Remove redundant 5V source PDOs in source cap packet. We only
need one 5V advertisement with the maximum current that we can
provide.
BUG=none
BRANCH=samus
TEST=make buildall
Change-Id: I94a01813787eb92fafbf600dcbbc8a2f0aa69e2b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227392
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Add support for PR_SWAP command as per PD specification.
BUG=chrome-os-partner:28343
BRANCH=samus
TEST=test by connecting two samus' and running 'pd 1 swap power'
from console. verified that both sides switch power roles by
observing console output. also tested against third party
devices.
Change-Id: I0e8738b544de9f9a4348250630e67d0fefb4486d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225559
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Update source and sink capacity tables for all PD boards. As
per spec, the first entry in both tables must be a fixed power
supply PDO. Added dual-role capable bit to fixed PDOs and added
new state variable to keep track of that information for each
port. This will be used to make decisions in charge manager and
to pass up via host commands.
BUG=chrome-os-partner:28869
BRANCH=samus
TEST=make buildall. use "pd 1 status" to check
if part partner is dual-role capable and check zinger is not,
C to A receptable adapter is not, and another samus is.
Change-Id: I49f034a372bc145cd524577c17ca210eec4c1013
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/227170
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Now that the problem with UART in STOP mode is fixed, let's enable low
power idle for Ryu P2 boards.
BRANCH=None
BUG=chrome-os-partner:33219
TEST=Shut down the AP and unplug AC power. Check the EC goes into
deep-sleep by 'idlestat'.
TEST=Power up the AP and check the EC stays awake.
Change-Id: Ib8ad3763407315ec0f95551fa0fdd258a060e113
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226312
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
We defined the DMA channel for UART Rx DMA to use, but we didn't
actually enable it.
BRANCH=None
BUG=chrome-os-partner:32660
TEST=Check the console is still responsive
Change-Id: I0dcbeeccb3a4213305c84ec5238e6e9dbee09b33
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225280
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
There is no external pull-up on UART signals and this could lead to
garbage characters received. Let's enable the internal pull-up to avoid
this.
BRANCH=None
BUG=None
TEST=On a Ryu board with which UART Rx gets garbage when servo is not
connected, check that we don't get garbage characters anymore.
Change-Id: I014b399dfecc1b8495cce7c80c481c3668976084
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225095
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The battery cut-off is achieved by putting BQ27742 in SHUTDOWN mode.
BRANCH=None
BUG=None
TEST=Unplug AC and do 'cutoff' in EC console. The EC console goes
unresponsive.
Change-Id: I4a1aa359d79333d47aaf53b685a52960e5dfd652
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225007
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is needed for inductive charging to work.
BRANCH=None
BUG=chrome-os-partner:31392
TEST=On Ryu, close the lid and check BASE_CHARGE_VDD_EN is toggled.
TEST=Open the lid and see the AP booting.
Change-Id: Ib153c08a803088b832c7d65261c71605c3378d5f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224804
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Unlike STM32F0, we need to configure alternate function for USB module
on STM32F373. Adds the pin configuration for ryu_p2 and also adds the
proper configuration step in USB module.
BRANCH=None
BUG=chrome-os-partner:32660
TEST=With changes to enable USB on ryu_p2, see the device enumerated
Change-Id: I5e2cb7cfc44a1bb88bae69804021c783c8d17968
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224789
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Ryu uses the same LEDs as Samus, so let's use the same brightness values
for them. Also, increase the stack size for console task so that
'lightbar' command doesn't cause stack overflow.
BRANCH=None
BUG=chrome-os-partner:32203
TEST=See lightbar in action on Ryu.
Change-Id: I89b61f6df2751c9dd6b40f9e374f01e1b0dfd504
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224426
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The new build target ryu_p2 is mostly based on ryu. On ryu_p2, we have a
new EC chip with bigger flash, so make the corresponding changes:
- Pinout changes
- HW Timer: TIM5
- USB PD Tx Timer: TIM3_CH4
- USB PD Rx Timer: TIM2_CH4
- Use UART2 for EC console
- Disable UART Tx DMA as it conflicts with USB PD Tx DMA
- Use 24MHz HSE x2 = 48MHz for SYSCLK
BRANCH=None
BUG=chrome-os-partner:32660
TEST=Sanity check on a new board:
- i2cscan
- PD negotiation
- UART console
- gettime
Change-Id: I4ef6b53a928a2777721e3874032aeb0e6b2b4c92
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221404
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
