Add flag for whether or not device plugged into a given port is a
dual-role PD device. For now, the dual-role flag is always 0, but
need to add the flag to the host command now for compatibility
in the future.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=load onto samus, run ectool --name=cros_pd usbpdpower and
verify that for anything plugged in it says "dedicated charger"
Change-Id: I2d3c8c149802492f27a87a47aaa68fbf505ee7a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226820
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Get type-c port power info including power role, charger type,
and charging info. Also added host command to get number of type-c
ports.
Also adds new charging suppliers for pericom identified chargers
including DCP, CDP, SDP, proprietary, and other chargers. Priority
of these for charging is set in samus board file.
BUG=chrome-os-partner:32650
BRANCH=samus
TEST=run 'ectool --name=cros_pd usbpdpower' and verify correct
status with minimuffin, zinger, and type-C to type-A adapter.
Change-Id: I1dabbe7de4185a23df5684a5ea9a2d944f1f6ff5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223523
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The original algorithm is given in the TMP006 User's Guide
(SBOU107.pdf). The algorithm we previously implemented is that,
plus some additional and completely undocumented massaging of the
Tdie and Vobj registers. The original meaning of that hack is now
lost in the mists of time, thanks to our email retention policy.
This CL introduces a new algorithm variant, but at least this
time the details are in the bug report. It's essentially the same
as the User's Guide algorithm, except that we apply one-stage FIR
filters to the Tdie input and the Tobj output.
There are five new parameters: d0, d1, ds, e0, e1. Refer to
tmp006_read_object_temp_k() in ec/driver/temp_sensor/tmp006.c to
see how these new parameters are applied.
CAUTION: The tmp006 sensor algorithm is mostly math and magic
numbers. The spreadsheet attached to the bug report has six
sheets with wildly varying values for those parameters. Since the
correct parameter values haven't yet been determined for Samus,
all I can be sure of with this CL is that it seems to work and
isn't any worse than the old one.
Oh, and note that the EC's 't6cal' console command has been
disabled until/unless we add support for floating point IO. Use
ectool from the host to get and set the params instead.
BUG=chrome-os-partner:32260
BRANCH=ToT,Samus
TEST=manual
After booting, look at the sensor values using ectool:
localhost ~ # ectool temps all
0: 312
1: 314
2: 313
Sensor 3 not calibrated
4: 311
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 306
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
Sensor 13 not calibrated
localhost ~ #
localhost ~ # ectool tempsinfo all
0: 0 PECI
1: 1 ECInternal
2: 1 I2C-Charger-Die
3: 2 I2C-Charger-Object
4: 1 I2C-CPU-Die
5: 2 I2C-CPU-Object
6: 1 I2C-Left C-Die
7: 2 I2C-Left C-Object
8: 1 I2C-Right C-Die
9: 2 I2C-Right C-Object
10: 1 I2C-Right D-Die
11: 2 I2C-Right D-Object
12: 1 I2C-Left D-Die
13: 2 I2C-Left D-Object
EC result 2 (ERROR)
...
localhost ~ #
There are six tmp006 object temps that need calibrating. The
index used for the calibration is for the tmp006 objects, not the
3,5,7,.. numbers reported for all temp sensors. See the current
values with tmp006cal:
localhost ~ # /tmp/ectool tmp006cal 5
algorithm: 1
params:
s0 0.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -2.940000e-05
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
If the s0 param is zero, this sensor is uncalibrated. The params
are entered in the order in which they're displayed You can
change any or all of the parameters. Skip the ones you don't want
to update by specifying '-' for its position. (Note: throw in an
extra '--' first so that ectool doesn't think that negative
numbers are command options).
For example, to change s0 and b0:
localhost ~ # ectool -- tmp006cal 5 1.0 - - -3.0
localhost ~ #
localhost ~ # ectool tmp006cal 5
algorithm: 1
params:
s0 1.000000e+00
a1 1.750000e-03
a2 -1.678000e-05
b0 -3.000000e+00
b1 -5.700000e-07
b2 4.630000e-09
c2 1.340000e+01
d0 2.000000e-01
d1 8.000000e-01
ds 1.480000e-04
e0 1.000000e-01
e1 9.000000e-01
localhost ~ #
Now sensor 13 (tmp006 object index 5) is calibrated:
localhost ~ # ectool temps all
0: 310
1: 315
2: 313
Sensor 3 not calibrated
4: 310
Sensor 5 not calibrated
6: 305
Sensor 7 not calibrated
8: 307
Sensor 9 not calibrated
10: 307
Sensor 11 not calibrated
12: 312
13: 313
Change-Id: I61b5da486f5e053a028c533ca9e00b9a82a91615
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224409
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With only four LED segments, it's confusing to indicate a power
percentage by dimming the top segment unless you can see the
indicator smoothly ramping up from all-off. This does that.
Kind of pretty, if I say so myself.
BUG=chrome-os-partner:29041
BRANCH=ToT, Samus
TEST=make buildall
Run "ectool lightbar demo on", then press the T key to invoke the
pattern and the arrow keys to fake the charge state.
Change-Id: Ib6a56aea56078b8c1fc9edddda469d7f41735ff7
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223300
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reboot the PD device after a successful flash so that it will boot into
the new RW. This syncs the ectool PD update to the implementation in
flash_pd.py.
BUG=chrome-os-partner:31361
TEST="./ectool --name=cros_pd flashpd 0 1 ec.RW.bin", verify flashing
succeeds and PD is rebooted after flash.
BRANCH=samus
Change-Id: I14e7dffe59fcc7ca678c76890dbc825df5b19862
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223062
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This prepends EC_ a macro exposed in ec_commands.h, moves a
macro into lbcc that is not used elsewhere, and changes lb_program
structs to lightbar_program.
BUG=None
BRANCH=ToT
TEST=make buildall -j
Change-Id: I481562da72d91f846c64cf9af40338027641462c
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222406
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The PD protocol no longer uses a SHA1 RW hash. Instead, it uses the
first 20 bytes of the SHA-256 hash. Update constants and comments
accordingly.
BUG=chrome-os-partner:31361
TEST='make buildall -j'
BRANCH=samus
Change-Id: Ice74b841dbd1d81205c1ef0079a5e18fca2153b6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222446
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
ectool autofanctrl 1 - set auto fan control for fan 1
BUG=chrome-os-partner:23803
TEST=Tested the above EC command on Auron
BRANCH=none
Change-Id: Idcd3690ad98d7965420f26f7cc445207fe73704d
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221816
Reviewed-by: Randall Spangler <rspangler@chromium.org>
First case is for legacy support
ectool pwmsetfanrpm <targetrpm> - set all fans to <targetrpm>
ectool pwmsetfanrpm <fan> <targetrpm> - set <fan> to <targetrpm>
BUG=chrome-os-partner:23803
TEST=Tested the above EC commands on Auron
BRANCH=none
CQ-DEPEND=CL:220960
Change-Id: I8f447f53289abaa9c5cc1285f9f0921328fbf32c
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221291
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This diff allows the user to send small programs to the EC and
gain control of the lightbar. Right now, this is only exposed
through ectool, and sysfs support will come later.
To send a program to the EC, use
$ ectool lightbar program /path/to/program.bin
and then start running the program with
$ ectool lightbar seq program
BUG=None
BRANCH=ToT
TEST=Using the above steps with hand-assembled programs.
Checked that infinite bytecode loops do not hang the EC.
Checked that bad opcodes exit with an error.
Stress tested pushing programs and changing sequences.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Change-Id: I635fb041a5dc5c403f7c26fb9a41b5563be9b6b7
Reviewed-on: https://chromium-review.googlesource.com/219558
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
CL provides some useful information similar to the EC console command
'pd state <port>' when host command 'usbpd <port>' is sent from host
with no additional arguments.
Also added a few build asserts for role & mux strings.
BRANCH=none
BUG=chrome-os-partner:31690
TEST=manual
ectool --interface=lpc --dev=1 usbpd 1
Port C1 is enabled. Role:SNK Polarity:CC1 State:6
# has zinger attached
ectool --interface=lpc --dev=1 usbpd 0
Port C0 is enabled. Role:SNK Polarity:CC1 State:2
Change-Id: Id44eb7bf6a6fcfa888a0008a2249601967c50bcc
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/217138
Reviewed-by: Alec Berg <alecaberg@chromium.org>
PD accessories that are RW update-able will broadcast their rw_hash
SHA1 digest upon connection to the PD MCU which will store it.
For update purposes, the host needs that accessories device id and
rw_hash to determine its proper firmware update payload.
This CL creates a host command that requests the type-C accessory info
attached to a particular port. It also implements an ectool command
to expose the host command.
BRANCH=none
BUG=chrome-os-partner:31361
TEST=manual,
# connect zinger to port 1 on samus
ectool --dev=1 --interface=lpc infopddev 1
Port:0 Device:1 Hash: 0x7f4d7a13 0xf07b65b9 0x41181e10 0xb99b3d5f 0x9dee1206
ectool --dev=1 --interface=lpc infopddev 0
Port:0 has no valid device
Also do the same on port 0 with similar results.
Change-Id: Id63c7edad77a43d43c14d8cd6bd96e08d0d9b501
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/216814
Reviewed-by: Alec Berg <alecaberg@chromium.org>
PD accessories that are RW update-able will broadcast their rw_hash
SHA1 digest upon connection and remain in RO briefly for a response.
In order to speed-up the response and decouple common case of
accessory is up-to-date, the PD MCU will keep a small 4 entry table of
PD accessory device ids and their corresponding RW hashes for quick
lookup.
The AP will be the source of new updates and their corresponding
device id's and RW hashes and therefore needs a method to update the
PD MCU table.
This CL creates the table, host command & ectool command to facilitate
future driver / daemon to update the RW hash entries.
BRANCH=none
BUG=chrome-os-partner:31361
TEST=manual,
# from AP
for i in `seq 1 8` ; do
ectool --dev=1 --interface=lpc rwhashpd $i $i $i $i $i $i
done
# from samus_pd console
pd rwhash
Device:5 Hash: 0x00000005 0x00000005 0x00000005 0x00000005 0x00000005
Device:6 Hash: 0x00000006 0x00000006 0x00000006 0x00000006 0x00000006
Device:7 Hash: 0x00000007 0x00000007 0x00000007 0x00000007 0x00000007
Device:8 Hash: 0x00000008 0x00000008 0x00000008 0x00000008 0x00000008
Change-Id: Ibe87b3594793cd5215eba42160489b26974aadbc
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214366
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This adds a new host commmand for sending RW updates to PD devices.
The host command has a variety of sub-commands for performing the
update, including: erase RW, reboot, write new hash, write flash.
To program zinger RW, you should send host commands in this order:
write new hash to all 0's
reboot (zinger boots into RO since RW hash doesn't match)
erase RW
write flash
write new hash to match contents of RW
reboot
This also adds an ectool command to write a new RW. Just pass it
the RW .flat or .bin file.
BUG=chrome-os-partner:31361
BRANCH=none
TEST=ectool --dev=1 --interface=lpc flashpd 0 0 zinger.RW.flat
Change-Id: Ia81615001b83ad7ee69b1af2bf1d7059177cde04
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213239
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows sending host commands to the PD chip through the EC.
The --interface option allows forcing a particular host interface.
This is necessary at present because the crosec device driver doesn't
support host protocol v3 so only has 8-bit command numbers.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=from EC console,
ectool version -> prints EC version
ectool --interface=lpc --dev=0 version -> prints EC version
ectool --interface=lpc --dev=1 version -> prints PD version
ectool --interface=lpc --dev=2 version -> prints error
ectool --interface=i2c version -> can't find EC
ectool --interface=dev version -> prints EC version
Change-Id: I9dd10578dac77e3e104d19e2f37759814eec6ca2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207948
This is needed for supporting device passthru. Right now, the --dev
option simply prints an error.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=manual
ectool -> prints an error
ectool help -> prints list of commands
ectool version -> prints EC version
ectool --dev=0 version -> prints EC version
ectool --dev=1 version -> prints error about bad device 1
ectool --dev=0 -> prints an error (because there's no command)
ectool --dev=0 foo -> prints 'unknown command foo'
Change-Id: I0f431a4789428cd6cc8ef48b396b38237935282a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207904
ectool must support all prior versions of commands that shipped
EC binaries use.
BUG=chrome-os-partner:29830
BRANCH=None
TEST=Manual
With an EC that only supports version 0:
- Run 'ectool batterycutoff' -> success
- Run 'ectool batterycutoff at-shutdown' -> error with explicit
message about at-shutdown not being supported
- Run 'ectool batterycutoff foo' -> error, bad parameter
With an EC that support version 0 or 1:
- Run 'ectool batterycutoff' -> success
- Run 'ectool batterycutoff at-shutdown' -> success
- Run 'ectool batterycutoff foo' -> error, bad parameter
Change-Id: Ia88cfc5fa7c5125828ec0595f0b6a505916c97ea
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205155
Reviewed-by: Vic Yang <victoryang@chromium.org>
If at-shutdown is specified, the battery is cut off
1 seconds after the host has shutdown.
BUG=chrome-os-partner:29292,chrome-os-partner:28887
BRANCH=tot,nyan
TEST=Run batterycutoff ectool command and cutoff console
command with and without 'at-shutdown' option. Verify
the battery is cut off immediately without the option
specified and 1 seconds after shutdown with. View the
console log to see the deferred cutoff occur.
The following tests are verified on big.
console:
cutoff, AC on: system is off after removing AC.
cutoff, AC off: system is off immediately.
at-shutdown, AC on: system is off after "power off" and removing AC.
at-shutdown, AC off: system is off after "power off".
ectool:
batterycutoff, AC on: system is off after removing AC.
batterycutoff, AC off: system is off immediately.
at-shutdown, AC on: battery is cut off after 1s of shutdown.
system is off right after removing AC power.
at-shutdown, AC off: system is off after 1s of shutdown.
[84.058416 power state 3 = S0, in 0x0000]
[84.058803 power lost input; wanted 0x0001, got 0x0000]
[84.059120 power off 3]
[84.072148 Cutting off battery in 1 second(s)]
[84.123896 power shutdown complete]
[84.128790 power state 7 = S0->S3, in 0x0002]
[84.139694 power state 2 = S3, in 0x0002]
[84.150857 power state 8 = S3->S5, in 0x0002]
[84.166975 power state 1 = S5, in 0x0002]
[84.177972 power state 1 = S5, in 0x0002]
[85.080012 Battery cut off succeeded.]
Change-Id: Id4bacf79ad3add885260655f80cb8127bafe1ad6
Signed-off-by: Dave Parker <dparker@google.com>
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/203694
Reviewed-by: Vic Yang <victoryang@chromium.org>
This adds a new lightbar sequence (TAP), which temporarily displays the
battery level. It pulses if the system is charging.
BUG=chrome-os-partner:29041
BRANCH=ToT
TEST=manual
From the EC console, run
lightbar seq tap
The lightbar should change temporarily.
Then run
lightbar demo on
and press the Up, Down, Left, and Right keys to fake the battery charge
level (up & down) and the AC present state (left & right). Run the
lightbar seq tap
command periodically to watch it change.
Change-Id: I84ff928d93060f7ef7d46d608732d37cf5185aff
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202964
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds three new lightbar subcommands to the EC_CMD_LIGHTBAR_CMD host
command, allowing the AP to read the current brightness level, the
current lightbar LED values, and the state of demo mode.
Because this is new, also update LIGHTBAR_IMPLEMENTATION_VERSION. All the
previous commands are unchanged, though.
BUG=chrome-os-partner:28596
BRANCH=ToT
TEST=manual
From the AP, run these commands to see the changes:
ectool version
ectool lightbar brightness
ectool lightbar 0
ectool lightbar 1
ectool lightbar 2
ectool lightbar 3
ectool lightbar demo
The version output is different, the other commands used to just emit
errors.
Change-Id: If32a5d2388217edc3ae7b9b091d66e9d2cf753be
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/199881
Reviewed-by: Randall Spangler <rspangler@chromium.org>
While debugging reboot issue, it was difficult to get POST code from failing
boards. Currently POST code is only accessible from EC console. Not all boards
are fitted with servo board.
This patch adds Port 80 history access from ectool. Reuse command code 0x48,
EC_CMD_PORT80_LAST_BOOT with version 1.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
BUG=chrome-os-partner:28514
BRANCH=rambi
TEST=manually test on rambi to confirm port 80 history match EC console
Change-Id: If204d8fb457d8d8d18055f8282a406a35c03305e
Reviewed-on: https://chromium-review.googlesource.com/198012
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Tested-by: Wenkai Du <wenkai.du@intel.com>
ectool gpioget - returns all GPIOs (with flag info)
ectool gpioget <GPIO_NAME> - get value of <GPIO_NAME>
ectool gpioget count - returns number of GPIOs
ectool gpioget all - returns all GPIOs (with flag info)
BUG=chromium:344969
TEST="ectool gpioget [<subcmd> <GPIO_NAME>]" returns correct information
on squawks
BRANCH=none
Change-Id: Ib6f0d8135a76501f08b084bfd7eb1f2689d5d6e0
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196680
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Also adds 'battparam' console command.
BUG=chrome-os-partner:25145
BRANCH=ToT
TEST=Run 'ectool batteryparam set 0 0x1234'
'ectool batteryparam get 0'
and on the console:
'battparam 0'
'battparam 0 0x1234'
on a board that implements parameter 0.
Change-Id: I9cc54d001631f53dd39ae64cfdeececaa1747181
Original-Change-Id: Ib2812f57f2484309d613b23dab12ad43e0417bd2
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195824
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197162
Added a sub-command to the motionsense host command (0x2b) for getting/setting
the lid angle at which the keyboard is disabled as a wake source in S3. The
value can be anywhere from 0 to 360 degrees, default set to 180. Note, this
only takes affect for boards that have CONFIG_LID_ANGLE_KEY_SCAN defined.
Modified ectool motionsense command to use new host sub-command.
Also modified the lid angle measurement in the EC to be in the range [0, 360],
instead of [-180, 180], and changed casting of lid angle as an int to round
to nearest.
BUG=none
BRANCH=rambi
TEST=Tested on a glimmer:
Using default keyboard disable lid angle of 180, made sure that when lid
angle is past 180, key presses do not wake system, and when lid angle is
less than 180, key presses do wake up system.
Used ectool motionsense kb_wake to set the keyboard disable lid angle to 0.
Made sure that keyboard never wakes up the system. Set keyboard disable lid
angle to 360 and made sure that the keyboard always wakes up the system.
Change-Id: I437164c6e38c29169ef6e20e86c9cf2a1c78f86e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193663
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194172
Added enum for motion sensor ID's into ec_commands.h so that the host
can easily send host commands targeting the desired accelerometer.
Changed sensor present flag to just senosr flags, currently with only a
single mask defined for sensor present. This allows for easier future
expansion of various flags.
Also, added a motion sense module flags to the dump sub-command for flags
that represent all sensors, such as is the motion sense task active.
BUG=chrome-os-partner:27321
BRANCH=rambi
TEST=Manual test on a glimmer by testing ectool motionsense command
Change-Id: Iac052269a60db9ff4506f0490c3a0c6daad5b626
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193122
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193309
Created a host command to set/get various motion sensor parameters and
added an ectool command to use that host command.
The host command is created such that the first argument is a
sub-command. Sub-commands created include:
dump: dumps all current motion sensor data
info: returns general information about each motion sensor
ec_rate: set/get the EC sampling rate of sensors
sensor_range: set/get the sensor range (ie +/- 2G,4G,8G)
sensor_odr: set/get the sensor output data rate (ie 50Hz, 100Hz, ...)
For sensor_range and sensor_odr parameters, since the host doesn't know
what are valid values for the parameter, the host can specify to round
up or down to the nearest valid value. For example, the host can specify
to set the output data rate to at least 100Hz, and the EC will return
the closest valid output data rate that is at least 100Hz.
BUG=chrome-os-partner:27321
BRANCH=rambi
TEST=Test on a glimmer using ectool from vt-2 prompt:
> ectool motionsense help
Usage:
motionsense - dump all motion data
motionsense info NUM - print sensor info
motionsense ec_rate [RATE_MS] - set/get sample rate
motionsense odr NUM [ODR [ROUNDUP]] - set/get sensor ODR
motionsense range NUM [RANGE [ROUNDUP]]- set/get sensor range
>
> ectool motionsense
Sensor 0: 0, 0, 1024
Sensor 1: 1024, 0, 0
Sensor 2: None
> ectool motionsense info 0
Type: accel
Location: base
Chip: kxcj9
> ectool motionsense ec_rate
10
> ectool motionsense ec_rate 1000
1000
> ectool motionsense odr 0
100000
> ectool motionsense odr 0 40000 1
50000
> ectool motionsense range 0 8
8
After running this I verified on the EC console that all the parameters
were set appropriately. I tested the EC sampling rate was 1000ms by
running lidangle on and making sure samples were displayed roughly every
second. I verified the sensor odr and range by defining
CONFIG_CMD_ACCELS and typing:
> accelrange 0
8
> accelrate 0
50000
Change-Id: I444e2f0eafabd607f1c7aa78b5c4e91f6cb06387
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/192064
Reviewed-on: https://chromium-review.googlesource.com/193307
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This replaces the obsolete and temporary (ha!) EC_CMD_CHARGE_DUMP host
command with EC_CMD_CHARGE_STATE. This is used to monitor and adjust the new
charge state implementation, including any board-specific customizations.
This command is a single catch-all command with multiple subcommands
(similar to EC_CMD_LIGHTBAR_CMD) so that we don't have to keep adding new
top-level host commands just to support incremental changes.
BUG=chrome-os-partner:23776
BRANCH=ToT
TEST=manual
From the AP, try these commands:
ectool chargestate show
ectool chargestate param
ectool chargestate param <NUM>
ectool chargestate param <NUM> <VALUE>
Watch the EC console and use its "chg" command to verify the effects of
setting various params.
Note: the Samus-specific fast-charging profile override is param 0x10000.
You can check it with the EC console "fastcharge" command.
Change-Id: Iad2f773a085bc25c05073b3eed9866f122ae9d78
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193305
Reviewed-by: Randall Spangler <rspangler@chromium.org>
On some boards, the temperature sensor doesn't route to EC.
Thus the 'ectool temps all' would get "200" for every temp sensor.
This is misleading information.
So, check the EC_MEMMAP_THERMAL_VERSION before we dump. If it is 0,
then the temp data is not filled (and properly will not be filled).
BUG=chrome-os-partner:27460
BRANCH=all
TEST=Tested on big, which doesn't have sensor routed to EC.
Change-Id: I03e9736054ed602b7cc126e9fd958e0cecea79b4
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/192149
Reviewed-by: Mao Huang <littlecvr@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is needed to calibrate the tmp006 remote sensor values.
BUG=chrome-os-partner:26581
BRANCH=none
TEST='ectool tmp006raw N' works for N=0,1,2,3
And fails with invalid param for N=4.
Data matches result of tmp006 ec console command.
Change-Id: I04ec093c7727b55caca7d02baaf373d1ff234731
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189207
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The EC already provided this information, but ectool wouldn't print it.
BUG=chrome-os-partner:23803
BRANCH=samus
TEST=from ec console, 'fanset 0 3000' and 'fanset 1 1000'
ectool pwmfangetrpm -> prints both fans
ectool pwmfangetrpm all -> prints both fans
ectool pwmfangetrpm 0 -> prints ~3000
ectool pwmfangetrpm 1 -> prints ~1000
Change-Id: I19d3081d09edd42c16bf8b0cdbc48ca58d134027
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187454
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Previously, the AP could only set the current wireless power state.
It couldn't determine what the EC would do in S3, nor could it get the
current wireless power state. Extend the wireless command to do so,
and add an EC console command to aid in debugging.
BUG=chrome-os-partner:25655
BRANCH=rambi
TEST=manual; expected numbers are from EC 'wireless' command
AP off -> 0x0, 0x9
AP on -> 0xd 0x9
AP suspended -> 0x9 0x9
AP on -> 0xd 0x9
ectool wireless 0x1 -> 0x1 0x9
ectool wireless 0xd -> 0xd 0x9
ectool wireless 0 0 0 0 -> 0xd 0x9 (and prints 0xd 0x9 to root shell)
ectool wireless 5 -1 -1 0 -> 0x5 0x9
AP suspended -> 0x1 0x9 (doesn't turn on 0x8, just turns off 0x4)
AP on -> 0xd 0x9
ectool wireless 0 0 0 -1 -> 0xd 0x0
AP suspended -> 0x0 0x0
AP on -> 0xd 0x9
Change-Id: I8ead2d4a4423b51ec4f638bf94c62de98726b25c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187273
We changed the behavior of indata.size==0 case in cros_ec kernel driver.
This breaks the nyan battery driver. Change the ectool as well.
BUG=chrome-os-partner:24851
BRANCH=nyan
TEST=verified on nyan rev B
% ectool battery
Battery info:
OEM name: SANYO
Model number: AP13J3K
Chemistry : LION
Serial number: 174E
Design capacity: 4030 mAh
Last full charge: 4030 mAh
Design output voltage 11250 mV
Cycle count 0
Present voltage 12934 mV
Present current 0 mA
Remaining capacity 3966 mAh
Flags 0x03 AC_PRESENT BATT_PRESENT
Change-Id: Id63d933802ed85d7f5d8f1c53e6389b083f41a8a
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181667
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This make minor syntactic changes and renames some camel-cased symbols
to keep checkpatch from complaining. The goal is to reduce the
temptation to use 'repo upload --no-verify'.
This is a big furball of find/replace, but no functional changes.
BUG=chromium:322144
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I0269b7dd95836ef9a6e33f88c003ab0f24f842a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180495
Move the non-core dependent code out of core/$(CORE) directory to
common/ directory.
Put all panic printing code in common/panic_output.c
Put timer management code in common/timer.c
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23574
TEST=./util/make_all.sh
use "crash divzero" and "panicinfo" on Link.
Change-Id: Ia4e1ebc74cd53da55fe24f69e96f39f512b9336d
Reviewed-on: https://chromium-review.googlesource.com/178871
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Jeremy Thorpe <jeremyt@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chromium:318342
TEST=Run "ectool boardversion" on device with and without support
for board ID. Note, boards without support will return an error.
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: Ib7599570c84a7ed5cf70ce9d8336467785b35569
Reviewed-on: https://chromium-review.googlesource.com/176543
