These versions of the queue add and remove methods support
using memcpy like routines to access regions of memory with
specific requirements. In particular, this will allow for
transfers between queues and USB packet RAM on the STM32
which has specific access requirements.
This change also includes an update to the mem* util routines
to make their prototypes compatible with C89 and POSIX
standards.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Test USB Echo functionality on discovery-stm32f072 board to
ensure that queues still function correctly.
Change-Id: I557064d99abfc3e8cfc98099a1d94334a976550c
Reviewed-on: https://chromium-review.googlesource.com/239217
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
This speeds up memset by copying a word at a time.
Ran the unit test on Peppy:
> runtest
...
Running test_memset... (speed gain: 141532 -> 32136 us) OK
...
Ran make buildall:
...
Running test_memset... (speed gain: 1338 -> 280 us) OK
...
TEST=Described above.
BUG=chrome-os-partner:23720
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: If34b06ad70f448d950535a4bea4f6556627a9b6f
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Reviewed-on: https://chromium-review.googlesource.com/185936
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
This speeds up memmove by copying a word at a time.
Ran the unit test on Peppy:
> runtest
...
Running test_memmove... (speed gain: 2156 -> 592 us) OK
...
Ran make buildall:
...
Running test_memmove... (speed gain: 143918 -> 32367 us) OK
...
TEST=Described above.
BUG=chrome-os-partner:23720
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Change-Id: I6a3ac6aed27a404c3bef227b6c886a59414b51d7
Reviewed-on: https://chromium-review.googlesource.com/186020
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This speeds up memcpy by copying a word at a time if source and destination are
aligned in mod 4. That is, if n and m are a positive integer:
4n -> 4m: aligned, 4x speed.
4n -> 4m+1: misaligned.
4n+1 -> 4m+1: aligned in mod 4, 4x speed.
Ran the unit test on Peppy:
> runtest
...
Running test_memcpy... (speed gain: 120300 -> 38103 us) OK
...
Ran make buildall -j:
...
Running test_memcpy... (speed gain: 2084 -> 549 us) OK
...
Note misaligned case is also optimized. Unit test runs in 298 us on Peppy while
it takes about 475 with the original memcpy.
TEST=Described above.
BUG=chrome-os-partner:23720
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ic12260451c5efd0896d6353017cd45d29cb672db
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Reviewed-on: https://chromium-review.googlesource.com/185618
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
This make minor syntactic changes and renames some camel-cased symbols
to keep checkpatch from complaining. The goal is to reduce the
temptation to use 'repo upload --no-verify'.
This is a big furball of find/replace, but no functional changes.
BUG=chromium:322144
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I0269b7dd95836ef9a6e33f88c003ab0f24f842a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180495
Remove comments if no longer applicable, or assign bug numbers if they
still are. Tidy some debug output. No code changes other than the
debug output.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms, pass unit tests
Change-Id: I2277e73fbf8cc93f3b1b35ee115e0f2f52eb8cf9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175215
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The definition of GPIO interface allows passing in multi-bit mask, and
this is what's done by gpio_config_module(). Fix STM32L's function so
that it doesn't accidentally set incorrect GPIO register values.
BUG=chrome-os-partner:22605
TEST=On Kirby, do 'led r 0' and check the value of 0x40020800 is
0x01540000.
BRANCH=None
Change-Id: I9a1c8074aab7345485a590ecf138bf99d0742997
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168739
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
We often need to watch for transitions between one state and another, so
that we can issue warnings or take action ONCE. This abstracts that "have I
already reacted to this" stuff into a single set of functions.
For example, this code reads a GPIO every time through the loop, but it only
generates an event when the GPIO value changes from 0 to 1:
cond_t c;
cond_init_false(&c);
while(1) {
int val = read_some_gpio();
cond_set(&c, val);
if (cond_went_true(&c))
host_event(SOMETHING_HAPPENED);
sleep(1);
}
BUG=none
BRANCH=falco,peppy
TEST=manual
make BOARD=falco runtests
Change-Id: I42393fcf3c4eb71b9551118a0f442d55c0691315
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65071
Perviously we use uint32_t for this, but this doesn't compile for 64-bit
environment (and likely doesn't for 16-bit either.) Use uintptr_t so that
we don't get size mismatch errors.
BUG=chrome-os-partner:19257
TEST=Run host emulated tests
BRANCH=None
Change-Id: I3cd66a745fa171c41a5f142514284ec106586acb
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50358
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This way debug commands which previously took only yes/no or on/off or
enable/disable can take any of those options.
BUG=chrome-os-partner:18467
BRANCH=none
TEST=Try "on", "off", "yes", "no", "true", "false", "ena", "disable", for
each of the following commands:
- ilim (spring)
- pll (link)
- power (spring/snow)
- hcdebug (all)
- kblog (link)
- ksscan (all)
- lp5562 (spring)
Change-Id: Ie8e0fae3775b1da711864bcba6682ba5e68a06f1
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46900
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This is a significant rewrite of the flash module, since it turns out
that much less of the flash logic is actually common between stm32 and
lm4.
BUG=chrome-os-partner:11699
TEST=on link,
(enable hardware wp)
flashinfo -> wp_gpio_asserted
flashwp enable
flashinfo -> wp_gpio_asserted ro_at_boot
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
flashwp disable -> error 7
flashwp now
flashinfo -> wp_gpio_asserted ro_at_boot ro_now rw_now
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
(disable hardware wp)
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> (no flags)
Change-Id: If22b02373946ce1c080d49ccded4f8fa3e380115
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28200
Reviewed-by: Vic Yang <victoryang@chromium.org>
Keys I keep hitting should work like I expect them to.
Home or Ctrl+A = move to beginning of line
End or Ctrl+E = move to end of line
Del = delete-right
Ctrl+K = delete to end of line
Ctrl+L = clear screen and reprint current line
Ctrl+N = next command
Ctrl+P = previous command
Also, improve filtering of escape sequences and non-printable
characters, so hitting unsupported keys or control codes doesn't mess
up the current line of input.
BUG=chrome-os-partner:11666
TEST=manual
type 'fhelpbar'
home -> cursor moves to beginning of line
Ctrl+E -> cursor moves to end of line
Ctrl+A -> cursor moves to beginning of line
(of course, if you're using Minicom, you'll need to type Ctrl+A A, since
Minicom uses Ctrl+A as its control key)
del -> 'helpbar'
end -> cursor moves to end of line
left-arrow 3 times -> cursor moves under 'b'
Ctrl+L -> screen clears, cursor still under 'b'
Ctrl+K -> 'help'
Ctrl+Y Page-Up Page-Down -> nothing printed
enter -> prints known commands (output of 'help' command)
Ctrl+P -> 'help'
Ctrl+N -> empty command line
Change-Id: Id893c93b26db8f3deed6ea8be5aab88a3daaead4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28143
The EC console input handling code is being enhanced to accept
abbreviated command names.
If the abbreviation is unique, the appropriate command is used, if the
abbreviation is ambiguous, the command is handled as nonexistent. The
error message is being modified to mention that the command either
does not exist or is ambiguous.
This change also makes it impossible to have command names matching
the beginning of other command names. Two such cases are being fixed
(`ch' renamed to `chan' and `thermal' renamed to 'thermalconf').
BUG=none
TEST=manual
. program the new EC image. Try entering at the console:
> h
Command 'h' either not found or ambiguous.
Command returned error 1
> he
Known commands:
adc autofan battery ch charger
...
> help
Known commands:
adc autofan battery ch charger
...
Change-Id: Iaa3e91e1504e42daefb02d561e00c39003548197
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9447
TEST=update from old EC 517 to this one
Change-Id: I275b5bf6c4ae1ab6e0c0a05cf9260314d644c79b
I keep hitting the darn arrow keys. Until we can do something more
elegant like a real command history, this will at least keep me from
corrupting the display and input buffer.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=type 'help' and some arrow keys, then enter. Should print help, not an error.
Change-Id: Idb552e9c22876fc2dc1f349f0038e94048f00aa7
