"Auto" mode is observed to cause problems and thus is removed. This
leaves only three modes:
- Standard downstream port. USB 2.0 mode. 500mA.
- Charging downstream port. BC1.2. 1500mA.
- Dedicated charging port. BC1.2. 1500mA.
BUG=chrome-os-partner:11550
TEST=Check all modes work as expected. Check no discharge between the
first two modes.
BRANCH=link
CQ-DEPEND=31639
Change-Id: I41102a8bc3ac34ff9a1bf4e47c89cdb93a2c4eb5
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/31616
Additional help messages and usage are gated by
CONFIG_CONSOLE_CMDHELP, so we can turn it on if there's space (adds
about 3KB to image size) and turn it off when there isn't.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual
1) help
2) help list
3) help gpioset
4) gpioset -> wrong number of params
5) gpioset fred 0 -> param1 bad
6) gpioset cpu_prochot fred -> param2 bad
Change-Id: Ibe99f37212020f763ebe65a068e6aa83a809a370
USB ports are disabled after jumping between firmware copies.
We need to record USB port state and restore them after jumping.
BUG=chrome-os-partner:9692
TEST=Manual
Change-Id: Ic5cb83bdd8e49017457f732d317a1b59ced59ead
This saves ~70mw of power.
To make this work, I also had to stretch the power button signal to
give the system a chance to come back up when the user taps the power
button.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9574
TEST=manual
For each of the following tests, wait ~15 sec after the system is
powered off to give it a chance to drop DPWROK.
1) tap power button -> system turns on
2) hold power button 1 sec -> system turns on
3) open lid -> system turns on
4) silego reset (power+refresh, or power+esc on proto1) -> system stays off
5) silego recovery (power+esc+refresh) -> system turns on
6) hold down power button and type 'reboot' on EC console -> system turns on
7) type 'powerbtn' on EC console -> system turns on
Change-Id: I781cf3e665104192521b7fb9ff75a3c3e7f43464
This is cleaner than having x86_power explicitly know about everything
else in the system that cares about power transitions.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=boot and shutdown system; still works. Mouse powered to system is off in S5.
Change-Id: Ib673ca2d9edd5473334e7604e98b99b02b768419
Disable USB ports when system is down and set USB ports to standard
downstream mode when system is up or sleeping.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:9249
TEST=Plug in a phone and see it charge when system is on.
Turn off the system and see it stop charging.
Change-Id: I02850dee7051ed6589e0f176a933069203f0efdf
This completes console output cleanup. The remaining calls to
uart_puts() and uart_printf() actually need to be that way.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
Change-Id: Ib1d6d370d30429017b3d11994894fece75fab6ea
This covers modules which need to initialize before task_start(), but
don't particularly care in what order they're initialized.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I69829aac8d1c3c14ee04916a794b84bbf03a09eb
More modules can be disabled individually through CONFIG_ defines.
Reordered early module pre-init and init, and added comments to
explain why things are ordered in main() the way they are.
Fixed a few assorted init-related bugs along the way, like st32m
keyboard scan double-initializing.
BUG=none
TEST=build link, bds, daisy
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I04a7fa51d743adfab4be4bdddaeef68943b96dec
Instead of using a runtime callback to register the console commands,
put them in a special linker section. So we can do a macro to "register"
them during the build.
It saves 684 bytes and a few microseconds at startup.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=run a few commands from the BDS command line.
Change-Id: Id33ea210b9035bf76ed720373c74c5dd24ccd1b1
Implement TPS2543 USB charging control.
It contains routine for setting each USB port as dedicated charging port
or standard downstream port. To allow us controlling the current
distributed to each port, we can select whether to allow 500mA or 1500mA
for each port.
BUG=chrome-os-partner:7476
TEST=Added USB port definition for BDS and tested GPIO output voltage
level is correct for all modes.
Change-Id: I19bc4b30d333aa802f868ebfc3a398b30e99ba0f
