Now that HOOK_INIT hooks are called from a task switching context, most
calls to task_start_called() should no longer be needed. This commit
removes them.
BRANCH=None
BUG=chrome-os-partner:27226
TEST=make -j buildall tests
TEST=Flash EC image onto samus and verify EC boot, AP boot, keyboard,
lid, and tap-for-battery all functional.
TEST=Flash EC image onto samus_pd and verify charging still works.
TEST=Flash EC image onto ryu(P3) and verify that EC boot.
TEST=Added ASSERT(task_start_called()) to the places where I removed
task_start_called(). Booted samus, samus_pd, cyan, and ryu with AC
inserted and verified that no ASSERT's were hit upon boot.
Change-Id: Ic12c61862e85ca3a0a295beedbb4eeee6d5e515b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/285635
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
The same code exists in four (soon to be five!) different power
sequencing drivers, so move it up to common.
BUG=None
TEST=Manual on Samus. Run "pause_in_s5 on" on EC console, verify that
system stops in S5 on shutdown. Run "pause_in_s5 off" on EC console,
verify that system again goes to G3 on shutdown.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Iaf05ef7ce017be4f9d173e83e985a7a879ba278c
Reviewed-on: https://chromium-review.googlesource.com/269566
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With this change we can use power event to configure sensors
and trigger motion detection in suspend.
BUG=chrome-os-partner:31071
BRANCH=ToT
TEST=Check power states. Check power up messages and commands are
present at the console.
Message at boot:
[0.007142 hash start 0x00010000 0x000096dd]
[0.007293 Inits done]
[0.007506 power state 2 = S3, in 0x0000]
[0.007765 power state 3 = S0, in 0x0000]
[0.007908 event set 0x00002000]
[0.008021 hostcmd init 0x2000]
[0.146870 hash done
f87d7824b439db923d270df016af5aabec51b73505b7c4faa6e40c16b12dd392]
Change-Id: I9c56fe5203506462f0820bbc8a5fe4528f6805ac
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226881
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add macro for default hibernate delay, and set to 7 days on samus.
Also, adds CONFIG_ option for hibernating early if low on battery.
For samus, setting early hibernate at 1 day when battery < 10%.
BUG=chrome-os-partner:33088
BRANCH=samus
TEST=make buildall
Added ccprintf("Target shutdown: %.6ld\n", target_time); to print
out target shutdown time after setting it. Verifed the following
on samus
1) If CONFIG_HIBERNATE_DELAY_SEC is left at default 3600 (samus
board.h does not overwrite it), then target time is 3600s.
2) If CONFIG_HIBERNATE_DELAY_SEC is defined in samus/board.h, then
target time equals that value.
3) If CONFIG_HIBERNATE_DELAY_SEC is defined as 1 week and
CONFIG_HIBERNATE_BATT_PCT is defined to 10% and
CONFIG_HIBERNATE_BATT_SEC is 1 day, then when battery is between 8-10%
target time is 1 day and if battery is at 11%, target time is 1 week.
Change-Id: Ief155ad6c327775fa348d3458fc47ee9dd8569c3
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224520
Reviewed-by: Randall Spangler <rspangler@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Hibernate is not supported on STM32F0. Disable system hibernate so that
the system doesn't auto-reboot after an hour in G3. This also benefits
us in terms of firmware size.
BUG=chrome-os-partner:31665
TEST=Boot on Ryu. Check 'hibdelay' and 'hibernate' commands are absent.
TEST=Boot Ryu from G3.
TEST=Change default hibernation delay to 1 second. Put system in G3.
Check it does not reboot.
BRANCH=None
Change-Id: Ia01d2d74bc5c22c01e29e5877bd4bd38ee7dddc8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214834
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When this option is configured, two changes take place.
First, the AP doesn't power on by default when the EC reboots. To boot it,
you can run the "powerbtn" command, or poke the power button manually, or
any of the normal things.
Second, we watch for power-related signal changes (anything that's connected
to the power_signal_interrupt() function) and keep track of them as they
happen. After a second with no further changes, we print the time and value
of each change. For example:
[19.939212 Port 80: 0x29]
[19.967971 HC 0x23]
[19.976236 Port 80: 0x3a]
[19.995700 HC 0x87]
[20.567884 Port 80: 0x73]
11 signal changes:
19.638241 +0.000000 PCH_SLP_SUS_L => 1
19.654378 +0.016137 PCH_SLP_S5_L => 1
19.654457 +0.000079 PCH_SLP_A_L => 1
19.654535 +0.000078 PCH_SLP_S3_L => 1
19.654587 +0.000052 PCH_SLP_S4_L => 1
19.659630 +0.005043 PGOOD_1_5V_DDR => 1
19.663199 +0.003569 PGOOD_1_5V_PCH => 1
19.664751 +0.001552 PGOOD_1_8VS => 1
19.668735 +0.003984 PGOOD_VCCP => 1
19.671883 +0.003148 PGOOD_VCCSA => 1
19.868406 +0.196523 PGOOD_CPU_CORE => 1
[21.908551 Port 80: 0xf0]
[21.908855 HC 0x48]
BUG=none
BRANCH=ToT
TEST=manual
Build with CONFIG_BRINGUP, notice those two changes.
Change-Id: I55fd2021a0eae7dbfd1aaf5d93971f65bf2367b9
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202574
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
See issue tracker for details.
BUG=chrome-os-partner:28518
BRANCH=tot,nyan
TEST=on big
% reboot ap-off
% powerbtn
[6.100943 power on 4]
Was power on 1 before fix.
% reboot
[0.098134 power on 2]
Was power on 1 before fix.
Change-Id: I7b2fd95234d16467edca041b1c12d63ca4b5112b
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/198070
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We don't have available GPIO pin for power button as the hibernate
(stand-by) wake-up source. Also, we don't want to do board change.
So, put the EC in a decent infinite loop to pretend the hibernate mode
and wait for particular wake-up event. This should be fine because
the AP is already down before EC hibernates.
BUG=chrome-os-partner:25435
BRANCH=Nyan
TEST=see comment #6 of issue for detailed test steps.
Change-Id: I2cae131789f9ca5808b60d5f2495222ca9016e7c
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186061
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Renaming file names is the first step. Please see issue tracker
for more details.
BUG=chrome-os-partner:24832
BRANCH=link,falco,samus,rambi,peppy
TEST=build all x86 boards.
make clean BOARD=link && make -j32 BOARD=link && \
make clean BOARD=falco && make -j32 BOARD=falco && \
make clean BOARD=samus && make -j32 BOARD=samus && \
make clean BOARD=rambi && make -j32 BOARD=rambi && \
make clean BOARD=peppy && make -j32 BOARD=peppy
Change-Id: I3a296a0c14f6bebefa858438b1320061ac71dd38
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181400
Reviewed-by: Randall Spangler <rspangler@chromium.org>
