Cortex-m0 we supports 2 bit priorities for the NVIC, yet we clear with 0x7 (3
bits). Change so we now clear with 0x3
Also limited priority to the max available (so we don't set extra bits we don't
want or modulus the priority, otherwise setting priority 8 will actual give you
priority 0) in both cortex-m and cortex-m0.
BUG=None, discovered while looking at the code
TEST=Should be no functional change, NVIC priorities should still work the same.
BRANCH=None
Change-Id: I31ba041449cae96983753b297e2631c310a406c4
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236086
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When another task is holding the lock, mutex_lock() should call
task_wait_event_mask() to wait only for TASK_EVENT_MUTEX events.
If it calls task_wait_event(), any pending events are silently
discarded while its waiting for the the lock.
BUG=chromium:435611
BRANCH=ToT,samus
TEST=make buildall -j, and:
Before this change, I watched the EC console while shutting down
and rebooting Samus. I saw the request event arrive:
[37.576295 LB lightbar_resume() requests 5 S3S0]
[46.055725 LB_version]
But the lightbar task never saw it. Adding a bunch of debug
messages showed that it was being lost in mutex_lock().
After this change, the event is delivered:
[30.167670 LB lightbar_resume() requests 5 S3S0]
[30.171009 LB cur_seq 2 S3 returned pending msg 5 S3S0]
[30.173816 LB running cur_seq 5 S3S0. prev_seq 2 S3]
[32.410073 LB cur_seq 5 S3S0 returned value 0]
[32.410865 LB running cur_seq 3 S0. prev_seq 2 S3]
[39.938388 LB_version]
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I011838538960cc57171f0a3c4cdee113d156e9ff
Reviewed-on: https://chromium-review.googlesource.com/231370
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Do not allow rescheduling tasks if task_start() has not been called.
This fixes a bug in which if console input occurs between uart_init()
and task_start(), the MCU crashes because uart_init() enables uart
interrupts which attempts to wake up the console task when RX data
is received, which then tries to task switch before we initialized
task scheduling.
BUG=chrome-os-partner:32561
BRANCH=samus
TEST=add while(1) loop to adc_init() to simulate stalled ADC
initialization. When stalled, send console character and observe
that without this CL MCU crashes, and with this CL the MCU does
not crash.
Change-Id: I34418e88ebe0063acf1cc55ab5a57b5fddcd9d23
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221599
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
From time to time (usually under heavy interrupt load), the runtime on
Cortex-M0 was panic'ing at the "svc" instruction with a HardFault
exception (inside the wait_event() function).
The issue was probably the following :
the wait_event() code is doing an atomic_read_clear() whose critical
section disables interrupts and re-enables them using "cpsie i",
then do __schedule() call which is essentially a "svc" instruction.
According to ARMv6-m reference manual :
"If execution of a CPS instruction:
increases the execution priority, the CPS execution serializes that
change to the instruction stream.
decreases the execution priority, the architecture guarantees only that
the new priority is visible to instructions executed after either executing
an ISB instruction, or performing an exception entry or exception
return."
So, when we are executing the "svc", PRIMASK.PM can still be seen as 1
(while it was set to 0 by "cpsie i") and in that case the software
interrupt is replaced by a HardFault.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28296
TEST=run Firefly board under load for extended periods of time.
Change-Id: Ie355c36f06e6fe2fee5cca8998a469fa096badad
Reviewed-on: https://chromium-review.googlesource.com/196659
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
In order to achieve really tiny firmwares, make our runtime (tasks,
hooks, muxed timers, GPIO abstraction ...) optional.
Add 2 new build options for it : CONFIG_COMMON_RUNTIME and
CONFIG_COMMON_GPIO which are enabled by default, and ensure all the
source files are built according to the right configuration variable.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
build a minimal board with no runtime.
Change-Id: Icb621cbe0a75b3a320cb53c3267d6e578cd3c32f
Reviewed-on: https://chromium-review.googlesource.com/189403
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
