This patch makes LED pulse using deferred call to save RAM and
CPU cycles.
This patch also adds led_alert API. It blinks LED as a warning.
BUG=b:37646390
BRANCH=none
TEST=Verify LED on in S0, pulse in S3, and off in S5.
Run 'led alert' command.
Change-Id: I8c61f91f095eed562d2ee9582868879241df626f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/675749
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This change makes the power LEDs pulse using PWM.
S0: solid green.
S3: pulsing amber (= mix of green and red)
S5: off
BUG=b:64975836
BRANCH=none
TEST=Verify LED behavior described above on Proto3
Change-Id: I696cf8279dd762236b7b7f000a316820d58916bf
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/669773
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change makes EC run vboot in the HOOK task. The vboot routine
requires battery and charger info. It waits in a deferred call
loop until the charge manager is initialized.
BUG=b:63586051
BRANCH=none
TEST=Verify the following cases:
A. Hardware reboot (type-c/BJ)
1. Unplug AC in S0 then plug in AC: BOOT/BOOT
2. Unplug AC in S5 then plug in AC: S5/S5
3. Unplug AC after A.2 then plug in AC: S5/S5
4. Press PB in S5: BOOT/BOOT
B. Software reboot (type-c/BJ)
1. Run EC reboot command in S0: BOOT/BOOT
2. Run EC reboot command in S5: BOOT/BOOT
3. Run EC reboot ap-off command in S0: S5/S5
4. Run EC reboot ap-off command in S5: S5/S5
5. Run host reboot command: BOOT/BOOT
6. Run host shutdown command: S5/S5
C. Recovery tests
1. Press RB and PB in S0: FAIL(*1)/PASS
2. Press RB and PB in S5: FAIL(*1)/PASS(*2)
3. Unplug AC in S0 then press RB and plug in AC: PASS/PASS
4. Unplug AC in S5 then press RB and plug in AC: PASS(*2)/PASS(*2)
*1: b:63668669
*2: b:63669512. Requires one more PB press.
Change-Id: I28f37fdad7f83d0d44570b9003e8c6a4b83b832f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/568699
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This patch gives EC the capability of verifying and jumping to
RW_A or RW_B. EC tries the slot stored in a persistent storage
(e.g. BBRAM). If verification fails due to invalid contents, EC
tries the other slot. AP's expectation and its reaction to the
state of the slots and the currently running image are summarized
below.
Since the system is still unlocked (CONFIG_SYSTEM_UNLOCKED), EC
won't try to verify or jump to RW yet.
| AP expects X
----------+---------------------------
SLOT_A=X | proceed
SLOT_B=X | proceed
----------+---------------------------
SLOT_A=X' | reboot to B
SLOT_B=X | proceed
----------+---------------------------
SLOT_A=X | proceed
SLOT_B=X' | reboot to A
----------+---------------------------
SLOT_A=X' | write X to B, reboot to B
SLOT_B=X' | write X to A, reboot to A
BUG=b:38462249
BRANCH=none
TEST=Lock the system and boot Fizz on barrel-jack and type-c.
Change-Id: I51e3abd4d9af44ab3d531561cb9bfa2e8d775f6a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/556286
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Fizz has two power sources: barrel jack and type-c port. It
selects a power source at boot and does not dynamicall switch
to the other ports after that.
Fizz initializes all power suppliers of all ports to zero then
initialize the source supplier (barrel jack or type-c port).
When both sources are provided, it prefers a barrel jack. This
detection is done by reading the voltage on PPVAR_PWR_IN.
If barrel jack is detected as a sink, type-c port works as a
source only. If type-c port is detected as a sink, type-c
port works as a sink only.
Fizz does not have a battery. So, battery module is removed.
BUG=b:37573548,b:37316498
BRANCH=none
TEST=Boot on both type-c & barrel jack.
Change-Id: If4f5ff0c6019d06ac9dacb5dd365f5aa96bffef3
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/499547
