For samus, on PD connection or on resume to S0, if we are a sink,
and the other side supports PR_SWAP, then attempt a power swap.
This adds callback functions into board policy file to check
and issue power or data swaps if required by the product.
BUG=chrome-os-partner:31195
BRANCH=samus
TEST=connect samus to zinger and make sure zinger always ends up
as SRC-UFP.
connect samus to samus with both in S0 and see that
they swap power roles once and not data roles.
connect one samus in S0 to one samus in S5 and see that the one
in S5 is sink. then when you boot the one in S5 it switches to a
source.
connect samus to samus with both in S0. do chgoverride 1 on one
side to start charging from the other samus. then on the same
side, turn off the machine (S5) and resume (S0), and see that it
is still charging from the other samus (ie has not switched roles
to source).
Change-Id: Ifab2465fccef77448ac4771a3c2de1c867cbbec4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238302
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Create optional config to remove 'hash' console command and undef it
for a few space-constrained boards (ryu*, samus_pd).
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual,
- compile for ryu, samus_pd and save ~400bytes
- 'hash' command no longer appears as a console command
Change-Id: I054fd4473911dd362c2c1d171ee7aaad859d893a
Reviewed-on: https://chromium-review.googlesource.com/238433
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Remove common code across all PD policy layers to select the requested
voltage and build a Request Data Object (RDO).
BUG=none
BRANCH=samus
TEST=Load onto samus and connect zinger. Make sure we request the right
voltage (first 5V, then after initial contract is made, 20V). Make
sure input current limit is set appropriately by checking limit on EC
console using charger command.
Change-Id: Ic6bda5e23b2d7b7d710ffdf085e7fbc1b0c3add9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233673
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
For P3, we'll use PI3USB9281A, which fixes the I2C clock problem. Let's
remove the workaround and leave the clock enabled all the time.
BRANCH=Ryu
BUG=chrome-os-partner:31526
TEST=Boot on Ryu
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I05a3ebbff82282b69e3c5573608e500a34d370c0
Reviewed-on: https://chromium-review.googlesource.com/231180
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Ensure that the PD source changes the output voltage after
tSnkTransition delay after having sent the ACCEPT message
(rather than before).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33684
TEST=connect Zinger to a PD power sink and monitor VBUS and CC while
doing a 20V to 5V transition.
Change-Id: If86f59eec67630491f4e8dc13a52015ac2de918a
Reviewed-on: https://chromium-review.googlesource.com/230805
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Allow policy layer to request a PR or DR swap upon formation of
a power contract. Zinger always asks for a data swap so it can
be a UFP, and Samus asks for a data swap only if it is a UFP to
become a DFP.
BUG=chrome-os-partner:33754, chrome-os-partner:31195
BRANCH=samus
TEST=load onto samus and zinger and make sure they swap roles
upon connect with no collisions
Change-Id: I275c9669549c26f25c58f80845daad8edab11313
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229327
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The pull-up on USB D+ is by default enabled, as needed by DFU mode. In
normal operation, we should disable it unless case-closed debugging is
enabled.
BRANCH=None
BUG=chrome-os-partner:33544
TEST=Build ryu
Change-Id: I18d216d8fff61640e4fbc3ce259209b3f149abf1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229797
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for DR_swap, data role swap command.
BUG=chrome-os-partner:33686, chrome-os-partner:28343
BRANCH=samus
TEST=test with samus and zinger. use "pd 1 swap data" command
and verify data role swaps by using twinkie and "pd 1 state".
Change-Id: I410309199cdeecb26847a6bf217523fdfe688cba
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229192
This enables forwarding of the local PD/EC console
over debug USB. It gates the console functionality
based on the CCD mode that is set.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable partial CCD mode on ryu and verify that it is
enumerated by the host correctly, but doesn't respond
to console input, and doesn't generate output.
Enable full CCD mode on ryu and verify that it is
enumerated and that the console works as expected.
Verify that the console still works by default on the
discovery-stm32f072 board.
Change-Id: I0325ce9689486c41387d6075330be1d7d42f1d42
Reviewed-on: https://chromium-review.googlesource.com/229342
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This provides a framework for additional work. It
exposes an API (ccd_set_mode) that can be used by the
PD code to enable Case Closed Debug. Enabling CCD will
result in the USB 2.0 lines on Ryu (proto 2) to be
disconnected from the AP and for the USB peripheral to
be enabled and connected to the host. The result is
an enumerated device with no interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable CCD ryu_p2 and verify that it is enumerated
by the host correctly. This requires a reworked
Ryu (proto 2 with pullup).
Change-Id: I1fbecdd5f94a61519cfc18c5e087892c6bd77fde
Reviewed-on: https://chromium-review.googlesource.com/229139
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This simply renames ryu to ryu_p1, and ryu_p2 to ryu. 'ryu_p1' will be
kept for a while and will be decommisioned when most developers make
switch to the new boards.
BRANCH=None
BUG=chrome-os-partner:33583
TEST=Build ryu and boot on P2 board.
Change-Id: Ief61c64c6aefdaeae76ac7b86e0ea28131810aa1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add delay for power supply startup time before sending source
capabilities packets.
BUG=none
BRANCH=samus
TEST=load on samus, plug in C to A receptacle adapter, see that
VBUS enabled before source cap packet sent.
Change-Id: If3b595e1671d089e859693b420841a639fdb146b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227423
For request message, add the operational and max current for each
board. If the requested power is less than the operational power
required, then set mismatch bit.
BUG=none
BRANCH=samus
TEST=make buildall. load onto samus, plug in zinger and see
that request 20V, operational current 3000mA and max
current of 3000mA.
Change-Id: I4df45d88b7e060f66ff5b806f6fe30803f1afcf7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227393
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Remove redundant 5V source PDOs in source cap packet. We only
need one 5V advertisement with the maximum current that we can
provide.
BUG=none
BRANCH=samus
TEST=make buildall
Change-Id: I94a01813787eb92fafbf600dcbbc8a2f0aa69e2b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227392
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Add support for PR_SWAP command as per PD specification.
BUG=chrome-os-partner:28343
BRANCH=samus
TEST=test by connecting two samus' and running 'pd 1 swap power'
from console. verified that both sides switch power roles by
observing console output. also tested against third party
devices.
Change-Id: I0e8738b544de9f9a4348250630e67d0fefb4486d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225559
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Update source and sink capacity tables for all PD boards. As
per spec, the first entry in both tables must be a fixed power
supply PDO. Added dual-role capable bit to fixed PDOs and added
new state variable to keep track of that information for each
port. This will be used to make decisions in charge manager and
to pass up via host commands.
BUG=chrome-os-partner:28869
BRANCH=samus
TEST=make buildall. use "pd 1 status" to check
if part partner is dual-role capable and check zinger is not,
C to A receptable adapter is not, and another samus is.
Change-Id: I49f034a372bc145cd524577c17ca210eec4c1013
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227170
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
There is no external pull-up on UART signals and this could lead to
garbage characters received. Let's enable the internal pull-up to avoid
this.
BRANCH=None
BUG=None
TEST=On a Ryu board with which UART Rx gets garbage when servo is not
connected, check that we don't get garbage characters anymore.
Change-Id: I014b399dfecc1b8495cce7c80c481c3668976084
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225095
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The battery cut-off is achieved by putting BQ27742 in SHUTDOWN mode.
BRANCH=None
BUG=None
TEST=Unplug AC and do 'cutoff' in EC console. The EC console goes
unresponsive.
Change-Id: I4a1aa359d79333d47aaf53b685a52960e5dfd652
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225007
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is needed for inductive charging to work.
BRANCH=None
BUG=chrome-os-partner:31392
TEST=On Ryu, close the lid and check BASE_CHARGE_VDD_EN is toggled.
TEST=Open the lid and see the AP booting.
Change-Id: Ib153c08a803088b832c7d65261c71605c3378d5f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224804
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Integrate charge_manager and include several API changes designed
for reporting voltage.
1. Make pd_choose_voltage set the chosen voltage for use by caller.
2. Add voltage parameter to pd_set_input_current.
3. Add pd_get_role to grab the sync / source state of a port.
4. Add charge manager PD + type C port initialization to the pd
state machine.
BUG=chrome-os-partner:32003
TEST=Manual on samus. Insert Apple charger, verify charge limit is
selected appropriately. Insert PD charger, verify that charge port
switches to PD port. Remove + reinsert chargers, verify that port /
limit is selected appropriately. Remove battery, insert power source, verify
that our power source port never becomes disabled.
BRANCH=samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Idf3198c71d2ddf1e401e766fc82a4b7a02aed068
Reviewed-on: https://chromium-review.googlesource.com/223758
Reviewed-by: Alec Berg <alecaberg@chromium.org>
All non-interactive console prints should use their tasks channel
parameter to make it easy for developers to inhibit console output.
This CL corrects printf's in the various usb_pd_policy files that
belong to the USB PD task to use cprintf(CC_USBPD, ...) instead of the
macro reserved for interactive console commands ccprintf.
BRANCH=none
BUG=none
TEST=manual, set 'chan 1' and see none of the previous chatter
relating to USB PD. set 'chan 0x08000000' and see it return.
Output from DFP side for SVDM discovery now looks:
SVDM/4 [1] ff008041 340018d1 00000000 11000008
[1119.966911 DONE]
SVDM/2 [2] ff008042 ff010000
[1119.970135 DONE]
SVDM/2 [3] ff018043 00100081
[1119.973437 DONE]
SVDM/1 [4] ff018184
Change-Id: I47e5f4ec2d4a6a25f171177ead5ebc99409f80b6
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224191
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
So far, we always use channel 1 of the Tx timer and the configuration
code is hard coded. We need to support other channels for new Ryu
boards. Let's make this a configurable bit.
BRANCH=samus
BUG=chrome-os-partner:32660
TEST=make buildall
TEST=Plug in Zinger to Ryu and see 20V come up.
Change-Id: Id08d4eb0d6a5721d8a03672484d0892a0714383b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223836
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When the cable flip button is pressed, instead of only flipping on
Plankton side, we should also signal the port partner to flip. This is
done by sending a custom VDM. Upon receiving the flip VDM, the port
partner is responsible of flipping the DP/USB polarity.
Note that the "flip" here only affects the superspeed lanes. The CC
lines polarity is not changed. We need this for factory test automation,
and this "flip" function should only be used for testing purpose as it
clearly violates the USB PD spec and it only works on devices that
accept the custom flip VDM.
BRANCH=Samus
BUG=chrome-os-partner:32163
TEST=COnnect Plankton and Ryu. Press the button on Plankton and make
sure the polarity GPIOs on Ryu are negated.
Change-Id: I7ee5ea70067de4f422a7478623fe7fe8d3724372
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223325
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The PD task is using more space in the stack and I'm seeing frequent
stack overflow on Plankton. On Samus, we already increased the stack
size. Let's also increase this on Ryu and Plankton.
BUG=None
TEST=make buildall
BRANCH=None
Change-Id: I468985303b7fd38455dd1fed9db54544581c49cf
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223368
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for enabling Vconn on Raiden ports by defining
CONFIG_USBC_VCONN. This is enabled by default for ryu, samus,
and fruitpie.
BUG=chrome-os-partner:30445
BRANCH=samus
TEST=Load onto samus. Make sure we can still charge from zinger.
Plug in type-A to type-C adapter with pulldown and see that samus
becomes power source. Do a gpioget and verify that only one VCONN
GPIO is enabled (low), and the VCONN that is enabled is opposite of
the polarity queried by pd 1 state. Try both ports, both polarities
and make sure the correct VCONN gpio is enabled.
Change-Id: Icea4c18b9c813cf7e8e21fd4f455bbd5fb4dbc91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222850
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
There's already an external pull-up to PP3300. The internal pull-up has
no use but provides a leakage path when the AP is off.
BUG=chrome-os-partner:31762
TEST=Repeatedly power cycle Ryu. Check the system goes to S0/S5.
TEST=Power off from the AP. Check the system goes to S5.
BRANCH=None
Change-Id: Id0ae966414de01e3a2b91314f661f37941175a87
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222625
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Some platforms may need to take different actions depending on which
port is requesting a limit. Add a new port parameter to the
pd_set_input_current_limit API to accomodate this.
BUG=chrome-os-partner:32003
TEST=Manual on samus_pd. Verify zinger charges battery.
BRANCH=samus
Change-Id: I1578252c751b3a80b4da6ca68e2a958934283cbf
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222621
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add support for enabling USB type-C Vconn by defining CONFIG_USBC_VCONN.
Enable Vconn support for samus, ryu, and fruitpie.
BUG=chrome-os-partner:30445
BRANCH=samus
TEST=make buildall
Change-Id: Ibe247286c96fd5a8fa12c88a4e3a5fea02997134
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222284
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Changed sending of info VDM from the UFP side in SNK_DISCONNECTED
to the DFP side in SRC_READY to match the PD spec. Only the DFP
is supposed to send VDMs, and by default the power source is the
DFP. This affects simple DFPs such as power adapters, they must
initiate the info VDM once a power contract has been negotiated.
BUG=none
BRANCH=samus
TEST=load onto samus_pd and zinger and make sure that when you
attached zinger to samus, samus receives info VDM and prints out
something like:
VDM/7 [11] 18d1000b
Dev:1 SW:2280 RW:0
Change-Id: I16ceac31939fdc1c74be7323e628dd8706e1283b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221174
Reviewed-by: Todd Broch <tbroch@chromium.org>
Currently, when an assertion fails, the error message is like:
ASSERTION FAILURE '1 + 1 == 3' in command_apreset() at common/chipset.c:24
To save flash space, let's add an option to remove the failed
expression and function name. The error message becomes:
ASSERTION FAILURE at common/chipset.c:24
BUG=chrome-os-partner:32203
TEST=make buildall
TEST=Add an assertion and triggers it. Check error message.
BRANCH=None
Change-Id: Ie323d5b43cbff2cd8f6cd5bb46c1f34ecd16bd5e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219670
Reviewed-by: Randall Spangler <rspangler@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Hibernate is not supported on STM32F0. Disable system hibernate so that
the system doesn't auto-reboot after an hour in G3. This also benefits
us in terms of firmware size.
BUG=chrome-os-partner:31665
TEST=Boot on Ryu. Check 'hibdelay' and 'hibernate' commands are absent.
TEST=Boot Ryu from G3.
TEST=Change default hibernation delay to 1 second. Put system in G3.
Check it does not reboot.
BRANCH=None
Change-Id: Ia01d2d74bc5c22c01e29e5877bd4bd38ee7dddc8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214834
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Every time a type-C source is plugged in, send a special VDM to
read device info. Device info will contain RW Hash (sha1), a
unique hardware descriptor (USB_PD_HARDWARE_DEVICE_ID), a
software version number just for debugging (USB_PD_DBG_SW_VERSION),
and a flag for if the device is in RW. This feature is off by
default and can be turned on by defining
CONFIG_USB_PD_READ_INFO_ON_CONNECT, currently defined for samus
and ryu only.
Renamed the read RW_HASH VDM to READ_INFO since it now returns
more than just the hash.
When device info is received, we store the RW hash. In the future
we will use this to check if device needs an update.
BUG=chrome-os-partner:31361
BRANCH=none
TEST=load onto a samus and a zinger. test when you attach zinger
we send a VDM, and we get device info printed to console. also
use "pd 0 hash" to query last hash received.
Change-Id: I0ca57651cf8506ea738b080a6cf8e7b020ef8724
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213832
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
As a short term workaround for the I2C problem of PI3USB9281, we're
gating its SCL input when it's not addressed. This workaround will be
removed once we have the silicon fix.
BUG=chrome-os-partner:31526
TEST=Sanity check on P0 boards.
BRANCH=None
Change-Id: I57daf25f2ad2d94ac7e4192050b4d6bbdae9d51d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214064
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When the power button, volume up, and volume down buttons
are pressed during boot indicate to the AP that recovery mode
is enabled.
BUG=chrome-os-partner:31481
BRANCH=None
TEST=Benson tested this w/ his magic cables.
Change-Id: I2f285d6b8b71708eff53e8b46020e51c96f281a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213299
Reviewed-by: Alec Berg <alecaberg@chromium.org>
During flash erase operation, read is stalled and thus interrupt might
be serviced later. This can cause PD communication to fail and thus the
board reboots if there is no battery. Print a warning message in this
case.
BUG=chrome-os-partner:31127,chrome-os-partner:31207,chrome-os-partner:31362
TEST=Boot Ryu, on software sync, see warning message before board
reboots.
BRANCH=None
Change-Id: If327a4f533fd2dfa83f92531148bd52ace927e03
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212264
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Currently charge state machine resets input current limit to default
every time AC is connected. Problem is by the time charge state machine
gets around to setting input current, it could have already been set
by successful PD negotiation, and this ends up overriding that value.
This fix has the state machine store desired input current limit, as
determined from PD negotation or any other place, and send last desired
input current limit on AC connect.
BUG=chrome-os-partner:24461
BRANCH=none
TEST=load on samus, test toggling between "pd 0 dev 5" and "pd 0 dev 20",
and test plugging and unplugging zinger numerous times, and verify charger
command always gives the expected input current limit based on PD
negotiation.
Change-Id: I18d8acc9e2085739e783c9c70c682d46bcce7fdb
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211639
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Set input current limit based on the max current from the
PD negotiation. For samus, this information is passed to
the EC as a host command. For ryu, the max current is set
directly following a negotiation.
CONFIG_CHARGER_INPUT_CURRENT is now just the default limit,
but after a successful PD negotiation, the limit can be
raised.
Note, for now the input current limit for samus is set to
2/3 of the value negotiated for. This is due to hardware
problems measuring input current on p2b boards.
BUG=chrome-os-partner:28532, chrome-os-partner:24461
BRANCH=none
TEST=tested on a samus. Verified input current limit using
"charger" console command from EC. Input current limit
after a reboot is 512. When zinger is plugged in, it jumps
to the appropriate value (currently 1280mA), and when
the negotiation is changed using the "pd 0 dev 5" command
on the PD console, the input current limit is adjusted to
match (2000mA).
Change-Id: Iab9186a0f9814655e3240217a9baf4a38f15f84d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211023
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Remove code for preventing PD negotiation until the battery
is at some minimum SOC. This was originally necessary because
transitioning voltages would cause the source voltage to go
briefly to 0V, which would kill power to the system unless
the battery was at some minimum level of charge. But, that
isn't true anymore. It is safe to transition up or down in
voltage and the source voltage should never drop to 0V.
BUG=chrome-os-partner:29499
BRANCH=none
TEST=make -j buildall. No need to do any more testing because
this code has been disabled for a while.
Change-Id: I8a3dca117f01f0f9c7d04b5d489e4a8588a89be6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211021
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In order for the AP to access the SPI part one needs to drive
PD_DISABLE_DEBUG to 1. While all the closed-case debugging is being
worked out set this signal 1 by default so that the AP can boot.
BUG=chrome-os-partner:31149
BRANCH=None
TEST=Built and flashed on ryu. SPI works from initial poweron.
Change-Id: I1fdb0457da9db07063f86959d9eb969e3bcd83ec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211141
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Previously if you were working on a single board you had to add BOARD=
to all of your make command lines. Now if you are in a board directory
you can just use "make", or "make clean", or any other top level make
command.
This commit also adds support for a top level "make flash" command that
can be used from the board directories as well. This command uses
openocd and requires that the board provides an openocd-flash.cfg file.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=(from a few board directories) make clean; make -j
(from the discovery-stm32f072 directory) make flash
Change-Id: Ie09a74881371169a2c3cd9cd9922f39f4873f1a6
Reviewed-on: https://chromium-review.googlesource.com/209669
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
On Ryu, we are using TPS65913, which doesn't support the 8-second long
key press power-off. Let's switch to firmware timer.
BUG=None
TEST=Do a long power button key press, and see the AP powering off and
not restarting.
BRANCH=None
Change-Id: Ic9eb6d525498c7cdedf8f053dd0a2fa2b568a443
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209850
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
We have three copies of 'typec' commands in three different boards. The
commands current mix hardware-specific logic and console command logic
together. Adding a board_get_usb_mux() interface to separate the logic
and deduplicate the console command logic.
BUG=None
TEST=make buildall
TEST=Test 'typec' command and verify GPIO settings.
BRANCH=None
Change-Id: Ie1825f49d32609c732db384679cb917f2f1a4082
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209955
Reviewed-by: Alec Berg <alecaberg@chromium.org>
