Add functions and associated test to read/write a 32 bit register
BRANCH=smaug
TEST=Test on smaug with bm160 driver
BUG=chromium:39900
Change-Id: Ieff24b65f1eb8610874fe13c4a8fadf583a218cb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/277535
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The memcpy like routines for moving to and from usb packet
RAM couldn't deal with all unaligned uses, this fixes their
behavior. In particular, a previous caller might assume
that the packet RAM addresses were contiguous and attempt
to break up a call into two separate chunks (as the queue
insertion/removal code does). But this can lead to invalid
pointers passed to these memcpy routines. A much cleaner
solution is to make the packet RAM address space contiguous.
To do so the memcpy routines take packet RAM addresses
instead of AHB address space mapped addresses and
__usb_ram_start needed to change to be of type usb_uint so
that pointer arithmatic on it worked correctly on all platforms,
this also allowed the usb_sram_addr macro to be simplified.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Verify that USB still works on Ryu and discovery-stm32f072
Change-Id: I479461f07a3203f1e6e0cf9705f512a5a43c4646
Reviewed-on: https://chromium-review.googlesource.com/264764
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Add hook for battery state of charge change. Hook will be used
to cleanup the samus charging workarounds to follow.
BUG=none
BRANCH=samus
TEST=make -j buildall
Change-Id: I99cbb8264783802139cac689804b056623063695
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245252
Reviewed-by: Shawn N <shawnn@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Enough USB support to be able to enumerate the device and use bulk or
interrupt endpoints.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28295
TEST=with the following USB console CL, connect a Fruitpie through USB
and use its console over USB.
Change-Id: I37b7f3b6a754cb82ab5f940ea20122d2e16b3b5b
Reviewed-on: https://chromium-review.googlesource.com/193983
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
To test drivers, we need a way to fake I2C periphrals. With this CL, a
fake peripheral can be done by declaring its own I2C read/write
functions. The fake I2C peripherals may return EC_ERROR_INVAL to
indicate it's not responding. The emulator I2C read/write call scans
through all registered I2C peripherals and uses the first response.
BUG=chrome-os-partner:19235
TEST=Pass sbs_charging test with the next CL.
BRANCH=None
Change-Id: I9380dc40e147781b42e09eb6979c864bbd9f2ac4
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169511
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Before this change drivers had no way of knowing that a frequency
change was coming. This could cause problems for some drivers (like
i2c) that need to make sure that a transaction isn't happening while a
frequency change is happening.
The PRE_FREQ_CHANGE archiecture is very simple here and we don't allow
any way to cancel it.
At the moment, we guarantee:
- We won't call PRE_FREQ_CHANGE with interrupts disabled, so acquiring
locks / sleeping is OK.
- We'll call the actual HOOK_FREQ_CHANGE after the PRE_FREQ_CHANGE.
PRE_FREQ_CHANGE and HOOK_FREQ_CHANGE should not use deferred function
calls.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: I2731a3e85d41e749fa571fdb74b5c9b12043cda6
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167101
(cherry picked from commit d84c0dbbf7c5a72917a820e292ecfdfa698d0fb9)
Reviewed-on: https://chromium-review.googlesource.com/167148
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is the first version of pthread-based RTOS emulator. With this, we
will be able to test high-level modules entirely on the host machine.
BUG=chrome-os-partner:19325
TEST='make runtests' and see tests passing.
BRANCH=None
Change-Id: I1f5fcd76aa84bdb46c7d35c5e60ae5d92fd3a319
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49954
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
