dual-role
until after we see a type-C charge source. It can cause us to briefly
charge from a dual-role charger, which has bad side effects related to
charge override and the lightbar. Fix this by not charging from a port
until we are fairly certain that it is a dedicated charger (based upon
PD discovery timeout).
BUG=chrome-os-partner:36390
TEST=Manual on Samus. Insert 1A Apple charger, verify correct detection.
Run 'chgoverride -2' to prevent charging, then repeatedly insert +
remove a dual-role charger on the other charge port. Verify that
charging is still prevented. Finally, insert a dedicated charger and
verify that the override is removed. Also, pass unit tests and verify
correct detection in various scenarios with various chargers.
BRANCH=Samus
Change-Id: Ia4154f34dd0a850b6e72bebadbd938f034532f14
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/247130
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add the charging events to the PD event log FIFO
and add an ectool to retrieve/decode them.
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Run `ectool --name cros_pd pdlog`, verify that
all log entries are dumped and the content matches expectation.
BRANCH=Samus
Change-Id: I65dd5696cc0487856ab42aff24134bcdfa1a8219
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238093
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If we're charging on a port and the active port supplier changes, it is
an indication of a significant change. Re-set the port as active, to
give the board-level function an opportunity to reject the port, in case
charging is untenable.
BUG=None
TEST=Manual on Samus. Plug Zinger, verify that 20V is negotiated
correctly.
BRANCH=Samus
Change-Id: I4a530d5bab510498dd9b30f141208ce33b52ef6b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/239250
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If two identical suppliers are capable of supplying equal power, select
the port which is currently active.
BUG=chrome-os-partner:34912
TEST=Manual on Samus. Plug Zinger into right port, verify that it
becomes active. Plug a new Zinger into left port, verify that the right
port stays active.
BRANCH=Samus
Change-Id: Ib1baf4bd3f619169f0e31ec509a2fe7dbd8c897e
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238766
Reviewed-by: Alec Berg <alecaberg@chromium.org>
- Correctly identify certain source ports (ex. c-plug to empty a-receptacle)
- Correct ectool power unit print (mV * mA != mW).
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Connect c-plug to empty a-receptacle, run
"ectool --name usbpdpower", verify that port power role is identified
as source. Also, verify that 5000 mV @ 500mA port correctly prints
2500mW total power.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Icf0850afc570a1056578df9f1a647079a00229b3
Reviewed-on: https://chromium-review.googlesource.com/238235
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
When battery is full and system is not in S0, then stop charging
and allow battery to power the system. Once battery is no longer
full and requests current, allow charging again. This is to work
around power consumption issues in our AC input path. The charge
override port is stored upon entering S3 and restored going back
to S0 so that the charge override port is not affected by this.
This also fixes lightbar so lightbar checks if battery is full
instead of checking raw percentage. The lightbar is also changed
to use the last tap direction if no charger is plugged in. And
the lightbar tap for battery threshold for turning green is
lowered to 95%.
This also moves some samus_pd board code out of interrupt handlers
and in to deferred functions to minimize time in interrupts.
BUG=chrome-os-partner:34640, chrome-os-partner:34847
BRANCH=samus
TEST=load onto samus. use battfake command from pd console to
set battery percentage. when system is in G3, see that
batt = 100% stops charging, and when batt < 100% it starts
charging again.
tested that we receive host command from EC with battery
information every time battery changes SOC.
Change-Id: Ia8e0721508e34ee3630f5e5b0c2f431a00329caf
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236411
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Ports should have source roles by default, and should go back to being
sources once we stop charging from them.
BUG=chrome-os-partner:31195
TEST=Manual on Samus. Connect Samus to dual-role port. Set override
port, verify that Samus charges. Attach dedicated charger, verify that
the dual-role port becomes a charge source again. Also pass unit tests.
BRANCH=Samus
Change-Id: Icf153117229cbf0f71d4bdeb888f73299acd5eeb
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/237452
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modify board_set_active_charge_port to return status indicating whether
the selected charge port was rejected. If rejected, zero out its
available charge and attempt to select a different charge port.
Also, reduce the length of related console prints.
BUG=chrome-os-partner:34677
TEST=Manual on Samus. Plug C-to-Arec into port 1, verify that charge
manager does not select port 1 as active and charging icon is not seen
in OS.
BRANCH=Samus.
Change-Id: I56e3337f90c04b93ef7cc9873af6ee0f4b1ffc7d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236361
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If override charge is selected on a port currently acting as a charge
source, but the attached device is also capable of acting as a source,
request a charge role swap and initiate a pending delayed port override.
If the role swap completes successfully and a charge source is found,
the selected port will become the override port. If the role swap fails
or no charge source is found within 2 seconds, the delayed port override
will be lost.
BUG=chrome-os-partner:28343,chrome-os-partner:31195
TEST=Manual on Samus. Connect two Samus units together through charge
ports.
"pd 1 swap power" - put port on test device into source role
"chgoverride 1" - set charge override, verify that role swap takes
effect and charge manager selects PD charge source, 900mA @ 5V
Disconnect charge cable, verify that charge manager goes back to not
charging.
BRANCH=Samus
Change-Id: Iadcc4dc98631661f254245eeff18973df517f652
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231900
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If our request is rejected, go to SNK_READY, but don't set
explicit contract flag.
This also changes charge manager slightly to avoid new power
request loops. A new power request is only requested if the
charge port changes, or if the active charge port changes its
voltage/current offering. A new power request does not occur
if the current ceiling changes, since the existing contract
still suffices.
BUG=chrome-os-partner:33692, chrome-os-partner:28332
BRANCH=samus
TEST=make buildall. use samus and make sure we negotiate for 20V
as normal. modify zinger to send a REJECT and make sure we go from
PD_STATE_SNK_REQUESTED to PD_STATE_SNK_READY and explicit contract
bit is 0.
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Change-Id: Iec02663364dcdc4aa66c681ec08911db7424abbc
Reviewed-on: https://chromium-review.googlesource.com/230522
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add host command to set charge port override.
BUG=chrome-os-partner:32003
BRANCH=Samus
TEST=Manual on Samus. Insert PD charger in port1 and BC1.2 charger in
port0.
./ectool --name=cros_pd chargeoverride 0 --> Charges from port 0
./ectool --name=cros_pd chargeoverride off --> Charges from port 1
./ectool --name=cros_pd chargeoverride dontcharge --> No charge port
./ectool --name=cros_pd chargeoverride 1 --> Charges from port 1
./ectool --name=cros_pd chargeoverride 2 --> Correctly returns error
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib35f797a4a24e96fd2e3c008ace3fd6291b89d25
Reviewed-on: https://chromium-review.googlesource.com/230910
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Don't charge from dual-role capable ports, unless an override is set to
force charge. Also, if an override is set to charge from a dual-role
capable port and a dedicated charger is attached, remove the override.
BUG=chrome-os-partner:32003
TEST=Pass unit tests
BRANCH=Samus
Change-Id: I4e81e39a9f6ba325fa8a5e8f0d77fd5bfc7a672c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229465
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Allow a charge port to be selected as the override port, which means it
will always be selected as the charge port, if any charge supplier is
available.
BUG=chrome-os-partner:32003
TEST=Attach PD charger and BC1.2 charger. Verify that active charge port
switches to BC1.2 after running `chargeoverride [port]` from console.
Also, pass unit tests.
BRANCH=Samus
Change-Id: Ia1b48ca89641842d51be7eed3b92d36d3eedc9ef
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227730
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When a PD charger is detected, gets its max charge capability, but
initially negotiate for its minimum charge mode. If we later determine
that the port will be the one active charge port, re-negotiate for the
max charge capability.
BUG=chrome-os-partner:32003
TEST=Manual on Samus. Plug in Zinger, verify that current limit is
initially set to 500 mA, then switches to 3000 mA shortly after. Plug in
two Zingers, verify that one provides 3000 mA current while the other
negotiates to 500 mA. Verify that the 500 mA charger bumps up to a high
current once becoming active.
BRANCH=Samus
Change-Id: Ifa562b72d763642fc8bd62bc7f5aaa4eda1ef950
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225922
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Update source and sink capacity tables for all PD boards. As
per spec, the first entry in both tables must be a fixed power
supply PDO. Added dual-role capable bit to fixed PDOs and added
new state variable to keep track of that information for each
port. This will be used to make decisions in charge manager and
to pass up via host commands.
BUG=chrome-os-partner:28869
BRANCH=samus
TEST=make buildall. use "pd 1 status" to check
if part partner is dual-role capable and check zinger is not,
C to A receptable adapter is not, and another samus is.
Change-Id: I49f034a372bc145cd524577c17ca210eec4c1013
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227170
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Add flag for whether or not device plugged into a given port is a
dual-role PD device. For now, the dual-role flag is always 0, but
need to add the flag to the host command now for compatibility
in the future.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=load onto samus, run ectool --name=cros_pd usbpdpower and
verify that for anything plugged in it says "dedicated charger"
Change-Id: I2d3c8c149802492f27a87a47aaa68fbf505ee7a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226820
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Get type-c port power info including power role, charger type,
and charging info. Also added host command to get number of type-c
ports.
Also adds new charging suppliers for pericom identified chargers
including DCP, CDP, SDP, proprietary, and other chargers. Priority
of these for charging is set in samus board file.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=run 'ectool --name=cros_pd usbpdpower' and verify correct
status with minimuffin, zinger, and type-C to type-A adapter.
Change-Id: I1dabbe7de4185a23df5684a5ea9a2d944f1f6ff5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223523
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow the list of charge suppliers and port selection priority to be
specified at the board level.
BUG=chrome-os-partner:32650
TEST=Manual on samus_pd. Plug + unplug PD and BC1.2 chargers, verify
that PD is always preferred and higher power port / supplier is always
selected.
BRANCH=Samus
Change-Id: Ic867a40120c809111bf76bf290ed6f204eab1168
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225292
Reviewed-by: Alec Berg <alecaberg@chromium.org>
charge_manager is intended to manage charge limits from various tasks
(typically PD charge tasks and USB / BC 1.2 charge tasks). These tasks
can update the charge limit of a port by calling charge_manager_update
(thread-safe function). If the charge limit has changed,
charge_manager_refresh will be queued as a deferred task, which will
select the "best" charge port and set the proper charge limit.
In order to use charge_manager, a board needs to do the following:
1. Declare PD_PORT_COUNT in usb_pd_config.h
2. Implement board_set_charge_limit
3. Implement board_set_active_charge_port
4. Call charge_manager_update whenever the available charge on a port changes.
BUG=chrome-os-partner:31361
TEST=Manual on samus_pd, with subsequent commit. Insert and remove
various chargers, check console to verify PD charger always has priority
and correct current limit is set based upon 'best' charger.
BRANCH=samus
Change-Id: Iede120b69e0b46ed329bcf9b7e07c39ba5e9f77b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222723
Reviewed-by: Alec Berg <alecaberg@chromium.org>
