Create optional config to remove 'hash' console command and undef it
for a few space-constrained boards (ryu*, samus_pd).
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual,
- compile for ryu, samus_pd and save ~400bytes
- 'hash' command no longer appears as a console command
Change-Id: I054fd4473911dd362c2c1d171ee7aaad859d893a
Reviewed-on: https://chromium-review.googlesource.com/238433
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
For P3, we'll use PI3USB9281A, which fixes the I2C clock problem. Let's
remove the workaround and leave the clock enabled all the time.
BRANCH=Ryu
BUG=chrome-os-partner:31526
TEST=Boot on Ryu
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I05a3ebbff82282b69e3c5573608e500a34d370c0
Reviewed-on: https://chromium-review.googlesource.com/231180
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This enables forwarding of the local PD/EC console
over debug USB. It gates the console functionality
based on the CCD mode that is set.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable partial CCD mode on ryu and verify that it is
enumerated by the host correctly, but doesn't respond
to console input, and doesn't generate output.
Enable full CCD mode on ryu and verify that it is
enumerated and that the console works as expected.
Verify that the console still works by default on the
discovery-stm32f072 board.
Change-Id: I0325ce9689486c41387d6075330be1d7d42f1d42
Reviewed-on: https://chromium-review.googlesource.com/229342
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This provides a framework for additional work. It
exposes an API (ccd_set_mode) that can be used by the
PD code to enable Case Closed Debug. Enabling CCD will
result in the USB 2.0 lines on Ryu (proto 2) to be
disconnected from the AP and for the USB peripheral to
be enabled and connected to the host. The result is
an enumerated device with no interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable CCD ryu_p2 and verify that it is enumerated
by the host correctly. This requires a reworked
Ryu (proto 2 with pullup).
Change-Id: I1fbecdd5f94a61519cfc18c5e087892c6bd77fde
Reviewed-on: https://chromium-review.googlesource.com/229139
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This simply renames ryu to ryu_p1, and ryu_p2 to ryu. 'ryu_p1' will be
kept for a while and will be decommisioned when most developers make
switch to the new boards.
BRANCH=None
BUG=chrome-os-partner:33583
TEST=Build ryu and boot on P2 board.
Change-Id: Ief61c64c6aefdaeae76ac7b86e0ea28131810aa1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The battery cut-off is achieved by putting BQ27742 in SHUTDOWN mode.
BRANCH=None
BUG=None
TEST=Unplug AC and do 'cutoff' in EC console. The EC console goes
unresponsive.
Change-Id: I4a1aa359d79333d47aaf53b685a52960e5dfd652
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225007
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is needed for inductive charging to work.
BRANCH=None
BUG=chrome-os-partner:31392
TEST=On Ryu, close the lid and check BASE_CHARGE_VDD_EN is toggled.
TEST=Open the lid and see the AP booting.
Change-Id: Ib153c08a803088b832c7d65261c71605c3378d5f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224804
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When the cable flip button is pressed, instead of only flipping on
Plankton side, we should also signal the port partner to flip. This is
done by sending a custom VDM. Upon receiving the flip VDM, the port
partner is responsible of flipping the DP/USB polarity.
Note that the "flip" here only affects the superspeed lanes. The CC
lines polarity is not changed. We need this for factory test automation,
and this "flip" function should only be used for testing purpose as it
clearly violates the USB PD spec and it only works on devices that
accept the custom flip VDM.
BRANCH=Samus
BUG=chrome-os-partner:32163
TEST=COnnect Plankton and Ryu. Press the button on Plankton and make
sure the polarity GPIOs on Ryu are negated.
Change-Id: I7ee5ea70067de4f422a7478623fe7fe8d3724372
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/223325
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add support for enabling Vconn on Raiden ports by defining
CONFIG_USBC_VCONN. This is enabled by default for ryu, samus,
and fruitpie.
BUG=chrome-os-partner:30445
BRANCH=samus
TEST=Load onto samus. Make sure we can still charge from zinger.
Plug in type-A to type-C adapter with pulldown and see that samus
becomes power source. Do a gpioget and verify that only one VCONN
GPIO is enabled (low), and the VCONN that is enabled is opposite of
the polarity queried by pd 1 state. Try both ports, both polarities
and make sure the correct VCONN gpio is enabled.
Change-Id: Icea4c18b9c813cf7e8e21fd4f455bbd5fb4dbc91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222850
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for enabling USB type-C Vconn by defining CONFIG_USBC_VCONN.
Enable Vconn support for samus, ryu, and fruitpie.
BUG=chrome-os-partner:30445
BRANCH=samus
TEST=make buildall
Change-Id: Ibe247286c96fd5a8fa12c88a4e3a5fea02997134
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222284
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Changed sending of info VDM from the UFP side in SNK_DISCONNECTED
to the DFP side in SRC_READY to match the PD spec. Only the DFP
is supposed to send VDMs, and by default the power source is the
DFP. This affects simple DFPs such as power adapters, they must
initiate the info VDM once a power contract has been negotiated.
BUG=none
BRANCH=samus
TEST=load onto samus_pd and zinger and make sure that when you
attached zinger to samus, samus receives info VDM and prints out
something like:
VDM/7 [11] 18d1000b
Dev:1 SW:2280 RW:0
Change-Id: I16ceac31939fdc1c74be7323e628dd8706e1283b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221174
Reviewed-by: Todd Broch <tbroch@chromium.org>
Currently, when an assertion fails, the error message is like:
ASSERTION FAILURE '1 + 1 == 3' in command_apreset() at common/chipset.c:24
To save flash space, let's add an option to remove the failed
expression and function name. The error message becomes:
ASSERTION FAILURE at common/chipset.c:24
BUG=chrome-os-partner:32203
TEST=make buildall
TEST=Add an assertion and triggers it. Check error message.
BRANCH=None
Change-Id: Ie323d5b43cbff2cd8f6cd5bb46c1f34ecd16bd5e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219670
Reviewed-by: Randall Spangler <rspangler@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Hibernate is not supported on STM32F0. Disable system hibernate so that
the system doesn't auto-reboot after an hour in G3. This also benefits
us in terms of firmware size.
BUG=chrome-os-partner:31665
TEST=Boot on Ryu. Check 'hibdelay' and 'hibernate' commands are absent.
TEST=Boot Ryu from G3.
TEST=Change default hibernation delay to 1 second. Put system in G3.
Check it does not reboot.
BRANCH=None
Change-Id: Ia01d2d74bc5c22c01e29e5877bd4bd38ee7dddc8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214834
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Every time a type-C source is plugged in, send a special VDM to
read device info. Device info will contain RW Hash (sha1), a
unique hardware descriptor (USB_PD_HARDWARE_DEVICE_ID), a
software version number just for debugging (USB_PD_DBG_SW_VERSION),
and a flag for if the device is in RW. This feature is off by
default and can be turned on by defining
CONFIG_USB_PD_READ_INFO_ON_CONNECT, currently defined for samus
and ryu only.
Renamed the read RW_HASH VDM to READ_INFO since it now returns
more than just the hash.
When device info is received, we store the RW hash. In the future
we will use this to check if device needs an update.
BUG=chrome-os-partner:31361
BRANCH=none
TEST=load onto a samus and a zinger. test when you attach zinger
we send a VDM, and we get device info printed to console. also
use "pd 0 hash" to query last hash received.
Change-Id: I0ca57651cf8506ea738b080a6cf8e7b020ef8724
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213832
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
As a short term workaround for the I2C problem of PI3USB9281, we're
gating its SCL input when it's not addressed. This workaround will be
removed once we have the silicon fix.
BUG=chrome-os-partner:31526
TEST=Sanity check on P0 boards.
BRANCH=None
Change-Id: I57daf25f2ad2d94ac7e4192050b4d6bbdae9d51d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214064
Reviewed-by: Randall Spangler <rspangler@chromium.org>
During flash erase operation, read is stalled and thus interrupt might
be serviced later. This can cause PD communication to fail and thus the
board reboots if there is no battery. Print a warning message in this
case.
BUG=chrome-os-partner:31127,chrome-os-partner:31207,chrome-os-partner:31362
TEST=Boot Ryu, on software sync, see warning message before board
reboots.
BRANCH=None
Change-Id: If327a4f533fd2dfa83f92531148bd52ace927e03
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212264
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Set input current limit based on the max current from the
PD negotiation. For samus, this information is passed to
the EC as a host command. For ryu, the max current is set
directly following a negotiation.
CONFIG_CHARGER_INPUT_CURRENT is now just the default limit,
but after a successful PD negotiation, the limit can be
raised.
Note, for now the input current limit for samus is set to
2/3 of the value negotiated for. This is due to hardware
problems measuring input current on p2b boards.
BUG=chrome-os-partner:28532, chrome-os-partner:24461
BRANCH=none
TEST=tested on a samus. Verified input current limit using
"charger" console command from EC. Input current limit
after a reboot is 512. When zinger is plugged in, it jumps
to the appropriate value (currently 1280mA), and when
the negotiation is changed using the "pd 0 dev 5" command
on the PD console, the input current limit is adjusted to
match (2000mA).
Change-Id: Iab9186a0f9814655e3240217a9baf4a38f15f84d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211023
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On Ryu, we are using TPS65913, which doesn't support the 8-second long
key press power-off. Let's switch to firmware timer.
BUG=None
TEST=Do a long power button key press, and see the AP powering off and
not restarting.
BRANCH=None
Change-Id: Ic9eb6d525498c7cdedf8f053dd0a2fa2b568a443
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209850
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
We have three copies of 'typec' commands in three different boards. The
commands current mix hardware-specific logic and console command logic
together. Adding a board_get_usb_mux() interface to separate the logic
and deduplicate the console command logic.
BUG=None
TEST=make buildall
TEST=Test 'typec' command and verify GPIO settings.
BRANCH=None
Change-Id: Ie1825f49d32609c732db384679cb917f2f1a4082
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209955
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Like Samus, the battery can be placed into a disconnect state. This CL
implements the necessary function to determine if it is so and kick it
out of this state when possible.
BUG=chrome-os-partner:30633
TEST=Put a battery in this state. Plug in AC. Verify the battery is
revived.
BRANCH=None
Change-Id: I074a72a2efe3844cbdfb0eda16a25fd8d1755a9b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209634
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Only one EC was an i2c slave, samus_pd.
Now we have 2 more, ryu and ryu_sh (sensor hub).
Define a new variable: CONFIG_HOSTCMD_I2C_SLAVE_ADDR
TEST=Compiled
BRANCH=None
BUG=chrome-os-partner:30740
Change-Id: I484aaf5ca72f14a91ce261b91fbe600dca3474dc
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/208978
Reviewed-by: Randall Spangler <rspangler@chromium.org>
