The same code exists in four (soon to be five!) different power
sequencing drivers, so move it up to common.
BUG=None
TEST=Manual on Samus. Run "pause_in_s5 on" on EC console, verify that
system stops in S5 on shutdown. Run "pause_in_s5 off" on EC console,
verify that system again goes to G3 on shutdown.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Iaf05ef7ce017be4f9d173e83e985a7a879ba278c
Reviewed-on: https://chromium-review.googlesource.com/269566
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
We don't have available GPIO pin for power button as the hibernate
(stand-by) wake-up source. Also, we don't want to do board change.
So, put the EC in a decent infinite loop to pretend the hibernate mode
and wait for particular wake-up event. This should be fine because
the AP is already down before EC hibernates.
BUG=chrome-os-partner:25435
BRANCH=Nyan
TEST=see comment #6 of issue for detailed test steps.
Change-Id: I2cae131789f9ca5808b60d5f2495222ca9016e7c
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186061
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For the better naming for power/common.h, we rename CONFIG_CHIPSET_X86
to CONFIG_POWER_COMMON (no one is actually using it). But keep
CONFIG_CHIPSER_TEGRA for power/build.mk.
BUG=chrome-os-partner:25068
BRANCH=nyan,falco,link,peppy,rambi,samus,squawks
TEST=build only
Change-Id: Ibf1a4c24088dfddac39b38a95b3b887c195152d5
Signed-off-by: Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182732
Integrate with power/common.c -- a real state machine now. Also remove
duplicate and unused functions/consts.
BUG=chrome-os-partner:24831
BRANCH=nyan
TEST=on nyan rev 3.12.
re-plug AC: PASS, power on 2
reboot: PASS, power on 2
power off (S5), power on: PASS, power off 4, power on 5
power off (G3), power on: PASS, power off 4, power on 5
lid close / power off (S5)/ lid open: PASS, power on 3
lid close / power off (G3)/ lid open: PASS, power on 3
press power button and release: nothing happens after 15s.
button off (S5)/ on: PASS, power off 3, power on 4
button off (G3)/ on: PASS, power off 3, power on 4
power off (S5)/ button on: PASS, power off 4, power on 4
power off (G3)/ button on: PASS, power off 4, power on 4
button off (S5)/ power on: PASS, power off 3, power on 5
button off (G3)/ power on: PASS, power off 3, power on 4
button off (S5)/ lid open: PASS, power off 3, power on 3
button off (G3)/ lid open: PASS, power off 3, power on 3
is off, long press button (60s): power on 4, too long, shutdown, stay off
is on, long press button (60s): power off 3, stay off
apreset cold: entered to S5, power off 3, power on 5
apreset warm: power state is not changed, but reboots to BIOS.
Change-Id: Ie12fa4f79b6156f71f89155b2b01880914809c75
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182348
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Renaming file names is the first step. Please see issue tracker
for more details.
BUG=chrome-os-partner:24832
BRANCH=link,falco,samus,rambi,peppy
TEST=build all x86 boards.
make clean BOARD=link && make -j32 BOARD=link && \
make clean BOARD=falco && make -j32 BOARD=falco && \
make clean BOARD=samus && make -j32 BOARD=samus && \
make clean BOARD=rambi && make -j32 BOARD=rambi && \
make clean BOARD=peppy && make -j32 BOARD=peppy
Change-Id: I3a296a0c14f6bebefa858438b1320061ac71dd38
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181400
Reviewed-by: Randall Spangler <rspangler@chromium.org>
