Rename tasks
TICK -> HOOKS
The hooks task handles more than just the TICK hook now.
X86POWER -> CHIPSET
GAIAPOWER -> CHIPSET
Kinda kludgy that the name of the task controls which chipset source gets
included. Change this to a CONFIG_CHIPSET_{X86,GAIA} #define to make it
easier to support future chipsets. Also, rename the task function to
chipset_task() so ec.tasklist is chipset-agnostic.
No code changes, just renaming constants and functions.
BUG=none
BRANCH=none
TEST=build bds,link,daisy,snow,spring
Change-Id: I163ce1cd27b2d8d030d42bb1f7eb46b880c244fb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45805
This reduces memory / code size, and gets rid of ifdefs in temp_sensor.c.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=boot system and run 'ectool temps all' every few seconds
- ectool temps all
The numbers should update over time.
Change-Id: Idaac7e6e4cbc1d6689f5d3b607c623a5cc536a4f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36940
Since it handles not just power button, but also lid switch, AC
detect, and other switches.
No functional changes; just renaming.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=boot system, power on/off with power button
Change-Id: I51628a52293f7207715f5f6bf368a08fe6c3dbce
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36821
Adds a new HOOK_TICK event which is called every 250ms (LM4) or 500ms
(STM32). This will be used to consolidate a number of tasks which do
small amounts of work infrequently, and previously needed their own
task functions.
This CL adds the tick task; subsequent CLs will consolidate watchdog
and other tasks into tick hooks.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=taskinfo shows TICK task as lowest priority
Change-Id: I9068ee99d56a5bf5c12afd86ad51998c013f4954
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36908
Reviewed-by: Simon Glass <sjg@chromium.org>
Since POWERSTATE is confusing whether it refers to battery power or
system power.
BUG=chrome-os-partner:15579
BRANCH=none
TEST=taskinfo; see CHARGER task
Change-Id: I5a237b1329cace4ce48ae39d8954c08a9912ed4b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36707
This works around a potential LM4 chip problem where edges on the FRMH
status bit don't always trigger interrupts. The workaround is to look
at FRMH for each channel in the interrupt handler rather than the
interrupt status, and to trigger the interrupt every 250ms to sweep up
any missed writes. We already do this for port 80 writes; this just
extends the workaround to all channels.
BUG=chrome-os-partner:13965
BRANCH=link
TEST=manual
- boot system
- EC console should show a number of HC lines for host command
- EC console should show a number of ACPI queries
- switch to root shell; keyboard should work
- ectool version should work
Change-Id: If02d685519c69ee88c055c8374a6c655a277e637
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/35871
Reviewed-by: Simon Glass <sjg@chromium.org>
With this CL, if CONFIG_FPU is defined (only for Link, ATM), the EC task
switcher will enable CONTROL.FPCA and expect all stack contexts to include
floating point state as well as normal state (an additional 18 words).
To support this, we need to increase the allocated stack space for each
task. The stack sizes are already chosen empirically, so I'm just rounding
them up a bit.
BUG=chrome-os-partner:14766
BRANCH=Link
TEST=manual
There should be no noticeable change. If you run the EC command "taskinfo"
you'll see the increased size each thread's stack, but everything that was
working before should continue to work just fine.
The additional overhead required to load and store another 18 words on each
context switch is not really measurable (I tried).
Change-Id: Ibaca7d7a2565285f049fda6906f32761e83207af
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/34391
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Increase stack size slightly for vboot hash task since the vboot
SHA256 function allocates ~300 bytes of stack data. Reduce stack size
for watchdog, power LED, and a few other tasks with simple call trees
where we can be sure an error path isn't going to blow past the
reduced stack.
This frees up ~1KB of RAM on STM32.
BUG=chrome-os-partner:13814
BRANCH=all
TEST=boot system; shmem should show more unused RAM; taskinfo should show
tasks still have unused stack
Change-Id: I47d6b77564a0180d15d86667cc0566a8919b776e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/32608
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
EC computes a SHA-256 hash of its RW code on boot. Also adds host and
console commands to tell the EC to recompute the hash, or hash a
different section of flash memory.
BUG=chrome-os-partner:10777
TEST=manual
1) ectool echash -> should match what the EC precomputed
2a) ectool echash recalc 0 0x10000 5
2b) on EC console, 'hash 0 0x10000 5'
2c) results should agree
3a) on ec console, 'hash 0 0x3e000' then quickly 'hash abort'
3b) ectool echash -> status should be unavailable
4) ectool echash start 0 0x3e000 6 && ectool echash && ectool echash abort && sleep 2 && ectool echash
status should be busy, then unavailable
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I6806d7b4d4dca3a74f476092551b4dba875d558e
Reviewed-on: https://gerrit.chromium.org/gerrit/26023
Charging state machine doesn't need to be able to preempt everybody.
Keyboard scanning and power button should preempt, because they need
to debounce/scan at a stable rate.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=system still boots
Change-Id: Id57c680b9fa4652bc10d19270620d63788a7b269
Mainly add a typematic task that counts down the delay. Set the initial delay
in the keyboard_state_changed() when key pressed and clean it when released.
BUS=chrome-os-partner:8463
TEST=press on a particular key and screen shows that key is repeating.
Change-Id: Ic8432f8b38b514476588e0b7ad8fdc8a0b0c0b51
I need to clean up the console commands and provide the same functionality
via ectool, but this is a good starting point.
BUG=chrome-os-partner:7839
TEST=manual
Power up the CPU. The lights should blink.
Change-Id: Ic05a171d2b647551f1cfc7d6b2fd101088cac137
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
This CL adds a charge state machine for SMB compliant battery pack.
Vendor specific charge constraints can be applied through function
call, defined in battery_pack.h .
BUG=chrome-os-partner:7526
TEST=Attach EC serial console
Unplug AC adapter: state ==> "discharge"
Plug AC adapter: state ==> "charge"
Battery full: state ==> "idle"
Unplug battery: state ==> "error"
Change-Id: Iabff0988a6067d37c17c11b060bbb7e66505c118
The thermal engine monitors the temperature readings from all sensors.
For each sensor, five threshold temperatures can be set:
1. Low fan speed.
2. High fan speed.
3. SMI warning.
4. Shutdown CPU.
5. Shutdown everything we can.
Each of these thresholds can be set to either a fixed value or disabled.
Currently the real implementation of SMI warning and shutting down is
left as TODO, as indicated in the comment.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8250
TEST=Manually change threshold value to test all actions can be triggered.
Change-Id: If168dcff78ef2d7a3203cb227e1739a08eca961e
Add a task to update fan speed in LPC mapped memory once per second.
Also added read_mapped_mem16 and read_mapped_mem32.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8183
TEST="ectool pwmgetfanrpm" shows same result as "faninfo" from ec
console.
Change-Id: Ibc536acd39f836ffcad0bfa7c9c14e730220bd49
A temperature polling task is added to achieve temporal correction and
also reduce the latency of reading temperature.
Factor out sensor specific part to keep code clean.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:7801
TEST=On link, 'temps' shows all temperature readings.
Cover each sensor with hand and see object temperature rise.
Compilation succeeded on bds/adv/daisy/discovery.
Change-Id: I3c44c8b2e3ab2aa9ce640d3fc25e7fba56534b86
You can now enable/disable tasks more easily.
To conditionally compile a C file depending on the task FOO activation,
just write something like that in the build.mk file :
common-$(CONFIG_TASK_FOO)+=foo_source.o
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make all BOARD=link && make qemu-tests
Change-Id: I760fb248e1599d13190ccd937a68ef47da17b510
For bringup, this powers on the x86 unconditionally.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7528
TEST=none
Change-Id: Ib23e56d38ab42f8d8a4dbd1ba9dce12f0c3eeec9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7499
TEST=press and release power button; should see debug messages
Change-Id: I8909ae4643afc98753edb690771618ad43135e3e
By default the scanning code would pull-low all column pins and listen to
any key press interrupt on input pins. This can save power compared to the
repeatly polling.
Once a key is pressed, the scanning code enters the busy loop and pull-low
column pins one by one. Then generate the scan code to host.
The code keeps polling after 1 second after no key is pressed. Then goes
back to interrupt mode.
BUG=none
TEST=Manual tested on S*y machine.
Change-Id: I0bf8877450dbd6ad1197a2fe1714ab755dc49a80
Implement EC lid switch interrupt handler and debouncing.
BUG=chrome-os-partner:7363
TEST=Manually test lid switch output signal is correct.
Use UART console to see debouncing is correct.
Change-Id: I74aad63330716da017fc4a57002349461c6a9b26
