Tristage all columns as soon as possible right after the power button is
pressed. This can avoid the silego chip to reset the EC.
Resume the interrupt mode after power button is released so that the
deasserted columns doesn't trigger EC reset.
Also change some function names for export.
BUG=chrome-os-partner:7486
TEST=
press g first, then power button. repeat many times. system is not rebooted.
press power button first, then g. repeat many times. system is not rebooted.
ESC+power is still reseting system.
The long press power button still shutdowns system.
Change-Id: Ie5dec20ec3d3c4ffbd4acf5a4dd7f63eec38af56
Since the events are requests for new patterns, we only want to do the
latest one. This does that.
BUG=chrome-os-partner:9349
TEST=none
No test: multiple events are rare. I had to fake them to see the problem.
Change-Id: I7e7de94655576e16c442a97097a7303e422a551a
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
The main CPU might need to know the particular hardware version the
system is running on. This information is available to the EC, this
change adds a mechanism for the main CPU to request this information.
The board version is defined as a flat 16 bit number.
BUG=chrome-os-partner:8722
TEST=manual
. this change was tested in concert with the appropriate coreboot
modification, the proto1 board returns board version of 0. The
code was modified manually to return a one off version - and the
coreboot indeed observed board version of 1
Change-Id: If434d33f43783b18cb202ea15819bd5804694b8e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
This adds "ectool vboot", which works like so:
# ./ectool vboot
0x06 image=A fake_dev=1
# ./ectool vboot 0
# ./ectool vboot
0x02 image=A fake_dev=0
# ./ectool vboot ff
# ./ectool vboot
0x06 image=A fake_dev=1
You can set or unset the fake dev-switch, and see which firmware image the
EC is running from.
BUG=chrome-os-partner:8313
TEST=manual
Boot the host, use crossystem to see the devsw_boot state. Change it with
the ectool command, reboot, see that it's changed.
Change-Id: Iaac40267338c6a07bc47b80e925e829bf1e1ae0c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
The Snow board has currently the second RW partition de-activated due to
flash space constraints, we don't want to send false information to the
tools.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=on Snow, flashrom -p internal:bus=lpc -i EC_RW -w ec.bin
Change-Id: I6da60028aa69aeb476d5c2d98df5a03ece961891
This makes timestamps much easier to read.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9866
TEST=timerinfo, taskinfo, battery commands have fixed-point numbers,
and timestamps printed in the log look right.
Change-Id: If91c83f725984c8e04bfb7cdcff316d9c3bfe24c
This simplifies the re-flashing for stm32 based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=On Daisy, flashrom -p internal:bus=lpc -w ec.bin
Change-Id: I66860383c34110b1edf852929c244a2b682bc105
On platform where the flash base address is non null (e.g. stm32), we need to
take it into account.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On Daisy, type "sysjump A" and "version" into the EC console
and observe that the commands succeed.
Change-Id: I95596d45f6970259d19d7063f6794fae0c400ab7
(Touchscreen was already disabled in S5)
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9736
TEST=from console, 'gpioget touchscreen_resetn' in these cases:
1) system is off -> 0
2) system is on with lid open -> 1
3) system is on with lid closed -> 1
4) system is suspended with lid open -> 1
5) system is suspended with lid closed -> 1
6) system is shut back down -> 0
7) suspend system with lid open, THEN close lid -> 0
Change-Id: I5fc80b72ea9dcfbf11f5280d79ae805c2ef1b6df
BUG=chrome-os-partner:9850
TEST=manual
Open the lid. The lightbar should turn on.
Change-Id: I14d1316e6b0cac7a7e2f5b08b7d14b6bbdfa5830
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
The VMA of the .data segment is in RAM, but we actually put it into FLASH.
The linker doesn't notice if it runs out of flash, so it creates an invalid
image.
This adds an explicit check to be sure it all fits. It also refactors the
region declarations to be more explicit. For vboot-enabled configurations,
CONFIG_SECTION_* - describes the extent of flash for one entire image
CONFIG_FW_* - the region within the SECTION for the firmware only
CONFIG_VBLOCK_* - the region within the RW SECTIONs for the vblocks
CONFIG_VBOOT_ROOTKEY - the region within the RO SECTION for the root key
Look at chip/lm4/config.h for the best example.
BUG=chrome-os-partner:9839
TEST=manual
Build it, run it.
Change-Id: I3c652e82d58a5328115cc750c80ecba6a3fd99a3
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
In order to perform testing across all future boards and enable easier
debugging, we need a host command to read temperature sensor name and
sensor type.
BUG=chrome-os-patner:9836
TEST='ectool tempsinfo 0' shows sensor name and its type.
Change-Id: I06d9c6b045902394179c35e2ee8bc8dc551e8e98
'ectool thermalget' should return error if sensor ID or threshold ID is
out of range. This CL fixes a bug that error codes mismatch.
BUG=chrome-os-partner:9840
TEST='ectool thermalget 0 10' gives error.
Change-Id: I74d0c66044cd31743c4fac0a8dc0431db6259e71
When the flash base address is non null (e.g. stm32), it's nice to have
the full ELF image (including the 3 copies) at the right address.
This doesn't change anything to the final .bin image but allow to load
directly the .obj with tools which handle ELF format.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=Flash ec.obj on a Snow board using the ST-Link JTAG over GDB.
Change-Id: I51a6d9c00b359c6204bd51b30ee7a4fec362d88e
Ensure we can jump between EC images without powering down the GAIA AP :
- preserve GPIO state
- go back to "power-on" state if needed in GAIA state machine.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=On Daisy, boot Linux, then type "sysjump B" and observed we can
still interact with Linux without any AP reboot.
Change-Id: Ia2bd0f65ea348813b120bcc3a3f3bdfa96a9877a
On chips where CONFIG_FLASH_BASE is not 0 (e.g. stm32), the reset vector
address check in system_run_image_copy would fail because we are
comparing an absolute address against a flash offset.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=on Daisy, type "sysjump B" in EC console.
Change-Id: Ib79677fb926a37fcf32f4aac013dc36b086f4464
This also updates the communication protocol between the EC and the AP in a
non backward compatible way.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=on Daisy with updated kernel driver, use the keyboard in ChromeOS
Change-Id: I5a50e9a74b9891153a37ea79318c8a66a1b0c5ca
This was used on the hybrid Badger-Lumpy systems for one-off testing.
It wouldn't necessarily work on a bare Badger board, and maintaining
it resulted in frequent build breaks.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=build link, bds, daisy; boot link and bds
Change-Id: Ib64ccad9f38d76832ab57f7254dbf32f3d5e4a5e
And start wiring to x86_power so it can detect AC state changes
(needed to enable/disable turbo).
*YES*, this compiles for BDS/Daisy now...
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9069
TEST=plug/unplug AC power and look for "x86 AC on" / "x86 AC off" in debug log
Change-Id: I8399fab9637d6635a1c615f07448fd45b86bc25f
The phenomenon is that there is a char on-hold in port 0x60 and the kernel
never picks it up. Hence the keyboard cannnot be recognized after resume.
It comes from multiple reasons:
1. The command I8042_CMD_RESET_BAT(0xff) and I8042_CMD_ENABLE(0xf4) didn't
clean the buffer.
2. clean_underlying_buffer() has clean the queue, but forgot to clean the
TOH (TO Host). Add keyboard_clean_buffer() to clean the TOH (To Host).
3. When KB interrupt is just enabled, the IRQ didn't sent if there is
a char queued in buffer already. keyboard_resume_interrupt() solves
this.
4. Not all keyboard reset should reset the buffer. Only the enable/disble
of controller RAM should NOT reset buffer. Other enable/disable
should clean the buffer.
5. i8042 commands (those commands to port 0x64) should NOT return ACK
even the parameter byte(s) goes to port 0x60.
6. Keyboard was disabled by kernel, but key stroke still sent to host
(this needs the BIOS to fix).
Also fix the minor issues:
1. I8042_CMD_RESEND should not return I8042_RET_ACK.
2. I8042_DIS_KB/I8042_ENA_KB should effect the controller RAM content.
3. only send out the scan code when keyboard is enabled.
4. add kblog command for future debug (disabled by default because it
neeeds 1KB of memory).
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
BUG=chrome-os-partner:9525
TEST=tested on link. Start from S0.
1. Run powerd_suspend.
2. Expect system is in S3.
3. Press any key to wake up system.
4. Expect system is up and keyboard is working.
5. repeat for 20+ times.
Change-Id: I1c48822687d7c1f7ef0e8d8bca54bf9b05fd785f
USB ports are disabled after jumping between firmware copies.
We need to record USB port state and restore them after jumping.
BUG=chrome-os-partner:9692
TEST=Manual
Change-Id: Ic5cb83bdd8e49017457f732d317a1b59ced59ead
Preparatory work to use common host command code between ARM and x86.
Just rename constants, do not change the binary API.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I534d427c9b50103273835a6f32a0ddb622c762b3
The recovery switch is the DOWN button.
BUG=none
TEST=manual
Install on BDS, open console.
Press the reset button, it should boot to firmware A.
Hold the DOWN button, press the reset button. It should stay in RO.
Change-Id: I82f72a56df463c7cc67bde7e09f3be1545c76129
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Use the linker to sort console commands by name,
this saves execution time and memory.
BUG=none
TEST=generate several images with 5N, 5N+1, 5N-1 commands and check the
output of the "help" command.
Change-Id: Ib5d8f3bca726621c68ab152f4fa662cee355abb1
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Sort the command name index, and then print them in file columns (as
before), but ordering columns first. This makes it much easier to
examine the 'help' command output.
BUG=none
TEST=manual
. program the new image
. execute the 'help' command
. observe output printed sorted 'columns first'
Change-Id: I7b15cef09a61fe20eb4ba5ee274ba1d72063f1c0
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Preparatory work to use common host command code between ARM and x86.
Every command sends back explicitly the size of the response payload.
The size of the response defaults to 0 ond can be updated.
Add a protocol version number returned as command 0x00 to help with
backward compatibility.
move a couple of function from lpc specific header to host commands to
be able to implement them for the I2C link.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9614
TEST=make BOARD=link
Change-Id: I6a28edf02996ddf6b7f32a3831d07d5f0271848f
This would throttle proto1 systems, if it weren't for a HW bug which
means we don't have prochot control over proto1 systems at all.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8982
TEST=system still boots
Change-Id: Ie42c034141f24795ec2bfee592e194001d3cd174
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=taskinfo; note that number of IRQ8 (I2C0) exceptions goes up more slowly
Change-Id: Ib93aaab80fdd19b7a35aec43903393baf506f2e8
The EC console input handling code is being enhanced to accept
abbreviated command names.
If the abbreviation is unique, the appropriate command is used, if the
abbreviation is ambiguous, the command is handled as nonexistent. The
error message is being modified to mention that the command either
does not exist or is ambiguous.
This change also makes it impossible to have command names matching
the beginning of other command names. Two such cases are being fixed
(`ch' renamed to `chan' and `thermal' renamed to 'thermalconf').
BUG=none
TEST=manual
. program the new EC image. Try entering at the console:
> h
Command 'h' either not found or ambiguous.
Command returned error 1
> he
Known commands:
adc autofan battery ch charger
...
> help
Known commands:
adc autofan battery ch charger
...
Change-Id: Iaa3e91e1504e42daefb02d561e00c39003548197
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Add a set of functions to deal with power on/power off, and checking
the power button. Then use these functions in a new top-level power
control loop.
This implements the following features:
- Cold reset powers off the AP
When powered off:
- Press pwron turns on the AP
- Hold pwron turns on the AP, and then 16s later turns it off and leaves
it off until pwron is released and pressed again
When powered on:
- The PMIC PWRON signal is released one second after the power button is
released (we expect that U-Boot as asserted XPSHOLD by then)
- Holding pwron for 8s powers off the AP
- Pressing and releasing pwron within that 8s is ignored
- If XPSHOLD is dropped by the AP, then we power the AP off
BUG=chrome-os-partner:9424
TEST=very ad-hoc:
1. build and boot on daisy, flash U-Boot with USB using
'cros_bundle_firmware -w usb', inserting daisy
USB cable when it says 'Reseting board via servo...'
2. Press cold reset, then power on, see that it powers on
3. Then hold power-on for 8 seconds and see that it power off
4. XPSHOLD function not tested yet (this should work in Daisy 2)
Change-Id: Ie471af0b4e690de7d6340e47e148c8ce3cda94f3
Signed-off-by: Simon Glass <sjg@chromium.org>
This function accepts a timeout value of -1, so add a comment to that
effect. Also make it deal with this explicitly since the current function
seems to return prematurely in that case.
BUG=chrome-os-partner:9424
TEST=very ad-hoc:
1. build and boot on daisy, flash U-Boot with USB using
'cros_bundle_firmware -w usb', inserting daisy
USB cable when it says 'Reseting board via servo...'
2. Press cold reset, then power on, see that it powers on
3. Then hold power-on for 8 seconds and see that it power off
4. XPSHOLD function not tested yet
Change-Id: I01bd81997836333ca33e61d48823e8ff41034d5f
Signed-off-by: Simon Glass <sjg@chromium.org>
