PS8751 does not restore all register contents when resuming
from low power mode. This change makes tcpm call board_init
when it stops auto-toggling so that register contents can be
restored.
BUG=b:35585399
BRACH=none
TEST=On Snappy, the board_init funciton is called every time a device
is plugged in and register contents are restored.
Change-Id: I50c51334f43c02e3c4d8453e1e966bf6eb3ce769
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/454139
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This change adds an option to pdchipinfo command to force ec to get
the version from the chip instead of the cache (if it's available).
This option will be used after firmware update, which makes the cache
value stale.
BUG=chrome-os-partner:62383
BRANCH=none
TEST=Run ectool as follows:
localhost ~ # /tmp/ectool pdchipinfo 0 on
vendor_id: 0xaaaa
product_id: 0x3429
device_id: 0xad
fw_version: 0x15
localhost ~ # /tmp/ectool pdchipinfo 1 on
EC result 2 (ERROR)
Change-Id: Icefe96d7fc1208b991a4caa13aaf4f04052edba7
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441271
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This patch adds a host command to get PD chip info.
For PS8751, tcpci_get_chip_info will fail if the chip is in
low power mode. It can be woken up by reading a random register
first then wait for 10ms.
This code doesn't have the wake-up read to avoid 10ms delay.
Instead, we call this function immediately after the chip is
initialized because it'll gurantee the chip is awake.
Once it's called, the chip info will be stored in cache, which
can be accessed by tcpc_get_chip_info without worrying about
chip states.
localhost ~ # ectool pdchipinfo 0
vendor_id: 0xaaaa
product_id: 0x3429
device_id: 0xad
fw_version: 0x15
localhost ~ # ectool pdchipinfo 1
vendor_id: 0x1da0
product_id: 0x8751
device_id: 0x1
fw_version: 0x37
BUG=chrome-os-partner:62383
BRANCH=none
TEST=ectool pdchipinfo 0/1. make buildall
Change-Id: I3f1667d00ce1826936d90882ada1df6ed6b0ea37
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/433166
BUG=chrome-os-partner:54668
BRANCH=none
TEST=Verified SNK is detected in S0 (toggle on), S3 (toggle off),
and S5 (force sink). SRC is detect in S0 only, stays detected when
entered S3, but unplug/plug while in S3 will not re-detect until
system back in S0. When go to S5, SRC will get disconnected until
back in S0, and hotplug SRC in S5 will not get detected. Checked
power role swap with another chromebook in the above scenario also.
Change-Id: I2a487fca5cb04c45524aa3efde84fcd10ff0579e
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/396918
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add API to switch the Rp pull-up value on CC dynamically at runtime.
This is a preparatory work for boards having a more complex maximum
source current policy (eg 2 ports sharing a common pool of power).
For fusb302, update the voltage thresholds for open/Rd/Ra as they depend
on the Rp (was missing from the previous change).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:56110
TEST=make buildall
Change-Id: Id3c24a31a16217075a398ec21ef58ee07187a882
Reviewed-on: https://chromium-review.googlesource.com/373501
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This allows us to specify the polarity of the alert signal for
each TCPC chip onboard, even if we have multiple instances of
the same chip.
BUG=none
BRANCH=none
TEST=built and booted on reef
Change-Id: I06a58c4e26892843243e8e98f2c86c6d3a696eb1
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360948
Reviewed-by: Shawn N <shawnn@chromium.org>
If multiple TCPCs are present on a system then we may have multiple
alert signals, each of which alerts us to the status of a different
TCPC. Make boards with external non cros-ec TCPCs define
tcpc_get_alert_status, which returns alert status based upon any alert
GPIOs present, and then service only ports which are alerting.
BUG=chromium:551683,chrome-os-partner:47851
TEST=Verify snoball PDCMD task sleeps appropriately when no devices are
inserted, and verify ports go to PD_DISCOVERY state when we attach
samus. Also verify that glados / glados_pd can still negotiate PD.
BRANCH=None
Change-Id: Iae6c4e1ef4d6685cb5bf7feef713505925a07c8c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/313209
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add a new configuration struct tcpc_config_t that initially defines the
i2c host port and i2c slave address of all TCPCs present on the board.
This will allow us to create boards with multiple TCPCs on different i2c
ports, with arbitrary i2c slave addresses.
BUG=chromium:551078
TEST=Manual on glados. Verify PD communication / charging is still
functional on both PD ports.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9b2bde85d7f1642e8727c052e064371be7967619
Reviewed-on: https://chromium-review.googlesource.com/311000
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modified TCPC layer to utilize the Power_Status and Power_Status_Mask
registers. VBUS status is stored in Power_Status and when a change
is detected, it's communicated to the TCPM via the ALERT# line.
BUG=chrome-os-partner:43440
BRANCH=none
TEST=Tested the feature on Glados and Oak connecting to both Ziger
and Samus. Verfied that VBUS status is communicated via the TCPCI and
that PD contracts are established without using the VBUS_WAKE GPIO
lines on Glados and Oak.
Change-Id: Ie5aa32eecc887f3cb00880a285f1e710b7064384
Signed-off-by: Scott Collyer <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289931
Reviewed-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
Refactor the tcpm/tcpc split such that the tcpm driver implements
the alert functionality since it may be unique for different tcpc
chips.
BUG=chrome-os-partner:41842
BRANCH=none
TEST=make -j buildall. run on samus and glados.
Change-Id: I23f2d7f8627d5337b8d001a09bf27622be24fe33
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/281631
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Changed the alert function to hold the ec_int line until
all of the alert bits are cleared. Added support for the
alert_mask register. In addition, created ec_int_status
variable to distinguish which of 3 ec_int sources is
driving the pd_mcu_int line.
BUG=none
BRANCH=tot
TEST=Tested Zinger to Glados and Zinger to Samus and verified
that it established a power contract in both cases. Did not
test Oak, but put exact same changes in board.c as in glados.
Change-Id: I372e75b8fd5d66a0c01db18b46100b86fd9ac064
Signed-off-by: Scott Collyer <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/278256
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add TCPC support for USB VID register and use that register
from the TCPM side to know when the TCPC is ready. TCPC is
ready when phy layer is initialized and CC ADC channels have
been read.
BUG=chrome-os-partner:40920, chrome-os-partner:41258
BRANCH=none
TEST=load and run glados. verify that glados EC doesn't
start sending TCPC commands until it can successfully
read TCPC VID. verify that we can boot with zinger and no
battery.
Change-Id: Iafbab529a16ff904cdb817901baac5e72e3d7220
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/277710
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Implement the TCPC RX Detect register and use it for the TCPM to
enable and disable PD communication. When no type-C connection,
disable TCPC RX so that we don't send goodCRC when we are not
ready. Once TCPM establishes a type-C connection, enable TCPC RX.
BUG=none
BRANCH=none
TEST=tested on glados and on samus. On glados, without this change,
sometimes when you plug in zinger, we get into a hard reset loop
because TCPC is sending goodCRC to source cap while TCPM is still
debouncing CC and is not ready. With this change, we reliably form
PD contract.
Also tested enabling and disabling PD comms from the TCPM console
with "pd enable 0|1".
Change-Id: I8c9e696f2597978436f6ceccfe06ffb021c95ea3
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/274811
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add first version of TCPCI (type-C port controller interface),
which is an I2C protocol for interfacing with TCPCs.
This is roughly tracking version 0.56 of the PD Interface spec.
BUG=none
BRANCH=none
TEST=tested on oak. modified oak EC to be TCPM and oak PD to
be TCPC and tested we can negotiate with hoho and zinger.
Change-Id: I83644ca83f2d3ce69d5d8356beca20a7ab155a87
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270172
Initial split of the USB PD protocol code to create the new port
controller (TCPC) and port management (TCPM) blocks. The intention
is that the TCPC code will eventually reside on a different MCU,
along with the USB PD phy layer. The TCPM will stay with the protocol
and policy layers and provide a standard interface to TCPC (over
i2c).
As a first step, this CL merely splits up the files and directly
calls functions to reach across between TCPM and TCPC.
BUG=none
BRANCH=none
TEST=tested on samus using zinger, hoho, another samus, donette,
and a third party PD charger. Tested the following:
- dual-role toggling
- forming a connection as a source and as a sink
- power negotiation at different voltages
- charging
- sourcing power to USB stick
- soft reset
- hard reset
- power swap
- data swap
- bist mode 2
- zinger remote firmware updates
Change-Id: I70bd68a003c81e075310913f10351b792f76d7e0
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/266923
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
